• Generate service and spare parts quotations based on customer inquiries and needs.
• Carry out service tasks, including performing repairs and commissioning of gas and water quality analyzers, CEMS, and AQMS both in-house and at customer locations.
• Troubleshoot and offer recommendations for analyzer issues, ensuring solutions comply with company's standard procedures and safety regulations.
• Build and maintain positive relationships with customers, providing them with ongoing technical and service support.
• Collaborate with customers to address service-related concerns and offer tailored technical solutions.
• Assist the project team in executing Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for projects.
• Identify new opportunities to expand preventive maintenance and service contract offerings.
• Provide training on product usage and features to end users and distributors.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Responsibilities:

• Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.
• Support software/hardware modification pertaining to the site Automation systems.
• Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.
• Support field troubleshooting with other internal Stakeholders.
• Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.
• Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.
• Support other technical changes and duties such as On Call/Shift duty as required
• Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable Frequency (VFD) commissioning/modification and validation

Requirements:

• Minimum 3 years’ experience working with bio manufacturing projects
• Knowledge/Proficient in DeltaV is a must.
• Knowledge of site GMP quality requirement will be a plus
• Knowledge of upstream manufacturing will be a plus
• Pharmaceutical related experience preferred
• Must be team player, self-starter, curious with strong analytical and organizational skills
• Experience in upstream / downstream / Central services process operation will be a plus
• Experience in equipment design for process equipment will be an advantage.
• Experience in driving stainless steel equipment projects is a plus.

Based in Tuas.

1 year contract. Option to extend/annual renewal depending on performance

Our client is a leading manufacturing company. They are looking for a Senior System Software Engineer to upport the next phrase of their business. They are located at East of Singapore– easily accessible. The Senior System Software Engineer is responsible for:

Duties

• Design and develop the software architecture for company instrument systems.
• Collaborate closely with the hardware engineering team to analyze system requirements, ensuring functionality, performance, and reliability are achieved.
• Define and document software requirements, architecture, design, and test plans to align with system goals.
• Implement and test system software, addressing issues until resolved to meet customer expectations.
• Ensure timely delivery by aligning software development with project schedules and requirements.

Requirements

• Min Bachelor or Master’s degree in Computer Engineering, Computer Science or similar field.
• Solid knowledge and extensive working experience in low level communication protocol, motion control, device drivers and firmware will be preferred
• Solid programming skills in C/C++/C#
• At least 3 years of experience with system/architecture development on an equipment system.
  

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

Basic: $2,400 - $2,800
Working Hours: 5 Days Mon-Fri (830am to 530pm)
Location: Jalan Kilang Timor, Redhill (Office) / Current project - Jurong or Woodlands Area

Responsibilities

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Documentation on project progress and damage;
• Any other related duties as assigned.

Requirement

• Diploma in Mechanical Engineering or related field.
• Training provided.
• Willing to work in Engineering/Construction environment.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Software Engineer (Semiconductor Equipment Products)
5 days
9am-6pm
Kallang
$4000-$5000

Responsibilities:

• Software development and implementation for high speed automated equipment
• Software design, coding, testing, debugging and validating
• Evaluating and establishing system performance and specifications
• Provide software technical support to a team of field service engineers
• Software maintenance of existing equipment

Requirements:

• Degree in any Engineering discipline with minimum 3 years of experience in software development in the automation / semiconductor industry
• Must have experience in vision inspection equipments
• Strong programming skills in C / C++
• Must have good hands-on experience in programming multi-threaded windows application using Visual C++
• Good knowledge of electronic components, motion control and interfacing with inspection systems
• Strong Mathematical and Algorithmic development skills
• Able to travel overseas for field support when required
• Must be prepared to work overtime when necessary

