• Responsible for all technical support of new product introduction, including product improvement, component production, and the entire process of product assembly and packaging
• Produce electrical designs that comply with specifications, quality, and safety standards.
• Ability to select appropriate electrical components and cables with due consideration given to size, layout, and cost.
• Produce and revise electrical documentation and drawings. Perform systematic troubleshooting and improvement on new/existing Electrical design.
• Provide technical support to the Operations team during assembly and testing.
• Responsible for effective change management: implementation of Engineering Change Notice & get customer approval for Engineering Change Request.
• Conduct troubleshooting and drive closure on equipment electrical related matters.
• Conduct engineering verification and setup/execute reliability testing plan.
• Receive initial product training, compile, and update product assembly instructions, be responsible for the complete transfer of product technical details from the customer to the company, and continuously improve, and innovate processes and technologies.
• Contact the customer's designated personnel on product-related technical issues.
• Responsible for training the assembly team and implementing improvements within the production team.
• Establish assembly work instructions based on customer’s specifications.
• Monitor, identify, develop, and implement improvements in process control systems and equipment.
• Create Bill of Material & routing in ERP for assembly.
• Troubleshoot and optimize assembly processes and follow up with production.
• Improve process robustness, yield, product quality and process time.
• Define and follow up on special tooling requirements.
• Manage customer documentation (drawings, specification, etc.)

Knowledge, Skills & Abilities

•Possess knowledge in digital circuit design, firmware implementation and hydraulics analog circuit design.

•Understanding of manufacturing processes PCB’s, PCBA’s, LED’s, extrusions, machining/turning, sheet metal, precisions stamping and ALU/SS materials and mechanical assembly processes.

•Knowledge of different types of motor applications, such as DC servo motors, 3 phase linear motors, stepper motors, voice coil motors etc.

•Expertise in one or more of the following areas will be added advantage: Field Programmable Gate Array (FPGA), Digital Signal Processor (DSP), Micro controller and Power Supply.

•Knowledge of stringent grounding requirements used in industrial control systems.

•Electrical drafting knowledge using 2D CAD system and Proficiency in reading and updating technical drawings.

•Able to perform root cause analysis and resolve problems on a conceptual and advanced troubleshooting level.

Qualifications

•Possess at least a Degree in Electrical or Electronics Engineering/equivalent.

•A minimum of 2 years’ working experience in high precision assembly equipment electrical design experience

•Only Singaporean may apply.

Location: Woodlands

Basic $3000-$3500

Have AWS & Bonus

General Purpose/Scope

• Support in process improvements, customer returns, cycle time reduction and scrap reduction initiatives.

Essential Job Duties

• Work closely with Process/Manufacturing Engineer to monitor and improve the process capability.
• Ensure the scrap, production yield and cycle time reduction targets are met.
• Review process issues, NCR and conduct failure analysis.
• Updating of Manufacturing work instructions/routers.
• Participate in cross-functional teams on various improvement projects.
• Conduct Evaluations/Special Build Request.
• Support QA for failure analysis and identification of corrective action for customer returns and internal CAR’s.
• Preparation of the failure analysis report on customer return parts.
• Co-ordinate and expedite First article build with Production.
• Participate as a team player in maintaining a conducive, healthy & safe work environment.
• Maintains good housekeeping, safety and discipline in work area.
• Hands-on experience in assembly of prototype module.
• Perform other duties as requested by management.

Requirements

• Diploma in Mechanical/Mechatronics Engineering is preferred
• 3 to 5 years working experience in manufacturing environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Injection Molding Manufacturing

Salary: $3000-$4500

QUALITY ENVIROMENTAL MANAGEMENT SYSTEM ENGINEERS

• Responsible for performing duties in accordance with quality system requirements as the voice of customers, understand customer specific requirement and expectation to deliver “Customer satisfaction and complaint. Analyse and proper handling of customer complaint, return products and corrective action verification and tracking of customer Engineering change to ensure the ECN is implement.
• To lead and provide support to customer audit and participate in new projects: PPAP submission to understand meet customer quality requirements.
• Access and manage all customer web quality reporting and co-ordinate with internal team on new updated documents.

