JOB DESCRIPTION – Network Engineer – Routing and Switching (Level-2)

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per security policies and standards.
• Maintain/Update inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

Job Scope:

• Assist in the design, analysis, and improvement of mechanical systems and components.
• Support assembly planning and execution, ensuring components meet specifications.
• Troubleshoot and resolve assembly-related technical issues.
• Participate in testing and evaluation of products to ensure quality standards.
• Assist in creating and maintaining technical documentation and reports.
• Help with research and development of new mechanical designs and prototypes.
• Ensure proper maintenance and calibration of assembly tools and equipment.
• Coordinate with cross-functional teams (production, quality, procurement).
• Suggest and implement improvements for assembly efficiency and product quality.
• Ensure compliance with safety protocols and quality control procedures.
• Provide day-to-day technical support to the assembly or production teams.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design (preferred)
• Strong project management skills
• Ability to work independently
• Good interpersonal and communication skills
• Willing to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities

• Manage daily network operations related to switches, routers, firewall and VPN to ensure optimal performance, reliability and security
• Install, configure and support network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP servers
• Support the deployment and management of Cisco SD-WAN solutions to optimise network traffic and enhance connectivity
• Monitor and troubleshoot network, arranging scheduled updates
• Report network status and performance metrics to key stakeholders including senior management during incidents
• Coordinate with vendors and support vendor-related activities
• Configure Palo Alto firewall rules to enforce network security policies
• Configure Cisco wireless solutions to ensure reliable connectivity and coverage
• Contribute to automation and continuous improvement process

Requirements

• Eligible to work in Singapore without requiring work pass support i.e. Open to Singaporeans and/or Singapore Permanent Residents due to nature of role
• Degree in a relevant field
• At least 5 years progressive experience in network support and configuration role
• Hands-on experience in the following:

Network routing and switching using Cisco products

Palo-Alto and Cisco ASA firewalls

Meraki

SD-WAN

Z-Scaler VPN

Preferred Requirements

• CCNP-certified

About EPAM

EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work® Certification in 2023 and is committed to providing our team with inspiring careers.

You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Why EPAM?

• By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2022 & 2023.
• Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters.
• You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices.
• We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey.
• At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world. You will learn, contribute, and grow with us.

What You’ll Do

• Develop, test and maintain high-quality software solutions using Kotlin, SQL, Java, Oracle, Openshift/Cloud, Spring Boot and Http4k
• Collaborate with cross-functional teams to design and implement new features and enhancements
• Provide technical guidance and mentorship to team members, fostering a collaborative and productive work environment
• Ensure adherence to best practices in software development, including code reviews, testing and documentation
• Troubleshoot and resolve complex technical issues, providing L3 support when necessary
• Lead and manage the team responsible for L2 support, ensuring timely and effective resolution of issues
• Continuously improve the development process and contribute to the overall success of the team

What Will Make You Shine

• Bachelor Degree of Computer Science or relevant course/ study
• Min 5 years of experience in the relevant field
• Proficiency in Kotlin, SQL, Java, Oracle, Openshift/Cloud, Spring Boot and Http4k
• Proven experience in software development
• Strong problem-solving skills and the ability to handle multiple tasks simultaneously
• Excellent communication and interpersonal skills
• Ability to work effectively in a fast-paced, dynamic environment
• A proactive and positive attitude, with a passion for technology and continuous learning

How We Hire

Here, we summarize the typical journey to finding a job within EPAM:

1. Apply and tell us about yourself

2. Go through some standard interviews:

• General interview with a recruiter
• Technical interview with our technology experts
• Manager interview or Offer interview with a hiring manager

3. Get ready to join the team

Not sure if you meet all the requirements? No problem. Let’s talk anyway and find out more.

It takes 1 min of application to start the journey with us. Apply now!

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for Senior Tender Engineer to make a difference!

