Resposibilities

• Operate mechanical excavators efficiently and safely in accordance with site requirements.
• Conduct daily safety inspections, including cleaning and lubricating equipment as needed.
• Follow instructions from the Site Supervisor / Foreman to complete assigned tasks.
• Maintain a safe working environment by observing and reporting any unsafe site conditions.

Requirements

• Minimum 5 years of experience as a registered Excavator Operator.
• Possession of a valid Excavator Operator license.
• Proven experience with SP PowerGrid projects.
• Willingness to work overtime when required.

Job Requirements:

• At least 10 years experience

• Willing to work on holidays / work on shifts / change of shift

• Able to stand/work for long hours

• Can work between different locations

• Have relavant certificates

• Carry out repair and routine maintenance duties on equipment, building facilities and offices, building systems, grounds, and structures
• Coordinate efforts with company’s contracted HVAC vendors to ensure company HVAC systems are functioning perfectly
• Perform inspection, maintenance, repairs, and installation of air conditioning systems, including D.D.C. building control and pneumatic systems, cooling systems, refrigerators, ice machine, refrigerated water coolers, and similar equipment
• Carry out maintenance checks on heating, ventilation, and air conditioning systems; clean evaporator drain pans, coils, and filters; lubricate fan and motor bearings; repair and change motors, electrical wiring, belts, compressors, thermostats, fans, floating elements, and defrost timers
• Place airflow controls to occupants’ preference by adjusting dampers, splitter, diffusers, and fans speeds; take away, clean, and change filters and strainer; remake, repair, and paint metal and wood cooling fans and towers; add the right amount of chemicals to water towers to prevent corrosion and rust
• Run equipment, observe its operation, and read instruments and gauges, including Volt-ohm meters; find out temperature gauges and adjust mechanisms, including valves, pumps and controls to direct levels of fluid, temperature, and pressure; charge with specified types and amount of refrigerant, and bleed contaminants from systems; inspect gauges and carry out periodic preventive maintenance checks
• Carry out overhauling and servicing of refrigeration units by repairing, changing, or reworking broken parts of compressors, condensers, and vacuum pumps; inspect Freon level in refrigeration units and fix any leak observed, and charge units as required; clean and change filters on ice machines and similar equipment; inspect heating elements and change if bad
• Perform repairs or adjustments on piping connections, valves, couplings and fittings by riveting, bolting, welding, brazing, and soldering applying hand tools, drill press, prestolite torch, and acetylene torch
• Take away pumps and motors, change bearings and shafts, repacks and perform reinstallations; perform adjustment on expansion valves; change, fix, and re-calibrate humidistats and thermostats, change hinges, gaskets, and hardware
• Provide assistance to supervisor in planning new installation and modification projects, preparation of specification, and major reconditioning and overhauling projects, applying knowledge of refrigerating systems, engineering specifications, and blueprints
• Order for replacement of equipment parts as required, perform repairs as ordered, and keep record of servicing on equipment
• Provide assistance to colleagues in the department to effectively maintain, and repair equipment, buildings, and municipal properties
• Carry out minor electrical maintenance work, such as repair or replacement of fixtures, including wall switches and outlets, ballast, incandescent and fluorescent tubes and bulbs, fuses, sockets, etc., by applying the right tools
• Carry out minor plumbing maintenance work, including change or repair of leaks in faucets and drains, trenching and laying of new lines, unclogging of drains, etc.
• Carry out minor masonry, painting, and carpentry work
• Carry out restructuring, installation, positioning, and re-mounting of modular offices and space, including furniture, work surfaces, wall panels, lighting, file cabinets, storage bins, etc. to maximize office space and meet user needs
• Provide support after work hour if required in situations like emergency, workshop, commission meetings, and other company functions
• Perform related duties that may be assigned.

Electrical engineers design, develop, test, and oversee the manufacturing of electrical equipment and systems. They also manage projects, ensure safety standards are met, and collaborate with other engineers and technicians. Some of their responsibilities include:

• Designing systemsElectrical engineers design electrical systems for a variety of applications, including automobiles, aircraft, and power generation equipment. They also design and draft construction drawings.
• Managing projectsElectrical engineers manage engineering projects, including timelines, resources, and teams. They also track work progress to ensure projects are delivered on time and meet specifications.
• Ensuring safetyElectrical engineers ensure that installations and applications meet safety standards and are in line with customer needs. They also carry out work in accordance with safety procedures.
• CollaboratingElectrical engineers often collaborate with teams from other departments, so they need to be able to communicate complex ideas clearly.
• Analyzing performanceElectrical engineers perform quality and performance analysis on new and legacy systems. They also summarize data and report on test results.
• Preparing budgetsElectrical engineers examine the needs of new equipment, calculate costs, and help prepare budgets.