Requirements:

• Diploma / Degree in Engineering or its equivalent with min 5 years working experience in automotive industry environment.
• Knowledge in Minitab application, EMS 14001, ISO 9001:2015 and IATF 16949:2016 QMS
• PFMEA, CP SPC, 5 why’s, fault tree analysis tools, 8-D problem solving and DMAIC report methodology
• Proficient in Microsoft, possess good working knowledge of QC Tools, GD&T, statistical process control and problem solving knowledge
• A team player with good interpersonal and communication skill and have a strong interest in pursuing technical solutions and breakthroughs

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Responsibilities:

• Manage and monitor the project from project kick-off until machine is delivered to customer for production use.

Job Responsibilities:

• Responsible for Project planning, design & implementation, management and coordination, and client management.
• Communicate with customers effectively to understand their needs and provide propositions to achieve objectives.
• Responsible for meeting all projects’ objectives including meeting specifications, timeline and budget.
• Involve in all phases of projects from conceptualization to commissioning.
• Responsible for monitoring progress of all projects that are assigned to the team till completion.
• Manage customers’ expectations or changes to requirements and propose solutions and costs when necessary.
• Provide technical advices, communicate and coordinate with department heads on project related information and planning for effective resource allocation.
• Lead and manage a team of assigned consultants or contractors allocated to the project.

Job Requirements:

• Diploma / Degree in Mechanical Engineering
• Experience in Mechanical design knowledge at machine level.
• Proficient in MS Word, Excel & Project Management Software is essential.
• Experience in machine assembly, integration, testing and buyoff processes of Automation Machine
• At least 3 years of relevant working experience as a Project Engineer
• Candidates should be able to travel and/or be stationed overseas depending on projects requirements.
• Team player who can work well in cross-functional teams to achieve project objectives.
• Strong project management, planning and coordination skills.

Bachelor’s degree in Mechanical Engineering or relevant degree.• Proficient in using 3D CAD modelling Creo (Creo and Solidworks will act as advantages) and associated Finite Element Analysis tools.• Ability to read & to interpret engineering data, scientific journals, technical procedures, international test standards & type approval specifications.• Great attitude and desire for self-improvement and independent problem solving.• Desire to learn and implement product testing, validation and qualification methodologies.• Willingness, ability, and desire to travel internationally to work with customers and team members.• Good track record in:1. Structural, kinematics and dynamic analysis and FEA simulation.2. Strong in thermodynamic.3. Geometrical tolerance and dimensional analysis (e.g. stack up error).4. Engineering material selection.5. Design troubleshooting.6. Application of analysis tools like FMEA, DOE.3 years and above of experience is preferred, fresh grads are welcome to apply.Experience in Automation will be advantageous.

Company information

Located at Woodlands

Mon to Fri 8.30am to 5.30pm

Salary: $4000-$4800

US MNC

Have AWS & bonus

Responsibilities:

• Reviewing production schedules, processes, specifications, and related information.
• Designing production processes that maximize efficiency and reduce waste.
• Preparing material and equipment lists, purchase orders, cost analyses, and estimated
  production costs.
• Designing the layout of facilities and determining personnel tools requirements.
• Work with NPI Team to improve the Work Instructions (WI) and update WI.
• Work with NPI Team to perfect the BOM and update BOM.
• Managing process documentation and preparing production reports.
• Enforce Safety Procedures and practices at all times in compliance to company safety
  policies and regulatory standards.

Requirements:

• Possess Degree in Mechanical Engineering or related discipline.
• Possess 3 years relevant experience in contract manufacturing environment.
• Experience in medical devices, cleanroom, GMP environment is a plus.

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities

- Work closely with project management team as sourcing representative for new projects, interpret drawings, source, buy and manage parts (deliveries, non-conformance) for new project.
- Be the main contact between supplier and NTS Engineering/ project team on technical queries that may arise during request for quotation stage. compiles technical queries and lead discussions to address them.
- Ensure the price and lead time targets of the new projects are being met.
- Ensure the On Time Delivery of materials for new project based on build plan
- Involved in the ECO routing approval to ensures changes are implemented on time by supporting the information's like price and Leadtime during ECO digestion.