This position is accountable for preparing a response to the Request for proposal/Quotation on moderate size and complex Customer’s opportunity, from start to finish, so that the response offered the best Value Proposition. This includes reviewing the RFP/RFQ, determining the scope of works and tasks, determine the best product/equipment/software/services offers, liaising with factories and vendors, challenging the factories and vendors’ offer, costing and determining the market price level, working with various internal stakeholders, i.e. opportunity leader, business leader, project management, engineering, solution purchaser, legal, contract management, solution risk management, analyze risk and opportunities etc. To prepare/revise the offer till the closure of the opportunity, attend and support bid clarification with the opportunity leader, organized Contract Review as well as hand-over package to the project management team. This position is expected to be self driven, taking ownership and initiative to complete the require task within the timeframe agreed with the Opportunity Leader.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Take ownership of the tender process and drive the submission of the Offer
• Analyze request for proposals (RFP)/ request for quotation (RFQ) from Customer and determining the scope of works and tasks
• Liaise with factory personnel in preparing proposal packages and advising on technical matters to prospective clients / consultants
• Ensure and comply to following tendering process
• Ensure the specifications of equipment meets with the customer’s requirements and needs;
• Prepare offer documentation consistent with validated data
• Prepare costing as per standard process and tools and submission of Offer within deadline
• Perform risk and opportunity analysis.
• Ensure compliance of Solution Risk Policy and coordinate for approval
• Deliver a winning bid, with a clear scope with accurate technical and commercial commitments in a timely manner and within the defined tender budget that will result in a clearly defined and profitable contract.
• To assist Account Manager (Sales) during technical and commercial clarification pertaining proposal with clients
• Conduct contract review to ensure contract alignment
• Prepare and handover of opportunity to operation team

What qualifications will make you successful?

• Degree/Diploma in Electrical/Power Engineering
• Experience in tendering process preferably more than 5 years experiences in tendering.
• Good Experience and strong knowledge in Electrical Distribution equipment, systems and solutions especially Medium Voltage Switchgear
• Have minimum 3 years of tendering experience in MV switchgears or in offering electrical distribution solution
• Strong knowledge of Electrical Industry, EPC and customer base in various segments such as Oil & Gas, Utility, CIB and other segments.
• Have experience in product, solution, document approval with consultant, utilities, EPC

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Responsibilities:

· Project coordination and supervision of site installation, testing and commissioning

· Design Development & Calculation for Plumbing, Sanitary and Gas System.

· Preparation of design construction drawings

· Schedule and monitor work program and activity to ensure on-time handover of work and liaise with suppliers/vendors to ensure on-time delivery of materials.

· Work Assessment for Progress Claims and Sub-Contractor’s payment

Requirements

· Diploma / Degree in Mechanical Engineering

· Min 5 years working experiences in design installation and T&C of Plumbing, Sanitary and Gas System

· Good interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Job Requirements:

§ Degree in Information Technology or equivalent

§ Must have minimum 4-6 years of experience in developing software solutions for Java EE web application and Java UI frameworks

§ Must have 3-5 years of experience in Java/J2EE, Spring and Hibernate

§ Must have experience in Agile Development with a good understanding of Agile delivery

§ Good to have Certifications in Java, Java EE etc

§ Excellent written and verbal communications skills

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Job Description

• Coordinate and liaise with project managers, site supervisors, and subcontractors to ensure timely delivery of projects.
• Monitor and track the progress of multiple projects, identifying and resolving any issues or delays.
• Prepare and maintain project documentation, including schedules, reports, and cost estimates.
• Assisted in the procurement of materials and equipment, ensuring on-site availability.
• Attend site meetings and provide updates on project status to key stakeholders.
• Collaborate with the design team to ensure the implementation of engineering plans and specifications.
• Ensure compliance with relevant safety, quality, and environmental regulations.

Job Requirements

• Minimum 3 years of experience as an M&E coordinator or in a similar role within the mechanical engineering industry
• Strong understanding of mechanical and electrical systems, including HVAC, plumbing, and electrical installations
• Excellent project coordination and communication skills, with the ability to work effectively with cross-functional teams
• Proficient in reading and interpreting engineering drawings and specifications
• Familiarity with project management software and tools
• Ability to work well under pressure and manage multiple tasks simultaneously
• Good problem-solving and decision-making skills
• SC/PR only

• Possess a deep understanding of network protocols, risk management, security standards, and regulatory compliance.
• Analyze network traffic patterns, identify bottlenecks, and track performance to proactively address issues and optimize network efficiency.
• Actively participate in network audits and collaborate with stakeholders to ensure the Bank's APAC network adheres to bank rules and regulatory guidelines.
• Establish and enforce network operational procedures, supervise the Network Operations team, review KPIs, and ensure SLAs are met.
• Manage vendors and service providers, including MSAs and SAs, to optimize service reliability and cost-efficiency.
• Coordinate with cross-functional teams on network planning and service-related matters, such as DR drills, third-party risk management, asset management, lifecycle management, privilege access management, and patch management.
• Oversee the design and architecture of the network to ensure scalability, reliability, and security.
• Possess a strong understanding of network budget planning, including Capex and Opex.
• Develop and maintain network performance reports for management review.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field with at least 5 years of experience as a Network Operations Lead or Senior Network Engineer.
• Minimum of 8-10 years of experience in network planning, design, and implementation.
• CCNP/CCDP, ITIL, or equivalent certifications. CCIE certification is preferred.
• In-depth knowledge of network protocols, risk management, security standards, and regulatory compliance.
• Proven hands-on experience in network deployment for large enterprises and data centers.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Proficient with Cisco, Fortinet, Checkpoint, F5, or equivalent network devices.
• Proven ability to work effectively with cross-functional teams.
• Prior experience in the banking or financial industry is advantageous.
• In-depth knowledge of IP routing, switching, BGP, OSPF, SD-WAN, QoS, and VPC.
• Strong technical writing and documentation skills.
• Excellent written and verbal communication skills, capable of presenting to both technical and non-technical audiences.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24981

