Your responsibilities:

• You will plan project on-site activities with Project Manager including necessary local resources, equipment and milestones.
• Coordinate all on-site activities to ensure the successful execution of start-up, construction, erection, testing and commissioning activities
• Manage the full service cycle from receiving the assigned site area to handing over to the end customer on completion day
• Focal Point between company and client
• You will control project cost for the project site work, monitors actual spend against forecasts, and estimates final cost for the same.
• Experience with Substation Projects will be an advantage

Your background:

• Diploma/Bachelor in Electrical or Mechanical Engineering.
• Minimum 3 years in Service Experience Power sectors with focus on High Voltage 66KV and above transmission network.
• Sound knowledge of and hands-on experience in servicing, maintaining, commissioning and repairing of insert specific product and industry/sector.
• Good understanding of the Transmission regulations and current H&S legislation

Requirements:

* Provide storage/SAN administration and security management experience in various storage technologies, inclusive of direct attached storage, Storage Area Network, and archival storage

* Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting

* Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.

* Provide Backup administration and manage end to end backup infrastructure including backup job policies including Backup to disk and backup to tape

* Provide supporting documentation, reports and other information to management (e.g. backup and capacity reports)

* Experience and knowledge in supporting SAN environment and storage space management

* Performing upgrades and applying patches or firmware updates

* Experience and knowledge with installing and implementing VMware ESXi server, VMware vCenter, setting up vMotion, HA, DRS, and related VMware products such as VM vRealize Operation Manager (vROps), Update manager and other products for virtualization would be advantages.

* Experience with SAN, ServiceNow, Commvault, Veritas Backup Exec, WSUS

Fresh without experience-Starting basic is $2600, after 3 months confirmation is $2700

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Responsibilities

• Establishes mechanical deliverables, prepare related FEED & procurement engineering documents such as Equipment Specification, Mechanical Datasheet, Technical Requisition, SDRL, etc, conduct technical bid evaluation (TBE), prepare TBE Report, and review VCDs independently for Topside Rotating Equipment in meeting customer’s expectations
• Initiates discussion with team and other engineering team members (i.e.yard engineering, basic design and etc.), including subcontractors and consultants on technical issues and design solutions in meeting project deliverables
• Attends to technical queries and issues related to mechanical design and reviews the deliverables (i.e. Equipment Specification, Mechanical Datasheet, Technical Requisition, system specification, function description, etc.)
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates reports on work progress and submits to Lead Engineer for review
• Independently preparess deliverables with reference to Contract Specification, Process Data, P&ID etc to deliver safe, secure and fully functional facilities based on the customer’s safety and reliability standards
• Monitors the progress of subcontractors and vendors in offering guidance to deliver documents which required as an input in meeting project deliverables
• Provides mechanical input to Process, Layout and EICT team detailed calculations, analysis and solutions for mechanical design to deliver safe, secure and fully functional facilities based on the customer’s safety and reliability standards
• Works with other engineering team members as required to achieve functional objectives and deadlines
• Provides support in various engineering projects as required to promote cross-functional learning and development, balance team workload and enhance overall team productivity
• Incorporates HSEQ work cultures and best practices to ensure the successful implementation of HSEQ management systems
• Maintains and executes HSEQ procedures, policies and programmes and drives continuous improvement through risk-based thinking and analysis
• Supports the conduct of HSEQ management system audits to ensure compliance with legislations and company policies

