· Install electrical apparatus, fixtures and equipment for alarm and other systems

· Install safety and distribution components (e.g. switches, resistors, circuit-breaker panels etc.)

· Connect wiring in electrical circuits and networks ensuring compatibility of components

· Prepare and assemble conduits and connect wiring through them

· Prevent breakdown of systems by routinely inspecting and replacing old wiring and insulated cables, cleaning circuits etc.

· Perform effective troubleshooting to identify hazards or malfunctions and repair or substitute damaged units

· Carry out electrical and system works using hand tools or power tools.

· Check wiring and electric status for danger and faults.

· Fit electrical system and equipment according to project specifications.

· Maintain tools and equipment.

· Perform task in accordance to safety procedures.

Read and interpret blueprints and other technical specifications to ensure accurate installation and maintenance of plumbing systems.

• Install, repair, and maintain pipes, fixtures, and appliances for water, gas, steam, and other plumbing systems.

• Inspect and test plumbing systems for leaks, pressure, and flow.

• Collaborate with other plumbers, engineers, and maintenance personnel to develop project plans and strategies.

• Adhere to safety procedures and guidelines, including the use of personal protective equipment and proper handling of tools and equipment.

Strong knowledge of plumbing systems and components, including pipes, fittings, and fixtures.

• Ability to read and interpret blueprints and technical specifications.

• Strong skills in using a variety of hand and power tools safely and effectively.

• Strong attention to detail and organizational skills.

• Excellent written and verbal communication skills.

• Ability to work independently or as part of a team.

A mechanical technician in a chemical plant plays a crucial role in ensuring the smooth and safe operation of the facility. Their job scope encompasses a wide range of responsibilities, including:

Job Responsiblities

• Responsible for the maintenance, repair, and troubleshooting of various mechanical equipment, including pumps, compressors, turbines, conveyors, and heat exchangers.
• Diagnosing faults, and carrying out repairs or replacements of piping systems, including installation, inspection, and leak detection.
• Maintenance and calibration of instruments used to monitor and control process parameters, such as pressure, temperature, and flow rate.
• Participate in the installation and commissioning of new equipment, ensuring proper alignment, connections, and functionality.
• Perform scheduled inspections and preventive maintenance tasks on equipment to identify potential problems. Adhere to safety procedures and regulations, ensuring a safe working environment for themselves and others.
• Maintain accurate records of all maintenance and repair work performed, including work orders, parts used, and repair details.
• Assist in training other technicians or apprentices.
• Managing the inventory of spare parts and tools.

Skills, Knowledge & Requirements

• Ability to diagnose and troubleshoot mechanical problems effectively.
• Strong safety awareness and commitment to safety practices and regulations.
• Ability to communicate effectively with colleagues, supervisors, and operators.
• Minimum 8 years experience in local process plants

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Role Summary:

The Lead Cost Controller will oversee and manage all cost control activities for FPSO projects, ensuring accurate cost forecasting, budget management, and financial reporting. This position will work closely with project management, engineering, and procurement teams to deliver cost-effective solutions and maintain project financial health.

Key Responsibilities:

1. Cost Control & Management:Develop and maintain project cost control systems, procedures, and tools.
   Establish project budgets, monitor expenditures, and update cost forecasts regularly.
   Ensure alignment of project costs with project schedule and scope.
   
2. Budget Preparation & Monitoring:Collaborate with project managers and other stakeholders to prepare detailed project budgets.
   Track and analyze variances between planned and actual costs, providing actionable insights to mitigate overruns.
   
3. Forecasting & Reporting:Prepare monthly and periodic cost control reports, including earned value analysis (EVA) and cost-to-complete forecasts.
   Ensure all cost data is accurate and delivered to stakeholders in a timely manner.
   
4. Risk Assessment & Mitigation:Identify potential cost risks and provide recommendations for mitigation strategies.
   Manage contingencies and ensure adequate funding is allocated for unforeseen changes.
   
5. Stakeholder Collaboration:Act as the focal point for all cost-related activities within the FPSO project.
   Liaise with procurement, engineering, and construction teams to ensure cost integrity.
   