Skills

- Able to interpret mechanical drawings
- Familiar with precision machining parts and secondary process
- Good knowledge in change management for a manufacturing setup.
- Able to create sourcing strategy for new projects.
- Familiar with Southeast Asia Supplier
- Supplier management, projects and material management skills
- Reporting, good interpersonal, communication, cross function management skills

Experience

- At least 5 years' experience in sourcing OR NPI project management in manufacturing set-up
- Experience in managing new projects
- Exposure on managing overseas suppliers (US & Europe)
- Experience in creating sourcing strategy, material project management for NPI
- Able to negotiate price, lead time and payment terms with suppliers, able to understand Engineering Change Orders.

Job Title: Process Assistant Engineer

Salary: Up to $3000 - $3500 (Depends on Experience)

Location: Tuas

Working Days: Monday - Friday

Working Hours: 7.50 am to 4.55 pm

Benefits: Company transport provided, Medical insurance, and Dental coverage

Job Duties:

• Responsible to maintain day-to-day operation of assigned processes in P-ST Semicon Dept.
• Responsible for quality and process issues troubleshooting.
• Responsible for process improvement and cost saving activities
• Provide up-to-date process status and liaise with Production to ensure smooth production operation.
• Provide training and certification to Operators on process operation
• Support ad-hoc engineering tasks assigned.

Job Requirements:

• Possess Degree in Engineering in any discipline
• Minimum 2 years of experience in a manufacturing environment
• Hardworking and able to work under pressure

WONG MENG KANG

Superform Consulting Pte Ltd

R1988500 / 15C7536

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities:

• Project execution, implementation and documentations.
• Plan, direct and coordinate all site activities and committed to meet project schedule, budget, quality and safety targets.
• Check and ensure all installation works conform to project design specifications and contracted terms and conditions.
• Ensure timely completions of all projects and attend to site meetings and negotiate with consultants, clients, suppliers on engineering & contractual matters.
• Able to communicate effectively at all levels.
• Service & Maintenance coordination with customers.
• Good after sales service and customer relationship management.

Requirements:

• Degree in Mechanical / Electrical Engineering recognised by PEB Singapore.
• A resourceful self-starter who possess excellent problem solving skills and negotiation skills.
• Ability to work independently yet co-ordinates and teamwork seamlessly with other departments, works well under pressure and able to meet tight deadlines.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision.
• Able to communicate effectively in English at all levels, both verbally and in written reports.
• Proficient in Microsoft Office, Microsoft Project & AutoCAD.

Summary of the Job: (Primary function of the job)

· Produce complete control solution and software design base on customer specification and Sys-Mac standardized practice

· PLC based software control design & HMI software design

· Integration of third-party equipment’s and components into software design

Example data communication, barcode scanner, motion control, Robot Controllers, vision system and signal conditional

Job Description:

· Developing and troubleshooting PLC & HMI/ SCADA program

· Developing and integration with MES or Database systems.

· Troubleshooting communications with MES or database.

· Troubleshooting electrical components & system control

· Prepare Machine I/O, flow chart, interface time chart, data allocation list, setup procedure and software code

· Documentation of machine operation manual for the project

· Liaise with the Customer, Design and Project Engineer for the software development and execution of the project

· Execute Engineering Change Notice (ECN) for change of software

· Maintain proper project documentation

· Provide training to End users and technicians.

· Adhere to all health and safety rules and procedures

Job Requirements:

· Min. Bachelor’s degree in Electrical Engineering/ Electronics/ Automation Control or equivalent

· Min. 5 years relevant experience in Automation project

· Experience in PLC programming & SCADA design is a must

· Knowledge of Mitsubishi, Allen-Bradley, SCADA (WinCC, Ignition)

· Knowledge of C++, C#, .NET is an added advantage

· Knowledge of robot programming is an added advantage

· Able to perform assigned task independently or through team activities

· Self- motivated, resourceful and organized

· Willing to travel overseas for assignments at short notice

· Good interpersonal communication skills

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Summary of the Job: (Primary function of the job)

· Produce complete control solution and Electrical design base on customer specification and
Sys-Mac standardized practice

· Integrate and interface of third-party equipment’s into electrical design.

