To assist the O&M Manager in supervising a team of Assistant Engineers (AE) and Technical Officers (TO) to respond, investigate, and perform Preventive Maintenance (PM) and Corrective Maintenance (CM) to the monorail system in compliance with the relevant standard procedures and work instructions.

Duties and Responsibilities

• Lead the team of AEs and TOs in performing PM and CM tasks in compliance with the relevant Standard Operating Procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions, and any relevant change instructions disseminated.
• Supervises and ensures that PM and CM works are executed in accordance with the established standard procedures / requirements.
• Responsible for the safety of self, and peers at the workplace; off and on trackside throughout the working period.
• Prepares ATW/PTW for Sentosa Monorail systems equipment PM or CM works for Sentosa Development Corporation's (SDC) approval.
• Ensures plan scheduled PM and CM are performed timely.
• Carries out monitoring, review, and follow-up where appropriate on Monorail systems and equipment performance under his charge.
• Manages and controls maintenance spares.
• Plans the yearly and monthly maintenance schedule for all trains, and depot equipment as well as the night work schedule to meet SDC contract requirements.
• Coordinates with SDC pertaining to the schedule of PM, CM works, equipment tests, and other ad-hoc jobs.
• Liaise/coordinates with subcontractors in the servicing and the MOM certification of depot equipment and ensures that works are completed on time and meet SDC's requirement.
• Prepares minutes of meetings and attends progress meetings with SDC.
• Prepares SMM monthly maintenance report.
• Performs SMM administration works including planning of duty roster, approval of OT, leave, petty cash submission, staff coverage, etc.
• Draft all relevant documents like work instructions, work records, etc.
• Certification of staff (AE/TO) after staff have satisfied all the necessary training requirements.
• Raise PRs and evaluation of the RFQ submission.
• Manage and execute Variation Orders (VOs).
• May be required to report for work after office hours on ad-hoc basis, mainly for night trainings or covering of duties for the AEs when they are on Annual/Medical Leave.
• Perform tasks assigned by the supervisor as and when required.
• Working location at Sentosa.

Qualifications and Work Experience

• Recognized Degree or equivalent in Electrical, Electronic, Mechanical, or Mechatronic Engineering, with at least two (2) years of relevant working experience in railway maintenance/ workshop, or
• Recognized Diploma or equivalent in Electrical, Electronic, Mechanical, or Mechatronic Engineering, with at least five (5) years of relevant working experience in railway maintenance/ workshop.

Skills and Competencies

• Good analytical, decision-making, and problem-solving skills.
• Good understanding of Engineering systems and design.
• Good understanding of production assembly setup and process.
• Good in preparing monthly reports / technical design knowledge.

Responsibilities

Provide Leadership to the Electrical engineering team to comply with project requirements and to meet project schedules.
Lead and prepare overall concept.
Lead, prepare, & review Request for Quotations (RFQs) and specifications. Lead EPC tender as the lead for Electrical.
Review technical proposals from OEMs to ensure compliance to our design requirement.
Plan & Manage the Electrical Master document List.
Plan & Manage manpower loading.
Review cable routing, BOQ, lead engineers and drafters.

Lead the engineering design of the following activities:
Design of 230kV, 66kV, 6.6kV & LV power supply system including; Sizing of Power Generation System, transformer, UPS & DC systems.
Articulate the overall Single Line
Understand & explain Power system Analysis by ETAP
Understand & explain Protection coordination
Calculate Cable Size
Understand & explain HV, MV and LV distribution & motor starter system
Understand & explain UPS & DC system
Understand & explain Solar generation system
Understand & explain Power Management System
Plan & coordinate Electrical Room layout
Understand, explain, plan & coordinate Cable and Busduct Management System

Familiar to the following Equipment and System;
Steam/Gas turbine generator
EDG (Emergency diesel generator)
GCB/TCB/UCB
GSUT/UAT/AT
MV/LV VSDs
IPBD/SBPD/LV Busduct
HV/MV/LV Switchgear and MCC
Civil interface for switchboard installation, pull pit and penetration.

