Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Gantry Associate Engineer (2 years contract renewable)

4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok office

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

You will be joining a global tech giant. This role focuses on providing technical troubleshooting support to leading app publishers in Greater China through multiple channels (WeChat, Email). You will assist Account Managers in addressing technical inquiries and gain expertise in mobile app monetization, specifically with ad products like AdMob and Firebase.

Responsibilities:

• Build expertise around mobile app ad monetization products and implementations (Android, iOS, Unity)
• Troubleshoot Technical issues from App Developers
• Assist Sales Team on Product and Technical related questions

Mandatory Skills/Qualifications:

• Bachelor's degree in Computer Science or related technical field or equivalent practical experience.
• 5+ years experience Mobile Development Skills (iOS/Android/Unity)
• 5+ years experience of Technical Troubleshooting Experience
• Ability to collaborate with engineers and translate technical concepts to non-technical audiences (and vice versa).
• Ability to speak and write in Mandarin and English fluently and idiomatically

Preferred Skills/Qualifications:

• Experience with Firebase (Analytics, Remote Config, A/B Test)
• Experience in Ad Tech Industry

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ (EA: 94C3609/ R1219669)

• Permanent role with an established company
• Exposure to latest technology

About the company

Our Client is one of the most established company with the high tech manufacturing industry. They have a well-established presence of more than 50 years with a global footprint of more than 20 countries. With rapid expansion plan, they are now looking for a new MES System Analyst (Manufacturing Execution System) / CIM Analyst / Engineer – PROMIS to be a part of their team here in the regional headquarters.

About the job

You will be responsible for:

• Oversee, support, and maintain the MES model, including products, routes, operations, and lot movements.
• Design, develop, maintain, and continuously improve assigned Computer Integrated Manufacturing (CIM) applications and components.
• Provide 24/7 Level 2 & 3 support to ensure smooth operation of production lines.
• Collect requirements, design, develop, and deploy new versions of CIM applications.
• Document requirements and manage enhancements in the assigned area.
• Plan, coordinate, and deliver training for assigned applications.
• Work with other departments to enhance productivity, reduce errors and costs, and contribute to improvement projects as needed.

skills and experience required

As a successful applicant, you will have at least 3 years of experience in MES.

Whats on offer

This is an excellent opportunity to join an established MNC with high job stability.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gehbbtfJ

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK

• Lead digital transformation through AI
• Engagement with senior business stakeholders

About the company

Our Client is one of the most established companies within their industry. They have a well-established presence of more than 15 years with a global footprint of more than 5 countries. With aggressive plan in investing in IT, they are now looking hire their AI Engineer to be based here in Singapore.

About the job

Your role involves:

• Collaborate with cross-functional teams to identify problems and deliver AI-powered solutions.
• Work with large datasets, preprocess data, and select appropriate algorithms for training.
• Continuously improve models by iterating, fine-tuning, and implementing state-of-the-art techniques.
• Contribute to the design and architecture of AI platforms and pipelines.
• Research and integrate new AI methodologies, tools, and frameworks to stay ahead in the field.
• Implement and test models, ensuring high quality and performance.
• Communicate complex AI concepts and results to non-technical stakeholders.
• Engaging with business stakeholders, translate business and technical requirements into data transformation jobs and design data models that powers data lake solutions to support AI/ML initiatives.

Skills and experience required

As a successful applicant, you will have at least 2 years of experience in AI/Machine learning. Exposure to regression models / decision tree regression and Gen A will be of added advantage.

Whats on offer

This is an excellent opportunity to led AI transformation with a leading company.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK (EA: 94C3609/ R1219669)

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

Product area

Google's network provides services to millions of Internet users around the world. Our metros are on the edge of our network where Google connects to its users. The Network Team is responsible for operating that network reliably and at scale. Our team owns the full life cycle of all space, power, and network assets in all of Google’s data centers and metro points of presence globally. From the foundation, we are involved from site acquisition to construction and are accountable for what space and power is delivered. We're involved in every facet of network delivery from architecture and design to installation, configuration, activation, and commissioning.

Job description

As a Network Implementation Engineer, you will be the initial point of our efforts to execute deployment, maintenance, and operations of private data networks worldwide. You will work with Technical Program Managers, Network Engineers, Design and Infrastructure Engineers, Field Engineers within Google, as well as construction and telecommunications vendors and contractors, all to position your team and organization for success.

