1. Lead a performing engineering team covering automation at site.
2. Achieve financial objectives through efficient utility operation, cost improvement actions and optimal cost options.
3. Planning & execution of PLC/HMI/SCADA qualification of all new and retrofit manufacturing equipment, packaging line related projects for the site.
4. Ensuring best available technologies are incorporated by design.
5. Techno commercial evaluations of consultants, vendors, and contractors.
6. Delivering the project within the budget and timeline approved.
7. Responsible for relevant project costing and annual budget preparation related to engineering, and manufacturing equipment.
8. Coordinating with statutory authorities for relevant approvals.
9. Complying with operational and personnel standards, regulatory and statutory requirements to ensure efficient, reliable, and uninterrupted operation.
10. Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.
11. Ensure the site manufacturing equipment are kept to the highest standards for cGMP, data integrity, audit trail requirements as per 21 CFR part 11, including Granulation, Compression, Packaging etc.
12. Responsible for spares management and drawings management.
13. Responsible for development SOPs and quality standard for site with following of site QMS procedures.
14. Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep site audit ready for all the time.
15. Responsible for managing a team of vendors / contractors.
16. To assist on any ah-hoc duties that been assigned / task by the immediate superior.

Roles & Responsibilities

· Install, maintain, and repair electrical systems and equipment while adhering to relevant codes and regulations.

· Conduct troubleshooting and diagnostic tests to pinpoint electrical issues and apply suitable remedies.

· Inspect electrical components like transformers and circuit breakers to verify functionality and safety.

· Reading and interpreting electrical circuit blueprints, diagrams, and schematics.

· Advising management on continued use of unsuitable equipment, appliances, and apparatus.

· Test electrical systems and circuits for continuity using specialized equipment such as ohmmeters and voltmeters.

· Collaborate with peers to identify enhancements in electrical systems and processes, ensuring adherence to safety protocols and accurate record-keeping.

· Excellent problem-solving skills.

· Good communication skills.

· Work independently without any supervision.

· Experience operating hand and power tools, soldering and fault-testing equipment.

Requirements:

· Nitec/Higher Nitec/Diploma/ Degree in Electrical/ Electronic Engineering or equivalent.

· Entry levels are welcomed as training will be provided.

· Proficiency in CAD software for electrical design

Primary Role

Site Civil Engineer to ensuring that construction projects are completed safety, on time, and within budget.

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors

Responsible for supervising and assessing the set-up of all project components, manage all aspects of an engineering project, prepare schedules, communicate with clients, project progress.

Key Activities

1. Coordinate with project team i.e. architects, surveyors, construction manager, safety and subcontractors to ensure that all project are integrated and executed efficiently
2. Oversee day-to-day operations on the construction site, ensuring that work is progressing according to the paln and schedule
3. Supervise construction workers and subcontractors, ensuring adherence to safety protocols, quality standards, and project specifications.
4. Conduct regular site inspections to monitor work progress, quality, and adherence to safety regulations.
5. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
6. Work independently and to coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
7. Design, communicate and implement an operational plan, Create and maintain cost estimates for projects and programs
8. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
9. Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
10. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
11. Set priorities, allocate tasks, and to meet projects targets and milestones, ensure smooth authority submission.
12. Solve technical issue such as drawing discrepancy, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary;
13. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications;
14. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws;
15. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress;
16. Overseeing quality control and assist safety department to achieve health and safety target on site;
17. Preparing method statement, daily weekly and monthly report;
18. Ensuring all site inspection and record as per client/developer requirement
19. Ensuring all testing and quantity inspection are carried out as per contract requirement.
20. Maintain accurate and detailed records of site activities, including daily logs, progress reports, and change orders
21. Ensure that all project documentation is up-to-date, properly filed, and accessible for reference and auditing purposes.
22. Monitor and control resource usage to prevent wastage and optimize efficiency.

Requirements

Min 2 years experiences in Civil, infrastructure projects

Bachelor degree in Civil engineering, PE board recognized

Job Description:

• Support the Business Account Management team to drive revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: create sales proposals and quotation preparation, with estimates ensuring accuracy, and lead time delivery conditions to meet customers’ expectations.
• Knowledge of project management activities including project planning, scheduling requirements and coordination with technical and production teams to meet customers’ requirements.
• After Sales support and working with the technical team for servicing customers’ requirements including post sales warranty support activities.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, reports, managing calendars, and coordinating meetings and appointments.