Requirements

At least 10 years of relevant experience as Leader or Senior Electrical Engineer in EPC project for Power, Petrochemical and/or Waste-to-Energy plants
Bachelor’s degree in electrical engineering or equivalent
Strong background in EPC projects Strong leadership & people management
Familiar with industrial standard, e.g, ISO, IEEE, and etc. and Singapore standard, e.g SS638
Familiar with statutory Regulation or Code, like Singapore transmission code. etc.
Able to work in collaboration with various disciplines
Able to interface seamlessly with engineering, construction, and operations contractors

Able to work on-site in construction environment

Work location: Tuas Nexus

Job Description:-

• Identifying, collecting and recording soil samples and data from site borehole.
• To resolve all technical and non-technical issues.
• Assists Project Engineer/ Manager in planning programme of sequence of works.
• Review the field work/ site investigations proposed by the Consultant and make recommendations wherever required.
• Review and prepare geological reports as per requirement for different projects.
• To monitor site work, materials, plant & equipment.
• Support PD to analyze the claims, variations, extension of time etc.
• Support PD to check & verify the Contractor’s payment statements.
• Review the project interface in the implementation schedule submitted by the Consultant and suggest appropriate measures for correction.
• Assist PM for progress report preparation.
• Perform any other duties as assigned by the Company.

Requirements:-

• Degree in Geology / Civil & Structural / Geotechnical Engineering
• Soil Investigation, Instrumentation & Monitoring, Geotechnical experience, fresh graduate are welcome to apply.
• Possess class 3 driving licence is an added

Job Scope

administration: Data Entry

• Accurately inputting information into a database or spreadsheet.
• Ensuring data accuracy and consistency.
• Assist HR, purchase, account department in administrative duties
• Any other job given
• Proficient in MS Office (Word, Outlook, and Excel)

Working Schedule

• 5 days work week
• 10 pm - 6pm

Responsibility & Scope of works:

• Manage, supervise and co-ordinate small projects, electrical installation turn-on inspection & licensing inspection undertaken by the Company and works assigned to you by the Project Manager.
• Participate in company tender exercise and quotation.
• Assist in price negotiation, drawings preparation and related activities.
• Ensure timely requisition of resources such as labour, materials, equipment for the small project works - power upgrading, tenancy renovation works, A&A works, etc.
• To issue site purchase order - purchasing material for electrical installation works.
• Inspection & Testing of the electrical safety of electrical installation in commercial and retail, healthcare, industrial building in compliance with Code of Practices.

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree in Electrical/Power/Electronics Engineering
• Good communication skills, team player, independent, strong leadership and self-motivated
• Knowledge in Electrical Installation (EI)
• At least 2-3 years working experience in the related field.
• Full-time position

Roles and Responsibilities

· Provide administrative support to office and team as required in a timely, proactive and diligent manner.

· Coordinate office activities and operations to secure efficiency and compliance with company processes and procedures.

· Assist with data entry, managing and handling documents and records.

· Preparation of tax invoices and other documents.

· Support on-boarding and off-boarding processes.

· Carry out administrative duties (liaising with customers and suppliers).

· Assist in preparation and processing of purchase orders.

· Ensure all purchasing quotation, requisition form, delivery order and other documentations are properly recorded and filed.

· Ad-hoc tasks as assigned by superior from time to time.

Requirements

· Proficient in English.

· Excellent knowledge of MS Office and office management software.

· Qualifications in secretarial and basic accounting is welcome.

· 1 - 2 years of experience in administrative role.

· Commitment to quality in performing required tasks.

· Positive, hardworking and organised.

Job Description: -

• Manage and coordinate all Soil Investigation & Geotechnical instrumentation works.
• Oversee all day-to-day operations.
• Assist the Directors on Project Management and procurement.
• Oversee all Soil Investigation works, and Geotechnical Instrumentation works including preparation of Method Statement, Installation, Data Acquisition, Data verification, Data presentation & Reporting.
• Oversee projects as they are being carried out to make sure that the work is done according to outlined specifications, and that they also conform with project timetable.
• Help project managers and engineers in the arrangement and analysis of projects and scheduling of reports on projects.

Requirements: -

• Diploma in Engineering or its equivalent or higher.
• At least 5 years of geotechnical engineering experience projects of large scale in Singapore.
• In depth Knowledge on Procurement & sub-contractor management for instrumentation and related geotechnical works.
• Good and effective communication skills
• Possess good leadership ability, as well as ability to work as part of a team or even lead a team
• Good analytical and organizational abilities.
• The ability to multitask and strategize in different situations.
• Ability to work and carry out projects within a stipulated time frame or deadline.

Job Title: Sales Executive (Hunter Role)

Job Description:

Proactively identify, pursue, and secure new business opportunities in the chemical industry to expand the company's market share.

Build and maintain strong relationships with potential clients in the chemical sector.

Consistently achieve or exceed sales targets and KPIs as set by the company.

