Job Scope:

• Design and develop new products from concept to production
• Collaborate with cross-functional teams, including R&D, manufacturing, and marketing
• Conduct product testing and validation to ensure compliance with specifications and standards
• Analyze market trends and customer feedback to inform product improvements
• Create and maintain technical documentation, including specifications and manuals
• Support the manufacturing process by providing technical guidance and troubleshooting
• Participate in product lifecycle management, including updates and phase-out strategies
• Conduct cost analysis and optimize product designs for manufacturability
• Work closely with suppliers and vendors to ensure quality materials and components
• Assist in training sales and support teams on product features and benefits

Requirements:

• Degree or Diploma in Mechanical or Mechatronics Engineering
• Over 3 years of experience in setting up automation equipment
• Strong knowledge of electromechatronic systems
• Good problem-solving and analytical skills
• Ability to work independently and communicate effectively at all levels
• Team player with a high level of motivation
• Willingness to travel overseas for field support as needed
• Prepared to work overtime when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Job description:

• Managing project and dealing with labour, materials, & equipment
• Lowering wastage of material/equipment/ resources
• Liaise with subcontractors and performing project management to ensure that project progresses according to schedule and to take the appropriate corrective action when deviations arise.
• Coordinating with all related stakeholders to ensure project delivered on time
• Handling administration of contract, claims, disputes, variation and final accounts.
• Project planning & material requisition
• Project engineer experience
• Diploma/degree in engineering related course

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Our Client:

• IT Industry
• Aljunied
• Mon – Fri, 9am – 6pm
• UP $6,000 Basic + Commission + Phone Allowance

Job Description:

• Address technical business needs of partners and end users through presales support, including:

1. Presentations
2. Demos
3. Proof of Concept (POC)
4. Proposal writing
5. Compliance tables
6. Statements of Work (SOW)
7. Training/Product enablement

• Gain proficiency and certifications in assigned products through self-directed and formal training.
• Conduct independent hands-on POCs.
• Present vendor solutions to partners and end users.
• Provide updates and training to partners and end users as needed.
• Work closely with product managers and channel account managers to close opportunities.
• Ensure timely and accurate reporting.

Requirements:

• Min. Diploma in Information Technology or equivalent.
• Min 2 years of hands-on working experience in Cybersecurity Domain.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Deidrie Chiam Rui-Xuan | EA Reg No: R23116361

RS Recruitment Agency LLP | EA Lic No: 17C8809

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Job Description

• Design and perform calculations for mechanical engineering works, including HVAC, fire protection systems, and plumbing and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Prepare comprehensive study reports, design reports, technical notes, and public consultation papers
• Develop detailed tender documents and technical specifications for projects
• Evaluate tenders and prepare thorough tender assessment reports
• Collaborate with cross-functional teams to ensure project success and timely delivery
• Provide support in project management and contract administration for building engineering contracts
• Stay up-to-date with industry trends, technologies, and best practices to drive innovation in mechanical engineering solutions
• Ensure compliance with local building codes and regulations in Singapore

Requirements

• Bachelor's Degree in Mechanical Engineering from an accredited institution
• Minimum of 5 years of hands-on design experience in building and/or infrastructure projects
• Proficiency in CAD software, such as AutoCAD and SolidWorks
• Strong knowledge of industry standards, regulations, and local building codes in Singapore
• Excellent project management and technical skills
• Proven ability to work independently with minimal supervision and as part of a collaborative team
• Outstanding problem-solving and analytical skills
• Strong attention to detail and organizational abilities
• Excellent written and verbal communication skills
• Ability to manage multiple projects efficiently and meet deadlines
• Familiarity with sustainable design principles and energy-efficient systems is a plus

You will drive R&D initiatives to make our autonomous vehicles operate at superhuman capabilities for comfortable, safe driving. On a daily basis, you will:

• Define and influence the direction of the team, organization, and/or department
• Advise leaders on technology problems and solutions
• Connect and drive business impact through technology solutions
• Formulate problems, architect solutions, and design processes
• Prototype, evaluate, implement, and iterate on solutions
• Pioneer research into state of the art solutions and systems for autonomous vehicles
• Productionize and deploy solutions onto autonomous vehicle fleets
• Mentor and grow junior and experienced engineers and researchers
• Help create and reinforce a culture of inclusion, innovation, and excellence

What We’re Looking For:

• Masters or PhD in Machine Learning, Computer Science, Applied Mathematics, Statistics, Physics or a related field; or equivalent industry experience
• In-depth understanding of common Machine Learning and Deep Learning algorithms
• Experience designing, training, and analyzing neural networks for at least one of the following applications: object detection, semantic/instance segmentation, visual classification, motion/gesture recognition, sensor fusion, multitask learning, motion prediction, and/or multi-object tracking
• Effectiveness at leading and executing large, complex technical initiatives
• Strong track record of tackling ambiguous problems, creating clarity from it, and driving it to successful outcomes
• Advanced knowledge of software engineering principles including software design, source control management, build processes, code reviews, testing methods
• Fluency in Python, including standard scientific computing libraries and Python bindings development experience
• Experience with PyTorch or other deep learning frameworks
• Experience working with large data sets and deriving insights from data
• Experience mentoring and leading others

Requirements:

-Higher Nitec / Diploma In Electrical & Electronics Engineering

-3-4 Years of Working Experience In Security Software Industry / Electronic Software Industry.

-( At Times Need to Handle Heavy Hardware Equipment )

-Stand-By Duty is Required

-Mobile / Transport / Stand By Claims Provided

Duties

-Handling of Measurement and Detection Equipment for Military & Homeland Security.

-Perform Regular Maintenance and Carry Out Diagnostic Analysis for Trouble Shooting and Repair Work.

-Strong I.T. Software Installation and Configuration Skills.

5-day work week

Location: Jurong area

Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Act as the main technical adviser on a construction site for subcontractors, craftspeople, and operatives & junior Engineers.

· Responsible for checking/advise of plans, drawings, and quantities for accuracy of calculations of area are followed correctly.

· Responsible to ensure that all materials used, and work performed are in accordance with the specifications & budget.

· Responsible for work progress timescales. (In charge area)

· Supervising of project crews.

· Coordination with consultant traffic team for timely submission and obtaining approval of temporary and permanent traffic diversion plan.

· Coordination work with authorities, clients and QP.

· Coordination with LTA term contractors (traffic light and street lighting).

· Ensure safety, health & security of the in-charge area.

· Assist in preparation of Approve-In-Principle (AIP), Preliminary, pre-final and final submission drawings with consultant for LTA, NPARKS, PUB and BCA submissions.

· Attending and preparing minutes for meeting with clients, consultant and technical agencies such as NPARKS, PUB, HDB, URA and etc

· Liaise and coordinate with interfacing contractors on traffic diversion matters.

· Assist in planning and execution of works

· Review method statement for various construction works and traffic diversion and traffic control plan for submission to LTA.

· Take part in briefing with sub-contractors on the technical

· Deal with arborist on site works to meet NPARKS requirement

Qualifications and Education Requirements

· Minimum 10 years of working experience in road alignment design and traffic engineering after tertiary education. Shall be well versed and have experience in LTA’s design standards.

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

• Admiralty
• 5.5 work days
• Mon- Fri -8am- 5pm
• Sat - 8am - 12pm
• Vehicle provided
• Require class 3 license
• Training provided for candidates whom is interested in this field.

Job Description:

• Assist with the development of the preventive maintenance plan.
• Comply with Workplace Safety and Health (WSH) policies
• Plan the implementation of projects
• Propose workflow improvements to improve efficiency.
• Upkeep and meet schedules dateline as coordinated with our clients.
• Build rapport and confidence with our clients while maintaining quality of work.
• Constantly seek solutions or improvements to reduce expenses for all teams and work.
• Supervise the work of workers
• Perform other ad hoc duties as assigned by superior.