6. Compliance & Standards:Ensure adherence to company policies, industry standards, and regulatory requirements in cost management practices.
   Support audits and reviews to verify the integrity of cost data and reports.
   

Qualifications & Experience:

• Education:
  Bachelor’s degree in Finance, Accounting, Engineering, or a related field. Professional certifications (e.g., CIMA, CPA, PMI, or equivalent) are preferred.
• Experience:Minimum 8-10 years of experience in cost control or financial management, with at least 5 years in the oil and gas industry.
  Proven experience in FPSO projects is mandatory.
  
• Skills & Competencies:Strong knowledge of cost control software/tools (e.g., Primavera, SAP, or similar systems).
  Proficient in Microsoft Excel and other financial modeling tools.
  Excellent analytical, problem-solving, and decision-making skills.
  Strong communication and interpersonal skills to interact with cross-functional teams.
  Familiarity with project management methodologies and tools (e.g., PMP, PRINCE2).
  

Responsibilities

• Must have experience in aluminium & Glass industry work
• Able to work independently with Main Contractor, Architect to resolve site issues
• Prepare tender submission;handle progress claims and progress payment, VO & finalization of accounts
• To attend site meeting whenever is required
• Materials ordering for sites.
• Any ad-hoc duties assign.
• Estimate the overall cost of the project

Requirements:

• Degree/ Diploma in Building/Quantity Surveying
• At least 5 years QS experience in alum windows & doors
• Meticulous, Independent with good communication skills
• Proficient in AutoCAD and Microsoft Office programs (Excel, Word, e.g.)
• Familar with alum profiles
• Able to work under pressure and tight deadline;

Responsibilities:

• Manages and coordinates a team of drafting and detailing engineers, cost estimators, fabrication and project team

• Ensures proper planning and execution of projects to meet or exceed performance indicators in terms of quality and timeframe

• Oversees the planning of project operations and resolves technical and scheduling issues on-site

• Main point of contact and liaison between project teams and the client's representatives, consultants, and relevant authorities

• Review contract, design drawings, specifications, and bid documents

• Implement effective contract and claim management to increase the contractual margin and protect the Company against liability claims

• Site visits to review the progress of your job

• Monitor compliance of work with workplace safety and health regulations

• This job description is not all-inclusive and may include other duties as assigned

• Candidates should be able to manage multiple projects of various sizes and levels of complexity.

Requirements

• Minimum 5 years of Project Management experience.

• Diploma or equivalent Bachelor's Degree in Construction Management, Structural/Civil Engineering

• Experience with fabrication and installation of structural steel and miscellaneous metals

• Strong analytical, written, and verbal skills.

• Strong computer skills, including AutoCAD, Microsoft Office Suite Project setup

Kindly provide your expected salary, last drawn salary, and reason for leaving in your CV/Resume

Job Description

1. Assist the Project Manager with preparation of overall cost and progress reports and other matters related to schedules, cost and materials.

2. Assists the Project Manager and supervise Document Controller to implement systematic document control and filing procedures.

3. Liaise and coordinate with Engineering and Procurement Departments for preparation of monthly progress reports prior to Project Manager’s approval.

4. Coordinate with the Construction department leaders on progress monitoring and recording.

5. Prepare and record change proposals for the contract between Contractor and Client.

6. Assist PM organize tender activities and coordinate in disciplines, vendors for tender preparations

Requirements:

Diploma/Bachelor's degree in any discipline of Engineering

Fresh graduates are welcome to apply

Authorities and Responsibilities

1. To organize, co-ordinate, check and ensure all production activities follow as plan.
2. Calculate machine cycle time and organize production schedule base on machine capacity and capabilities
3. Plan manpower resources and delegate machining job to machinist
4. Verify program issue to workshop
5. Analyze and provide solution to solve problems between programmer and production dept.
6. Analyze monthly machining and scrap report
7. Good supervisory skill, people skill and 5 ‘S’ housekeeping
8. Good writing and communicating skill
9. Good in mechanical process, such as machining process, H/T, jig and fixture etc.

