Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

Senior Software Engineer (Java, J2EE )/ Full Stack Java

Our esteem client is looking for a Senior Software Engineer (Java, J2EE )/ Full Stack Java to design and develop innovative software applications.

Requirements:

• Track record in handling Full Stack Java Development.
• Solid experience in handling "Java/ J2EE" Software application development.
• Strong in Software Design, Development and Support.
• Hands-on experience in system design & developing applications.
• Proficient in Java/ J2EE Software Programming language.
• Experience in handling Software Application development.
• Proven experience as a Full Stack Developer with experience with MEAN/MERN stacks.
• Strong proficiency in front-end technologies such as HTML, CSS, JavaScript (TypeScript)
• Design, develop, and maintain robust and scalable web applications.
• Develop and implement front-end design.
• Develop and implement back-end design and function.
• Involved in User ‘s Requirements Gathering, UAT and Testing.
• Understanding of web application architecture, stateless architecture, and design patterns.
• Minimum 8 years of industry experience with 5 software development lifecycles.
• Degree in Information Technology, Computer Sciences or related field.
• Propose and implement the right technical solution based on the client’s problem area and requirements

If you feel that you have the skill-sets that we are looking for, please apply in-confidence with an updated MS Word Resume to [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Overview: -

• Monthly Salary: Up to $3500 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Develop, document, and support the creation of high-precision plastic injection molds and components for manufacturing.
• Assist the Program team during the initial project quotation phase by providing accurate tooling and product DFM (Design for Manufacturability) that aligns with quality standards.
• Engage with customers for DFM and mold concept reviews to ensure their technical requirements and concerns are properly addressed.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.

You will need: -

• Previous experience or knowledge in Precision Tooling Design/Fabrication, Micro Plastic Injection Molding, or Manufacturing Process Engineering is preferred.
• Proficiency in 3D CAD software, specifically Siemens UG NX or PTC Creo 4.0 and above.

For interested applicants, kindly click "Apply Now"

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

ASSISTANT MANAGER (CLUBHOUSE OPERATIONS)

Work location: Tessensohn Clubhouse (nearest MRT Farrer Park)

As an Assistant Manager (Clubhouse Operations), you will report to our Director (Clubhouse).

Responsibilities:

• Assist Director (Clubhouse) in the maintaining the operations of the entire Clubhouse in the following areas :

1. Jackpot Room
2. Front Office Reception
3. Tenants Management
4. Ad-hoc Development and upgrading works
5. Swimming pool (outsourced)
6. Security (outsourced)
7. Cleaning (outsourced)
8. Horticulture (outsourced)

• Supervise various groups of staff to ensure daily smooth operations of the Clubhouse and facilities.
• Supervise and monitor works of term contractors.
• Inspect and check the Clubhouse premises.
• Plan and ensure works are carried out as per the maintenance schedule.
• Assist Director (Clubhouse) in preparing monthly reports and annual budget.
• Assist in preparing tender specifications for upgrading projects and co-ordinating with the suppliers and contractors.
• Assist in the recruitment and training of new staff.
• Undertake any other tasks as assigned from time to time.

Requirements:

• Minimum Diploma in Business/Marketing/Facilities Maintenance/Building or with at least 3 years of relevant working experience.
• Minimum 3 years’ experience in managing people a group of staff.
• Able to work independently, resourceful, and self-motivated.
• Excellent leadership, organizational and multi-tasking skills
• A team player with a customer-oriented approach.
• Enjoy working in outdoor environment.
• Able to work during weekends and public holidays.
• Valid Class 3 driving licence will be an advantage.
• Proficient in MS Office.

Starting salary will commensurate with qualifications and relevant work experience. We regret that only shortlisted candidates will be notified.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Prepare documentations and coordination with government sectors.

Requirements:

• Degree in Civil Engineering
• At least 5 years of experience in LTA project

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

To assist the O&M Manager in supervising a team of Assistant Engineers (AE) and Technical Officers (TO) to respond, investigate, and perform Preventive Maintenance (PM) and Corrective Maintenance (CM) to the monorail system in compliance with the relevant standard procedures and work instructions.