Example barcode scanner, Robot controllers, motion controller, vision system etc

Job Responsibilities: (Key responsibilities of the job)

· Execute of circuit design according to international electrical standard

· Prepare circuit diagram for wiring execution

· Prepare Bill of Material (BOM), I/O List

· Initiate Purchase Request (PR) on order of electrical components to be used for the project

· Liaise with the Supplier, Customer, Design and Project Engineer for the electrical design and wiring execution of the project.

· Provide thorough testing of machine functionality to verify electrical wiring and safety completeness.

· Work with other members of the control department to continuously improve method of integrated control technology

· Prepare of Machine Operation Manual for the project.

· Execute Engineering Change Notice (ECN) for change of electrical design

· Maintain proper project documentation.

· Adhere to all health and safety rules and procedures

· Support in FAT / SAT tasks

Job Requirements

· Min Diploma in Electrical Engineering/Electronics/Automation Control or equivalent

· Min 3 years relevant experience in Automation project.

· Ability to design electrical circuit, perform electrical calculation

· Knowledge of Solidwork CAD will be an added advantage

· Experience in hand on wiring skill on panel or machine

· Knowledge of AutoCAD software will be an added advantage

· Able to perform assigned tasks independently or through team activities

· Self-motivated, highly resourceful and organized.

· Willing to travel overseas for assignments at short notice.

· Good interpersonal communication skills.

Responsibilities:

· Responsible to provide technical and engineering support and expertise advice to customers (both internal and external) on product / system selection, solutions and other applications knowledge.

· In-charge of new business venture for Green / Renewable Energy esp Hydrogen Refueling Station.

· Work with sales and project team to provide Customers with technical proposals / pre-sales, product demonstrations, technical solutions on product / system to offer.

· Understand the needs and requirements of product / system design improvement and innovation to capture business opportunities.

· Perform research and development to promote product / system innovation and development.

· Evaluate, handle and plan new product / system ideas.

· Identify and resolved solution application issues of Customers.

· Conduct necessary training / briefing to Customers or internal team.

· Other ad hoc duties assigned by Superior

Requirements :

· Minimum a Degree in Mechanical Engineering relevant.

· At least 2 years of relevant working experience in similar industry with hydraulics background is advantageous.

· Good knowledge of using AutoCAD and Solidworks.

· Good command of English.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

What You Will Do

• Support production line, SPC/FDC (statistical process control / fault detection classification) monitoring, perform process window study and provide improvement plan to improve process stability and performance.

• Lead Process CIP (continuous improvement projects) in Dept. to improve process robustness, cost and tool capacity thru –

• Develop and characterize new process recipes for new/existing technologies and NPI (New Product Introduction), meeting qualification and reliability requirements

• Improve process performance indices adopting big data analytic, statistical analysis and structured problem-solving methodologies

• Collaborate/work with cross functional teams, cross fabs and OEM suppliers for BKM (best known method) convergence on recipes, material, method, and I4.0 automation, and resolving complex integration issue

• Drive company's production ramp schedule by process qualification, productivity improvement and new tool release.

• Train, coach, and guide Engineers to support daily operational requirements and impart process knowledge, troubleshooting skills, risk assessment and decision making.

• Opportunities for job rotation and overseas assignment.

• Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.

What You Will Need

• MS/BS in Chemical Engineering, Electrical/Electronic Engineering, Mechanical Engineering, Materials Science Engineering, Chemistry & Physics with minimum 3 years of relevant experience.

• Diploma candidates with minimum 5 years of work experience in similar role.

• Demonstrated ability in structured problem solving and root cause analysis with solution development.

• Strong knowledge in SPC (Statistical Process Control), risk assessment, DOE (Design of Experiment) and 8D approaches.