You will facilitate faster, better, and more efficient, positive outcomes for the business and our customers. Your objective will be to build the world’s most reliable, cost-effective and scalable network to support all of our current and future customers and users globally.

Qualifications

Job responsibilities

• Manage oversight and Quality Assurance (QA) of installation technicians for rack, stack and installation of networking equipment.
• Test and commission routers, optical transport equipment, and other network devices in new and existing network nodes across Google's global network.
• Generate implementation plans and provide technical leadership and guidance during deployment activities.
• Work with project management, network engineering, and rest of the Engineering team to identify in advance potential issues in network installations, including in the areas of facility power Alternating Current/Direct Current. (AC/DC), cooling, security/access, rack layout, and cable management.
• Own network documentation, updating, and maintaining network drawings and plans.

Minimum qualifications

• Bachelor's degree in Network Engineering or Telecom Engineering, a related technical field, or equivalent practical experience.
• 3 years of experience in Dense Wavelength Division Multiplexing (DWDM) or Transmission Control Protocol/Internet Protocol (TCP/IP) or system design operations methodology.

Preferred qualifications

• Experience working with field operation technicians, engineers, contractors, or vendors in a telecommunications environment.
• Experience in collaborating across multiple levels and functions.
• Experience in directing field operation technicians, engineers, contractors or vendors in a telecommunications working environment.
• Ability to engage/influence tactical decision-making.

Chemical Technician

Working Hours: 3 to 4 days per week .12 hour rotating shift (8am to 8pm )

Work location: Jurong (Transport provided at Jurong East
Salary: $1700 - $2600 (Basic) + $725 shift allowance + $200 site allowance

The Chemical Technician is responsible for monitoring and maintaining the operations of the process units and equipment by measuring, recording and controlling process operating parameters.

He/She is also expected to diagnose and rectify systems and components’ faults in accordance to established procedures and specifications and to ensure that the process units and equipment operates safely and efficiently.

Responsibilities:

• Perform minor maintenance.
  Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors.
  Carry out filter changes.
  Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations.
  Adjusting process parameters to optimize process operations under supervision of Supervisors.
  Commissioning and decommissioning of process equipment.
  Performing emergency shutdown of process equipment
  Proper handing and blending of non-conforming and off specs products.
  Preparing plant equipment for maintenance
  Preparing chemicals, including mixing and dilution, for process operations
  Performing inter-tank transfers of chemicals and products based on established quality procedures.
  Performing emergency response activities and drills
  

Requirements:

• NITEC or Diploma in Chemical Process Technology
• At least 3 years’ working experience as Process Technician in a chemical industry

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities :

• Formulate and develop Company’s safety policy and procedures
• Assist and enforce sites to implement site health and safety plans
• Perform health and safety audits on sites
• Conduct periodic health and safety training for site personnel
• Maintain Company's health and safety statistics and records
• Liaise with Government Agencies on health and safety issues, application of factory permit and other safety statutory requirements for compliance by sites
• Investigate all accidents which occur and recommend appropriate health & safety measures to prevent their occurrence
• Assist Senior Project Manager / Project Manager on all site safety matters
• Ensure the Occupational Health Safety management programme are effectively implemented and maintained
• Conduct and plan safety training awareness programme

Job Requirements :

• Diploma / Degree in Occupational Health and Safety, Engineering or a related field
• Minimum 5 years relevant working experience in construction industry
• Possess a valid registration with MOM as Workplace Safety and Health Officer (WSHO)
• Independent with good communication skills
• Possess ECO Certificate (NEA)
• Familiar with Government Regulations relating to Occupational Safety, Health and Environmental
• Certificate in WSQ Specialist Diploma in Workplace Safety & Health level C
• HDB Experience required
• 6 days work week from 8.00am to 5.00pm