Requirements

• Bachelor’s degree in Mechanical/ Marine Engineering or related engineering disciplines
• Minimum 6 years of working experience in planning, designing and construction of mechanical design in the oil and gas industry
• Excellent proficiency in English (written and spoken)
• Advanced user of Microsoft Office products, AutoCAD and Adobe Acrobat
• Possesses knowledge for Classification Requirements, API 610, 614, 616, 617, 618, 619, 670, 671, 674, 675, 676, 682, 685, ASME PTC, ISO 5199 etc which related to rotating equipment design standard
• Possesses understanding of the rotating equipment working principles, control logic, operation and maintenance requirements. Rotating equipment shall not limit to gas compressors, gas/ steam turbines, centrifugal pumps, positive displacement pumps, etc
• Familiar with different brand /model of rotating equipment such as gas/steam turbines, pumps, etc in the market
• Able to develop/deliver Mechanical Datasheet, rotating equipment specification, Technical Requisition, etc for procurement activities purpose
• Able to review deliverables (e.g. P&ID, process datasheet, load analysis, instrument & control specification etc) from other disciplines (i.e. process, electrical, instrument & control, structure etc)
• Possesses skills of performing technical bid evaluation and preparing technical bid evaluation report for vendor selection. Able to review and conclude the deviatons raised by bidders during technical bid evaluation
• Possesses skills of reviewing vendor delivered documents in detailed engineering phase.
• Possesses knowledge of equipment handling requirements and able to provide input or advice during 3D model review.
• Able to support site activities such as equipment installation, pre-commissioning and commissioning for rotating equipment

Address and Working Hours :

• Tuas, Singapore
• Islandwide transport provided at employees cost
• Mon-Thu: 7.30am – 5.15pm Fri: 7.30am – 4.15pm

Interested candidates with relevant background are invited to send us an updated resume with your earliest availability, current & expected salary to us by clicking on Apply Now button below.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Quest Global Services Pte Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

THANK YOU

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

• Assist QP(S) in the daily supervision and coordination duties including civil and structural works, site investigations, building works, etc
• Lead, monitor and supervise RTOs on Site
• Responsible for the consistency of quality assurance inspections and testing for works
• Attend site meetings and resolve technical issues with Contractor
• Keep quality records of all works, monitor & report on work progress
• Review and comment on contractor’s submissions
• To review and supervise safety, environmental and health matters

Qualifications

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering or equivalent.
• Registered as RE with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• Minimum 5 years of experience in C&S works
• Familiar with steel structure and piling inspection, piling load test and excavation works
• Possess strong initiative, and ability to work independently and within team environment when required
• Good interpersonal, written and verbal communication skills
• Contract duration: up to 12 months
  

Responsibilities:

• Issue Technical Specification and manage piping related packages
• Translate project requirements, classification society requirement, relevant industrial standard and other statutory body's requirement into Technical Specifications for piping related materials, equipment and services to be procured and ensure all procurement arrangement & transactions comply with project's commercial, legal and contractual obligation
• Engage in technical discussions to achieve comparable levels of compliancy for competing suppliers of the same product/system; (providing a good starting point for the commercial negotiation)
• Prepare technical bid evaluations to qualify suitable vendors in terms of quality, track record, cost, delivery, responsiveness to meet project's schedule and compliance to all applicable requirements imposed by project owners & statutory bodies. "Manage and evaluate technical deviation in vendors' proposals.
• Contribute to the engineering process by developing the required deliverables, such as specification documents, reviewed supplier's documentation, functional descriptions, schematic drawings and test and validation plans.
• Work with other engineers from same & different department to implements technical and practical knowledge & deviation into the design and takes care all relevant data is stored accurately in the EMS system
• Manage project owners' requirements, variation orders, comments on engineering documents, construction site issues and etc.
• Prepare and manage piping material take off and requisition order according to project progress/ status
• Verify technical performance of products and systems; (i.e. inspection of equipment at supplier premises, factory acceptance test and etc.)
• Engage with project stakeholders to periodically review procurement methodologies, devising improvement strategies to minimize variability in the supply chain
• Assist in material / cost estimation and contract specs review prior to signing the contract with project owner
• Provide technical support for piping related construction / testing/ commissioning issues

Requirements:

• Familiar with EPCC process of hull (marine) and/or topside (process).
• Able to communicate & write in English
• Able to work overtime when required • Proficient in Microsoft Office products, AutoCAD and Autodesk Naviswork
• Prefer to have at least 1 year of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building

Address and Working Hours :