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Our Client is in the Environmental Industry. Due to their current expansion plan, they are looking for an Finance Manager to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Responsible for full sets of accounting, financial management reports, financial audit and generation of Inventory Report
• Review and Approve Financial Submissions and manage cash flow
• Responsible for GST, Taxation and Annual Surveys
• Responsible on compilation of Trader Profit & Loss
• Manage tracking & reporting from the trading platforms.

Requirement

• Min Bachelor’s degree in finance & accounting
• Min 5 years of experience in financial reporting
• Experience in commodity trading and metals will be added bonus
• Knowledge or experience in currency hedging

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/Production
• Position Title: Instrumentation and Control Engineer
• Working Location: Islandwide
• Working Hours: Monday – Friday, 9.00am – 6.00pm
• Salary Package: Up to $4200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Develop solutions for complex technical issues in sectors including life sciences, power, water treatment, chemical, petrochemical, shipyard, and oil and gas.
• Perform calibration of various measuring instruments such as pressure, temperature, flow, radar level, analyzers, and wireless devices; collect and record data accurately.
• Calculate calibration metrics including range, mA, frequency, required output, and accuracy, documenting the results.
• Analyze and compile technical and statistical information to create detailed reports.
• Maintain accurate and up-to-date engineering documentation.
• Any other task as assigned by the Superior.

APPLY NOW!!!

• Diploma or Degree in Electrical, Electronic, or Instrumentation Engineering.
• At least 3 years of relevant experience in a similar field.
• Possess valid Class 3 driver's license.
• Knowledge of Mechanical and Measuring Instruments.
• Excellent reading, writing, and verbal communication skills.
• Skilled in technical report writing and able to interpret schematic diagrams.
• Willing to work at various locations island-wide.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71604 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: M&E Consultancy Firm
• Position Title: Mechanical Engineer (Building and Infrastructure)
• Working Location: East – Paya Lebar
• Working Hours: 5 days (Mon-Fri: 8.30 am - 6 pm)
• Salary Package: Up to SGD 5500 + Bonus
• Duration: Permanent

Key Responsibilities

• Build relationships with clients, consultants, and contractors from other organizations
• Carry out duties in accordance with company procedures and implement prescribed systems of work
• Understand design philosophy/design fundamentals and communicate engineering solutions to project stakeholders
• Perform engineering calculations with the aid of engineering software such as Computational Fluid Dynamics (CFD), and Full Hydraulic Calculation (FHC)
• Familiar with Architect, Structural/Service Engineers drawings/specifications.
• Carry out investigative and technical review works
• Responsible for the development and production of drawings/calculations/specifications /reports
• Set an example for the placement of students and younger engineers

APPLY NOW!!!

• Degree in Mechanical Engineering recognized by PEB Singapore
• Min. 2 years of working experience in the consultancy firm in the design of ACMV, fire, and hydraulic services
• Experience as a Contractor in project execution will be considered
• Experience in Energy Storage System (ESS) / Capability in carbon, sustainability, resources conservation, and renewables will be an added advantage.
• Carry out tasks and duties assigned in a positive and dignified manner

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67061 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Descriptions:

• To take charge of the construction job site environmental matters
• Identify and assess any foreseeable risk at the construction job site
• To recommend measures to eliminate and foreseeable risk at construction job site
• To lead periodic environmental inspections
• To ensure proper housekeeping is in place for safe and tidy job sites
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum Diploma in Engineering
• Registered Environmental Control Officer with NEA
• At least 3 years of experience in building construction projects

Electrical Engineer (Satellite, Radio Frequency)

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625)

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

Highlight:

• Permanent job opportunity
• Great remuneration & benefits
• Great career progression
• Location: Bugis

Responsibilities:

Product Strategy and Roadmap

• Define the product vision and strategy for the Smart Hygiene system, aligning with customer requirements and market trends.
• Develop and maintain a product roadmap outlining key features, enhancements, and milestones.

