Job Description:

• Responsible to qualify and approve the WPS, PQR, WQT
• Ensure consumable control system is in place and followed up during issue, usage at site.
• Identify and develop the appropriate WPS for the project based on the parent metal and joint configuration.
• Establish welding sequence for the structure to minimize of control the distortion.
• Co-ordinate with Client and Classification body on welding related issues at site on day to day basis.
• Ensure regular updating and release of the Qualification welder list for module specific for the project
• Monitor calibration of Welding equipment and other measuring instrument used for inspection of welding
• Perform surveillance inspections related to following WPS requirements and NDT activities at site.
• Responsible to trouble shot the problems related to Welding and NDT.
• Establish welding sequence for critical structure to minimize / control distortion.
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about welding control and NDT requirements
• Coordinate with production team on corrective measures related to welding issues and NDT.
• Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval.
• Review NDT operator qualification and submit for project approval.
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing.
• Carry out Audit on NDT contractors to ensure compliance with project requirements.
• Propose improvements in welding process, products etc.

Job Requirement:

• Degree in Mechanical Engineeer
• Min 3 year experiences
• With IWE certification with exposure in NDT methods

Job Description:

• Responsible to qualify and approve the WPS, PQR, WQT
• Ensure consumable control system is in place and followed up during issue, usage at site.
• Identify and develop the appropriate WPS for the project based on the parent metal and joint configuration.
• Establish welding sequence for the structure to minimize of control the distortion.
• Co-ordinate with Client and Classification body on welding related issues at site on day to day basis.
• Ensure regular updating and release of the Qualification welder list for module specific for the project
• Monitor calibration of Welding equipment and other measuring instrument used for inspection of welding
• Perform surveillance inspections related to following WPS requirements and NDT activities at site.
• Responsible to trouble shot the problems related to Welding and NDT.
• Establish welding sequence for critical structure to minimize / control distortion.
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about welding control and NDT requirements
• Coordinate with production team on corrective measures related to welding issues and NDT.
• Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval.
• Review NDT operator qualification and submit for project approval.
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing.
• Carry out Audit on NDT contractors to ensure compliance with project requirements.
• Propose improvements in welding process, products etc.

Job Requirement:

• Degree in Mechanical Engineeer
• Min 3 year experiences
• With IWE certification with exposure in NDT methods

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Duties & Responsibilities:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer and contractors
• Prepare technical engineering report and draft for shop draawing
• Check shop drawing complying to design intent
• Assists Senior Engineers in day to day activity on the projects
• Other duties related to steel structure site erection

Requirements:

• Knowledge of Structural design software TSD, Prokon, and etc
• Good internal and external networking
• Bachelor Degree in Engineering (Civil and Structure)
• At least 3 years' local experience, ideally in structural steel design
• Able to do independent structural steel work design
• 5 years experience

Job Description

• Perform the full range of automotive maintenance and repair;
• Diagnostic tests by standard procedures
• Carry out maintenance, repair, and overhaul work on vehicles,
• Ensuring minimum turnover time for scheduling repairs and inspections to meet workshop’s service standards and according to job order
• Notify the team leader of unusual repair problems that will require major repair and replacement parts for recommendation
• Requisitions and pick up vehicles and equipment parts from the store to complete work assignment
• Practice safe and proper engineering practices by manufacturer or workshop instructions and procedures
• Provide technical guidance to technicians on more complex repair work
• Performs other related duties as required by the team leader or supervisors
• Perform diagnostic procedures on all vehicle systems.
• Determine appropriate maintenance and repairs.
• Effectively use hand tools and automotive diagnostic equipment

Requirements:

• Valid Class 3 Driving License
• Minimum NTC 2/NITEC in Automotive Technology or equivalent with minimum 1-2 years of relevant experience in car servicing
• Full-Time permanent Job role
• Good team player and willing to learn

"We regret only shortlisted candidate will be notify"

· Responsible for all Electrical/Instruments/Electronic related matters

· Interpretation of all electrical & instrumentation drawings and coordinate with outsources on panel building, wiring, control sequence and PLC programming etc.