• Tuas South Boulevard, Singapore
• Islandwide transport provided at employees cost
• Mon-Thu: 7.30am – 5.15pm Fri: 7.30am – 4.15pm

Interested candidates with relevant background are invited to send us an updated resume with your current and expected salary, reason of application and your earliest availability to us by clicking on Apply Now button below.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Quest Global Services Pte Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities

• Responsible for all level 1 onsite and remote technical support and onsite corrective and preventive services on all company products, including gaming machines & systems.
• Responsible for installation, configuration, troubleshooting, replacement and repairing (if any) on the company products in a field environment.
• Maintain a positive image and high customer satisfaction with company’s customers.
• Follow documentation, policies and procedures and perform tasks with minimal supervision and completed the essential paperwork timely.
• Guide/assist the local or oversea customer to investigate or troubleshoot the issue
• Ensure that issues are handled within the agreed service level agreement (SLA) timeframe.
• Explain to customers on basic functionality of company products

Specifications

• 1 - 2 years of working experience in field technical support (Fresh graduates with relevant qualifications are welcome)
• Possess a Diploma or NITEC / Higher NITEC in Computer / Electronic Engineering, Electrical & Electronic Engineering or a related field.
• IT knowledge and technical troubleshooting skill is desirable.
• Work well in a team setting.
• Able to travel overseas for short-term assignments and installations (overseas allowance provided).
• Weekend standby (until 11pm) on rotational basis and to be on-site when as needed/requested by customers (standby allowance provided).
• Have own transport

Responsibilities:

• Handle all Piping (Topside) related work.
• Coordinate with TEC (Topside Engineering Company) for all piping related work.
• Liaise with other disciplines to move piping work forward
• Review and comment all deliverables from TEC.
• Review and comment all documents before send to production.
• Discuss with Client for all piping related work.
• Keep track project schedule and issue all documents to related parties with quality.
• Onboard vessel to carry out inspection at site to do as built for piping arrangement and Isometric

Requirements:

• Min Diploma or Bachelor Degree in Engineering.
• Able to communicate & writing in English
• Able to work overtime when required • Proficient in Microsoft Office products, AutoCAD, SMART PLANT(3D) (Piping+Support)/ AVEVA PDMS 3D
• Prefer to have at least 8 year working experience for similar activities as describe above.
• Prefer to have experience in Offshore Topside project.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building/FPSO Topside module building.
• Good Communication Skill

Address and Working Hours :

• Tuas South Boulevard, Singapore
• Islandwide transport provided at employees cost
• Mon-Thu: 7.30am – 5.15pm Fri: 7.30am – 4.15pm

Interested candidates with relevant background are invited to send us an updated resume with your current and expected salary, reason of application and your earliest availability to us by clicking on Apply Now button below.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Quest Global Services Pte Ltd and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

About Our Client:

• Offering comprehensive retail financing solutions, specializing in financing and leasing services for a wide range of equipment including gas turbines, machinery, compact equipment, engines, and lift trucks.
• West region of Singapore

What You Will Do:

• Perform preventive and corrective maintenance, including repairs, on Automated Storage & Retrieval Systems (ASRS), Order Fulfillment Systems (OFS), and sortation systems.
• Conduct routine electrical and mechanical maintenance for Autostore robots, putaway/pick ports, and conveyor systems; document all maintenance activities.
• Address electrical, mechanical, and software issues as they arise, providing ad-hoc maintenance.
• Plan and execute major system repairs or overhauls, either personally or by coordinating with contractors.
• Communicate effectively with suppliers, operations team members, supervisors, and IT teams.
• Resolve equipment faults promptly and ensure the quality of repair work.
• Report faults to the manager in a timely manner.
• Identify and report health and safety risks, accidents, incidents, injuries, and property damage in the workplace.
• Utilize personal protective equipment appropriately and comply with workplace safety policies and procedures.
• Complete and submit all required paperwork accurately and on time; submit necessary records to vendor systems for warranty purposes.
• Train off-shift personnel on minor equipment issue resolution and establish communication protocols with off-shifts.
• Actively contribute to a safety culture within the organization.
• Inspect completed work to ensure repairs meet specifications and safety standards.