Requirements:

• Willing to learn
• Strong communication skills and ability to effectively interact with clients and project teams.
• Class 3 license
• Singaporean only

email - [email protected]

EA Personnel Name: Lucas Chang
EA Personnel No: R1874043
EA License No: 18C9495

This role requires highly cross functional interactions with key site functions to ensure success in production and release performance. Individual must be able to effectively communicate and collaborate closely with the team members and various SME to ensure equipment are operational to sustain daily operations, resolve operation challenges and implement effective measures to address the challenges to ensure without compromising on safety and compliance.

Location: Tuas

Salary up to $10000

1 Year Contract

Design & Project Engineering:

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule.
• Lead F&E to participate in technical transfer activities and cross-functional meetings.
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints.
• Effectively manage and work with project CQV team to ensure timely delivery of projects.
• Prompt updates or escalation of issues and challenges
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment.
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design.
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo.
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications.
• Work with project managers to complete design and engineering projects within schedule, budget and quality constraints.
• Develop technical solutions to complex problems requiring the regular use of ingenuity and creativity.

Daily Operations

• Accountability and ownership of assigned equipment
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Effectively communicate and collaborate with cross function stakeholders to address operational challenges and concerns to ensure sustained operation and minimal interruptions to operations activities.
• Lead and participate in equipment breakdown investigations to identify root causes. Effectively communicate to the customers on the subsequent plans, short term, and long-term mitigating actions.
• Collaborate closely with cross functional SME to implement effective corrective, preventive action and improvements to eliminate or mitigate future recurrence.
• Ensure operation continuity through asset lifecycle management planning, assess and identify impact to safety, compliance, operational schedule and cost.
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state.
• Accountable for deviation/change control associated to process equipment performance.
• Responsible for investigation of deviations, development of corrective and preventive actions
• and implementation of change controls in a timely manner.
• Support equipment readiness initiatives for New Product Introduction or Product Campaign Changeover
• Responsible for operation and reliability of Biotechnology process equipment and/or single use systems assigned.
• Apply process equipment knowledge to perform troubleshooting of equipment failures/malfunctions and the development of technical assessments during normal working hours and after hours when required.
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo.
• Apply knowledge of Operational Excellence practices such as lean maintenance to drive continuous improvement.
• Responsible for completion of process equipment periodic review, data integrity assessment and security assessment in a timely manner
• Collect, organize, analyze and present results for operational issues or engineering projects of various scale and complexity.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Procurement Engineer

• Industry: Marine
• Remuneration: $2400 - $4200 (Depending on experience)
• Working Hours: Monday to Friday; 8.30am – 5.30pm
• Location: Tuas (2 Way Transport provided at Marsling and Jurong East MRT)
  Nearest MRT: Tuas Crescent

Job Responsibilities:

• Source new suppliers for materials and services, expanding the supplier base for current and future needs.
• Obtain competitive quotes and drive cost-reduction initiatives.
• Lead price negotiations to ensure cost competitiveness.
• Conduct supplier qualifications and add approved suppliers to the vendor list.
• Regularly review supplier performance to maintain quality and reliability.
• Maintain procurement SOPs for consistent workflows
• Collaborate with departments to ensure supply continuity with minimal inventory.
• Negotiate favorable supply agreements.
• Provide quotations to the Sales department for standard and custom products.
• Perform other tasks and projects as assigned by management.

Job Requirements:

• Minimum Diploma in Mechanical Engineer will be preferred
• Proficient in Microsoft Word and Excel
• Knowledge in components sourcing and fabrication parts will be advantageous

Interested applicants please send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be contacted by our consultants.

Align Recruitment Pte Ltd (20C0253)
Rei Lai Yu Wen (R2199207)

Our client provides products and solutions to hospitals in Singapore.

• Develop and execute validation protocols for washers and sterilizers used in hospital settings.
• Support regulatory submissions and inspections, providing necessary documentation and evidence of compliance.
• Ensure documentation is complete, accurate, and audit-ready.