Electrical engineers should have strong organizational and communication skills, as well as problem-solving abilities, attention to detail, and a deep knowledge of electrical engineering codes and safety standards.

• Building relationshipsAccount managers establish and maintain professional relationships with clients. They also work to increase customer satisfaction and retention.
• NegotiatingAccount managers negotiate and close business contracts with clients. They also mediate between the company and its customers.
• Tracking metricsAccount managers track and forecast key account metrics, such as quarterly sales results and annual forecasts.
• ReportingAccount managers prepare reports on account status and present insights to management. These reports can help the company identify buying patterns.
• CollaboratingAccount managers collaborate with internal teams to ensure that products or services are delivered smoothly. They also stay up to date on industry trends and competitors to provide valuable client insights.
• CommunicatingAccount managers act as a communication link between a client and a business. They communicate with the company's upper management to keep them updated on customer-related issues.
• Managing accountsAccount managers manage a portfolio of accounts to achieve long-term success. They also oversee account representatives to boost sales.

Account managers work in a variety of industries, including marketing, finance, event planning, software, and advertising

• Problem solvingEngineers use scientific and mathematical skills to create real-world solutions to practical problems.
• DesigningEngineers create detailed technical plans for ideas and concepts. They may also design prototypes for various applications.
• TestingEngineers test products, software, or infrastructure to ensure they are working as intended.
• Project managementEngineers ensure projects are completed on time and within budget. They also prepare project estimates and budgets.
• CommunicationEngineers communicate with clients and coworkers about analysis results. They also provide clear and detailed information to their team members about project analysis and design.
• Regulatory complianceEngineers obtain all necessary legal requirements and approvals to ensure projects move forward as planned. They also complete regulatory documents concerning safety issues.
• DocumentationEngineers develop detailed reports and manuals that direct how clients or team members will use a new machine.
• TeamworkEngineers work within a team and must be able to cooperate with other coworkers to ensure the success of a project.
• Maintaining knowledgeEngineers maintain and develop their personal engineering skills and knowledge.

The exact day-to-day duties of an engineer will vary depending on the industry in which they work. For example, an IT engineer will spend a lot of time behind the computer, while a civil engineer may be outside taking measurements for a new road.

• Training new hiresHelping new employees understand their role and transition into the company, including providing orientation and explaining policies and job duties
• Managing workflowDefining goals for the team to work towards, and ensuring they are completed
• Creating and managing schedulesPlanning and organizing schedules for the team, to ensure they operate within deadlines
• Reporting to senior managementReporting on team performance to human resources and senior management
• Resolving conflictsUsing active listening skills to understand employee complaints and work with them to find a solution
• Evaluating performance and providing feedbackReporting on team member performance to senior management, and providing feedback to team members
• Setting goals and deadlinesCreating performance goals and setting deadlines that match the company's plans

Other responsibilities of a supervisor include: Promoting a positive work culture, Promoting employee engagement, and Mitigating risks.

Job Duties and Responsibilities

• Maintaining accurate documentation
• Issue documents, creating document templates and input documents
• Coordination on instructions and documentation requirements
• Ensure preparation of documents / project documents on a timely manner
• Other Ad-hoc duties and administrative work assigned

Requirements

• Minimum qualification of GCE 'O' level Certificate
• Minimum 3 years of related working experience
• Knowledge in Microsoft Office programs
• Able to work independently and diligently, prioritize job tasks assigned

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Job Description & Requirements

Responsibilities:

· Understanding process requirements from Technical Spec & P&ID.

· Interaction with customer for getting inputs for designing and Development of Control System.

· Preparing the flow chart, FDS / FCD, system configuration, P&ID for Instrumentation and verifying the electrical drawing.

· Developing the PLC programming, HMI / SCADA Designing as off-site development and onsite commissioning.

· Field wiring and commissioning the instrumentation such as transmitters, switches, valves and motors.

· Conducting Factory Acceptance Test (FAT), Site Acceptance Test (SAT) and related document preparation.

