Responsibilities:

- Repairing, inspection, commissioning/installation of steam-and gas turbines and rotary machineries for ships and power generation. Cryogenic equipment services. Bulk material handling.

- Automation service and calibration. Control system service/trouble shooting (PLC). Boiler auto-combustion control and auto feed water control and burner overhauling.

- Willingness to work hands-on in marine, oil & gas industrial environment and work overtime (will be paid).

- Able to travel overseas (paid allowance) at short notice.

Requirements:

- Higher Nitec/Diploma/Degree or equivalent in Mechanical Engineering, Marine Engineering, Automation & Instrumentation/Mechatronics.

- With or without experience in related industry or sea-going experience.

- Good communication skills at all levels, from workers to Chief Engineer/Supt.

- Good command of English to write Service report and able to speak Mandarin with overseas clients.

- Working hours: 5 day/week 0800-1700 hours.

Interested candidates, able to speak English & Mandarin a must to liaise with overseas clients. Also written Service Report in English.

Please email resume with photo to [email protected]

Responsibilities:

· Pre and post technical support to customer on vision

· Provide technical support to customer

· Provide on-site service

· Evaluate and qualify knew products

Requirements:

· Degree or Diploma in Electrical / Optics Engineer

· 3 to 5 years of experience on machine vision application

· Good understanding on camera / lens / optical

a. Conduct feasibility study to develop basic and detailed engineering designs.

b. Manage budget and resources to ensure timely project completion.

c. Manage project to ensure compliance with legal and safety requirements.

d. Motivate team members and develop their skills.

e. Oversee workplace safety to ensure work is performed according to workplace safety procedures.

f. Minimum 2 years experience in Building Construction works.

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

Your areas of knowledge and expertise that matter most for this role:

• Excellent technical analytical ability with strong interest for problem solving.

• Self-motivated team player with good interpersonal and communication skills.

• Past working experience or knowledge of Precision Tooling Design/Fabrication, Micro Plastic Injection Molding Process or Manufacturing Process Engineering related field preferred.

• 3D CAD software skill for Siemens UG NX or PTC Creo 4.0 and above

*Please note that Cyrus is in the process of relocating its office to Loyang by Q4 2024.

• Assist project manager in planning and execution of project plans at the construction site,
• Execute project plan and ensure works are completed as per the schedule and in accordance with contract specification and design drawing.
• Ensure the construction site fulfills the authority's code of practice and complies with house safety rules & regulations.
• Handle correspondence job paperwork and submission.
• Liaise with all parties involved in the project, including authorities, consultants, clients, subcontractors, and suppliers.
• Attend site meetings and inspections, regularly report on progress, and monitor the schedule.
• Prepare site meeting minutes, monitor work schedules, project costing, and procurement, and coordinate with all parties to ensure work progress is completed within the target time and budget.
• Supervise and report the progress of the work to the Project Manager.
• Update construction drawings,
• Give feedback to the project manager on any issue encountered on-site and propose a feasible solution.
• Any other ad-hoc duties assigned by the Project Manager,
• Review of civil & structural working drawings and shop drawings
• Organizing regular meetings with sub-contractor’s technical teams to resolve technical problems in pre-construction and construction phase.
• Preparation of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspections with RTO.
• Reviewing and site supervision of site work.
• Assisting project manager for planning and preparing daily progress reports.
• Tracking and optimizing manpower for each works.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

At Thermo Fisher Scientific, you’ll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life - enabling our customers to make the world healthier, cleaner and safer. We provide our teams with the resources needed to achieve individual career goals while taking science a step beyond through research, development and delivery of life-changing therapies. With clinical trials conducted in 100+ countries and ongoing development of novel frameworks for clinical research through our PPD clinical research portfolio, our work spans laboratory, digital and decentralized clinical trial services. Your determination to deliver quality and accuracy will improve health outcomes that people and communities depend on – now and in the future.

Our PPD® Laboratory Services team has a direct impact on improving patient health through the expertise of scientists, industry thought-leaders and therapeutic experts. As the world leader in serving science, our laboratory professionals bring their commitment to accuracy and quality to deliver groundbreaking innovations.