Duties and Responsibilities

• Lead the team of AEs and TOs in performing PM and CM tasks in compliance with the relevant Standard Operating Procedures and instructions contained in Quality Procedures, Work Specifications, Work Instructions, and any relevant change instructions disseminated.
• Supervises and ensures that PM and CM works are executed in accordance with the established standard procedures / requirements.
• Responsible for the safety of self, and peers at the workplace; off and on trackside throughout the working period.
• Prepares ATW/PTW for Sentosa Monorail systems equipment PM or CM works for Sentosa Development Corporation's (SDC) approval.
• Ensures plan scheduled PM and CM are performed timely.
• Carries out monitoring, review, and follow-up where appropriate on Monorail systems and equipment performance under his charge.
• Manages and controls maintenance spares.
• Plans the yearly and monthly maintenance schedule for all trains, and depot equipment as well as the night work schedule to meet SDC contract requirements.
• Coordinates with SDC pertaining to the schedule of PM, CM works, equipment tests, and other ad-hoc jobs.
• Liaise/coordinates with subcontractors in the servicing and the MOM certification of depot equipment and ensures that works are completed on time and meet SDC's requirement.
• Prepares minutes of meetings and attends progress meetings with SDC.
• Prepares SMM monthly maintenance report.
• Performs SMM administration works including planning of duty roster, approval of OT, leave, petty cash submission, staff coverage, etc.
• Draft all relevant documents like work instructions, work records, etc.
• Certification of staff (AE/TO) after staff have satisfied all the necessary training requirements.
• Raise PRs and evaluation of the RFQ submission.
• Manage and execute Variation Orders (VOs).
• May be required to report for work after office hours on ad-hoc basis, mainly for night trainings or covering of duties for the AEs when they are on Annual/Medical Leave.
• Perform tasks assigned by the supervisor as and when required.
• Working location at Sentosa.

Qualifications and Work Experience

• Recognized Degree or equivalent in Electrical, Electronic, Mechanical, or Mechatronic Engineering, with at least two (2) years of relevant working experience in railway maintenance/ workshop, or
• Recognized Diploma or equivalent in Electrical, Electronic, Mechanical, or Mechatronic Engineering, with at least five (5) years of relevant working experience in railway maintenance/ workshop.

Skills and Competencies

• Good analytical, decision-making, and problem-solving skills.
• Good understanding of Engineering systems and design.
• Good understanding of production assembly setup and process.
• Good in preparing monthly reports / technical design knowledge.

Integrated DNA Technologies (IDT) is the leading manufacturer of custom oligonucleotides and proprietary technologies for genomics applications. Our work is complex and cutting-edge, and our team members are curious, creative thinkers who understand that good data drives smart decisions. At IDT, we realize that although science may be uniform, people are unique. We promote a culture where engaged people are motivated and have opportunities to achieve their full potential, as part of one global team.

IDT is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

This position is part of the Facilities and Engineering Department located in Singapore and will be on-site (Overnight shift: 10pm to 7am). At IDT, we are one global team. We celebrate our differences, engage in healthy debate, and are inclusive. Together, we accomplish great things.

In this role, you will have the opportunity to:

• Be responsible for performing facilities and engineering maintenance and calibration activities in a timely manner to meet operational needs of the organization.
• Carry out fault troubleshooting and equipment failure recovery.
• Support, execute or initiate engineering initiatives to drive continuous improvement.

The essential requirements of the job include:

• Diploma or bachelor’s degree in engineering or sciences with minimum 2 years of working experience in the maintenance related field.
• Aptitude and general knowledge of repair techniques.
• Knowledge of instrument calibration and facility management

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Must be comfortable working with chemicals and follow proper safety and handling instructions.
• Ability to read and interpret printed material, including distinguishing colors, accurately read measurements, and prepare and read written documentation using a computer
• Requires exerting force, repetitive motions, standing, precise finger tasks, reaching, sitting, lifting, bending, pushing/pulling, talking, hearing, walking, climbing, using protective equipment, and maintaining various visual capabilities.

It would be a plus if you also possess previous experience in:

• Six Sigma principles
• ISO 13485:2016
• Manufacturing of DNA/RNA oligonucleotides

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business

Our Training & Simulation Systems business has close to 40 years of experience in delivering innovative learning, training, and simulation solutions to customers in the defence, public safety and security, and enterprise domains. We envision to create a better future together through learning, training, and simulation.