Qualifications:

• Background in Electrical, Mechanical, or Electro-mechanical Engineering.
• Experience with control engineering, industrial automation (conveyors), and maintenance of plant machinery and material handling equipment.
• Proficiency in Programmable Logic Controllers (PLCs), including Siemens S7 300/400/1200/1500 and Omron CX-Programmer.
• Familiarity with SIMATIC MicroBox PC, Siemens touch panels, and control components.
• Experience with SCADA (Supervisory Control and Data Acquisition) and HMI (Human-Machine Interface) systems, particularly Simatic WinCC.
• Knowledge of protocols such as ProfibusDP, Profinet, Ethernet, and AS-i Bus, along with testing equipment.
• Experience with variable Frequency Drives (VFD) and inverters, including SEW EuroDrive, SEW Moviaxis, SIEMENS Inverter, and KEB Inverter F4/F5.
• Familiarity with SAP and warehousing management systems.
• Strong verbal, written, and interpersonal communication skills.

How To Apply:
Please click “Apply” if you are interested & fit to the role.

We regret to inform you that only shortlisted applicants would be notified.

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Dynamic Human Capital Pte Ltd | EA License No.: 12C6253
Toh Qiu Wei | EA Personnel No.: R23116260

Responsibilities:

• The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.
• This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset

• Proven experience as a Software Test Engineer or similar role.
• Proficient in JSON, API, and SQL.
• Experience in regression and end-to-end testing.
• Strong problem solving skill and attention to detail.
• Excellent communication skill.
• Ability to learn quickly and work in a fast-paced environment.
• Experience in writing clear, concise, and comprehensive test plans and test cases.
• Willingness to support BAU operations as needed.

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• Analysis & design of civil & structural works.
• Preparation of design briefs, technical reports, technical notes and authorities submission documents.
• Carry out design activities to deliver cost-effective design deliverables in compliance with statutory and clients’ requirements.
• Co-ordinate with architect and other consultants to resolve interface issues and technical clarifications.
• Preparation of tender documents (conditions of contract, specifications and tender drawings)
• Act as a Lead Engineer for our Mid to Large size projects
• Involved in overall project lifecycle from study, planning, designing, tendering and in construction stages.
• Provides specialized technical solutions and expertise to clients
• Liaise with multiple stakeholders, clients, contractors and relevant parties
• Proactive communication, mentoring and guiding the Team to ensure their constant development

Visa Corporate IT has embarked on a major transformation journey. We are transforming ourselves into a true engineering organization where we put customer experience and end user support first. As part of this strategy, we are consolidating several of our operational functions into a single area focused on providing world class operational support to our end users. This change is geared towards rethinking how we provide engineering support for

the services we're responsible for. As a member of the End User Technology team, this position is responsible for providing our end users best possible solution in Office 365 and Azure technologies. The successful candidate will work with a dynamic and evolving global team that is driving the charge to ensure that Visa is not only the best way to pay but also the best place to work with state-of-the-art end user technology and solutions.

Scope:

Reporting to the Head of Corporate Cloud Engineering, this 3rd level Corporate IT Engineering role is based in Singapore. The candidate will ensure an excellent customer experience with Office 365 and Azure technologies, train the 2nd level Operations team, and handle escalations. Proficiency in Microsoft O365, Windows clients and servers, mobile endpoints, Intune, AD FS, AAD Connect (Entra ID), SSO, Federation, and MCAS configuration is required.

Primary Responsibilities include:

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

• Execute Engineering and 3rd level support for Office 365, including Azure, Conditional Access, Intune, and Entra ID (Azure Active Directory).

• Administrate O365, Hybrid deployment, AD FS, WAPs, and Azure Application Proxies.

• Draft and maintain engineering blueprints and architectural documents.

• Collaborate with Cybersecurity Organization to ensure deployed solutions comply with Visa Security Requirements, supply technical assistance for the investigation and analysis of security alerts, and uphold system security.