Education & Skills Requirements:

• Degree in Electrical, Mechanical, Mechatronics, Marine Engineering or relevant fields is accepted.
• Experience: Have experience as Sales or Marketing Executive in Electrical or Mechanical based company or shipyard for at least 5 years. Project Management Experience is crucial.
• Industry Technical Knowledge: Understanding of the marine or similar industry including knowledge of similar products, services, market trends, and customer needs is useful.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.

Role & Responsibilites

• Receives guidance only on new assignment / objectives and special / complex features.
• Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.
• Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.
• Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.
• This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.
• Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.
• This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.
• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement
• Prepare & Review of company development work methodology / procedures.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Attend FAT and SAT depending on project requirements.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

• Analyze SPC parameters and control charts.
• Implement measures to enhance tool capability performance.
• Examine quality issues and conduct initial troubleshooting.

Requirements:

• Diploma in engineering or equivalent.
• At least 2 years of relevant working experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Roles & Responsibilities

Responsibilities:

• Delegating and directing service tasks, monitoring the progress of current projects, and managing service team members to ensure the team's objectives and sales goals are met.
• Setting up and maintaining a service desk and evaluating its efficiency.
• Monitoring department issues and client complaints to create methods to lessen recurring issues.
• Proactive appointment planning for service visits.
• Helping to train new employees in company procedures and products.
• Establishing and maintaining good relationship with customers.
• Close cooperation with sales colleagues to create extremely good customer experience beyond customers’ expectatin the Successful Applicant.
• Bachelor or Engineer degree in mechanical/electronical engineering, or adjacent field.
• 5 or above years experience in construction cranes services industry.
• High level technical and analytical skills, problem solving mindset.
• Open-minded personality, Strong communicator.
• Willingness for regular travel and occasional overtime working.
• Base Salary plus Additional Bonus (Year-end Performance Bonus plus service bonus).

WE NEED A SUPERVISORE WITH TILEING WORK CERTIFICATION. WORKER MUST HAVE 2 YRARS OF EXPRIANCE OF TILES WORK

Primary objective:

• To undertake Process engineering design work in with true regard to Safety both in design detail and engineering design execution
• To carry out design work in compliance with the national, state and client asset Codes & Standards under direction from the Lead Process Engineer
• To engineer all design work in line with the Process QA manual and Worley’s procedures.
• To be innovative in design work with due regard to minimisation of cost whilst maintaining technical integrity
• To undertake all work within the estimated man hour budget and within schedule
• To assist in the recruitment and development of Process & Graduate Process engineers.
• To keep all Process documentation in a state of readiness for Audit purposes.

Specific Accountabilities:

• To provide definition of the Process engineering work in the Project, design approach or criteria by skill and experience as directed by the Lead Process Engineer
• To clearly understand the Codes and Standards applicable to the work carried out and raise deviations where necessary
• Prior to commencement of any Process work , a Process scope of work (SoW) must be written and agreed with the Lead Process Engineer (or designated representative). The Process SoW must clearly state the workscope, manhour budget and schedule to complete the work.
• Estimate Process manhours for any job using the current TW Process manhour norms
• Responsible for maintaining work progress (budget, schedule) and raising change documentation where necessary.
• Supervision of technical detail, budget and schedule of Process design in Project work where requested by the Lead Process Engineer
• Liaison with client, vendors and outside parties in a professional manner
• Where requested to undertake Process focal point duties
• To plan manhour budgets and schedules for all Projects within the focal point area of responsibility.
• To manage all resources allocated to the focal point area of responsibility (both technically and by discipline specific project controls)
• To liaise with the equivalent client focal point on technical and engineering matters on a regular basis
• Quality Assurance – Responsible for working within the provisions and guidelines of the Quality Assurance system relevant to the Project.
• Safety – Responsible for personal safety safe working practices for the Project. Understand and follow OH&S procedures.