• 5+ years of experience with IT networking and IT systems in Data Center and virtualization technologies (UCS, VMware ESXi, vSphere, vSAN, vCenter, Windows Server, Linux Server).
• Hands-on experience in troubleshooting, and maintaining Aruba Wireless Conductor and Wireless Controller and Access Points, Identity Service Engine, Palo Alto firewalls, and network monitoring and management tools
• Experience with AVLP (Audio-Video, Lightings and Projections) equipment maintenance
• Proficient in managing common network services (SNMP,Syslog, DNS, NTP, DHCP, AD, etc).
• Analyze network performance with tools like Wireshark and provide root cause analysis, recommendations, guidance, and expertise in maintaining the highest level of performance.
• Proven ability to perform complex troubleshooting, backup, archiving, and recovery
• Strong documentation skills

Location: Tuas West (transport pickup from Jurong East/ Choa Chu Kang)

Working hours: 8am to 5.15pm (Mon to Fri)

• Ability to read and interpret customer’s tender technical specifications
• Provide costing reference to sales admin/proposal team for cost and delivery estimate.
• Work and furbish all technical related document including (but not limited to) technical clarification, datasheet, proposal drawing and tender technical answer sheet
• Participate in tendering and quotation activities whenever technical support is required; also to support sales and marketing team from technical perspective when needed.
• Collaborate with Sales, Engineering and Procurement teams to gather necessary information for proposal development
• Able to work in fast paced environment and meet tight schedules
• Other ad hoc duties assigned

Requirements

• At least 5 years of experience in oil field wellhead equipment companies (subsea or surface); At least 3 years’ experience in engineering position
• Bachelor’s Degree in Engineering or related fields
• Prior experience in tendering and customer interfacing with oil companies (i.e. via meeting, phone call, written form tendering clarification etc.) will be an added advantage

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

We regret that only shortlisted candidates will be notified.

As a Senior Network Engineer, you will produce detailed network architecture designs and implement network systems to meet the data communication needs as required.

Responsibilities

Design and Document Preparation:

• Provide networking expertise, revise solution architecture drawings and diagrams

• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.

• Prepare ITD (Test procedure) document for OPS Network and SMRC Network

· Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config / Rollback / Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)

Integration Support:

• Support configuration changes to system platforms in factory and customer sites.

• Work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)

• Support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)

• Support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)

• Assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)

• Work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)

• Configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)

• Support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline

• Provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:

• Assist on the hardening of Online / Offline SMRC network equipment and firewalls

• Assist on the hardening of Online / offline OPS firewalls (OPS Network).

• Troubleshoot / fix any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)

• Support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network)

Requirements

· Degree in Electrical / Electronic / Telecommunications Engineering

· Minimum 5 years of experience working in the relevant field/industry

· At least cat 2 security clearance

· Strong advantage on following Professional qualifications:

Ø Cisco Certified Networking Associate (CCNA), Cisco Certified Networking Professional (CCNP), Cisco Certified Design Associate (CCDA)

Ø Huawei Certified ICT Associate (HCIA), Huawei Certified ICT Professional (HCIP)

Ø Or other vendor specific courses, such as Juniper Certified Internet Expert (JNCIE)

· Professional knowledge and experience in network detailed design and implementations

Ø On technologies including SDH, MPLS-TP, IP, IP/MPLS, Ethernet etc,

Ø Cable network design (fibre, copper, structured cabling),

Ø 4G/5G/Wifi network design,

Ø Infra design (Virtualisation, VMWare, Windows, Linux, IT services),

Ø Cybersecurity implementation (Hardening, FW, AV,…),

Ø Scripting (python, …),

Ø Network detailed design, administration, troubleshooting, capacity optimization,

Ø Network security design and implementation.

· Demonstrating a degree of initiative, and resourcefulness in solving problems

· Resourceful and analytical in design activities, ability to use pertinent data for meticulous recommendations

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Design and synthesis of organic functional materials with persistent luminescence
• Design and synthesis of organic functional materials for theranostic applications
• Design and synthesis of nanomaterials for theranostic applications
• Cellular and bacteria studies to evaluate fluorescent probes
• Responsible for conducting high quality research, writing academic papers and collaboration with other researchers

Job Requirements

• Bachelor degree in Chemistry, Materials, Polymers and Chemical Engineering.
• Good knowledge in synthesis and characterization.
• Have good publication record and relevant research experience.
• Highly motivated and independent, strong problem-solving skills
• Good written and spoken communication
• Open to fixed-term contract

• Supervise a team of Service Engineers in delivering a wide array of technical after-sales service support, including installation, commissioning, repairs, and preventive maintenance plans for laboratory and hospital infrastructures, as well as research and analytical equipment within the medical imaging sector.
• Additionally, offer technical consultation to customers, address their requests by troubleshooting issues, and implement corrective measures within the designated timeline, while also preparing service reports.