• Offer technical support to Operations, Engineering team members, and end users to guarantee prompt problem resolution.

• Coordinate and communicate with all relevant departments, immediately inform appropriate parties of any issues impacting operational efficiency, such as outages, service disruptions, or frequent customer complaints.

• Engage with customers to gather necessary details or communications designs.

• Support internal customers professionally and with a service-oriented approach during M&A activity, new deployments, or service-related configurations.

• Aid other team members in completing assignments to meet goals, deadlines, and OKRs.

• Develop and document policies, procedures, and related training materials for systems administration and operations teams.

• Oversee security assessments and vulnerability management portfolio for Cloud Infrastructure.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Service Engineer (Refinery/Petrochemical/Power Plant Analyzer)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

Local Assignment:

• Perform in-house testing, Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)
• Perform site commissioning/start-up for analytical systems and project-related jobs
• Ensure that testing records and other related technical documents for each analytics system are kept and maintained in the department documentation system
• Ensure ownership of and compliance with all departments and company initiatives
• Perform internal and external coordination with regard to issues related to projects, overseas commissioning, and local maintenance activities
• Carry out customer services for preventive maintenance and shutdown of analytics systems services
• Carry out on-call/ emergency service jobs for local customers
• Support the department training initiatives and assist in developing the skills of new engineers and technicians
• Support the department initiatives on customer service, best practices, testing methods, documentation, job planning, and project execution
• Support the company initiatives on safety and continuous improvement
• May be assigned for long-term service contracts in Jurong Island

Overseas Assignment:

• Perform site commissioning/ start-up services for analyzer systems

APPLY NOW!!!

• Min. Diploma in Electrical/Electronics/ Instrumentation
• Min. 3 years of working experience with Refinery, Petrochemical and power plant analyzer
• Able to work independently and write effective good service report
• Perform work with Hart communicator, computer, and PLC is a plus
• Willing to take up assignments for overseas long/short-term maintenance contract

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65594 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Service Engineer (Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Conduct hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Perform hands-on work in mechanical repairs, installation, and removals.
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with traveling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Technical / Product sales Engineer

Industry: Automation company

Location: Bukit Batok Cres

Working Days: 5 Days

Working hours : 9am - 6pm

Salary : SGD2,200-3,500 (not inclusive of transport allowance, bonus/commission)

Job Responsibilities:

• Develop a thorough understanding of our complete range of product
• Responsible for preparing quotations, proposal according to customers' requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analyzing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products.
• Industry: Electrical & Electronics

Requirement:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/
• Passion for automation, with creative and adaptive approaches

Skills

• PLC programmable logic controller programming, touch panel, Control And Automation

Interested personnel kindly contact WhatsApp: +65 9299 4753 (Marcus)

OR

Email to : [email protected]

Tan Meng Liang Reg No: R23115923

The Supreme HR Advisory Pte Ltd EA No: 14C7279

[email protected]

The Team: S&P Global Market Intelligence team is a creative team of experts collaborating across divisions and driving continuous improvements in platform innovation and usability.

The Impact: Joining our team in Canada, the candidate will be responsible for supporting and expanding our cloud/on-premise infrastructure, monitoring and alerting frameworks, onboarding/migration projects, and interacting with the wider DevOps, QA, and development team.

Responsibilities:

• Collaborate with software development teams to improve application reliability, performance, and scalability.
• Provide BAU Production support, and resolve issues either spotted by monitoring or reported by users before causing business impact
• Develop scripts in Python and Unix shell scripting to automate tasks and streamline processes.
• Design, implement, and manage infrastructure using Terraform on AWS cloud platform utilizing best practices.
• Comfortable with writing database queries, and performing database management with an added advantage of experience in MongoDB.
• Set up and configure monitoring solutions, including Grafana, PagerDuty to ensure system health and respond to incidents promptly.
• Availability to occasionally participate in weekend production releases/deployments.