Competence Requirements

• Preferred NTC 2 / Diploma in Engineering discipline or equivalent.
• Minimum 3 years of working in related industry, and having 2 – 3 years of supervisory experience and preferably with working knowledge in machining processes.
• PC literate
• Possess excellent interpersonal communication skills and is an effective team player who is also self driven with a strong achievement orientation.

We are seeking a skilled Observability Engineer with at least 2-3 years of experience in observability to join our dynamic team. In this role, you will be responsible for implementing, managing, and optimizing observability tools. You will work closely with cross-functional teams to ensure that our systems are monitored effectively, and issues are identified and resolved proactively.

Key Responsibilities:

• Design, implement, and maintain observability frameworks using tools such as Prometheus, Grafana, ELK Stack, tableau or similar.
• Design, implement, and maintain Monitoring tools such as BMC, CA, SolarWinds, SCOM, Dynatrace, Datadog or similar.
• Create and manage dashboards, visualizations, and reports to communicate system health and performance metrics.
• Collaborate with the sales team to understand client requirements and demonstrate how our observability solutions can address their specific needs.
• Prepare and deliver presentations, demos, and workshops to potential clients showcasing the capabilities and benefits of our observability tools.
• Troubleshoot and resolve tools-related issues in a timely manner.
• Assist in the training and mentoring of team members on observability and monitoring tools and practices.

Job Requirements:

• 2-3 years of experience in software development, Implementation, operations, or a related field with a focus on observability tools.
• Proficiency in implementing and managing observability tools.
• Solid understanding of cloud platforms (AWS, Azure, GCP) and containerization technologies (Docker, Kubernetes).
• Experience with scripting languages (Python, Bash, etc.) for automation tasks.
• Knowledge of best practices in monitoring, logging, and incident management.
• Strong analytical skills with the ability to diagnose issues and propose effective solutions.
• Excellent communication and collaboration skills, with a proactive approach to problem-solving.
• Technical experience in Enterprise Monitoring tools such as Dynatrace, Grafana, BMC,
• Knowledge of Automation tools, Cloud Technologies and DevOps Concepts, Open systems and Networking Technologies
• Good knowledge in various monitoring tools e.g. BMC, SolarWinds, CloudWatch and Azure.
• Experience with configuration management tools (Ansible, Terraform, etc.).
• Familiarity with APM (Application Performance Management) tools such as New Relic, Dynatrace, or similar.
• Understanding of network protocols and architectures.
• Experience with orchestration tools (e.g., BMC, Kubernetes, Apache Airflow, Jenkins) to create and manage automated workflows for deploying, monitoring, and scaling observability solutions.

Preferred Qualifications:

• Proficiency in observability tools (e.g., Grafana, ELK Stack, Datadog, Prometheus etc).
• Proficiency in ITOM tools (e.g., BMC, Dynatrace, CA, SCOM, IBM, SolarWinds etc).
• Strong understanding of monitoring and logging frameworks.
• Experience with distributed systems and microservices architecture
• Ability to write scripts for automation and data analysis.
• Experienced in cloud platforms (AWS, Azure, GCP) and their monitoring services.
• Experience with CI/CD pipelines and infrastructure as code (IaC) tools like Terraform or Ansible
• Relevant certifications in cloud computing, DevOps, or observability tools can be a plus.

Work location: Jurong East

Job Description

• Establish and maintain communications with internal stakeholder and client to ensure accurate and timely flow of the documentation deliverables.
• To manage all documents for the project
• Perform all works which include filing, typing, photocopying, fax and other works being assigned from time to time.
• Maintaining and updating the database
• Ensure all incoming and outgoing correspondences/drawings/documents/reports are organized according to Project Filing Code
• Receiving and checking all incoming correspondence
• Review each document for conformity and accuracy prior to submission to client.
• Keep all project documents orderly complete and categorized for easy accessibility to specific records and projects.
• Ensures delivery and receipt of all documents by deadlines.
• Makes sure that controlled copies of latest approved documents are given to the appropriate staffs.
• Maintains an updated records of all approved documents.