Drive lead generation through cold calling, networking, and industry-specific research to identify high-value prospects.

Deliver compelling presentations, proposals, and product/service demonstrations tailored to clients in the chemical industry.

Collaborate with internal teams to ensure smooth delivery of services to newly acquired clients.

Maintain a robust pipeline of prospects and regularly update the management team on sales progress and market opportunities.

Stay informed about market trends, competitor activities, and developments within the chemical industry.

Take responsibility for special projects aimed at driving growth in the chemical sector.

Requirements:

A Bachelor's Degree, Post Graduate Diploma, Professional Degree, or Master's Degree in Engineering (Chemical), Business Administration/Management, Maritime Studies, Marketing, Commerce, or a related field.

At least 1 year of working experience in sales or business development, preferably in the chemical industry or a related field.

Strong ability to independently generate leads and build a pipeline in a new market.

Excellent communication, persuasion, and negotiation skills tailored to the chemical industry.

Target-driven and passionate about new business acquisition in the chemical sector.

Applicants without prior sales experience in the chemical industry are encouraged to apply; training will be provided.

Full-time position available.

Job Description for BIM Co-Ordinator-Structural Steel

* BIM Construction Planning & Coordination for steel structure projects

*Update Project Model and capture all changes in Real time basis in preparation of As Built Model

*Prepare Erection method of statement for On-Going project submission.

*Support Tender Team create erection implementation programmed.

*Create shop drawing /GA drawing such as Plan, elevation, sections, connection detail and 3D View using AutoCAD and TEKLA Structure software.

*Generate fabrication drawing and report such as Marking plan, assembly drawing, Single part drawing, Assembly list, Assembly part list, Part list, Drawing list, Site bolt summary list, Bolt location list, NC files, etc.

*Reviews and study the Site accessibility and utilization plan.

*Evaluate erection and hoisting capacity of machineries like Tower crane, Mobile crane, Crawler crane, Strand jack, etc.

*Allocate Pre-design Temporary Tower scaffolding, access platform for consultant’s evaluation.

*Implement standard code of practice and project specifications for steel material, welding, surface treatment, etc.

*Raised RFI/RFA to clients for drawing clarification and material approval.

*Review model and proposes better engineering alternatives and connection details for the Temporary structures.

*Attend Client Tender MOS presentation and meeting.

Certificates & Work Experience Requirements

BIM- Revit Structures Essential & BIM 360

TEKLA Structure

3D Max

Sketch-Up

Navisworks

AutoCAD – 2D Detailing

Job Description

You will help to design and develop Guidance, Navigation and Control (GNC) systems and algorithms for our drone systems and be part of a tight-knit team that provides safe, reliable drone systems and quality services to our distinguished customers in Singapore and around the region.

Your responsibilities will include:
• Design, develop and modify guidance, navigation, and flight control systems and algorithms for our unmanned aircraft systems.
• Develop and modify 6-DOF and hardware-in-the-loop (HIL) simulation environments. • Select, test, evaluate and integrate new sensors or navigation systems onto our drone systems.
• Write, modify, and test firmware and flight code that runs on the flight control computers of our drone systems (in C or C++).
• Analyze flight data to verify flight performance and to help to troubleshoot issues that are found during the flights of our drone systems.
• Generate documentation on the specifications, design, test procedures and test results of the GNC systems and algorithms that were developed.
• Participate in design and code reviews.
• Support ground and flight test activities.
• Work in a collaborative manner with staff in other engineering (e.g. system, software, safety, flight test, etc.) and business groups.

Requirements

• Bachelor’s/ Master’s Degree in Mechanical, Electrical, Aerospace, Controls, Mechatronics Engineering, or a field related to GNC.
• Good to have 3+ years of industry or other relevant experience in GNC
• Strong background in system modelling, system identification, parameter estimation, frequency response analysis, classical and modern control theory.
• Experience in system modelling and control, analysis, and simulation in aircraft applications.

• Experience in developing model-based design and analyses using MATLAB/Simulink.
• Knowledge in inertial and other type of sensors for navigation (e.g. accelerometers, gyroscopes, magnetometers, GNSS receivers, pressure sensors, ranging sensors, etc.)
• Knowledge in Kalman filtering, digital signal processing and sensor data fusion.
• Proficient in C/C++ programming language.
• Proficient in software and development tools such as Linux, ROS and Git.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

I- Basic Function/General Scope of Work

The position is involved in project management for all aspects (contract, and technical, quality and project schedule etc) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to customer if any changes on the drawings.