Requirements:

• Degree in Biomedical Engineering
• At least 2 years experience testing Central Sterile Supply Departments and/or water treatment systems.
• Excellent analytical, problem-solving, and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun
Location: Tuas
Contract Duration: 1year
Salary: Up to 6K

Job Description:

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensure the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes and equipment.
• Communicate on a regular basis to the plant personnel on process updates.
• Train the process technicians and fellow process engineers on the process and procedures as required.

Requirements

• Min Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry
• Has min 2 years of experience
• Demonstrated ability to provide technical solutions for complex problems through equipment and process understanding
• Working knowledge of Regulations, and Good Manufacturing Practices (GMP)
• Proactive, has experience with high performance teams, strong interpersonal and project management skills

If interested, please email your resume to [email protected]
➖
Alex Goh Hock Leong
(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Working hour – Monday to Friday (8am-5pm)

Location: Gul Circle

Up to 4K

Jobscope:

• Develop detailed designs for test jigs, frame and structures.
• Use computer-aided design (CAD) software and finite element analysis (FEA) to simulate and analyze designs.
• Ensure designs meet safety codes, standards, and regulations.
• Conduct site surveys and investigations to assess conditions.
• Collaborate with engineers and client to understand the requirements.
• Recommend appropriate construction techniques and materials.
• Calculate the loads, stresses, and forces that structures will encounter (e.g., gravity,
• Perform load-bearing and stability analysis to determine if the structure can withstand these forces.
• Work closely with client and colleagues to coordinate projects.
• Provide guidance and ensure adherence to schedules and quality standards.
• Conduct risk assessments and implement measures to mitigate potential risks.

Requirement

• Min. Bachelor’s degree in Civil Engineering / Structural Engineering or a related field.
• Proficiency in CAD software and FEA tools.
• Strong understanding of safety codes, standards, and regulations.
• training will be provided.

If interested, please email your resume to [email protected] or telegram me @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing QA/QC inspections to meet with construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendors
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub-contractors.

Other information

• *M&E Engineer, preferable recognized degree in Mech/Elec engineering
• *M&E Coordinator, diploma/specialist diploma in M&E coordination
• Min 2-3 years of experience in coordinating and supervising M&E services and/or building-related projects
• Working schedule: Full 6 days work week for the first 6 months employment (Mondays to Saturdays, 8am-6pm), after that will be 5.5 days work week (Mondays to Fridays, 8am-6pm & Saturdays, 8am-12pm)
• Proficiency in BIM and AUTOCAD will be added advantage

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

What a System Test Planning and Automation Engineer (Fresh Graduate) does at HP:

Lead Continuous Ecosystem Validation:

• Develop and implement automated test cases for New Product Introduction (NPI) and Regular Product Introduction (RPI) programs.
• Ensure compatibility with HP and third-party solutions through continuous testing.

Develop and Enhance Automated Tests:

• Lead the development and enhancement of automation using tools such as GFriend and Testrail.
• Collaborate with firmware engineers (and other test partners) on test automation.

Develop and Maintain Dashboards and Automation Tools:

• Develop and maintain dashboards and automation tools in preparation for new laser printer programs.
• Monitor and assess the performance and effectiveness of automation solutions.

Design and Deploy Automation Solutions:

• Design, develop, and deploy automation solutions for various systems and processes.
• Troubleshoot and document automation systems, providing support to stakeholders.
• Collaborate with management, internal, and outsourced testing and development partners.

Automate Testing Processes:

• Automate testing processes using appropriate databases, tools and frameworks to improve efficiency and repeatability.
• Experience in setting up test benches

Monitor Standards and Performance:

• Monitor and enforce adherence to established coding standards, design guidelines, and best practices.
• Monitor software performance and conduct load and stress testing to identify bottlenecks and performance issues.

Leverage AI and Machine Learning:

• Apply AI and machine learning techniques to optimize testing processes and improve product quality.
• Develop predictive models to identify potential defects and areas for improvement.