Requirement

• At least NITEC, Diploma, Advance Diploma in Engineering field.
• Must have the ability to communicate effectively with both technical and non-technical staff.
• Proficient in MS Office.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.
• Ensuring each stage of the project happens on time, on budget and to a high standard.
• Liaising with staff at every level.
• Sharing regular progress report with top management team
• Working in an office or onsite.

JOB SCOPE:

- Handle overseas sales and operation department

- Dealing with overseas agents

- Marketing/Business development

- Handle project cargo

REQUIREMENT:

- Typically requires a minimum of 8 years of related experience

- Experience with developing or managing budgets

- Effective communication, collaboration, negotiation, leadership, coaching, mentoring and facilitation skills

- Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Responsibilies:

1. Provide Technical support and update customers on project development timely.
2. Communicate and coordinate with customers and relevant parties pertaining to technical requirements and engineering aspect of the assigned projects.
3. Plan, monitor and control all assigned projects are delivered within the given schedule.
4. Work with inter-departments to ensure commited schedules are met.
5. Assist to prepare and compile contractual quotation for existing and new products as per customers' enquires.
6. Prepare and release job orders/purchase requisition to various departments.
7. Prepare and generate shipment documents for delivery.
8. Provide regular updates on project development timely.

Requirement:

• Minimum NITEC in Mechanical Engineering or related.
• 2 years of relevant experience
• Able to interpret technical drawing and computer literate.
• Must be result oriented, resourceful and independent.

Job Responsibilities

• Perform programming and troubleshooting on cnc machines
• Set-up and operate DMU60-eVo > CNC Milling High End Machine (5 Axis)
• Set-up and operate Mazak Integrex e-420H-II > CNC Turning & Milling Machine (5 Axis) such as Multitask CNC Machine
• Programming and drawing using Mastercam 2018 software on 3D and 5 Axis

Requirements:

• Prefer with experience in operating (DMG) DMU60-eVo CNC milling 5 Axis machine
• Prefer with experience in operating Mazak Integrex e-420H-II CNC turning & milling 5 Axis machine
• Able to read and understand all types of engineering drawing
• Knowledge of Mastercam 2018 software
• Experience in Funac control and Mazaktrol control an added advantage

Other Information:

• Company transport at Gul Circle MRT & Choa Chu Kang MRT

Job Description & Requirements

1. Assembly of higher end products which require self-interpretation and understanding of technical drawing, assembly requirements, which also includes Geometric Dimensioning and Tolerance
2. Electrical wiring and soldering for installation and assembling of mechanical and sub-assembly level components.
3. Troubleshooting of machinery, servicing and maintenance.
4. Perform testing and commissioning of machines and testers.
5. Providing smooth and continuous running and support on machines and projects.
6. To provide rework or make call for the required rework processes.
7. Providing guidance to the team of operators.

Competence Requirements

• Preferred to have NTC / Diploma in engineering field or equivalent.
• Fresh NTC / Diploma holder may be considered, else others with minimum 2 years of related work experience in manufacturing environment.
• Able to read and interpret technical drawing.

Job Summary:

We are seeking a reliable and highly organized Personal Assistant to provide comprehensive support to the CEO. The ideal candidate will be a proactive problem-solver with exceptional communication and time-management skills, ensuring the smooth execution of daily tasks and activities.

Key Responsibilities:

1. Administrative and Office Support:Manage the principal’s calendar, schedule meetings, and coordinate appointments.
   Organize correspondence, emails, and documents, responding on behalf of the principal as required.
   Prepare reports, presentations, and meeting agendas.
   
2. Personal Tasks:Handle personal errands, including shopping, reservations, and managing household needs.
   Assist with family or personal commitments, including event planning or travel arrangements.
   
3. Travel Coordination:Plan and organize domestic and international travel itineraries, including flights, accommodations, and transportation.
   Ensure all travel-related documents and arrangements are accurate and up to date.
   
4. Event Management:Assist in planning and organizing professional and personal events.
   Coordinate with vendors, service providers, and other stakeholders as needed.
   