· Generate and prepare electrical wiring diagrams and installation of all electrical wiring works and control panel

· Building of system control panels, distribution/junction boxes

· Servicing, Testing and commissioning of all systems both in-house and on site (local and overseas)

· Setting and calibration of all instruments

· Trouble shooting of all electrical related problems

· Coordinate with production team on electrical installation for built systems

· Coordination with Customer on job related matters

· Provide support to Mechanical Engineer and procurement on technical aspects

· Liaise with suppliers (electrical items)

· Assist in Mechanical services

· Other Ad-hoc Duties when assigned

· Graduate with Electrical Engineering from ITE or Polytechnic

· At least 2 years of related experience

· Knowledge of Control Panel is an advantage

· At times require to attend site job at customer premises

· Transport provided in Boon Lay

· Willing to travel when assigned

· Please include your current and expected salary in your resume

Roles & Responsibilities

- delivery goods to construction sites

- obtain goods from supplier

- assist store when not doing delivery eg. checking goods, arrange goods

- maintain lorry assigned to you eg check oil / petrol level, ensure cleanliness of lorry

- send lorry for repairs or change tyres whenever necessary

- fetch workers to and from construction site

• Report to Project Director and Project Manager on site matters and progress of work
• Able to lead a team of foreign workers
• Identifying and resolving workplace problems with all the main contractors, subcontractors & suppliers
• Ensure compliance of WSH Regulation & Safety Procedures and maintain good house keeping
• Monitor, coordinate and keep track of the site work progress to ensure quality and efficient manner
• Supervise and coordinate the activities at project site
• Control and maintain the safe and smooth progress of work
• Handle project documentations, monitoring of site activities, material requisition, cost control, project supervision and schedule of works
• Supervise site progress which includes attending site meetings and discussions
• Undertake any ad-hoc project assignments as and when assigned

Job Responsibilities:

• Receiving goods and organizing stock
• Picking and packing for all local and export deliveries
• Operate forklift and reach truck
• Inventory check / Stock take
• Stuffing / Unstuffing container (Palletize or Loose)
• Handle daily incoming and outgoing stock movement
• Ensure all incoming and outgoing items are properly documented
• Able to handle all processes of receiving, inspecting incoming goods and issuing goods to customers
• Upkeep of Warehouse
• Any ad-hoc duties as assigned by Warehouse Supervisor and Management

Job Requirements:

• At least 2 years of working experience in a warehouse environment in Marine industry
• Possess N Level Qualification and above
• Must possess valid forklift license (Having Class 3 driving license will be an advantage)
• Able to multi-task, responsible with good working attitude
• Able to work in a fast pace environment
• Must be willing to work OT including Sundays and Public Holiday
• Good communication skills: spoken and written English
• Friendly, co-operative and good team player
• Able to commence work within short notice preferred

Responsibilities:

• Evaluate and prepare Technical Bid Evaluation (TBE) for vendor’s proposals
• Liaise with other disciplines and departments to optimize areas of interface, during design development, review and checking processes
• Selection of piping materials, manual valves and special piping items
• Establishing methodologies, schedules and piping material take-off items
• Perform piping planning studies and assist in plot plan and line list developments
• Preparing technical queries and liaise with site personnel
• Review all piping design deliverables and documentation done by designers & drafters

Requirements:

• Degree in Chemical or Mechanical engineering
• Minimum 5 years of piping design experience in Oil & Gas industry.
• Familiar with piping routing practices on pipe racks, sleepers, pumps, tanks, heat exchangers, pressure vessels, flares and etc.
• Hands of experience of CAESAR II is an advantage
• 3D model design
• Able to perform piping tie-in surveys and piping tie-in design
• Able to perform piping material take-off
• Familiar with respective code of practices for piping design such as ANSI, ASME, API, DEP/PTS

• Roles & Responsibilities

• Job Responsibilities:
• -To perform transportation of workers, Material purchasing and general ops assistance.
• - Maintaining the vehicle safe and clean.
• - General warehouse duties, including cleaning.
• - Assists to buy Lunch and Teabreak for Office and Ground staff.
• - Assisting with loading and unloading items from vehicles.
• - Abiding by all transportation laws and maintaining a safe driving record.
• - Preparing reports and other documents relating deliveries.
• - Other adhoc duty assigned by superior

• Job Requirements Proven experience as a Class 3 Driver.
• A valid CLASS 3 driver’s license
• A clean driving record Familiarity
• Age:No limit
• Singaporean & PR Only

• Working Hours*
• Monday to Saturday- 8.00am to 7:00pm
• Sunday - Off

Job Description

· Assist Engineering Manager for mechanical drawing and engineering document.