What are we looking for?

• Minimum Degree in Electronics, Electrical, Mechanical Engineering, or a related field is required.
• Candidates should have at least 6 years of pertinent technical experience in service and maintenance.
• A valid Class 3 driving license, along with ownership of a personal vehicle, will serve as a significant advantage.

Next Step:

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Liew Jie Ru

EA Licence No: 24C2293

Company’s Profile

Our client is an international technology and engineering company that specialises in providing innovative solutions to their esteemed clients. They are dedicated to quality delivery standards with thousands of engineers globally supporting projects. They have an international presence worldwide and are looking out for System Engineers to join their team and contribute to their ongoing success.

Location: Various Project Locations

Working hours: Monday to Friday, Standard Office Hours

Responsibilities:

• Provide technical consultancy advice on system configuration and overall design
• Implement system infra expansion design and configure Monitor System Performance
• Assist clients to verify, isolate and provide a temporary work around for the incident/problem logged.
• Resolve system incident/ problem onsite.
• Escalate unsolvable problems and service requests to the System or Software Engineer and report escalations to Operation/ Project Manager.
• Generate relevant administrative records and reports.
• Apply operating system updates, patches, and configuration changes.
• Upkeep and maintain configuration of the system.
• Contacting OEM/Vendor/subcontractor for technical support.

Requirements:

• Min. Diploma in Computer Science, Computer Engineering or equivalent
• Min. 2-4 years working experience as a System engineer in operations environment.
• Good grasp of technical skills (System) and Infra system design.
• Keen sense of urgency for service performance issues.
• Able to handle demanding service response and recovery turnaround.
• Able to manage daily support tasks to meet stringent SLA requirements.
• Past working experience in Cloud environment is an advantage
• ITIL certification will be an added advantage.
• Good knowledge of Windows Server OS 2019, Active Directory/DNS, HYPER-V and/or VMWARE ESXi is an added bonus

Your recruiter for this job: WhatsApp Celine @ 6421 4966 for a quicker response.

Connect with me on LinkedIn: www.linkedin.com/in/your-recruiter-celine-chan

Celine Chan | R21103433

Talentsis Pte Ltd | EA No: 20C0312

Job Description:

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

Job Requirements:

• Diploma or Bachelor's degree in computer science or related field.
• Minimum 4 years of relevant working experience in the technology space.
• Knowledge on relevant IT standards and practices.
• Knowledge of Information Technology strategy development, including network.
• Experience in SAP software and implementation will be an added advantage.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu
Registration Number: R24124814
EA License Number: 02C4944
People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705
http://www.peopleprofilers.com

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for System Engineers to join their team and contribute to their

ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Providing technical consultancy advice relating to system design and configuration.
• Implement system infra expansion design and configuration Monitor System Performance.
• Assisting the customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Resolving system incident/ problem onsite.
• Escalating unsolvable problems and service requests to the System and/or Software Engineer and reporting the escalation to the Operation/ Project Manager.
• Applying operating system updates, patches, and configuration changes.
• Maintaining the configuration of the system.
• Liaising with OEM/Vendor/subcontractor for technical support.

Requirements:

• At least 2 – 3 years’ onsite Systems Engineer experience
• Good understanding of Infra system design
• Excellent communication skills with customers
• Keen sense of urgency for service performance issues
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Responsibilities

• Build and maintain strong relationships with customers, ensuring excellent service support.
• Troubleshoot analyzers and provide solutions aligned with standard procedures and safety guidelines.
• Liaise with customers to address service concerns and resolve technical issues.
• Prepare service and spare parts quotations in response to customer inquiries.
• Perform in-house repairs and on-site commissioning for various analyzers, including gas and water quality systems.
• Support project teams in conducting Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT).
• Deliver product training to end users and distributors.
• Identify opportunities to secure new preventive and maintenance contracts.