5. Liaison and Communication:Act as a point of contact between the principal and internal/external parties.
   Maintain a high level of professionalism and confidentiality in all communications.
   
6. Task Prioritization and Execution:Anticipate the principal’s needs and proactively manage priorities.
   Maintain a task list and ensure timely completion of deliverables.
   

Qualifications:

• Education: High school diploma or equivalent (Bachelor’s degree preferred).
• Experience: Minimum 3 years of experience as a Personal Assistant, Executive Assistant, or in a similar role.
• Skills:Proficiency in Microsoft Office Suite and other productivity tools.
  Strong organizational and multitasking abilities.
  Excellent verbal and written communication skills.
  Ability to work under pressure and meet tight deadlines.
  

Job Description:

• To manage and negotiate pricing, commercial terms with local and overseas suppliers and recommend the most competitive suppliers and subcon.

• Ensure continuous supply of required goods and materials and communicate any supply problems which may pose a risk or impact on business operations.

• Negotiate contracts, improved prices and terms of business with suppliers and review opportunities to make business savings utilising negotiation and procurement best practice tools and methods.

• Review specifications and ensure materials ordered meet proper quality standard and comply to contract specifications.

• Manage and track Purchase Requisition/Purchase Order on the internal system to make sure the procurement projects are delivered on time.

• Maintain and update list of approved suppliers and their qualifications, delivery times, and potential future development.

• Keep relevant stakeholders informed on the latest progress/status of delivery within expected timelines.

• Perform other duties as assigned.

Job Requirement:

• Candidate must possess Diploma in relevant discipline.

• Minimum 2 years of experience in procurement preferably in construction/ civil engineering industry.

• Experienced with sourcing and material understanding.

• Have experiences in working in large scale projects.

• LTA Projects working experience would be an added advantage.

JOB DESCRIPTION

• Monday to Friday
• 8:00am to 3:00pm
• No experience required
• Cleaning, mopping, sweeping
• Washing of toilet

Job Responsibilities:

• Liaise with construction team to prepare document for Request for Quotation (RFQ) or Open Tender

• Source potential tenderers/subcontractors and send out invitation for RFQs

• Coordinate queries and clarifications between tenderers and construction team during RFQ stage

• Coordinate post-tender interviews between tenderers, construction team, QS team and contracts team

• Assist Contracts Manager with quantity surveying matters relevant to Sub-Contract, Works Order and Purchase Order.

• Assist contracts team in administration of subcontracts

• Handle payment request received from subcontractors and suppliers

• Preparation and submission of Variation Order & Progress Claim to Client (LTA)

• Ensure all contractual obligations are met and manage any dispute or variation

• Any other adhoc tasks assigned by Contracts Manager

Job Requirements:

• Degree in Quantity Survey, Purchasing/Procurement, Business, Engineering.

• 5- 8 years’ experience in quantity surveying and sub-contract administration of Construction Project.

• Possess the relevant tertiary qualifications in Quantity Surveying, Engineering, or Contract/Construction Law.

• Experience with LTA project is preferable.

• Lead the team in executing electrical work during the construction phase, including cable tray installation, cable pulling, panel installation, cable termination, and testing/commissioning for MV/LV switchgear, transformers, UPS, DCIS/HMI, etc.
• Monitor and inspect construction activities to ensure compliance with design documents.
• Manage a team comprising supervisors, sub-contractors, and vendors.
• Responsible for electrical interfaces with the operational team, conducting meetings, and providing technical clarifications.
• Investigate and troubleshoot electrical switchgear faults or failures, implementing effective corrective and preventive actions.
• Analyze and enhance equipment reliability to prevent recurrence, collaborating with operation groups and external contractors.
• Prepare documentation for maintenance work, ensuring compliance with safety standards, and utilizing appropriate Method Statements and Risk Assessments, meeting BCA requirements.
• Collaborate cross-functionally to ensure systems, equipment, and rooms align with internal customers' needs.
• Review inspection and testing plans for electrical and instrument system installations through relevant checklists.
• Coordinate with stakeholders to ensure the smooth completion of projects.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures.
• Witness and provide contractor resources to support FAT as required.
  Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.