Office Location: 61 Science Park Rd, 117525, Singapore

Work Setting: Fully On-site (5 times a week on-site)

Work Shift Schedule: Tuesday to Saturday (Happening in 2 Phases)

Phase 1 - First 3 to 6 Months (Starts 1pm to 10pm)

Phase 2 - After 3 to 6 Months (Starts 4pm to 1am)

Shift Allowance:

Phase 1 - SGD 350/month

Phase 2 - SGD 700/month

Discover Impactful Work:

Performs duties and training to acquire the skills required for sample and standard handling in support of the laboratory. Provides support to Sample Coordinator and performs administrative tasks in the Sample Management department. Follows SOPs, applicable client procedures, and fulfills laboratory requests with modest direct supervision.

A day in the Life:

• Performs a variety of simple inventory tracking procedures (receipt, check-in, login, labeling, inventory, transport, check-out, etc.) and administrative tasks in support of laboratory operations.
• Communicates status of tasks to supervisor and/or appropriate laboratory staff.
• Trains on SOPs, regulatory guidelines, and storage requirements.
• Supports response to environmental unit alarms and may participate in on-call responsibilities.
• Performs daily work assignments accurately, timely and in a safe manner.

Keys to Success:

Education

• High / Secondary school diploma or equivalent and relevant formal academic / vocational qualification
• Technical positions may require a certificate

Experience

• Previous experience that provides the knowledge, skills, and abilities to perform the job (comparable to 0 to 1 year) or equivalent combination of education, training, & experience.
• Years of experience refers to typical years of related experience needed to gain the required knowledge, skills, and abilities necessary to perform the essential functions of the job. Years of experience are not to be used as the only determining factor in establishing the job class or making employment selection decisions.

Knowledge, Skills, Abilities

• Familiarity with Microsoft Office including Word and Excel
• Time management skills
• Ability to maintain detailed tracking and documentation clearly and accurately according to SOP
• Written and oral communication skills
• Ability to work in a collaborative team environment

Working environment

Thermo Fisher Scientific values the health and wellbeing of our employees. We support and encourage individuals to create a healthy and balanced environment where they can thrive. Below is listed the working environment/requirements for this role:

• Able to communicate, receive, and understand information and ideas with diverse groups of people in a comprehensible and reasonable manner.
• Able to work upright and stationary and/or standing for typical working hours.
• Able to lift and move objects of 15 to 40 pounds
• Able to work in non-traditional work environments.
• Able to use and learn standard office equipment and technology with proficiency.
• May have exposure to potentially hazardous elements, including infectious agents, typically found in healthcare or laboratory environments.
• Able to perform successfully under pressure while prioritizing and handling multiple projects or activities.
• Exposure to fluctuating and/or extreme temperatures on rare occasions

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

What you will do:

• Provides sales support to the engineering /sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Perform drafting, design and prepare engineering drawings (2D) and documentation as per customer’s/project requirements.
• Create electrical schematic, Design layout plans and detailed designs with AutoCAD software.
• Provide pre-sales support to Sales team, including proposal costing and attending technical clarifications
• meeting and/or presentation with customers
• Products sourcing from suppliers.
• Compilation and submission of all documentations as required as per the project requirements.
• Review customer’s technical comments and revise documentation and drawings.
• Visual Inspection and quality check on products/Systems.
• Prepare Functional Test Documents and Assist Project Operations Team on functional testing.
• Liaise and maintain good relationship with customers, subcontractors and suppliers

What we look for:

• Min. Diploma/Degree in Electrical/ Electronic Engineering
• More than 5 years’ experience in Marine Offshore Protection System with related experience.
• Good knowledge of NFPA/Marine Classification Rules & Regulations
• Familiar with Fire & Gas Detection, Vesda Systems.
• Proficiency in AutoCAD and Microsoft Office especially Microsoft Word and Excel.
• Resourceful, results-oriented, excellent interpersonal skills and business acumen
• Able to work independently and deliver results for multiple projects under tight deadlines
• Willingness to learn new things.
• Basic knowledge OT systems, such as SCADA and DCS
• Basic understanding of cybersecurity concepts and best practices, including risk management, threat modeling, and incident response
• Excellent analytical and problem-solving skills
• Strong communication and collaboration skills

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

We are seeking an Engineer with Silicon photonics experience to work on photonics integrated chips design and engineering. The scientist will work on device design, photonic circuit and layout with commercial Si photonics fabrication and optical to electronic testing and measurements. In addition, engineer work on advanced packaging knowledge for chip integration.

