Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Under study system design and plan for commissioning.
• Assignment of System / Sub System Boundaries and checksheets for mechanical completion activities to facilitate site commissioning activities.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.

Requirements:

• Degree in Mechanical, Marine and Naval Architecture Engineering with 5 years' experience in marine industry. Or diploma in Mechanical, Marine and Naval Architecture industry with at least 8 years' experience in marine industry.
• At least 5-8 years' experience in marine industry and familiar with various classification codes, regulations and be familiar with Mechanical Completion and Commissioning Procedures
• Be familiar with codes and standards such as IMO, ANSI/ASME/API, Norsok Class codes. Technical knowledge for working on mechanical/piping installation. Be familiar with marine piping system, mechanical structure and their operating principle. Practical experience on marine systems start-up and troubleshooting.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

Job scope:

• Oversee the design, installation, and maintenance of electrical systems in facilities
• Ensure compliance with electrical codes, safety standards, and regulations
• Manage projects related to electrical infrastructure upgrades and improvements
• Conduct regular inspections and audits of electrical systems and equipment
• Collaborate with cross-functional teams to optimize facility operations
• Develop and implement preventive maintenance programs for electrical systems
• Analyze and troubleshoot electrical issues, providing timely solutions
• Prepare and manage budgets for electrical projects and maintenance
• Train and mentor junior engineers and technical staff
• Maintain documentation related to electrical systems, including schematics and maintenance records

Requirements:

• Degree in Electrical Engineering or related fields with a minimum of 3 years of experience
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Experience in project installation of electrical distribution systems
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems, including fire protection, CCTV, PA, and network systems
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Production Engineer / Executive

Location: Tanjong Penjuru
Working hours: Mon to Fri from 7:30am to 5pm
Salary: $3,500 - $4,000

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

We are seeking a Lead Application Support Engineer to to manage and oversee the smooth operation of critical applications, ensuring seamless user experience and system functionality.

• Competitive remuneration package (up to $6,300 + AWS + VB).
• Hybrid working arrangement.
• Leadership Role: Take charge of support operations and lead a dedicated team.

Responsibilities:

• Oversee and manage a 24/7/365 level 1 application support team, ensuring continuous support for both applications and systems.
• Participate in the recruitment and management of staff, including planning and organizing shift rotations.
• Train team members on the application's functionality, interface, and features, ensuring they are equipped to handle support tasks.
• Ensure team members provide adequate support to end-users, while also delegating tasks and responsibilities effectively.
• Take full ownership of all issues raised, ensuring they are resolved, regardless of which development team or vendor is responsible.
• Act as the primary point of contact for both technology teams and end-user clients on a day-to-day basis.
• Maintain and update a knowledge base of known issues, defects, and troubleshooting techniques, and ensure problem tickets are properly managed.
• Handle escalations effectively and manage client expectations to ensure smooth operations.
• Debug and improve application code when necessary to resolve issues or enhance functionality.

Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Minimum of 3 years experience in relevant roles.
• Prior experience in supporting Web-based applications.
• Experience with some programming languages and willingness/ability to learn.
• Familiarity with IT industry practices and methodologies (ITIL foundation certification will be an added advantage).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Highlight:

• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: East / Central

Responsibilities:

• Install, configure, and manage end-user laptops, desktops, printers, and mobile devices.
• Handle onboarding and offboarding processes, ensuring security and policy compliance.
• Contribute to technical documentation and help improve internal processes.
• Provide day-to-day technical support to end users and ensure the smooth running of computers, network devices and printers.
• Troubleshoot and resolve end user application issues, maintain and update technical support documentation.
• Handle asset management, maintain inventory and liaise with vendors.

Requirements:

• 2 - 5 years of IT Technical, end-user support working experience.
• Experience in creating user's account and mailboxes on AD and Exchange.
• Good knowledge on antivirus management e.g. Windows Defender, Symantec, McAfee
• Good knowledge on repair PCs and notebooks such as O/S and Office Application troubleshooting.
• Good knowledge in diagnostic of hardware issues on PCs and notebooks.
• Knowledge in vendor management such like negotiation of pricing, vendor quotation, etc.
• Able to work independently as well as in a group.
• Good organization, communication and interpersonal skills.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

• Conduct research on competitors' products, evaluate their detailed functions, and develop new products and services.
• Perform Market Research on products of Security System in ASEAN region.
• Undertake a survey on existing and future infrastructure, including electrical power and telecom networks, to ensure compatibility of security products and services.