· Prepare Material Take Off list of ducting system.

· Make duct Spool drawings and shop drawings.

· Closely work and liaise with the Commercial Department and the Operation Department on projects.

· Provide technical support to the field works related to HVAC system and equipment.

· Technical survey and inspection at site if necessary.

· Project coordination between worksite, office, clients and suppliers.

· Any other duties assigned by the Management as and when necessary.

Requirements

· Tertiary education in engineering discipline

· At least 2 years’ working experience in HVAC systems, preferably in marine industry

· Has in-depth knowledge of HVAC Ducting System.

· Good written and verbal communication and coaching skills

Roles & Responsibilities:

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• Oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software. Looking for construction sector experienced candidate.
• Comply with company procedures and legal obligations.
• Promote and comply with environmental compliance.
• Deliver the works safely and to deadline.
• Promote best practice for Safety , Quality and Productivity.
• Ensure work is delivered defect/snag free.
• Coordinate with client and other Contractors for the project interface activities.
• Production of accurate records, drawing registers and weekly Reports.
• Must have good relationship with Site team & client technical representative.

Requirements:

• Diploma in Electrical / Electronics Engineering and minimum 3 years of relevant experience
• Familiar with automatic control engineering
• Knowledge in frequency converters, Siemens Masterdrives and Micromaster
• Knowledge of MS Office is a must, Driving license is additional advantange.
• Ability to read complex circuit diagrams
• Basic knowledge in mechanics, pneumatics and hydraulics
• Strong personality with a hands-on attiude
• Ability to work rotating shift and perform overtime on weekdays & weekends
• Self- motivated, flexible and capable of working in a fast-paced environment.
• Good verbal and written communication skills

Responsibilities:

• Report to and assist the Project Director and Package Managers in managing contracts and claims for various projects in the Environmental Engineering Services Department.
• Writing contractual letters and formulation of claims for Variation Orders, EoT and Loss & Expense.
• Liaise with various internal departments to collate relevant documents for substantiation of claims including claim consultant / delay analyst engaged by the company.
• Liaise with internal / external law firm(s) with regards to the company’s on-going disputes with its sub-contractors, vendors, consultants and/or clients.
• Update and maintain a claim register to track company’s claims against the client, consortium partners (if any), vendors and vice versa and regularly update the project team of its status.
• Ensure that all Notice of Claims and/or Further and Better Particulars are submitted to the client timely and in accordance with the contract.
• Attend all internal and external meetings as maybe required by the company.

Requirements:

• Degree in Quantity Surveying, Civil or Mechanical Engineering
• Minimum 10 years of working experience as QS with focus on contracts and claims
• Preferably working in the Main Contractor undertaking Design & Build / Turn-Key projects in Singapore.
• Good working knowledge of the PSSCOC and familiar with SOP Act
• Knowledgeable in Alternate Dispute Resolution and preferably with experience in Adjudication, Mediation and Arbitration in Singapore
• Membership with QS Professional Bodies such as SISV or RICS is preferred but not essential
• Able to work independently and be a good team player as well
• Proactive, articulate and can handle pressure.
• Possess excellent people skills with the ability to integrate within a multi-disciplinary team and communicate with external consultants and clients
• Willing to be assigned at site in Tuas.

The Engineer, Supply Engineering shall be responsible for the consistent supporting and monitoring of proposal development, tracking of projects progress, and driving development of engineering advancements across group companies in A&O (Asia & Oceania).

Key Responsibilities

• Collaborate with cross functional team to support developments of proposal for various engineering projects within group companies.
• Review and provide inputs on technical aspects, feasibility and alignment with company objectives, best practices, and standards.
• Regularly liaise with assigned project leaders in group companies to gather updates, identify challenges and ensure adherence to project timelines.
• Explore new collaborations with well-established vendors globally while concurrently assessing existing equipment manufacturers to ensure the necessary support for projects and proposals.
• Organize and facilitate engineering programs for the group companies, fostering continuous learning and professional development.
• Collaborate with safety and productivity teams to identify areas for continuous improvement in safety measures and operational efficiency.
• Regularly communicate and present to key stakeholders and Group Engineering in NSHD on proposal development, project progress, engineering programs, safety measures and other collaborative improvement initiatives

General Requirements

• Bachelor’s degree in engineering or a related field.
• Diploma in Engineering with more than 5 years’ relevant experience can be considered
• Proven experience of at least 3 years in project management and/or proposal development on Plant Process in Gas and Chemical Industry.
• Strategic thinking and problem-solving capabilities
• Possess good communication and interpersonal abilities.
• Initiative, drive, and the ability to work independently.
• English speaking & writing skill
• Result-oriented and energetic with positive attitude.
• Willing and able to travel.
• Proficiency in AutoCAD software

The School of Civil and Environmental Engineering (CEE) invites applications for the position of Research Associate.