Together, We Can Make A Significant Impact
To maintain consistent practice while also seeking balance with the customer experience, you will maintain awareness of the company’s Quality Management System (QMS) and ensure conformance with policies and processes, while helping the team to stay productive and focused on the solution for the customer.

You will also take on a lead role, where you will lead a team and provide the technical leadership and ensuring that the execution of the sub-system assigned to you runs smoothly and efficiently. Where applicable, you will guide the team on common and/or standardised methodologies, particularly where there are collaborative works with external parties. In addition, as regular duties, you will liaise with the company’s leads from the various products offering to design and implement technology solution.

Be Part of Our Success
You will be involved the development high-fidelity models in a flight simulator. You will be involved in understanding the various aircraft systems or avionics to model, designing, and developing software that accurately reflects the behaviour of the avionics in real-life. You may also expect to apply a different programming language in the course of your work.

• Perform design & implementation of software system projects that define the architecture, components, interface & other characteristics of an application.
• Conduct user requirements, application development, system integration, deployment as well as troubleshooting.
• Conduct testing to evaluate the attribute or capability of the software & determine that it meets the expected results.
• Perform quality assurance & ensure the software meets customers' expectations.
• Cooperate with leads from the various products offering to define solutions for your sub-systems
• Handle and manage the technical budgets with the goal of solution delivery within parameters.
• Technical team management

Qualities We Value

• Prior experience in system design with good understanding of technical trends
• Knowledges of code management software, programming skills
• Proficiency in English (writing and speaking)
• At ease with high-level communication and networking
• Able to learn quickly about products and services, comfortable with technical jargon
• Self-motivated and resilient, with composure to deal with circumstances and customer demands
• Hands-on experience in system design & application development for medium to large-scale projects will be an added advantage.
• Strong in software development, especially in C/C++.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Be 'the driving force' for managing the applications in his/her scope, covering organizational responsibilities such as preparing meetings with vendors and internal stakeholders; setting up and maintaining a good governance structure to keep track of performance; anticipate on developments; know how and when to escalate and to feedback key messages towards both vendors and client's stakeholders.
• Ensure that the necessary IT risk related activities (such as verification and providing documentation for vulnerability scanning, threat assessment, security event monitoring, etc.) are timely performed .
• Assess certificates (like ISO) and Service Organization Control (SOC)/Audit reports, received from 3rd party, involving 1st Line of Defence Risk and prepares a concluding in control statement to be approved by 1st/2nd Line of Defence Risk and Asset Owner
• Identify and resolving problems both as a result of incidents and for continuous improvements.
• Ensure that all hardware and software within the system is suitably up to date, patched, supportable, secured and that application monitoring complies with client's standards and policies.
• Report incidents to 3rd party, provides 2nd line support, monitors progress of 3rd line support of 3rd party on high priority incidents and escalates timely when applicable. In case of incidents on client side (e.g. interfaces, configurations) you may in addition solve the incidents yourself.
• Act as single point of contact for incidents and provides urgency and impact (priority) to the 3rd party.
• Act as single point of contact for incidents and provides urgency and impact (priority) to the 3rd party together with 3rd party) and takes/coordinates appropriate actions.
• Align with 3rd party on release planning and arranges client's response, test, communication on new (SaaS) releases and patches, where needed
• Verify that the client's configured parts are still adequate after a new release
• Continuously improve the automation of testing.
• Determine impact of new/changed client's standards and policies.
• Conduct accurate maintenance of application components in the Configuration Management Database (CMDB)

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

We are the messaging team on TikTok. Our team's mission is to facilitate meaningful user connections through TikTok's messaging experience, which is still in its infancy. We achieve our mission by building and shipping tools that help our users more easily connect and share the things they care about.