What We’re Looking For:

Basic Qualifications:

• 7+ years of relevant DevOps and Software Engineering experience.
• Bachelor's degree in Computer Science, Information Technology, or a related field. Relevant certifications.
• Proven experience working with AWS cloud technologies, Terraform, and CI/CD pipelines.
• Familiar with Git/Unix/Linux/PL/SQL skills (MongoDB experience preferred, good experience on scripting or coding would be a plus)
• Familiarity with monitoring solutions such as PagerDuty and other industry-standard tools.
• Demonstrated problem-solving ability and a proactive approach to identifying, resolving issues and raising improvement opportunities
• Ability to adapt to a dynamic work environment and handle multiple priorities.
• Good written and verbal communication skills, including experience speaking to technical and business audiences.
• Be able to work independently, or drive a group of people, to work on improvement projects.

Preferred Qualifications:

AWS Certified DevOps Engineer, Docker Certified Associate, MongoDB certified

If you are a motivated individual with a strong passion for DevOps, application support, and cloud technologies, and if you thrive in a global team setting, we encourage you to apply and join our team of talented professionals.

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Mechanical Service Engineer/Mechanical Engineer
• Working Location: Tuas West
• Working Hours: Monday – Friday, 9 am – 5.30 pm (One Saturday per month, 9 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Perform engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• Conduct other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• Provide a service report with necessary recommendations & findings.
• Provide technical support for site engineers and customers whenever necessary.

APPLY NOW!!!

• Entry-level candidates with Higher Nitec, Diploma or Degree in Mechanical Engineering.
• Able to read and understand basic Mechanical diagrams.
• Proficient in Microsoft Office (Word, Excel, PowerPoint).
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66137 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/Air Conditioning & Mechanical Ventilation
• Position Title: M&E Engineer / Project Engineer
• Working Location: MacPherson
• Working Hours: 5 Days, Monday – Friday (8:15 am - 5:45 pm)
• Salary: Basic up to $3,500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Oversee and manage projects from conception through to completion.
• Conduct site inspections to ensure adherence to engineering standards and practices.
• Prepare reports and documentation in alignment with regulatory and company requirements.
• Provide technical support and troubleshooting solutions when necessary.
• Ensure all activities are conducted in compliance with health and safety regulations.

APPLY NOW!!!

• A diploma in Electrical/Mechanical Engineering.
• Experience in the air-conditioning and mechanical ventilation field is preferred.
• Capable of both independent work and collaboration within a project team.
• Commitment to carrying out tasks safely, competently, and in compliance with all regulations.
• Excellent communication skills to effectively liaise with clients, suppliers, and team members.
• Ability to work under pressure and a proactive attitude in taking initiatives.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66147 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Equipment set up for various systems, conduct testing & commissioning
• Install electronic systems including cabling and storage device
• Perform equipment troubleshooting, repair, and preventative maintenance for the electronics system
• Project management and follow-up with clients
• Provide onsite support to diagnose and rectify technical issues

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Tuas

12-hours shift

Up to 3.2K

Many vacancies

Responsibilities:

• Operate equipment, clean, assemble and maintain the cleanliness of the equipment.
• Maintain the documentation of operations in accordance with cGMP requirement.
• Operate the equipment in accordance with SOP / batch document.
• Perform online monitoring and check through the batch
• Complete all relevant documentation required for packing, maintenance and cleaning of equipment in the work area.
• Maintain the cleanliness of work area to ensure cGMP compliance.
• Perform all duties required to meet the schedule.
• Check dispensed input packaging materials and product details against batch document.
• Co-ordination with Engineering for break down rectification of Packing equipment.
• Participate in investigation of process deviation, cGMP and all other compliance related matters
• Ensure compliance to GxP / Safety / Quality policies.

Requirements:

• Min NITEC /Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines
• Experience in Pharmaceutical industry will be highly preferred
• Candidates without experience are welcome to apply as training will be provided
• Candidate with experience will be considered for senior roles
• Able to commit to 12 hour rotating shifts (8am - 8pm/ 8pm- 8am)

Please email me at [email protected] or telegram at @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628