Responsibilities

• Conduct research and development for Silicon photonics chips
• Design photonics integrated circuit
• Perform optical and photonics simulations and optimization
• Work with Si photonics foundry for fabrication
• Perform optical and electronic measurements

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics or Applied Physics or related discipline to Optics and Photonics
• At least 2 years working experience
• Candidate is expected to be familiar with optical, thermal, multi-physics, and system simulation software (such as Ansys Lumerical, RSOFT, Zemax, and COMSOL) photonic layout software and understanding of Si Photonics fabrication
• Experience with optical and electronic test and measurements
• Commercial Si Photonics product design and product engineering is preferred

We're seeking a skilled Full Stack Software Engineer to contribute to the development and implementation of Litmus & Sentinel, our AI guardrails products. As a Full Stack Software Engineer, you'll play a key role in ensuring the responsible and ethical use of AI technologies.

Key Responsibilities

• Collaborate with cross-functional teams to design, develop, and integrate Litmus & Sentinel into products, ensuring seamless integration and high uptime.
• Contribute to the development of frontend and backend modules, leveraging the latest technologies and best practices.
• Conduct regular code reviews, performance evaluations, and technical assessments to maintain high standards of product quality and reliability.
• Work closely with stakeholders to understand requirements and translate them into technical solutions.
• Stay updated on industry trends, emerging technologies, and best practices in AI ethics and governance.

Requirements

Essential Qualifications

• 3+ years of full-stack software engineering experience in building scalable products.
• Experience with NextJS (TypeScript) and building API backend using frameworks such as NestJS (TypeScript) and FastAPI (Python).
• Exposure to cloud-based application development on AWS.
• Demonstrated ability to write efficient code and build software.
• Strong problem-solving skills and critical thinking.

Nice to Have

• Experience in generative AI-enabled applications.
• Interest in data science, artificial intelligence, and machine learning.

We are seeking an engineer with opto-electronic product development experience, tasked with the mission of design, build and manufacturing of Si Photonics chips. The candidate must possess expertise in one of the following areas: opto-electronics, photonics, electronic circuit development, electronics board design, packaging design, or FPGA development.

Responsibilities

• Perform system-level optical and electronic test and measurements
• Prepare and develop prototype to products based on Photonics IC specifications and designs
• Source suppliers, establish supply chain and photonics manufacturing and collaborate with ODM/OEM/contract manufacturing partners

Qualifications

• PhD or Masters Degree in Science and Engineering, Physics, Applied Physics, or a related discipline in Optics and Photonics
• At least 2 years of working experience
• Candidate is expected to have experience in any one of the following areas: circuit and system, FPGA Development, or Advanced Packaging
• Experience in commercial Si Photonics product design and product engineering is preferred.

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Join our R&D team within Chemtech division in Singapore as Electrical and Instrumentation Technician/Engineer.

Your main tasks and responsibilities:

• The job holder is responsible for the execution of preventive maintenance, troubleshooting, repairs, and maintenance of all pilot plant facility as well as maintaining the calibration program of all instruments.
• Develop electrical and instrumentation systems tailored for ATEX or IEC classified environments. This includes designing control panels, crafting intricate wiring diagrams, and meticulously mapping out instrumentation layouts.
• Oversee the installation, commissioning, and maintenance of electrical and instrumentation systems. Troubleshoot and resolve electrical and instrumentation issues to minimize downtime and ensure safety. Conduct routine inspections and preventive maintenance on electrical and instrumentation equipment.
• Ensure all electrical and instrumentation systems adhere to relevant safety standards and regulations. Participate in safety assessments and develop strategies to mitigate risks associated with electrical and instrumentation systems.
• Maintain accurate documentation of electrical and instrumentation designs, configurations, and maintenance records. Prepare technical reports, drawings, and documentation for internal and external stakeholders.
• Identify opportunities for process optimization and efficiency improvement in electrical and instrumentation systems. Stay updated on industry trends and emerging technologies to recommend upgrades and improvements.