Responsibilities:

1. Develop large-scale software systems that powers TikTok app.

2. Improve system design and architecture to ensure high stability, performance and reliability of the product.

3. Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

1. BS/MS Degree in Computer Science or related major.

2. Experienced in building backend services for large-scale consumer-facing applications.

3. Proficient in at least one of the following languages: Go, Python, Java, C++.

4. Deep understanding of computer architectures, data structures and algorithms.

5. Have good team communication and collaboration skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Job Description

Overall Purpose Of The Job (Brief description of the primary purpose of this position)

IT Shared Services (ITSS) provide Service Desk, Infrastructure, and Application support services to business lines globally. The Infrastructure Engineer (Systems) role will engage primarily in Level 2 Systems infrastructure support as part of a larger Design, Build and Run function in the Systems and End User Computing stack in ITSS Support focus includes timely resolution of incidents, fulfilment of requests, and execution of changes.In a non-support function, the Infrastructure engineer can be called upon to participate in IT project-related activities.

Key Responsibilities (Critical responsibilities and skills of this position, listed in order of importance)

• Windows Server Administration (Including but not limited to below)
• Microsoft Windows Operating Systems
• Microsoft Active Directory (including AD Integrated DNS, DHCP)
• Microsoft Exchange
• Microsoft File and Print Server
• Office 365 Support
• Microsoft Skype for Business
• Non-Microsoft Technologies / Cloud Services Administration (Including but not limited to below)
• Azure or AWS Public Cloud infrastructure
• External Mail Gateway Services (SaaS or Appliance based)
• External DNS Systems
• Monitoring Tool Platform
• Secure File sharing appliance
• Backup/Restore Technologies
• VDI and Application Virtualization Infrastructure
• Encryption Infrastructure
• Participate in Major Incident, Incident, Request, and Change resolution
• Participate in project-related discussions and implementations
• Participate in the post-incident review and problem management
• Participate (where applicable) in release and availability management
• Conduct Systems patching and remediation
• Research and review emerging technologies as applicable to the environment.
• Coordinate with Service Desk, L2/L3 support teams, and users around the globe for issue resolution
• Understand and apply knowledge of the environment in order to deliver solutions that meet the needs of the business.
• Work with Business Units, Application Development, and IT teams to deliver to business requirements
• Orchestrate and work with key vendors.
• Actively seek improvements to the team’s process.

Job Profile

Required Skills and Knowledge (Brief description of technical knowledge or skills needed to perform the job)

• Must have the ability to work in a fast pace environment demonstrating autonomy in conforming to strategic intent while adhering to team values at all times
• Mandatory expertise in Server Administration (Microsoft), VMWare, and Client-Server Networking (LAN/WAN, TCP/IP Stack, DNS/DHCP)
• Proven experience in Public Cloud (Azure, AWS) management, deployment, and operations.
• Excellent knowledge of server hardware (including SCSI, RAID, and I/O topology).
• Experience in Application Virtualization (XenApp), Virtual Desktop Infrastructure (Horizon or XenDesktop)
• Technical knowledge of various MS Windows operating systems and database solutions
• Experience software distribution management systems (e.g. Microsoft System Center)
• Experience in monitoring products (E.g. Microsoft SCOM, Solarwinds)
• Experience in using ITSM toolsets such as Service Now.
• Understanding of computer server architectures, including Storage Area Networking (SAN), networking topics
• Problem-solving and root cause identification skills. Strong analytic and decision-making abilities.
• Excellent knowledge of Microsoft’s Active Directory and Microsoft Exchange.
• Excellent knowledge of storage hardware (including Fiber channel, clustering, etc.)
• Experience in Backup/Restore technologies (E.g. Cloud-based, Veeam, Symantec)
• Must have an understanding and working knowledge of PC-based equipment and common PC-based applications.
• Experience producing business-relevant presentations and technical-oriented writing is mandatory.
• Excellent communications and interpersonal and presentation skills.

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

Team Intro:

TikTok's testing platform team, provides technical support for various businesses that need to write and manage automated tests. Mainly including:

The full stack of platform portals and test management functionalities.

The test scheduling system.

The testing framework and solutions.

Job description:

- Responsible for the full stack of the test management platform used by QA engineers.

- Responsible for the internal test framework used by QA and RDs for automated testing on Web and in-app pages (Android, iOS).

- Responsible for the full stack test scheduling platform.

- Responsible for functionality, stability and efficiency of overall test automation solutions in various R&D teams.