Requirements

• Candidate must have minimum of 2 years experience in servicing of analytical equipment.
• Minimum Diploma in Mechanical, Electrical, Environmental Engineering
• Knowledge of water or air quality analyzers is a huge advantage.
• Candidate with own vehicle is an advantage.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Roles & Responsibilities

• Produce M&E Coordination Shop Drawings: Develop and manage shop drawings for mechanical and electrical systems.
• Problem Resolution: Evaluate and address M&E issues with consultants and sub-contractors, ensuring efficient solutions.
• Client and Consultant Meetings: Attend key meetings with clients and consultants to discuss project updates and requirements.
• Report Preparation: Prepare progress reports and other documentation required by clients or consultants.
• Operational Manuals Submission: Collect and compile operational manuals from suppliers/sub-contractors for project completion handover.
• Compliance Assurance: Ensure compliance with ISO 9000, ISO 14001, and OHSAS 18001 standards.
• Team Collaboration: Work closely with site engineers to resolve issues and co-chair monthly meetings.
• Risk Assessments: Propose risk assessments based on tender drawings and related documents.
• Value Engineering and Cost-Effective Solutions: Develop Value-Engineering and Cost-Effective Design (VCED) solutions for M&E systems.
• Project Scheduling: Review M&E work schedules and lead times to create detailed project timelines using Microsoft Project or equivalent tools for tender projects.
• Tendering Support: Assist in tender preparation by proposing suitable architectural and civil/structural (C&S) solutions, including plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Site Surveys: Conduct site surveys to ensure proper methods of statement and material handling processes are implemented.
• Variation Order (VO) Evaluation: Review on-site VOs and evaluate associated costs in alignment with purchase orders (POs) and tender clarifications.
• Interdepartmental Collaboration: Work with the Planning and Quantity Surveying (QS) departments on related project matters.
• Tender Presentations: Prepare tender presentation slides and present M&E-related details to clients during interviews.
• General Duties: Perform comprehensive M&E functions and other general tasks as assigned.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Electrical and Computer Engineering (ECE) at the National University of Singapore (NUS) is seeking suitable candidates for a Teaching Assistant position.

The job duties include but not limited to:

• Conduct classroom teaching in Electrical/Computer Engineering subjects
• Design and implement Electrical/Computer Engineering laboratory experiments and projects in hardware and/or software domains
• Provide prompt consultation to students
• Assist in grading students’ work
• Assist in course-related logistics for the lecturers
• Assist in Department’s outreach efforts

Interested applicants are invited to submit a detailed CV, a teaching philosophy statement, and transcript for undergraduate studies.

Qualifications

• Good B.Eng./M.Sc./M.Eng. degree in Electrical Engineering, Electronics Engineering or Computer Engineering from a reputable university.
• Strong communication skills in the English language
• Passionate in teaching electrical/computer engineering concepts and skills to the students.
• Proficient in multiple programming languages, especially Python, Java, C.
• Knowledge in software engineering, data structures & algorithms, computer organization, artificial intelligence & machine learning is a plus.

Civil Engineers

We are currently looking for multiple Civil Engineers to support infrastructure projects including coastal protection or energy, water and transport infrastructure.

Main Responsibilities

• You will be part of the key members in project designs throughout the full project lifecycle.
• Deliver technical expertise in areas such as earthworks, road and drainage design, water and sewer systems, WSUD, utilities, paving, minor civil structures, and geotechnical elements.
• Engage in diverse projects of varying scales, handling design, documentation, cost estimation, tender preparation, project scheduling, and ensuring deadlines and budgets are met.
• Oversee tasks with minimal supervision, ensuring timely delivery, effective resource management, and adherence to budgets and financial targets.
• Take responsibility for personal performance and support team development by providing training, guidance, feedback, and direction.

Requirements

• A Bachelor Degree in Civil Engineering.
• At least 3 years of relevant industry experience, with a focus on road design, drainage, water systems, sewer systems, WSUD, utilities in a consulting environment.
• Experience in delivering land development projects for clients, including government authorities or private developers.
• Candidate with a combination of design experience and hands-on construction site experience has added advantage.
• Strong knowledge of relevant regulations, codes of practice, guidelines, and safety procedures applicable to the civil engineering field.

Please contact Ted Tan or email your cv directly in word format to [email protected]

Please note that due to the high number of applications only shortlisted candidates will be contacted.

We regret to inform you that your application for this position was unsuccessful if you do not hear from us in the next 5 business days.

EA License: 16S8131

Recruiter License: R1987706