• Experience in big data analysis and use of AI/ML, coding like python.

• Strong technical depth and having patents and papers publication is a plus.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations. 

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation. 

Roles & Responsibilities

· Assist Project Manager in managing and monitoring day-to-day projects operation

· Ensure proper taking over of in-coming projects from sales department

· Proper preparation (Cost Sheets, Cost-estimates etc) and documentation of individual project upon received work orders

· Manage multiple projects independently and to be familiar with system integration works

· Liaise with Clients, Contractors and Consultants from design stage, project execution to project handing over

· Attend to all project related queries and to check drawings to resolve discrepancies during design stage

· Responsible for stakeholder’s management which includes attending meetings, coordination discussion, shop drawing preparation, documentation submission and supervision works.

· Ensure proper planning & control of all project/order assigned with approved project schedule updated with events changes

· Preparation of Progressive Claim and other claim related documents to ensure smooth payment transaction between company and all other clients

· To coordinate and establish good relationship with all current and future suppliers for smooth project execution

· Other ad-hoc duties as assigned

Requirements

· Diploma and/or Degree in Mechanical Engineering or other Engineering discipline, project management, or equivalent

· Minimum 2 years and above Working in Singapore

· Local Graduate is welcomed.

· Good verbal and written communication skills

· Demonstrates good teamwork and resource management

· Knowledge in Waste Management and Pneumatic Waste Conveyance System will be an added advantage

Job Description

• Ensure stable operation of the game business and continuously optimize it;
• Responsible for analyzing and troubleshooting system, database, network, application and other faults and errors;
• Coordinate the related upstream and downstream related work;
• Formulate system security, backup, statistics, and inspection strategies;
• Participate in the compilation and arrangement of documents, manuals and processes;
• Optimize the server system parameters and formulate corresponding configuration specifications according to the specific modules of the business;
• Perform security management and control on online servers, including port opening management, vulnerability and patch management, and firewall management;
• Formulate server configuration and security baselines, and promote and supervise their implementation;
• Collect and analyze server logs, know the running status of the server at the earliest possible time, and provide data support for early detection and location of problems.

Job Requirements

• Bachelor degree in computer engineering or equivalent;
• Familiar with the operation and maintenance of Linux and Windows operating systems, and have the ability to quickly locate and solve problems;
• Familiar with network equipment;
• Familiar with the operation and maintenance process of online games, with experience in IDC management and large-scale maintenance and management of servers;
• Familiar with one of the development languages of shell and python;
• Familiar with Linux common open source software (such as mysql, nginx, redis, mongodb, zabbix, etc.), able to deploy and solve problems
• Familiar with sql server, vmware, kvm, docker and other virtualization is preferred;
• Proficiency in using cloud servers, such as AWS, aliyun, qcloud, etc.
• Experience in operation and maintenance in the game industry is preferred;
• Have good logical thinking ability and communication ability, good communication and expression ability, strong sense of responsibility and learning acceptance ability, good at thinking, brave to accept challenging work and be able to respond to the tasks arranged by the company in a timely manner;

Job Description

• Ensure stable operation of the game business and continuously optimize it;
• Responsible for analyzing and troubleshooting system, database, network, application and other faults and errors;
• Coordinate the related upstream and downstream related work;
• Formulate system security, backup, statistics, and inspection strategies;
• Participate in the compilation and arrangement of documents, manuals and processes;
• Optimize the server system parameters and formulate corresponding configuration specifications according to the specific modules of the business;
• Perform security management and control on online servers, including port opening management, vulnerability and patch management, and firewall management;
• Formulate server configuration and security baselines, and promote and supervise their implementation;
• Collect and analyze server logs, know the running status of the server at the earliest possible time, and provide data support for early detection and location of problems.