To succeed in this role, you will need:

• Diploma or Degree in Electrical Engineering with relevant experiences in pharmaceutical, chemical or petrochemical industries.
• >7 years for Diploma or 3-5 years for Degree experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• •Hands-on experience in ATEX or IEC environment, preventive maintenance, troubleshooting, repairs, maintenance of automation and equipment, as well as maintaining the calibration program of all instruments.
• Ability to conceptualize and provide design for electrical, instrument and control wiring diagrams.
• Requires skills in analyzing malfunctions in control systems and making appropriate repairs. This includes troubleshooting PLCs, field sensors, control wiring, general I/O wiring, & networks/communications wiring.
• Requires skill in the use of technicians' tools such as electric meters, oscilloscopes, calibration devices, electronic testers, etc.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• Proficiency in AutoCAD or other relevant design software.

Location: We are based in Cleantech 3 (This role is for our new R&D Test Centre)

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable

Quantitative Product Development Engineer (Trading)

Job Responsibilities:

• Actively participate in the development and maintenance of equity and futures products, ensuring consistent improvement in online service quality through technical solutions, and take responsibility for the reliability of live trading.
• Collaborate closely with researchers to enable various strategies, regardless of type or scale, to operate efficiently in live trading and generate substantial returns.
• Conduct research and integration of programmatic trading platforms, including implementing and deploying microsecond-level software solutions.
• Optimize the performance and latency of trading and order execution systems across dimensions such as computation, storage, networking, and hardware.

Job Requirements:

• Bachelor's degree or higher in Computer Science or a related field from a well-known domestic or international university, with over 2 years of work experience.
• Proficient in Linux operating systems and meet at least one of the following:a. Skilled in C++ and one scripting language.
  b. Skilled in Python 3 and one statically-typed language.
• Familiarity with production and iterative processes for online services, along with techniques for improving service reliability.
• Experienced with best practices such as Git, code review, and CI/CD, with a strong focus on tool-building and excellence in execution
• Experience in maintaining large-scale, highly complex, mission-critical products.Strong system design skills with expertise in performance, reliability, and availability.Hands-on development experience in any of the following areas: operating systems, databases, storage systems, or distributed systems.

Regret to inform that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R1878287

Business Registration Number: 201735941W.

Licence Number: 18S9037

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• Lead, oversee, and plan the development of autonomous vehicle learning platforms.
• Identify and develop autonomous vehicle hardware and software stacks.
• Actively drive projects to improve existing platform features and add new features to complement and expand the capabilities of the system.
• Engage and mentor Master’s and Undergraduate students as well as industry attachment interns.
• Collaborate with other research engineers and coordinate various activities at the Advanced Robotics Centre.

Qualifications

• Bachelor’s degree in engineering related to robotics field.
• Familiar with vehicle structures, electronics, vehicle kinematics and dynamics.
• Experience with autonomous vehicles Drive-by-Wire (DBW) systems and control.
• Proficiency in CAD/CAM and fast prototyping.
• Familiar with open-source autonomous driving frameworks such as Apollo, Autoware, etc.
• Proficiency in robotics middleware and simulation tools (ROS, Gazebo, Carla, SUMO, Carsim (preferred)).
• Experience in C/C++ and Python development.
• Experience in autonomous vehicles and robotics full-stack development is preferred.
• Experience in remote control system development is preferred.
• Highly motivated individual who can work in a fast-paced environment.
• Meticulous organizer with a positive and can-do attitude.
• Strong team player with the ability to lead projects.
• Good communication, writing and presentation skills.

We are seeking a highly skilled AI Engineer to join our team. The ideal candidate will have experience in developing and deploying AI solutions, including data analytics, machine learning, and deep learning, OpenCV. You'll be responsible for designing, developing, testing, and implementing AI systems that solve complex business problems.

Key responsibilities include but not limited to:

· Develop and deploy AI solutions that solve complex business problems

· Collaborate with cross-functional teams to design and develop end-to-end AI systems

· Work on developing computer vision algorithms, deep learning, and reinforcement learning algorithms

· Develop and maintain scalable and robust AI infrastructure

· Ensure that AI systems meet the highest standards of security, privacy, and ethical considerations.