· Commissioning & troubleshooting for new & existing systems & Interaction with customer for Commissioning execution.

· Involve in the installation of new Equipment’s during plant expansion.

· Carry out Equipment improvements projects and modifications.

· Manage Projects including Testing and commissioning, on site installation, repair, maintenance and test tasks.

· PLC Programming of Life Safety Systems configurations.

· Diagnose errors or technical problems and determine proper solutions.

· Produce timely and detailed reports.

· Installing small additions and changes to existing systems.

· Follow all company’s filed procedures and protocols.

Requirements:

· At least 5 years of hands-on experience in PLC & SCADA developments and Maintenance

· Hands-on experience in Siemens S7-400 CPU, Mitsubishi, Proface, Panasonic, Allen Bradley PLC’s and redundant system configuration

· Hands on experience in Wonderware ArchestrA SCADA system, WINCC and TIA Portal

· Familiar with Automation and Control engineering

· Proficiency in Profibus communication and troubleshooting

· Bachelor’s Degree in Electrical / Electronic Engineering or above

· Knowledge of MS Office

· Basic knowledge in Mechanics, Pneumatics and Hydraulics.

· Strong personality with a hands-on attitude.

· Ability to work rotating shift and perform overtime on weekdays & weekends.

· On call support during and after office hours.

Main duties & responsibilities:

• Factory Environment: General cleaning tasks, washroom maintenance
• Assist in any tasks assigned
• Prepare, organize, pack accordingly for delivery or collections

Requirements:

• Working hours Mon to Fri, 8.30am to 5.45pm
• Must be able to work in warehouse/factory setting
• Positive attitude and willing to learn

Benefits:

• OT Pay x1.5 & x2
• Birthday Leave
• Medical benefit

Interested candidates may call 6749 9386! Located at Woodlands.

工作职责:

• 工厂环境，一般清洁工作，洗手间
• 根据包装清单准备、安排、分发产品
• 协助完成分配的任何任务

工作要求:

• 工作时间 08:30 - 17:45
• 适合在仓库/工厂环境中工作
• 积极的态度和愿意学习

工作福利

• 加班费
• 生日假期
• 医疗福利

有兴趣者可以拨打至6749 9386! 位于在兀兰工业区。

Job Description & Requirements

Job Description:

• Quantity take-off and cost estimation sourcing of contractors and suppliers
• Understanding the requirements, prepare and submit tenders with specific deadline
• Liaise and coordinate with the Consultants, Clients and Sub-contractors
• Contract and tender document administration
• Collaborate with project team and tender department to ensure all drawings are in order as per design requirements.

Requirements:

• Degree/Diploma in Quantity Surveying
• Minimum 2-3 years relevant experience in building and construction industries - ACMV SYSTEM
• Fresh graduate is welcome to apply
• Possess strong project organizational skills, resourceful, energetic and able to work independently as well as in a team
• Good communication, interpersonal and problem solving skills

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

Duties/Areas of Responsibility

· Manage maintenance, repair, operations, and upgrading works for ACMV projects

· Assist in development and project process management.

· Overseeing site installation works, supervising sub-contractors, and attending site meetings

· Possesses leadership, ownership, and responsibility with the team for discussions on technical solutions

· Project construction management and safety management

· Construction meeting and preparation with subcontractors

· To plan, implement and monitor weekly works activities with Site engineering

· Testing and commissioning of ACMV system as per the schedule.

· Attend RTO inspection and prepare as built drawing based on site coordination

· Any other related projects to be assigned

Job Requirements

· Minimum MUST have 2 years local site experiences

· Looking for Career Progression

· Possess adequate qualification in Mechanical Engineering

· Direct work experience within ACMV construction industry

· Experience in handle multiple projects simultaneously

· Knowledge of codes, standards and procedures

· Proficient in MS Office, AutoCAD, Helpdesk application, etc

· Able to work with fast pace environment

· Positive attitude

Job Responsibilities:

• Perform the full spectrum of the purchasing process.
• Review and verify Purchase Orders prepared by the purchasing team to ensure the most economically favorable terms and timely procurement.
• Ensure purchasing documents are approved in accordance with the authorization matrix.
• Negotiate with suppliers to seek improvements in pricing, product quality, and delivery arrangements.
• Match suppliers' invoices with supporting documents, such as PRM, Purchase Orders (P/O), and Delivery Orders (D/O).
• Liaise with and follow up with subcontractors, suppliers, and vendors.
• Ensure quoted items match the required specifications.
• Maintain up-to-date pricing information and supplier databases.
• Attend to technical matters, including arranging service technicians for breakdowns/repairs and equipment for annual calibration.
• Advise the project team regarding delivery arrangements.
• Handle non-conforming supplies.
• Supervise and monitor store department activities and conduct periodic stock counts.
• Prepare monthly inventory reports for the Accounts Department.
• Adhere strictly to company purchasing procedures and ISO standards.
• Provide on-the-job training for new staff members.
• Ensure all purchasing contracts comply with contract specifications, obligations, warranties, and company policies.
• Requisition materials according to technical and engineering specifications.
• Perform other duties as assigned by the Procurement Manager.
  
  Job Requirements:
• Minimum diploma requirement needed
• Knowledge of USB is an advantage.
• Proven experience in planning, purchasing, and inventory management.
• Proficiency in MS Office applications.
• Strong communication and interpersonal skills

Training will be provided, and willing to work 5.5 days a week, with Saturdays being alternate
Location: Woodlands, near Admiralty MRT, within a 10-minute walking distance

Responsibilities:

• Responsible for planning, coordinating and overseeing day-to-day operations for both Key and Local projects.
• Supervision of Engineering team by providing leadership and clear direction.
• Allocation of resources to meet all project goals.
• Develop strategies, manage budgets, and ensure successful project execution.
• Establish technical policies to improve the efficiency of the team.
• Play a vital role in the research and development of new products and technologies.
• Arrange ongoing activities beyond specific projects to support and grow their team.
• Work closely with the Sales team to support all new projects

Requirements:

• Degree in Mechanical engineering or Mechatronics
• Minimum 5 years of experience in the Engineering field
• Strong technical skills and knowledge
• Experience in project management
• Strong management skills
• Able to communicate effectively
• Leadership qualities and able to lead a team

Candidate(s) who are interested, please send your resume (with photograph) to

[email protected]

Please state:

- All Last Drawn Salary

- Expected Salary

- Date of Availability

Only shortlisted candidates will be notified.

Brief Summary:

To support, develop and implement improvements to product quality and systems

Job Description:

· Create acceptance test plan based on customer drawing

· Support internal instrument calibration activities

· Support master equipment calibration by sourcing external parties

· Support quality First article inspection (FAI) activities

· Provide production metrology technical support on Zygo New View Measurement

Qualifications:

Nitec in an engineering discipline

Required Skills & Abilities:

· Microsoft Office applications such as Excel

· Excellent verbal and written communications skills

· Good analytical skills to interpret data

· Good problem-solving skills

· Good interpersonal skills and a team player

· Experienced in a manufacturing environment will be advantageous

*3 months contract, subject to extension

Interested applicants can also send your resume to [email protected]

Job Description

• Create shop drawings from construction drawings, hand-drawn sketches and verbal instructions
• Liaise with clients and consultants on project specification
• Assist in quantity measurement
• Any adhoc duties as assigned

Requirement

• Must be able to speak mandarin to communicate with chinese colleague and clients
• Proficient in AutoCAD software and basic computer software
• Experience in structural steel works
• full-time position available
• All applications to be strictly via emails.

Duties/Areas of Responsibility

• Draft and prepare shop drawings of the given structures, components, and devices
• Possess a strong understanding of ACMV principles, including ventilation rates, duct sizing, pipe sizing, and equipment selection.
• Review design specifications, measurements, and drawings to participate in the process of solving on-site problems or design changes
• Develop accurate and detailed 3D BIM models of ACMV systems, including ductwork, piping, equipment, and components, based on the specifications and calculations (heat load, ESP, Pump friction loss, assist and coordinate with the project team to provide architectural design and technical solutions.
• Assist in the preparation of submission drawings complying with various authorities' guidelines.
• Collaborate and communicate effectively with the Project in charge to ensure timely task completion.
• Strong analytical and problem-solving skills with the ability to troubleshoot and resolve design issues
• Assist the Project in-charge in determining the project schedule
• Follow company policies and ISO procedures to ensure quality services
• Any other duties as required and assigned.