Requirements:

• Diploma in Electronics or equivalent
• At least 2 years of security system testing experience in alarm systems, CCTV systems, and access control systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

You will carry out inspections and audits of permitted sites and produce written reports capturing the findings. You will sometimes have to take tough action to achieve these aims, and on occasions, need to investigate environmental offences. You may also be required to occasionally give evidence in a court of law.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Responsibilities:

• Prepare reports, designs and drawings.
• Make calculations about pressures, loads and stresses.
• Consider the strength of construction materials and select appropriately.
• Provide technical advice on safe designs and construction.
• Obtain planning and/or building regulations approval.
• Analyze configurations of the basic components of a structure.
• Monitor and inspect all work undertaken by contractors to ensure structural soundness.
• Inspect properties to evaluate the conditions and foundations.
• Use computer aided design technology for simulation purposes.

Requirements:

• Degree in Civil or Structural Engineering
• Professionally registered with the Institute of Structural Engineers.
• Expert experience in project management.
• Advanced knowledge of construction methods, materials and legal regulations.
• Sound understanding of physics and mathematics.
• Ability to liaise with professionals from other disciplines.
• Meticulous attention to detail with the superb organizational skills.
• Ability to work under pressure and meet tight deadlines.
• Excellent communication and IT skills.

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

-Able to plan / coordinate site works and resolve drawing details and discrepancies.

-Able to work independently and as a key member of the Site Management.

-Ability to identify potential and occurring problems that affect the schedule of

works at site and recommend solutions to relevant team/department.

-Ensure work safe environment at the work site and manage workers

-Assist Construction/Project Manager in overseeing the daily construction and site

coordination of different activities.

-To monitor the progress of work against the baseline schedule & preparation of

daily records & monthly site progress reports.

-Responsible for general on-site technical and engineering matters.

-Liaise with the consultants on technical and quality issues.

-Arrangement for inspection of works.

-Review drawings for conflicts with Structural/M&E and liaising with consultants to

resolve issues.

About the Role

• Conduct testing and commissioning of lift systems to ensure functionality and compliance with safety standards.
• Diagnose and troubleshoot issues related to lift installations and electrical systems.
• Collaborate with project managers to coordinate on-site activities and ensure timely project milestones.
• Oversee the handover process, including documentation and client communication.
• Ensure all work complies with regulatory standards and company safety procedures.
• Liaise with clients, contractors, and other stakeholders to ensure smooth project execution.

About You

• Minimum NITEC in Mechanical Servicing or Vertical Transportation
• Minimum 2 years’ working experience in lift maintenance
• Required to do standby duty at night and / or weekends
• Team player and the ability to handle work under pressure

Why join Cushman & Wakefield?

As one of the leading global real estate services firms transforming the way people work, shop and live working at Cushman & Wakefield means you will benefit from;

• Being part of a growing global company;
• Career development and a promote from within culture;
• An organisation committed to Diversity and Inclusion

We're committed to providing work-life balance for our people in an inclusive, rewarding environment.

We achieve this by providing a flexible and agile work environment by focusing on technology and autonomy to help our people achieve their career ambitions. We focus on career progression and foster a promotion from within culture, leveraging global opportunities to ensure we retain our top talent. We encourage continuous learning and development opportunities to develop personal, professional and technical capabilities, and we reward with a comprehensive employee benefits program.

We have a vision of the future, where people simply belong.

That's why we support and celebrate inclusive causes, not just on days of recognition throughout the year, but every day. We embrace diversity across race, colour, religion, gender, national origin, sexual orientation, gender identity or persons with disabilities or protected veteran status. We ensure DEI is part of our DNA as a global community - it means we go way beyond than just talking about it - we live it. If you want to live it too, join us.

1x Compound cum Rubbish Collector (SINGAPOREAN/PR ONLY)

Monday to Saturday, 8am to 4pm

❃ Clearing of rubbish chutes

❃ Clean and remove bulky waste

❃ Sweeping of compound area

❃ Maintain overall cleanliness of area

❃ Other ad-hoc work as instructed by management

❃ Able to be work independently.

Salary date: Every 22nd & 7th of the month only.

No daily cash.