Job Requirements

• Bachelor degree in computer engineering or equivalent;
• Familiar with the operation and maintenance of Linux and Windows operating systems, and have the ability to quickly locate and solve problems;
• Familiar with network equipment;
• Familiar with the operation and maintenance process of online games, with experience in IDC management and large-scale maintenance and management of servers;
• Familiar with one of the development languages of shell and python;
• Familiar with Linux common open source software (such as mysql, nginx, redis, mongodb, zabbix, etc.), able to deploy and solve problems
• Familiar with sql server, vmware, kvm, docker and other virtualization is preferred;
• Proficiency in using cloud servers, such as AWS, aliyun, qcloud, etc.
• Experience in operation and maintenance in the game industry is preferred;
• Have good logical thinking ability and communication ability, good communication and expression ability, strong sense of responsibility and learning acceptance ability, good at thinking, brave to accept challenging work and be able to respond to the tasks arranged by the company in a timely manner;

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job Description

SEPPURE is a separation technology company developing novel membrane materials and membrane processes for sustainable chemical separations without the use of heat. SEPPURE is disrupting the energy-intensive chemical separation processes, such as distillation and evaporation, through the introduction of novel chemical-resistant nanofiltration membranes. With up to 15% of the world’s total energy spent on industrial-scale chemical separations, SEPPURE’s sustainable process facilitates decarbonisation by substantially reducing global energy use, emissions, and pollution.

We have an opportunity for Senior Engineer at our R&D centre based in Singapore.

Roles and Responsibilities

The applicant will be assigned to Engineering Team and will be involved in R&D projects in a laboratory environment and semi-industrial field piloting. The applicant will

· Develop Basic Engineering Package and/or Front End Engineering Design (FEED) packages

· Develop specification and data sheet for skid, unit operation, and integration with plant.

· Process and sizing calculation to meet design requirement.

· Develop control philosophy, safety interlock, and quality control.

· Develop technical specification and RFQ to support equipment procurement.

· Able to lead on FAT, installation, and commissioning of equipment by working closely with customer, contractor, and equipment fabricator.

· Work closely with operation team to develop SOP and safety protocol on site.

· Prepare project costing, proposal, and report.

Requirements and Qualifications

· B.Sc., M.S. or equivalent experience in chemical engineering, environmental engineering, or related field.

· Min 3 years of knowledge and experience in chemical industries and/or separation technologies

· Able to handle chemicals, perform HAZOP analysis, and with strong safety awareness.

· Ability to work on design, RFQ, equipment fabrication and site integration.

· Good knowledge of complex problem-solving and project management.

· Techno-economic calculation and analysis.

· Strong communication skills and report writing.

· Able to work independently (self-driven) and within a team environment.

· Creative, resourceful, and efficient in managing and executing multiple projects.

· Prior experience in managing piloting site or solvent treatment processes is a plus.

• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Duties and Responsibilities

· Provide remote and on-site IT infrastructure, hardware and application support

· Provide 1st and 2nd level IT support when technical issues are escalated

· Support and manage servers, ERP, POS and e-commerce systems

· Troubleshoot and resolve network infrastructure and server-related issues

· Responsible for managing backups and restores

· Identify and recommend hardware, software and/or service opportunities including replacement, upgrading, development, training, reviewing business processes to meet the Company’s standards and requirements

· Maintain IT hardware and software inventory list

· Maintain IT training curriculums and documentation

· Document procedures and vendor management

· Plan and evaluate IT-related requests from other departments

· Participate and execute IT projects which involve liaising with vendors, working collaboratively with users using the best development and implementation methodologies

· Perform any other duties as assigned

Requirements

· Minimum Degree in Computer Engineering, Computer Science, Information Technology or IT related disciplines with at least 5 years’ experience

· Knowledge and working experience in supporting e-commerce, POS (Point-Of-Sales) system and ERP application (Microsoft Dynamic NAV or Dynamics 365 Business Central)

· Knowledge in networking support, Microsoft Windows Server OS support and administration

· Knowledge in supporting robotic process automation software and reports development will be a plus

· Possess good knowledge on 1st and 2nd level troubleshooting skills, ability to support end user remotely, good communication skills and must be able to work independently

· Able to work and be on stand-by after working hours, on weekends and public holidays

· Strong project management, problem-solving and diagnostic skills

· Self-driven and highly independent