Qualifications

-Bachelor's degree in Computer Science, Software Engineering, or a related field. Master's degree is a plus.

- Proficient in JavaScript/ Typescript , CSS , HTML, DOM / BOM , network protocol and other front-end related technologies, have in-depth experience in at least one of the mainstream front-end frameworks (React/ Vue /Angular, etc.) and understand the implementation principle

- Have development experience under Linux, have a certain understanding and experience of MySQL database, message system, cache system

- Good product awareness, service awareness, sense of responsibility, project driving force, can be independent

-Problem-Solving: Exceptional problem-solving skills with a track record of analyzing complex technical challenges and providing innovative solutions.

-Communication: Excellent communication skills, with the ability to effectively convey technical concepts to both technical and non-technical stakeholders.

-Leadership: Strong leadership experience, including team management, mentorship, and technical guidance.

-Agile Mindset: Familiarity with Agile/Scrum methodologies and a history of delivering high-quality software in an Agile environment.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Responsibilities

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

We are the messaging team on TikTok. Our team's mission is to facilitate meaningful user connections through TikTok's messaging experience, which is still in its infancy. We achieve our mission by building and shipping tools that help our users more easily connect and share the things they care about.

Responsibilities:

Develop large-scale software systems that powers TikTok app.

Improve system design and architecture to ensure high stability, performance and reliability of the product.

Collaborate with multiple cross-functional teams to deliver high quality work in rapid product development.

Qualifications

Qualifications:

BS/MS Degree in Computer Science or related major.

Experienced in building backend services for large-scale consumer-facing applications.

Proficient in at least one of the following languages: Go, Python, Java, C++.

Deep understanding of computer architectures, data structures and algorithms.

Have good team communication and collaboration skills.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

Summary of Role:
The candidate in this role is responsible for planning the supply of spare/maintenance/consumable parts to maintain optimum inventory levels (consumables, spares, etc.) and ensure the efficient running of the center. His other roles are being ISO certified and working on End Users Certifications (EUC).

Essential Responsibilities include:

• Plan and schedule Spare parts requirements based on demand plan/material requirement requests from Fabs.
• Regularly review inventory levels for specific categorization of materials.
• Regular monitoring of critical materials to ensure uninterrupted manufacturing.
• Coordinate with warehouse/logistics to ensure accurate inventory levels and stock availability.
• Publish essential spare parts metrics/KPIs to management on a timely basis.
• Derive the material requirement plan based on the master production schedule to procure and source.
• Good Knowledge of Inventory management.
• Oversee the department R&M/Chemicals, etc. stores – upkeep with house-keepings, periodic cycle counts.
• Maintain the inventory database, ensuring timely and accurate recordings.
• In charge of day-in-day-out logistics operations.
• Coordinate with and on the movement of materials.
• Must work closely with operation teams on the center's logistic needs.
• Ensure to adhere to zero safety requirements.
• Work on continuous improvement program in logistics operations.
• Ability to work in a multi-task environment.
• Providing day-to-day operations in FAB production material planning, inventory management, and procurement.
• Planned and monitored production schedule in the high-mix, low-volume environment (HMLV).
• Collaborate across departments in the planning process to plan and purchase materials requirements and meet the production plan effectively.
• Follow through with the orders from the start till delivery and ensure that goods are delivered on time.
• Ability to work in a multi-task environment.

Other Responsibilities:

• Perform all activities safely and responsibly and support all Environmental, Health, Safety & Security (EHS) requirements and programs.
• Support ISO certification and across suppliers' EUC requirements
• Support internal audit program by conducting ISO9001/TS16949 audits, gap analysis, and corrective action implementation
• Research best practices and conduct benchmarking related to QMS processes, methods, and tools
• Based upon the overall Quality System performance, identify critical systems or processes where quality improvements are required, initiate projects or activities to analyze, evaluate and propose solutions to address the problem and improve performance

Required Qualifications:

• Minimum of 5 years of professional experience in procurement, consulting, program management, and supply chain & inventory
• Direct experience in pricing and contract negotiations, supplier relationship management, business strategy, contract manufacturing/outsourcing, and continuous process improvement
• Communicate complex information clearly and concisely.
• Develop and maintain collaborative business relationships with stakeholders and align ISO/EUC requirements for the program.
• Interact with all levels of the organization.
• Perform in a very fast-paced environment.

