Job Responsibilities:

• Receive, record, and process daily purchase requisitions from the production department
• Negotiate with the supplier for the most cost-effective deal
• Manage and liaise with vendors to ensure on-time delivery of goods
• Liaise with internal department personnel on project-related activities
• To attend meetings to understand and support project activities
• To perform any other duties as assigned by the immediate supervisor

Job Requirements:

• At least Primary/Secondary School/"O" Level in any field
• At least 2 years of working experience in the related field is required for this position
• Able to effectively communicate with suppliers and vendors

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

HR FUNCTIONS

• Assist the HR & Admin Manager in handling full spectrum of HR functions - recruitment, selection & employment, all Work Pass matters.
• Responsible for the full payroll functions in consultation with HR & Admin Manager
• Maintain, upkeep and ensured timely and accurate updates of HR database, all employee personal files and records are complete and treated in the strictest confidence
• Assist the HR & Admin Manager in reviewing training plans and career development for staff.
• Responsible to manage and update Time Attendance for payroll processing
• Manage and Liaise with Dormitory Operators for Dorm Check in/out, and other matters
• Assist the HR & Admin Manager in handling company insurance claims and reviews (Group Medical, Workmen Injury Compensation, Vehicle Insurance)
• Prepare submissions to government agencies, such as IRAS, NS claims, Government Paid leave claims and etc
• Conduct and complete market surveys from MOM, IRAS, CPF, WDA and various HR related surveys.
• Other ad-hoc duties as assigned by the Management.

ADMIN FUNCTIONS

• Lead HR Admin team, manage and improve the workflow to give strong support to operations and finance department
• Assist the HR & Admin Manager with vendor management and government grant applications
• Acquire and maintain office furnishing, equipment, and supplies eg. Stationery, photocopiers
• Maintain company assets such as desktops and laptops with help from IT outsourcing vendors
• Ensure that the office and pantry is well-maintained, organized and secure.

WHAT YOU NEED TO HAVE

• At least 4 to 5 years of relevant work experience in a similar role, preferably in the Construction Industry.
• Candidates with more years of experience will be considered for the Senior executive role
• Candidates with minimum GCE O level plus Certificate in Human Resource Management & above will have an advantage
• Well versed and knowledgeable in WPOL and EPOL applications and processes
• Familiar with HRIS & Payroll systems, preferably CuteOffice
• Good knowledge of employment laws and regulations
• Good communication and organization skills
• Enthusiastic, positive and resourceful
• Able to multi-task, organize, and prioritize work
• Proactive and initiative
• Preferably able to commence work at short notice

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works

· To oversee the design department and give support to junior drafter

· Any other tasks assigned by superior

I- Basic Function/General Scope of Work

The position is involved in project management for all aspects (contract, and technical, quality and project schedule etc) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to customer if any changes on the drawings.

2. Support Project manager to communicate with customer after installation team verifies all drawings prior to moving to construction phase.

3. Coordinates with installation team, customers and sub contractors during construction.

4. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Participate in final inspection and collection the data for as built drawings.

8. The position is accountable for strictly complying with CEEC’s Code of Ethics.

9. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Competencies

The incumbent should possess:-

1- a degree in Mechanical or Electrical Engineering is required/preferred.

2- a minimum 1 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in Process projects (Oil&Gas, water treatment, WTE etc) is preferred.

Additional Information

Career Level:Junior Executive

Qualification: Diploma or ITE

Years of Experience: 3 years

Job Type: Full-Time

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.

● Oversee day-to-day site activities of areas of responsibility ● Ensure that work is carried out according to the drawings and specifications ● Supervise a team of workers ● Ensure that work progresses according to schedule ● Liaise with subcontractors and authorities ● Attend meetings with consultants and subcontractors ● Conduct project monitoring to ensure quality construction and safety ● Adjusted work schedules as needed in order to meet all project deadlines planned • Carry out inspection work with RE/RTO to ensure work done in order • Coordinate and supervise the subcontractors for the assigned site activities to meet schedule and ensure quality control of the work • Monitoring and controlling unnecessary wastage of resources •Inspection work finishing and ensure specifications are met

• Perform maintenance, repair or overhaul of Air compressor efficiently and complete them in a timely manner.
• Guide and lead the team of technicians who lack experience or knowledge in troubleshooting, diagnostics and best practices in the said operation.
• Write and submit Service Reports timely in clear and logical manner.
• Communicate with Service Manager, Sales Department and Customers on job related issues, recommendations, unforeseen problems and to identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Accountable for the upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Job Qualifications:

• High competency in the operations, maintenance and repair of major Air Compressor brands (Oil lubricated screw and Oil Free) such as Atlas Copco, Ingersoll Rand, Kobelco etc.
• Familiar with the operations, maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Responsibilities

· Establish, execute plan to expand customer base and explore new areas/segments to increase sales revenue.

· Engage with customers for queries, resolve issues and follow up on inquiries.

· Respond timely to customer orders, confirm delivery dates, coordinate changes and expedite requests from customers.

· Manage and maintain a database of customer records and customer pricing.

· Prepare and track sales quotations and maintain sales pipelines.

· Provides comprehensive market intelligence, benchmarking, constant updates on price comparison cum movement in the marketplace.

· Establish rapport and build good customer relationship.

· Provides sales performance report and timeline to achieve target.

· Willingness to undertake ad hoc projects being assigned by the management.

Requirements

· Diploma level in any discipline.

· Minimum 2 years of experience in sales, sales admin support or customer service experience.

· A team player and adaptable in a highly competitive environment.

· Possess excellent interpersonal and communication skillsets.

· Strong planning, presentation and report writing skills.

· Motivated and enthusiastic with a strong drive to achieve sales target.