Knowledge and Skill Requirements

• Possess adequate qualifications in Mechanical & Electrical Engineering.
• Relevant experience 3 years in the construction industry.
• Proficiency in Revit MEP, Naviswork and other related BIM software, MS Office, AutoCAD, Autodesk Application, E20 software, etc.
• Strong understanding of ACMV design principles and standards
• Familiar with calculating ETTV, RETV and RTTV
• Familiar with SS553, SS554, Singapore fire code, and Green Mark version 2021

Job responsibilities :

1. Design, develop, install, testing and maintenance of industrial IOT applications and solutions eg. electronics and sensor.

2. Testing products to ensure it is functionable in real situations before deliver to customers.

3. Maintenance system once it is live run.

4. Provide support to plant electronics and project deployment.

Job requirements:

1. Degree/Dip in Info Technology, Computer Sci. EE, Network Engineering.

2. Independent, able to work in a team in a good resolve problems.

3. Familiar with C/C++, wifi-rated, web socket is a plus.

Job Scope & Responsibilities

- Identify, evaluate, and select suppliers based on cost, quality, and delivery capabilities.

- Ensure all purchased items meet specifications and comply with relevant standards.

- Negotiate contracts, terms, and pricing with suppliers to secure optimal cost efficiency and align with project requirements.

- Manage purchase requisitions, orders, delivery, and invoices through the ERP system.

- Monitor inventory levels and forecast demand to ensure timely procurement of necessary materials.

- Collaborate with departments to understand purchasing needs and ensure alignment with company objectives.

- Conduct supplier evaluations and performance reviews to maintain compliance with contractual obligations.

- Build and maintain strong supplier relationships, resolving issues related to delivery, quality, or invoicing.

- Perform additional tasks as assigned.

Job Requirements

- Minimum Diploma qualification with at least 2 years of relevant experience.

- Prior experience in the construction sector and ERP systems is preferred.

- Knowledge of the full procurement process, including Quantity Surveying (QS) experience, is an advantage.

- Strong communication (both written and verbal) and interpersonal skills.

- Self-motivated, resourceful, and with a positive attitude.

• Perform audits and report the effectiveness of the system safety program.
• Support launch vehicle design and development to ensure that customer and internal goals for safety, mission success, and performance are met.
• Ability to develop schedules, manage budget and complete work according to the developed schedule.
• Briefing safety of the program at technical reviews and as part of the safety approval process.
• Support incident investigations with business units, determine root causes and drive corrective actions.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Responsibilities:

• Perform and ensure that assembly builds and test are completed as scheduled and according to required specifications, drawings and work instruction.
• Report and assist Engineers in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.

Requirements :

• NITEC/ Diploma in Mechanical/ Mechatronics Engineering or its equivalent
• Applicants who do not possess the above will be considered on individual merits
• Able to comprehend schematic/ mechanical drawing, is an advantage
• Experience in Orbital Welding and/or Gas Tungsten Arc Welding (GTAW), is an advantage.
• Willing to work in cleanroom environment with shift system (12 hour shift - 8am to 8pm and vice versa)
• Entry level candidates are welcome

Job Description:

Preparation of workpiece for grinding process

Studies & interpret drawing sequence of operation

Inspect of workpiece to ensure meets dimensional requirement

Perform basic preventive & maintenance of grinding machine

Other duties as assigned

Job Requirements:

Preferably with 1 year of relevant experience

Trained or experienced in performing specified duties

Good knowledge in Milling and Grinding machines

To perform the following main task :-

1. Admin issues in Delivery order & invoices

2. Supplier payments

3. Basic office purchasing

Responsibilities:

- Provide administrative support to the rental department, including processing rental agreements, invoices, and rental returns.
- Coordinate equipment bookings, schedules, and logistics for delivery and collection.
- Maintain accurate records of equipment availability, maintenance schedules, and customer interactions.
- Assist in managing inventory levels and tracking equipment utilization.
- Handle customer inquiries, requests, and complaints related to equipment rentals.
- Prepare reports on rental operations, equipment status, and financial performance.
- Collaborate with the sales team to promote rental services and support business development efforts.
- Ensure compliance with company policies, safety regulations, and contractual obligations.

Requirements:

- Diploma in Construction Management, Engineering, Business Administration, or related field.
- Minimum of 1-2 years of experience in rental operations of construction machinery or similar role within the construction industry.
- Proficiency in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).
- Strong organizational skills with attention to detail and accuracy.
- Excellent communication and interpersonal skills, with the ability to interact effectively with customers and colleagues.
- Ability to prioritize tasks, manage time efficiently, and work both independently and as part of a team.
- Knowledge of construction machinery, equipment specifications, and rental processes.