Documentation:

• Prepare and maintain test-related documentation, including test automation architecture and design. plans, test matrices, and testing reports.

Collaboration and Project Participation:

• Develop understanding and relationships with internal and outsourced partners on test design and automation.
• Participate as a member of project teams to develop reliable, cost-effective, and high-quality solutions for laser printers.
• Support priority test automation projects with direction, maintaining relationships with internal stakeholders and sharing information via standardized reports and regular stand-up meetings.

Individuals who do well in this role at HP, usually possess:

• Four-year Degree in Computer Science, Software Engineering, Information Systems, Information Technology, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in software quality assurance, test harnesses and QA focused tools, or a related field.
• Good to have skills and knowledge: Agile Methodology, Application Programming Interface (API), Test Automation, CI/CD, Computer Science, Debugging, JIRA, Python (Programming Language), Scripting, Scrum (Software Development), Software Development, Software Engineering, Software Testing, SQL (Programming Language), Test Automation, Database Management.
• Any certifications are a plus: Project Management Professional (PMP) Certification, Lean Six Sigma Certification or equivalent quality certifications, Certified Quality Engineer (CQE), Certified Software Quality Engineer (CSQE), Certified Software Quality Engineer, Certified Associate in Software Quality (CASQ), Certified Software Test Engineer (CSTE).

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

IT Support Engineer

Salary Range: $4000 - $4500
Working Days: 5 Days Mon-Fri 8.30AM-6.00PM
Location: Siglap

Job Summary

• Provide 1st and 2nd Level IT Support to end-users
• Manage IT assets through procurement, tracking, maintenance, refresh/renewal and disposal/ termination.
• Provide assistance in the implementation of new end-user computing technologies

Responsibilities:

• Provide 1st and 2nd Level IT Support to end-users
• Provide end-user IT support for both local and remote locations daily to ensure smooth business operation including end-user computing device performance monitoring
• Perform installation, configuration and maintenance of computers, workstations, applications and other related equipment and devices
• Perform IT asset lifecycle management including tech refresh, preventive maintenance (Eg. Laptops / Printers) and software license monitoring
• Responsible for the procurement of IT equipment, software and related products including administering procurement processes and supporting in requirements scoping and evaluation
• Manage IT vendors (service quality, feedback, improvements) and service contracts
• Provide assistance in the implementation of new end-user computing technologies
• Any other IT duties as assigned

Requirements:

• Recognized Diploma or Degree in Information Technology or equivalent
• Minimum 3 years of experience in providing IT support to end- user community
• Experienced in troubleshooting IT issues at L1/L2 support levels and escalating to higher levels of IT support

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

The A*STAR Institute for Human Development and Potential (A*STAR IHDP) focuses on research that aims to improve and impact the health and well-being of Singaporeans across the life course.

Job Description:
We are seeking for a highly motivated individual to take on the functional role that combines software engineering and Generative AI for data discovery and analytics environment building for strategic research datasets.

Job Responsibilities:

• Develop an interactive shopping cart from the metadata of strategic research datasets such as the Integrative Adolescence Research Programme (IARP).
• Develop and integrate a Generative AI assistant for question-answering capability of metadata and data visualisations.
• Implement an analytics environment, integrating of Qualtrics API event trigger and data lakehouse for research data analyses.

Job Requirements:

• A Bachelor/Master Degree in Public Health, Data Science, Statistics, Computer Science, Artificial Intelligence or related field.
• Good programming skills (React JS, Python).
• Experience with cloud-based Generative AI frameworks (Azure OpenAI, Azure AI Studio, Amazon Bedrock).
• Experience with multi-cloud data lakehouse implementations (Azure, AWS).
• Good team player and communication skills for collaborative research.
• 0 to 5 years' experience

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Other adhoc duties as assigned

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

- Location: Bedok

- 5days work

- Basic + AWS + VB

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.

Requirement:

• Diploma/ Degree in Electrical/ Electronics Engineering or related discipline
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)