· Computer literacy with experience in using Microsoft Office applications.

· Independent, resourceful and enjoy communicating with all levels within an organization.

· Able to start work immediately or given short notice.

· Class 3 driving licence and own transport.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Responsibilities

Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
Lead and prepare overall concept.
Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
Review technical proposals from OEMs to ensure compliance to our design requirement.
Plan & Manage the Electrical Master document List.
Plan & Manage manpower loading.
Review cable routing, BOQ, lead engineers and drafters.

Lead the engineering design of the following activities:
Design of 230kV, 66kV, 6.6kV & LV power supply system including; Sizing of Power Generation System, transformer, UPS & DC systems.
Articulate the overall Single Line
Understand & explain Power system Analysis by ETAP
Understand & explain Protection coordination
Calculate Cable Size
Understand & explain HV, MV and LV distribution & motor starter system
Understand & explain UPS & DC system
Understand & explain Solar generation system
Understand & explain Power Management System
Plan & coordinate Electrical Room layout
Understand, explain, plan & coordinate Cable and Busduct Management System

Familiar to the following Equipment and System;
Steam/Gas turbine generator
EDG (Emergency diesel generator)
GCB/TCB/UCB
GSUT/UAT/AT
MV/LV VSDs
IPBD/SBPD/LV Busduct
HV/MV/LV Switchgear and MCC
Civil interface for switchboard installation, pull pit and penetration.

Requirements

At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC project for Power, Petrochemical and/or Waste-to-Energy plants
Bachelor’s degree in electrical engineering or equivalent
Strong background in EPC projects Strong leadership & people management
Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g SS638
Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
Able to work in collaboration with various disciplines
Able to interface seamlessly with engineering, construction, and operations contractors

Able to work on-site in construction environment

Work location: Tuas Nexus

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 10 Years of working experience in the related field is required for this position.

• Preferrable 10 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Responsibilities

• Lead, motivate, and support a large team within a time-sensitive and demanding environment, including career development plans for direct reports and problem resolution
• Manage data collection for the updating of metrics to achieve productivity targets, reduce cost per unit, eliminate errors, and deliver excellent customer service
• Partner with cross-functional teams to improve proprietary tools and systems
• Work closely with legal and safety departments to ensure that activities remain compliant
• Oversee materials and inventory
• Conduct budget reviews and report cost plans to upper management

Required skills and qualifications

• Two or more years of proven success in an operations management role
• Strong skills in budget development and oversight
• Excellent ability to delegate responsibilities while maintaining organizational control of branch operations and customer service
• Proficiency in conflict management and business negotiation processes
• Knowledge of business productivity software and an aptitude for learning new applications

Preferred skills and qualifications

• Bachelor’s degree (or equivalent) in operations management, business administration, or related field
• Working knowledge of management software programs, including NetSuite, QuickBooks, and CenterPoint Payroll
• Strong IT skills, including database development
• Multiple years of financial and account reporting experience
• Ability to communicate in more than one language

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Scope

administration: Data Entry

• Accurately inputting information into a database or spreadsheet.
• Ensuring data accuracy and consistency.
• Assist HR, purchase, account department in administrative duties
• Any other job given
• Proficient in MS Office (Word, Outlook, and Excel)

Working Schedule

• 5 days work week
• 10 pm - 6pm

Roles and Responsibilities

· Provide administrative support to office and team as required in a timely, proactive and diligent manner.

· Coordinate office activities and operations to secure efficiency and compliance with company processes and procedures.

· Assist with data entry, managing and handling documents and records.

· Preparation of tax invoices and other documents.

· Support on-boarding and off-boarding processes.

· Carry out administrative duties (liaising with customers and suppliers).

· Assist in preparation and processing of purchase orders.

· Ensure all purchasing quotation, requisition form, delivery order and other documentations are properly recorded and filed.

· Ad-hoc tasks as assigned by superior from time to time.

Requirements

· Proficient in English.

· Excellent knowledge of MS Office and office management software.

· Qualifications in secretarial and basic accounting is welcome.

· 1 - 2 years of experience in administrative role.

· Commitment to quality in performing required tasks.

· Positive, hardworking and organised.

Job Title: Sales Executive (Hunter Role)

Job Description:

Proactively identify, pursue, and secure new business opportunities in the chemical industry to expand the company's market share.

Build and maintain strong relationships with potential clients in the chemical sector.

Consistently achieve or exceed sales targets and KPIs as set by the company.

Drive lead generation through cold calling, networking, and industry-specific research to identify high-value prospects.

Deliver compelling presentations, proposals, and product/service demonstrations tailored to clients in the chemical industry.

Collaborate with internal teams to ensure smooth delivery of services to newly acquired clients.

Maintain a robust pipeline of prospects and regularly update the management team on sales progress and market opportunities.

Stay informed about market trends, competitor activities, and developments within the chemical industry.

Take responsibility for special projects aimed at driving growth in the chemical sector.

Requirements:

A Bachelor's Degree, Post Graduate Diploma, Professional Degree, or Master's Degree in Engineering (Chemical), Business Administration/Management, Maritime Studies, Marketing, Commerce, or a related field.

At least 1 year of working experience in sales or business development, preferably in the chemical industry or a related field.

Strong ability to independently generate leads and build a pipeline in a new market.

Excellent communication, persuasion, and negotiation skills tailored to the chemical industry.

Target-driven and passionate about new business acquisition in the chemical sector.

Applicants without prior sales experience in the chemical industry are encouraged to apply; training will be provided.

Full-time position available.

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 12 Years of working experience in the related field is required for this position.

• Preferrable 12 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 15 Years of working experience in the related field is required for this position.

• Preferrable 15 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.