Cross-functional Collaboration

• Collaborate with internal teams including engineering, design, marketing, and sales to drive product development and deployment efforts.
• Work closely with customers to gather feedback, prioritize requirements, and incorporate user insights into product decisions.

Project Management

• Lead the planning, execution, and delivery of Smart Hygiene system updates, releases, and enhancements.
• Coordinate with development teams to ensure timely delivery and quality assurance of new features and functionalities.

Market Analysis and Competitor Research

• Conduct market research to identify emerging trends, competitor offerings, and customer needs in the field of Smart Hygiene.
• Utilize market insights to inform product decisions and enhance competitive positioning.

Performance Monitoring and Optimization

• Monitor key performance indicators (KPIs) related to the Smart Hygiene system's usage, adoption, and effectiveness.
• Identify opportunities for optimization and improvement based on user feedback, data analysis, and industry best practices.

Requirements:

• Bachelor's degree in Business, Engineering, Computer Science, or related field; MBA or advanced degree preferred.
• Proven experience in product management, preferably in IoT or technology related industries.
• Strong technical background with a good understanding of IoT systems and technologies.
• Excellent project management skills, with the ability to prioritize tasks and manage multiple initiatives simultaneously.
• Strong analytical and problem-solving abilities.
• Excellent communication and interpersonal skills.
• Knowledge of hygiene standards and practices (preferred).

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

• Project deployment for customers' Enterprise IT Network Services.
• Work closely with Project Manager to fulfil project deliverables.
• Execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Establish TAC cases with principal vendor in complex problem till resolved. Assisting the Customer in the verification, isolation and/or provision of a temporary work around for the incident/problem logged.
• Diagnose and rectify technical issues.
• Perform and manage routine preventive maintenance and operational activities promptly and effectively.
• Documentation skills include creating and updating detailed solution design, installation and maintenance documents. Provide up-to-date project documentation and reports.
• Perform standby duties if required.

Requirements:

• Possess Degree/Diploma in Computer Science/Electronics/IT or equivalent
• Minimum 1 year of relevant working experience in IT infrastructure operation
• Be customer and service oriented, positive working attitude.
• Possess CCNA / CCNP certification (Preferred but not essential)
• Good Knowledge of following products will be advantageous: Cisco switches, IXIA, NTP, SMS Gateway, Data Diode, F5, Solarwinds
• ITIL certification will be an added advantage
• 5 day week @ AMK area

Maestro HR

damien Lee tian hong

R1106726

16C8462

Job Summary:
We are seeking a highly experienced DevOps Engineer to design, implement, and maintain OpenShift platforms across Baremetal, Virtualized, and Public Cloud environments. The ideal candidate will have extensive expertise in Kubernetes, containerization technologies, and modernizing legacy applications using microservices architectures. This role involves leading technical initiatives, collaborating with DevOps teams, and mentoring team members.

Key Responsibilities:

• Platform Management:
  Design, implement, and maintain robust OpenShift platforms on Baremetal, Virtualized, and Public Cloud platforms, ensuring alignment with business goals and industry standards.
• Application Modernization:
  Lead the transformation of legacy applications into microservices architectures using OpenShift for improved scalability, reliability, and efficiency.
• CI/CD & Automation:
  Collaborate with DevOps teams to refine CI/CD pipelines, automation practices, and infrastructure-as-code methodologies using tools like GitOps.
• Deployment & Scaling:
  Ensure seamless deployment, scaling, and management of containerized applications.
• Mentorship & Best Practices:
  Mentor team members by sharing technical expertise, promoting best practices, and fostering a collaborative environment.

Essential Qualifications:

• Experience:
  7-8 years of hands-on experience in OpenShift architecture, Kubernetes, and containerization technologies.
  Proven experience modernizing legacy applications into microservices architectures.
  Experience working within the financial services industry and adhering to industry-specific regulations.
• Technical Skills:
  Expertise in OpenShift components and features, including ACM, ACS, Quay, and ODF.
  Proficiency with DevOps tools such as Git, Jenkins, Ansible, and Terraform.
  Experience with GitOps workflows and infrastructure management tools.
• Soft Skills:
  Strong problem-solving, analytical, and communication skills.
  Ability to work independently and collaborate effectively within a team.

Desirable Qualifications:

• Certifications:
  OpenShift or Kubernetes certification.
• Additional Tools:
  Familiarity with Istio or other service mesh technologies.