Qualifications

• Bachelor of Engineering (Chemical Engineering) or equivalent
• More than 15 years process engineering experience in design/operations support related to the oil & gas production and processing industries, with at least 4 years in conceptual, FEED and detailed design in the Oil & Gas Industry.
• Computer skills particularly of process simulation packages such as HYSYS and PRO/11 and in commercial software including databases, spreadsheets and word processing packages
• Experience in the development of process flow diagrams, heat and mass balances and piping and instrument diagrams, and in sizing and specification of equipment including separators, pumps, compressors, heat exchangers and dehydration and sweetening units
• A good working knowledge of the codes and standards relating to the oil and gas industry particularly the API recommended practices and ASME/ANSI pipe and pressure vessel codes.
• Good report writing skills.

Position Overview:

We are seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Key Responsibilities:

1) Electrical Design:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration:

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement:

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting:

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety:

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Job Requirements:

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

About the role

• Responsible for Refinery/ Chemicals facility Mechanical design of greenfield/revamped/retrofit from conceptual stage to detail engineering phase of Medium and large projects.
• Ensure all documentation within the scope of their responsibility is prepared, checked (as assigned) in accordance with the Worley Management system for that project.
• Ensure all vendors bids and documentation are reviewed for technical acceptance.
• On case by case basis, to Lead a small team of Mechanical Engineers & designers from Home office and Support office

Responsibilities will include:

• Provide necessary technical assistance to other design groups assigned to project attached
• Communicate and interface with client representatives, other discipline Engineers and HVEC office
• Provide support to inspection activities for equipment or as necessary
• Actively look for value plus items that could be recorded and encourage other team members to do the same

About You

• Minimum of 10 years hands on experience for Basic and Detail Engineering jobs for Chemical/Petrochemical /Refinery/LNG Industries for all types of Static Equipment such as Columns, Pressure vessels, all types of Heat Exchangers, Fired Heaters, API storage Tanks etc.
• Bachelor's Degree in Mechanical Engineering
• Core experience related to Refinery, Petro-chemical, Chemical and LNG Static Equipment; Familiar with the Client guidelines/Standards of major petrochemical/refinery companies.
• Excellent knowledge and hands on experience with international Codes & Standards like ASME, TEMA, API, AD2000, PD5500 etc. including excellent Code interpretation skill.
• Drive Safe and Sustainable Engineering with value improvement practices. Pro-actively pursue with commitment for personal well-being and for continuously improving health, safety and Environmental performance of the personnel working with you.
• Shall be hands-on with Mechanical Engineering software, ability to work with Data centric Engineering data bases like AVEVA Engg., quest to continuously improve IT skills. Competent in Microsoft Office applications.
• Excellent inter-personal skills including soft skills, guide less experienced Engineers on Technical matters.
• Working experience with exotic materials, manage multi office execution, site support experience etc.

Role & Responsibilites

• Receives guidance only on new assignment / objectives and special / complex features.
• Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.
• Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.
• Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.
• This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.
• Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.
• This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.
• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement
• Prepare & Review of company development work methodology / procedures.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Attend FAT and SAT depending on project requirements.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

• Report to Construction Manager and lead the team/site works during his absence.
• Prepare & review detailed schedule for the site team to follow accordingly and for on-time completion
• Prepare & review detailed method statements and work instructions.
• Coordinate all related construction matters with subcontractor/consultant/client.
• Prepare & review company reports and documents
• Responsible & resolve technical and claim issues
• Assess subcontractors’ work activities against performance expectation
• Ensure compliance with quality, environment, health & safety requirements.

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 6 years of relevant experience, inclusive of at least 3 years as Deputy Construction manager level, managing construction teams for complex vehicular structures and road projects of similar scale and complexity
• Candidate with LTA viaduct experience is preferred
• Well experienced in Bored piling, CBP, ERSS, RCBC Drain Box, Grouting, etc.
• Knowledgeable with various Utilities, M&E works
• Proficient in MS Office and knowledge on AutoCAD is at an advantage
• Attained trade certificate such as CSCPM/BCSS/Confined Space/Work at height
• Good interpersonal skills
• Self-motivated, independent individual and possesses great initiatives
• A team leader
• Location : Woodlands
• Project : Viaduct

• Electrical site engineers direct and oversee electrical engineering projects at construction sites, resolving issues and ensuring that work is completed according to specifications. They balance project management and engineering tasks ranging from designing electrical plans to monitoring contractors. Electrical site engineers also ensure that plans and work are completed according to local and national electrical codes. Additionally, electrical site engineers conduct testing and maintenance on electrical systems, including final inspections prior to job completion.
• Conducts tests on electrical equipment and systems, performing duties as described.
• Diagnoses cause of electrical or mechanical malfunction or failure of operational equipment and perform preventative and corrective maintenance.