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

About the job:

• Perform troubleshooting for client platform related problems.
• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Perform service request related to client platforms.
• Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.
• Involve in client platform implementation/upgrade project.
• Manage client platform implementation/upgrade project.
• Perform on research/evaluation of client platform tools.
• Provide systems related technical advice to customers or project team.
• Manage client platform management systems.
• Manage systems changes through change request process & provide status reports to the relevant parties.
• Perform client platform related presales tasks.
• Gather business &/or application requirements on the infrastructure to perform the infrastructure requirement analysis & design.
• Ensure service level meet requirement. Propose and implement action plan when required.
• Established facility management standards/best practices to ensure operation consistency across project/facility management teams.

About you:

• At least Diploma in relevant to IT
• Knowledge in troubleshoot Window 10
• Minimum 1 year of experience in WOG project.

There’s nothing more exciting than being at the center of a rapidly growing field in technology and applying your skillsets to drive innovation and modernize the world's most complex and mission-critical systems.

As a Site Reliability Engineer III at JPMorgan Chase within the Corporate Technology, Trade Surveillance, you will solve complex and broad business problems with simple and straightforward solutions. Through code and cloud infrastructure, you will configure, maintain, monitor, and optimize applications and their associated infrastructure to independently decompose and iteratively improve on existing solutions. You are a significant contributor to your team by sharing your knowledge of end-to-end operations, availability, reliability, and scalability of your application or platform.

Job responsibilities

• Guides and assists others in the areas of building appropriate level designs and gaining consensus from peers where appropriate

• Collaborates with other software engineers and teams to design and implement deployment approaches using automated continuous integration and continuous delivery pipelines

• Collaborates with other software engineers and teams to design, develop, test, and implement availability, reliability, scalability, and solutions in their applications

• Implements infrastructure, configuration, and network as code for the applications and platforms in your remit

• Collaborates with technical experts, key stakeholders, and team members to resolve complex problems

• Understands service level indicators and utilizes service level objectives to proactively resolve issues before they impact customers

• Supports the adoption of site reliability engineering best practices within your team

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science, Engineering, Mathematics or other related disciplines

• 3+ years or equivalent expertise in site reliability engineering

• Proficient in site reliability culture and principles and familiarity with how to implement site reliability within an application or platform

• Proficient in at least one programming language such as Python, Java/Spring Boot, and .Net

• Proficient knowledge of software applications and technical processes within a given technical discipline (e.g., Cloud, artificial intelligence, Android, etc.)

• Experience in observability such as white and black box monitoring, service level objective alerting, and telemetry collection using tools such as Grafana, Dynatrace, Prometheus, Datadog, Splunk, and others

• Experience with continuous integration and continuous delivery tools like Jenkins, GitLab, or Terraform

• Familiarity with container and container orchestration such as ECS, Kubernetes, and Docker

• Ability to identify new technologies and relevant solutions to ensure design constraints are met by the software team

• Ability to initiate and implement ideas to solve business problems

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=fc93f9317fec3db0b109f54bf05b37b7

Sales Engineer

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

• Shall perform the following administration activities for storage and automate them to the extent possible:
• Storage Area Network
• Provide Installation, administration and maintenance support for Storage Area Network and Enterprise Backup.
• Health check and monitoring of the storage devices.
• Integrate the storage solution’s hardware and software into the customer’s operating environment and ensure full interoperability.
• Regularly update the firmware.
• Ensure comprehensive documentation of the storage solution is in place.
• Prepare test plan in consultation with the customer to ensure the solution can function fully.
• Enterprise Backup Administration and management of Symantec or Commvault backup environment.
• Backup job configuration and scheduling.
• Backup server performance tuning.
• Troubleshoot any backup related.
• Capacity planning for tape libraries and backup servers.
• Perform Disaster Recovery (DR) for all the critical systems and ensure successful rebuild of Production or DR servers after each DR should the need arise.
• Identify potential changes and system improvements for consideration and implementation (continuous improvements)
• Create, maintain and distribute reports of progress to Technical Operations Manager.
• Any other ad-hoc tasks assigned.
• Minimum requirements the resource(s) personnel assigned must be a certified Storage (SAN) and/or Backup Administrator in administration and troubleshooting.
• He/she is/are expected to cover level 1 and level 2 storage related problems and must be an experienced administrator in the following technologies:
• Good knowledge of EMC, Hitachi, and Huawei storage systems