Job Description

Join our dynamic team as an Engineering Technician, this attachment offers a unique opportunity to gain hands-on experience and technical skills in a fast-growing company serving both the Ministry of Education and multinational corporations. As an Engineering Technician, you will play a vital role in supporting our operations, ensuring the smooth functioning of our supply operations and photocopier services.

Responsibilities

• Assist in the installation and setup of new equipment, including testing and calibration procedures

• Provide training and support to end-users on proper equipment usage and maintenance procedures.

• Troubleshoot technical issues and provide timely solutions to ensure minimal disruption to operations.

• Perform routine maintenance and repairs on photocopiers and printing equipment.

• Collaborate with cross-functional teams to identify areas for improvement and implement process enhancements.

• Maintain accurate records of maintenance activities, equipment inventory and service history.

Skill & Competencies

• Proficiency in troubleshooting and repairing photocopiers and printing equipment.

• Knowledge of electrical systems, mechanical components and digital imaging technology.

• Familiarity with diagnostic tools and software for equipment maintenance.

• Ability to interpret technical manuals, schematics and diagrams.

• Strong attention to detail and problem-solving skills.

• Excellent communication and interpersonal abilities for interacting with colleagues and clients.

• Willingness to learn and adapt to new technologies and processes.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

Team introduction:

The TikTok Engineering Test Team focuses on testing and delivering innovative, high-quality product features of the TikTok as well as protecting user data. Our Mission is to facilitate the release of TikTok features and enhancements from the development to production stage through effective testing, delivering quality at speed.

As a Test Engineer on our team, you will:

1. Design, develop, and implement functionality testing for mobile applications (iOS/Android) and the service of mobile applications;

2. Design test plans for new features and regression test cases;

3. Work on project management, risk management, and process management tasks;

4. Help implement test tools and collaborate with automation/performance test teams to build up internal tools/frameworks/platforms to make the team more productive;

5. Track defects manage bugs during the whole software development cycle.

Qualifications

Minimum Qualifications

1. BS/MS degree in a relevant field: Computer Engineering or EE;

2. 2+ years of testing experience, within mobile application and/or backend service application;

3. Have distributed application and iOS/Android fundamental knowledge;

4. Excellent problems solving skills, ability to coordinate with different local and global teams;

5. Strong passion for mobile internet and building next generation mobile application, can take full responsibility for service end to end quality assurance.

Preferred Qualifications:

1. Familiar with Java/Python/Objective-C/Golang, experience in related projects development;

2. Familiar with performance testing tools, iOS/Android automation, and/or test platform development;

3. Familiar with Redis, NSQ, Zero-MQ, Kafka, Docker, K8s, Hive, Spark.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Responsibilities:

• Preparations and modifications of precast schematic, detailed and production drawings for precast concrete components, steel mould and RC structures
• Developing solutions to the technical & design complications following Singapore’s established standards
• Preparation of 2D and 3D presentations and/or design drawings
• Compilation of data and performance of elementary design computations
• Required to participate in Client liaison, authority consultation, coordination with consultants and subcontractors, and attending design and construction meetings
• May be required to mentor and direct the work of less experienced staff/colleagues
• Handle any other ad-hoc duties and tasks assigned by the Management/Direct Supervisor

Requirements:

• Possess a Diploma or Degree in Civil Engineering
• At least 2 years of related working experience

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]
All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Kester LEW | Senior Consultant
Built Environment (EPC Management)
EA Registration R23114039

Understanding of Big Data Hadoop Ecosystem components (Sqoop, Hive, Pig, Flume)

Experience with Java or Big Data Technologies a plus

Any big data experience with Hadoop, HDFS, cluster management

Experience in designing & developing enterprise application solution for distributed systems

Experience with Hive, Pig & Map Reduce and Hadoop ECO system Framework

Experience in Hadoop and its components like HDFS, Apache Pig, Hive, Sqoop, Spark, Hbase, NIFI, Cassandra

Involved in Design and Development of technical specifications using Hadoop technology

Very well experienced in designing and developing both server side and client-side applications.