2. Support Project manager to communicate with customer after installation team verifies all drawings prior to moving to construction phase.

3. Coordinates with installation team, customers and sub contractors during construction.

4. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Participate in final inspection and collection the data for as built drawings.

8. The position is accountable for strictly complying with CEEC’s Code of Ethics.

9. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Competencies

The incumbent should possess:-

1- a degree in Mechanical or Electrical Engineering is required/preferred.

2- a minimum 1 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in Process projects (Oil&Gas, water treatment, WTE etc) is preferred.

Additional Information

Career Level:Junior Executive

Qualification: Diploma or ITE

Years of Experience: 3 years

Job Type: Full-Time

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 10 Years of working experience in the related field is required for this position.

• Preferrable 10 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Responsibilities

• Lead, motivate, and support a large team within a time-sensitive and demanding environment, including career development plans for direct reports and problem resolution
• Manage data collection for the updating of metrics to achieve productivity targets, reduce cost per unit, eliminate errors, and deliver excellent customer service
• Partner with cross-functional teams to improve proprietary tools and systems
• Work closely with legal and safety departments to ensure that activities remain compliant
• Oversee materials and inventory
• Conduct budget reviews and report cost plans to upper management

Required skills and qualifications

• Two or more years of proven success in an operations management role
• Strong skills in budget development and oversight
• Excellent ability to delegate responsibilities while maintaining organizational control of branch operations and customer service
• Proficiency in conflict management and business negotiation processes
• Knowledge of business productivity software and an aptitude for learning new applications

Preferred skills and qualifications

• Bachelor’s degree (or equivalent) in operations management, business administration, or related field
• Working knowledge of management software programs, including NetSuite, QuickBooks, and CenterPoint Payroll
• Strong IT skills, including database development
• Multiple years of financial and account reporting experience
• Ability to communicate in more than one language

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job description

Overview of Position:

The Project Executiveis responsible for overseeing and managing high-level projects from inception to completion. This role involves strategic planning, resource management, and ensuring projects align with organizational goals.

Key Responsibilities:

• Lead project teams, providing direction and guidance throughout the project lifecycle.
• Develop comprehensive project plans, including scope, timelines, budgets, and resource allocation.
• Track project progress against milestones and deliverables, adjusting plans as necessary to ensure successful outcomes
• Ensure all project deliverables meet quality standards and align with organizational policies.
• Ability to manage multiple projects simultaneously and meet tight deadlines.

Requirements:

• Diploma in M&E / Diploma in Building Services Engineering
• 2-3 years of relevant experience

Job Types: Full-time, Permanent

• Day shift
• Monday to Friday

Work Location: In person

Job Description:

- Perform production assemblies and operate plant equipment in accordance to process sheets, approved procedures or operating work instructions

- Perform simple machine set-up

- Do in-process inspection in accordance to approved processes.

Job Requirements:

- Nitec in any engineering fields

Job Description:

• Set-up and operate automated/ manual assembly machine
  • Final and Components Assembly of Ammunition Product linking & Packing
  • Pressing (spitback assembly, cartridge case)
  • Labelling, packing & Palletizing.
• Handle/ Shift of parts/equipment involving the use of lifting equipment (lifting tables, pallet jacks, trolley, etc.)
• Meet daily production output
• Perform in-process inspection as per Process Sheet
• Keep record of production output and reject items
• Maintenance of the machines
• Perform daily housekeeping
• Adjust, repair or replace machine components
• General Ad-Hoc task assigned by the supervisor

Job Requirements:

• Excellent communication & interpersonal skills
• Team player and able to work under pressure
• Possess knowledge with automation machine for production.
• Must be able to do overtime and nightshift when required.
• Abe to comply with company policies, security regulation and EHS regulations

We are seeking a dedicated andknowledgeable Quality Assurance Engineerwith specialized experience in the oil & gasand semiconductor industries. The idealcandidate will play a crucial role inensuring the quality, reliability, and compliance of our products and processesthrough rigorous testing and ISO audits.

Job Description：

• Develop and implementcomprehensive quality assuranceplans, procedures, and metricstailored for oil & gas andsemiconductor products.Conduct thorough quality inspections,audits, and evaluations to ensureadherence to industry standards andregulatory requirements, includingISO standards.
• Perform root cause analysis and leadcorrective and preventive actions(CAPA) to address quality issues andimprove processes.
• Collaborate closely with engineering,manufacturing, and supply chainteams to implement qualityimprovements and resolve quality-related issues.
• Maintain accurate documentation andrecords of quality tests, inspections,and audits.
• Drive continuous improvementinitiatives in quality assuranceprocesses and methodologies.
• Stay abreast of industry trends,technological advancements, andregulatory changes in the oil & gasand semiconductor sectors.