Key Responsibilities:

• The RA will work on a project to conduct the research on the production of self-healing cement additive and its applications.
• The RA should have previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).
• Additional experience in rheology and 3D concrete printing would be preferable, but not required.

Job Requirements:

• Master / PhD in Engineering, Material Science or Chemistry
• Strong academic standing with several publications in reputable journals
• Good English speaking and writing skills
• Strong references from previous supervisors

We regret that only shortlisted applicants will be notified.

The School of Civil and Environmental Engineering (CEE) invites applications for the position of Research Associate.

Key Responsibilities:

• The RA will work on a project to conduct the research on the production of self-healing cement additive and its applications.

• The RA should have previous experience in chemical synthesis and analysis, concrete sample preparation, mechanical testing and microstructural characterization (XRD, TGA, FTIR and SEM-EDX).

• Additional experience in rheology and 3D concrete printing would be preferable, but not required.

Job Requirements:

• Master / PhD in Engineering, Material Science or Chemistry

• Strong academic standing with several publications in reputable journals

• Good English speaking and writing skills

• Strong references from previous supervisors

We regret that only shortlisted applicants will be notified.

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialization through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasizes the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Senior Research Fellow (Senior Program Manager) who will be pivotal in providing strategic financial leadership and support for all aspects of the Corporate Laboratory.

Key Responsibilities:

• Lead and coordinate concurrent research projects together with Corp Lab director, PIs and ensuring they are completed within time and budget, and meet quality standards. Work together with project PIs, and researchers in budget and funding management to ensure the well going on project.
• Monitor research project schedule, oversee delivery of project and coordinates project activities together with Corp Lab project manager. Management and scientific contribution to the research activities to meet all project milestones / deliverables / reports / budget utilization rate.
• Financial management of research projects and ensure optimal expenditure within the allocated budget.
• Accountable for financial advisory and support, advising financially and research aspect for Principal Investigators and research staff. Responsible for projects closing, including financial reconciliation and ensuring any surplus or deficit is appropriately addressed.
• Manage procurement process, including verification and approval of expenditures.
• Prepare financial reports including monthly, quarterly, yearly, and ad-hoc reports.
• Manage accounting and auditing issues, including liaising with internal and external auditors, ensuring compliance with statutory and university standards.

Job Requirements:

• A minimum of a Bachelor’s Degree in Accountancy/Accounting/Finance is required or a Master’s or PhD in Engineering is preferred.
• At least 3 years of relevant experience in research management, preferably within a research or academic setting. Experience in managing budgets, financial reporting, and procurement is an advantage.
• Proficiency in financial management systems (e.g., Ariba) and standard accounting software. Strong analytical skills.
• Must possess strong problem-solving skills to address and resolve accounting and auditing issues efficiently and effectively.
• Ability to function effectively in a dynamic environment and adapt to change while maintaining high performance standards.
• A good understanding of relevant laws, regulations, and standards governing financial practices in the academic and research sector.
• Excellent verbal and written communication skills are necessary to effectively liaise with various stakeholders, including senior management, auditors, and team members.

We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

• Inspects, maintains and repairs various types and brand of air conditioner system, including split units, window and casement units.

• Performs regular preventive maintenance and corrective works on air conditioning system.

• Diagnoses electrical and mechanical defects and malfunctions.

• Carries out repair works such as replacement of air con compressor, fan coil motors etc.

• Any other tasks, when required by the immediate supervisor.

• To carry out air conditioner maintenance, servicing and repair works

•Troubleshoot error code and malfunctions of air-conditioning system

•Ensure all works are carried out safely with safety procedures

Requirements:

• Minimum 10 years of Aircon engineering supervisory experience
• Education not much required, But Preferred overseas experience.
• Education is not necessary. Must practically Aircon experience.
• Must able to work as a Engineer
• Willing to work on rotating shifts,
• Able to do hardworking,
• Willing to work weekend and public holiday when required.