Roles & Responsibilities

Job Description

Overall Job Purpose

• The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.
• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• At times may act as a responsible commissioning engineer (owner) for few major systems in the area
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Studies the complex Company’s standards, business, operations and practices as well as engineering work matters/systems/procedures/standards within the tight project schedule in order to develop commissioning deliverables.
• Applies effective communication in discussions with various disciplines and departments in order to clarify complex information which is required as input for commissioning deliverables.
• Is expected to work independently and lead electrical commissioning team in order to complete the work schedule and fulfill the project timelines.

Requirements

• Bachelor in Engineering (Electrical)
• 7 years and above of relevant working experience in FPSO commissioning.
• Analytical skills
• Taking ownership
• Communication skills (written & verbal)
• Teamwork
• Professionalism
• Awareness about business process

Our client is a Engineering Construction industry. Due to business needs, they are now recruiting a HR Manager to be part of their team for ongoing transformation projects. They are located in the North.

Duties:

• Lead and manage HR functions, including recruitment, talent management, compliance, and policy development. Ensure alignment with company goals and legal standards.
• Work with stakeholders to plan and implement workforce strategies. Advise on resource planning, organizational structure, and change management.
• Develop and execute recruitment strategies. Source, assess, and recommend candidates. Ensure fair and unbiased selection practices. Enhance onboarding processes.
• Define learning needs and career development paths. Guide performance management processes. Identify and groom talent for leadership roles.
• Advise on compensation strategies and benefits. Support employee engagement activities. Manage labour relations to achieve harmony and performance goals.
• Collaborate with department heads on hiring needs. Provide guidance and support to line managers on HR practices and policies

Requirements:

• Degree in Human Resources, Business Administration, or any equivalent
• Min 5 to 8 years of HR experience
• Knowledgeable in APAC HR best practices and Singaporean legislation.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Responsibilities:

Assist the Assistant Vice President in the development of comprehensive operations and maintenance manuals. You will be primarily responsible for gathering, consolidating, and documenting all relevant technical information needed to ensure efficient plant operations and maintenance. This includes the collation and integration of OEM (Original Equipment Manufacturer) manuals, drawings, logic diagrams, and other critical documents.

You will work with various teams, contractors and sub-contractors to gather and systematically sort and arrange all the relevant documents in the format required.

Key roles include:

• Document Development: Compile, write, and organize operations and maintenance manuals. Ensure that all information is clear, concise, and easily accessible in the format required.
• Information Gathering: Collaborate with engineers, technicians, and other subject matter experts to collect necessary technical data, including OEM manuals, schematic drawings, and engineering logic diagrams.
• Document Review and Updates: Regularly review existing manuals and process documentation to identify areas for improvement or updates due to equipment or procedural changes.
• Standardization: Develop and maintain a standardized documentation process to ensure consistency and accuracy across all technical documents.
• Quality Assurance: Perform thorough quality checks to ensure technical veracity and compliance with industry standards and regulatory requirements.
• Training Material Development: Assist in creating training materials based on the operations and maintenance manuals for internal use

Requirements:

• Degree in Engineering, Technical writing or related technical fields
• At least 5 years’ experience in technical writing
• Experience in refining, power generation or water plant systems and operating environment
• 2 years project with annual benefits and completion bonus
• Company transport to & fro Jurong Island

Interested candidates, please send in your updated resume to [email protected]

Attend complete orientation, introduction of superior,clear scope of work for next working day on First day of work on site.

Ensure the records of inspection details are maintained in a Register

Attend Daily Toolbox Meetings.

To conduct inspection within seven (7) days immediately following the last inspection done

To be fully committed, Lead the teams and complete the task with quality in a timely manner.

To perform housekeeping, once the work area is cleared, before move to the next work location

• Corresponded to handle Accounts Payables & Accounts Receivables

• Facilitated to receive and verify invoices and requisitions for goods and services.