Requirements:

• Bachelor’s degree or Diploma in Engineering,Quality Assurance, or a related field.
• Proven experience in qualityassurance roles within the oil & gas and semiconductor industries.
• Strong knowledge of ISO standards(e.g., ISO 9001, ISO 14001, ISO 45001)and experience with conducting ISOaudits.
• Proficiency in quality managementtools and methodologies, such as SixSigma, Lean Manufacturing, or TotalQuality Management (TQM).
• Experience in performing quality inspections, audits, and evaluations incompliance with industry regulations.
• Familiarity with automated testingtools and software used in qualityassurance processes.
• Excellent analytical and problem-solving skills, with attention to detailand accuracy.
• Strong communication, interpersonal,and collaboration skills.
• Ability to work effectively in a dynamicand fast-paced environment,managing multiple priorities

Roles & Responsibilities

Responsibilities:

• Carry out examinations, maintenance, and servicing on diverse material handling machinery at client locations.
• Troubleshoot, diagnose, and repair a variety of technical equipment.
• Install, configure, and test new equipment.
• Perform customer assessments following task completion, document observations, and suggest safety-oriented corrective measures.
• Compile and promptly submit accurate service documentation.
• Ensure the safe operation and maintenance of company assets and vehicles.
• Comply with safety protocols and promptly report identified hazards.
• Execute PM scheduling and Preventive and Corrective Maintenance work activities.
• Evaluate continuous improvement for preventive maintenance programs
• Attend troubleshooting of system abnormalities and assist or lead system recovery.
• Supervise out-sourced contract service provider to performance work activities in accordance to defined scope of work and system requirement.
• Maintain equipment and system maintenance record for work history traceability.
• Track and monitor equipment spare parts and consumable inventory.
• Site supervision for installation of new capital equipment and/or system expansion project at critical milestone during construction phase
• Provides support for start up testing and commissioning of new equipment and system.
• Enforce to company’s environmental safety health policy and procedure, standard operating procedure with risk assessment, good housekeeping standard and quality policy when performing work.
• Troubleshoot & repair electrical works to ensure functionality, including but not limited to air-conditioning, refrigeration and plumbing.
• Perform preventive and corrective maintenance work.
• Diagnosing potential maintenance issues and highlighting to the reporting manager proactively.
• Liaise internally and externally with contractors, service providers and statutory authorities when necessary.
• Respond to emergency calls on critical services and be on standby during off-duty hours, including going onsite for emergency matters.
• Perform any other ad-hoc duties as assigned by the reporting manage

Requirements

• At least 3 years of relevant experience in the similar industry
• Proficient in MS Office applications
• With technical knowledge of material handling, construction or related.
• Strong knowledge and understanding of mechanical and electrical principles.
• Excellent analytical and problem-solving skills.
• Good communication skills.
• Ability to work independently and as part of a team.
• Able to perform shift work

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 12 Years of working experience in the related field is required for this position.

• Preferrable 12 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Key Responsibilities:

General Administrative Duties

· Carry out daily administrative tasks to ensure efficient office operations.

Data Management

· Accurately input and update information in company databases and filing systems.

· Organize, store, and retrieve documents systematically to ensure easy access for the team.

· Maintain data integrity by regularly reviewing and updating records.

Administrative Support to Teams

· Assist various departments with administrative tasks, including preparing documents, reports, and presentations.

· Handle mail administration, including sorting, distributing incoming mail, and managing outgoing correspondence.

· Provide support for data entry and information compilation as requested by team members.

Ad-hoc Duties

· Perform additional tasks and support projects assigned by management to contribute to the overall efficiency of the office.

Qualifications and Skills:

· Education: Minimum GCE ‘O’ Level or equivalent; a diploma in administration or related field is an advantage.

· Experience: 1–2 years of experience in an administrative role is preferred but not required.

· Technical Skills: Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint) and familiarity with data management systems.

· Communication Skills: Good verbal and written communication skills to facilitate effective team support.

· Organizational Skills: Ability to multitask, prioritize, and maintain an orderly and efficient workspace.

· Work Environment: office-based role, working 5 days a week.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 15 Years of working experience in the related field is required for this position.

• Preferrable 15 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.