JOB DESCRIPTION

• Evaluating the supply and availability of stocks, and profit-margins.
• Implementing measures to avoid stock damages, theft, and wastage.
• Monitoring shelve stocks and product displays, and the general appearance of the store.

• Inspects, maintains and repairs various types and brand of air conditioner system, including split units, window and casement units.

• Performs regular preventive maintenance and corrective works on air conditioning system.

• Diagnoses electrical and mechanical defects and malfunctions.

• Carries out repair works such as replacement of air con compressor, fan coil motors etc.

• Any other tasks, when required by the immediate supervisor.

• To carry out air conditioner maintenance, servicing and repair works

•Troubleshoot error code and malfunctions of air-conditioning system

•Ensure all works are carried out safely with safety procedures

Requirements:

• Minimum 4 years of supervisory experience
• Education not much required, But Preferred overseas experience.
• Willing to work on rotating shifts,
• Able to do hardworking,
• Willing to work weekend and public holiday when required.

• In charge of material takeoff, cost & estimate of all civil engineering/electrical & mechanical/landscaping projects
• Involved in tender preparation and participation
• Responsible for progress payments claims & other contractual matters
• Preparation and co-ordination of all correspondences with relevant parties and authorities
• Other adhoc duties assigned from time to time

Requirements

• Polytechnic Diploma/Degree qualifications in Civil/ Structural Engineering/Mechanical & Electrical Engineering or related discipline
• 3 years of experience in roles as QS
• Proficient in MS office & contract administration
• Must be meticulous with positive work attitude
• Good interpersonal, analytical and negotiation skills
• Knowledge of autocad 2D & 3D skills would be an added advantage
• Independent and a good team player

Roles & Responsibilities

- To perform a variety of administrative and clerical tasks.

- Providing support to our managers and employees, assisting in daily office needs and managing our company’s general administrative activities.

- Able to work independently and confidence

- Willing to learn

Job Description

• Design engineering structure according to technical requirements as defined by contract, class rules and specific standard within quality, time and cost given.
• Prepare and provide design calculation / BOM / general arrangement / sectional drawings.
• Produce accurate assembly / detail drawings within an agreed time scale.
• Ensure drawing list are updated.
• Ensure production drawings and documents are completed and issued on time.
• Update and understand know-how on rules, class, authorities and etc.
• Prepare 3rd party approval submission documents.
• Investigate scope of re-work / modification brought forward by the Production.
• Able to use STAADPro is a must to perform design calculation.
• Perform engineering coordination / drafting (drawings) / checking as and when required.
• Any other duties as assigned.

Job Requirement

• Degree / Diploma in Engineering or equivalent.
• Minimum 5 years of relevant experience preferably in similar industry.
• Software knowledge in STAADPro is a must.
• Hands on AutoCAD and drafting knowledge.
• Organised, meticulous, team player with sense of responsibility.

** Require to work at site.

** Specialized in soil investigation/geotechnical field or equivalent.

** project planning, supervision & co-ordination for soil investigation work.

** prepare soil data and report and ensure quality of field work.

** prepare data and soil laboratory report.

** communication/co-ordination with client/consultants.

Career Highlights:

• Competitive compensation benefits
• Career growth opportunity
• Company’s transport available.

Job Description:

• Receive, organize and review tender specifications.
• Ensure clarifications and submissions are systematically maintained, as well as the safe custody of cost estimations.
• Co-ordinate and request quotations from Commercial Department, suppliers and contractors and update cost database.
• Prepare cost estimations and priced proposals in a timely fashion for submission to senior management for review of cost and formulation of pricing strategy.
• Update and analyze commercial data, commodity market indices, market cost data, unit rates and technical information on materials, services and labour, in order for Executive Management to make informed decisions.

Job Requirements:

• Degree / Diploma in Engineering or equivalents.
• At least 3 years of relevant work experience, preferably in shipyards or oil and gas industries.
• Proficient in Microsoft Excel is a must.
• Possess good initiatives to ensure that tender submission deadlines are met.
• Organised, positive attitude and detail oriented.
• Team Player, resourceful with sense of responsibility.