• Performed reconciliation for suppliers' statement

• Formulated to verify that the transactions comply with the financial Policies and procedures

• Prepared bank reconciliation statement, monthly trial balance and profit & loss account

• Corresponded with preparation of monthly management reports tracking financial performance against budget

• Facilitated with providing commentary on management reports

• Formulated with preparation of cashflow forecasts

• Recommended with Variance Analysis around actual results compared to the budget and forecasts for each profit and cost centre

• Play a lead role in compiling the annual budget with senior management

• Analysed trends and financial performance across business units

• Persuaded with month end accounting including reconciliations and journals

• Supervised and trained junior staff

• Coordinated with taking part in systems and process improvement initiatives.

• Position: Inventory Executive
• Company Industry: Engineering & Construction
• Employment Type: Full-time
• Working Hours: 5 Days (Monday to Friday), 8:00 a.m. to 5:45 p.m.
• Working Location: Kaki Bukit, Singapore
• Salary Package: Monthly Basic Salary: Up to $3,300 per month

Key Responsibilities:

• Oversee warehouse operations, ensuring compliance with SOPs and safety protocols.
• Manage accuracy of Goods Receipt (GR) and Goods Issue (GI) records using SAP, C4C, and RFID.
• Coordinate daily operations with internal and external users, optimizing warehouse efficiency.
• Handle import/export activities to minimize storage time and reduce costs.
• Conduct monthly inventory reporting for in-house and third-party warehouses.
• Organize and supervise annual and sample stock takes.

Job Requirements:

• Minimum 3 years of warehouse inventory management experience.
• Proficient in Microsoft Office applications and SAP.
• Forklift License preferred; ability to handle heavy materials required.
• Diploma in Logistics, Supply Chain Management, or related field.

Recruit Lync Pte Ltd | EA License Number: 22C1000

Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Employee must understand drawing

can handle job.

work hour monday to saturday 8 am to 7 pm.

supervise job site.

Responsibilities

· Review and verify the subcontractor & supplier claim and prepare payment certification.

. Prepare progress Claim and liaise with the Client's representative on claims and variation costs.

. Leading a team of 3 quantity surveyor to achieve project goals and objectives.

· Request quotation from supplier

· Assist project team to prepare submission document, shop drawing, as built drawing / Operation Maintenance Manual.

· Online tender submission.

· Other ad-hoc duties as assigned

Requirements

· NITEC / Higher NITEC / Diploma/ Degree in Quantity Surveying /Mechanical Engineering or related discipline

· At least 8 to 12 year of relevant working experience in building construction industry / ACMV services / M&E would be an added advantage

· Ability to prioritize, plan, organize and execute tasks effectively

· Computer skills in AutoCAD/ 3D & Microsoft Office

· Able to work independently with minimum supervision

· Good interpersonal and communication skills

CNC Programmer (Precision Engineering)

• Working Days: Monday-Thursday
• Working Hours: 7.30am - 7.30pm // 7.30pm - 7.30am [Rotated shift]
• Location: Woodlands
• Salary: $5000 - $5500 + VB

Requirements:

• Diploma, or 3-5 years Nitec in Precision, mechanical engineering or it's equivalent.
• Demonstrated knowledge and understanding of machine code (G&M code)
• Demonstrated knowledge of GD&T Demonstrated
• Familiarity with Fanuc, Heidenhain and Tsugami controllers.
• Experience programming 3-axis and 5-axis CNC mills.
• Familiarity with Hyper Mill and Solid Work.

Job Scope:

• Develop new CNC programs for production runs or modify existing programs for different machines and make manual program adjustments as necessary.
• Analyze drawings to determine dimensions and to choose cutting tools, machine speeds, and feed rates.
• Identify and apply appropriate tooling based on material types, equipment considerations, cutting conditions, etc .
• Design work holding/fixturing, as needed, with assistance from process engineering.
• Troubleshoot issues during the manufacturing process.
• Guiding and providing operator/machinist with basic instruction in operating the machines.
• Perform quality checks with the machine operator to ensure the program is producing parts according to specifications.
• Support RFQ quotation fabrication process as and when need arise.
• To perform other similar or related duties as directed by superior from time to time.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description & Requirements

Job Description & Requirements

Must be digree holder & WSHC certificate.

Able to handle project. and submit quotation for tender.

able to communication ministry of manpower (MOM) and Building and construction authority (BCA) Officer.

must have Bizsafe level 1 and level 2 certificate.

driving license 2A & class 3 and class 4

minium 7/8 yeras experince in singapore

microsoft office skill.

must understand drawing

able to handle job

work hour monday to saturday

8.00 am to 7.00 pm

job site supervise