Requirements:

· Bachelor's or Master's degree in computer science, data science, or related fields

· Strong experience in machine learning, computer vision, and other AI-related technologies

· Proficiency in programming languages like Python, Java, or C++

· Experience with deep learning frameworks such as TensorFlow, PyTorch, or Keras

· Good understanding of software engineering practices, including version control, code review, testing, and deployment

· Ability to work in a fast-paced, collaborative environment

· Excellent communication skills and ability to explain complex AI concepts to non-technical stakeholders.

Position Summary:

The Software Engineer (Industry 4.0) is primarily responsible for driving and executing the Industry 4.0 digital transformation roadmap within the scope of Manufacturing Execution System (MES) and Robotic Process Automation (RPA).

We are looking for passionate individuals who are willing to learn, deliver effective user-centric solutions and able to collaborate and drive projects with cross-functional teams.

Responsibilities:

• Develop and manage existing MES as part of our Industry 4.0 digital transformation roadmap with compliance to data modelling standards and security requirements.
• Explore and drive projects utilizing RPA to automate processes and administrative tasks by collaborating with cross-functional teams.
• Training, knowledge transfer and documentation of developed solutions to operational teams
• Any other ad hoc duties as and when required.

Requirements:

• Diploma or Degree in Computer Engineering or Computer Science
• Preferably at least 1 year relevant working experience in a software development environment
• Solid grasp of software development fundamentals
• Strong analytical skills to translate and optimise business needs into IS/IT solutions
• Excellent communication and presentation skills
• Experience in project management and ability to collaborate with cross-functional teams
• Hands-on experience with UiPath or other RPA tools
• Full stack development in field of web applications, hands-on experience with PHP, C# and Rust
• Experience working in a manufacturing environment
• Presentable, pleasant with strong interpersonal skills
• Self-motivated and possesses positive attitude with strong sense of responsibility
• Good communication skills and the ability to work well in a team
• Proficient in English both spoken and written

We are seeking a skilled AI Technician to join our team. The ideal candidate will have a strong technical background, excellent problem-solving skills, and a passion for artificial intelligence and machine learning. As an AI Technician, you will be responsible for maintaining, troubleshooting, and supporting AI systems and applications, ensuring their optimal performance and reliability.

Key Responsibilities:

• Install, configure, and maintain AI hardware and software systems.
• Data labelling, AI model benchmarking
• Monitor and analyze the performance of AI systems, identifying and resolving issues as they arise.
• Collaborate with data scientists, engineers, and other stakeholders to integrate AI solutions into existing infrastructure.
• Perform routine maintenance and updates to ensure the security and efficiency of AI systems.
• Document processes, system configurations, and troubleshooting steps.
• Assist in the development and deployment of new AI applications and models.
• Provide technical support and training to end-users and team members.
• Stay current with the latest advancements in AI technology and best practices.

Requirements:

• Diploma or Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Interest in working with AI systems and applications.
• Strong knowledge of programming languages such as Python, Java, or C++.
• Familiarity with machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, Scikit-learn).
• Understanding of AI hardware components, including GPUs and specialized processors.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork skills.
• Ability to work independently and manage multiple tasks simultaneously.

Preferred Qualifications:

• Certification in AI, machine learning, or related fields.
• Experience with version control systems (e.g., Git).
• Knowledge of AI ethics and data privacy considerations.

General Accountabilities

• Regular visit to SI key partners to further expand and explore potential sales opportunities.
• Supporting key Partners on Sell out Targets set by HQ.
• Planning product promotion according to R&D and marketing research;
• Provide customer support and product solutions training
• Participate in important project product selection, solution providing, bidding scheme and implementation plan evaluation;
• Develop and implement quarterly sales plans and achieving individual KPI set and any other scopes as determine by management.

Job Qualifications

• Candidate must possess at least a Bachelor's Degree.
• Min. 5 years‘experience in related field.
• Good communication ability, can work under pressure
• Strong understanding and background in video surveillance security market will be advantageous.
• Preferred with relevant technical background experience.
• Service-oriented, analytical and takes ownership to solve problems.