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in electrical engineering
• 2-6 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a Electrical and Instrument Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of Electrical and Instrument Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 5 years’ E&I experience in water treatment industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for a Manufacturing and Production Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Offer continuous technical support to contract manufacturers, resolving electronic engineering issues encountered during production.
• Work closely with manufacturers to establish and uphold rigorous quality control standards, ensuring reliable and consistent product performance.
• Analyze manufacturing workflows to identify and implement process improvements that boost efficiency and productivity.
• Address and resolve electronic engineering challenges to prevent production delays and minimize defects.
• Collaborate with design and development teams to implement design enhancements that improve product quality and streamline manufacturability.
• Coordinate investment audits with cross-functional teams, conduct regular physical asset inspections, and assist with annual inventory checks as needed.
• Any ad-hoc duty as given

Requirement

• Min Bachelor's degree in Electronic Engineer or a related field
• Min 4 years in EMS - Electronic device assembly
• Good understanding in overall supply chain, manufacturing technology, process set-up, process validation and SOP support
• Knowledge and experience in manufacturing, planning, quality, SAP, PLM
• Knowledge and experience in wearable electrical device's assembling
• Comfortable to travel overseas often

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

• Supply Chain Management / Procurement Exp
• Maintenance Industry / Electrical Spare Parts Exp
• Degree in Supply Chain / Business

Job Scope:

• Responsible for sourcing for direct / indirect materials, dealing with vendors and negotiating for the best price and payment term from local / overseas vendors
• Collaborate and maintain good working relationship with stakeholders and vendors, for planning and initiation of necessary procurement
• Liaison with vendors for timely delivery and monitor all purchases to avoid any shortages, overcharges and defects of materials
• Resolve supply, quality, service and invoicing issues with stakeholders, vendors and identify process bottleneck, propose and implement solutions to resolve issues in a timely manner
• Assist to implement internal procurement strategies
• Prepare, develop and review department contracts for new and existing supplier, and constantly monitoring the validity and expiry of each contract
• Prepare and develop various documentations (e.g. Tender, SOPs, Work Instruction, Reports, etc.) and monitor the validity & expiry of each documentation
• Assist as the System Administrator for section’s Maintenance Management System (MMS)
• Monitor and track Asset Life Cycle for planning of asset renewal and/or disposal
• Support Budgetary Planning and Costing
• Any other duties as assigned

Requirements:

• Possess a Degree in Business Admin / Supply Chain is preferred
• Possess 1 – 3 years of relevant working experience in Asset Management / Supply Chain Management / Procurement
• No experience are welcome and training will be provided
• Prior experience from equipment maintenance industry or with experience in electrical spare parts is advantageous
• Hands-on experience on Enterprise Resource Planning (ERP) Systems (e.g. ServiceNow, SAP, Maximo, Oracle) is advantageous
• Able to work well independently and in a team under a challenging and fast-paced environment

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

Job Summary:
We are seeking an experienced OpenShift Resident Engineer with a strong background in OpenShift Container Platform (OCP). The ideal candidate will have a minimum of 3-4 years of relevant experience, including at least 1 year managing and optimizing OpenShift environments. This role involves designing, implementing, and maintaining OpenShift platforms, ensuring the high availability, scalability, and security of containerized applications.

Key Responsibilities:

• OpenShift Platform Management:
  Design, deploy, and maintain OpenShift environments in line with industry standards and business objectives.
• Troubleshooting & Support:
  Diagnose and resolve platform issues while ensuring minimal downtime.
• Collaboration & Optimization:
  Work closely with development and operations teams to enhance containerized application performance.
• CI/CD Implementation:
  Develop and maintain continuous integration and delivery (CI/CD) pipelines.
• Security & Compliance:
  Ensure platform security, compliance, and best practices are followed.
• Documentation & Reporting:
  Maintain detailed documentation of platform configurations, processes, and procedures.

Essential Qualifications:

• Experience:
  Minimum of 3-4 years working with OpenShift Container Platform.
  At least 1 year managing OpenShift environments.
• Technical Skills:
  Proficiency in containerization technologies such as Kubernetes and Docker.
  Hands-on experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
  Strong troubleshooting and problem-solving skills.
• Soft Skills:
  Excellent communication and collaboration skills.
  Ability to work in a fast-paced, team-oriented environment.

Desirable Qualifications:

• Certifications:
  OpenShift certification or other related credentials.
• Cloud & Automation Tools:
  Experience with cloud platforms like AWS, Azure, or GCP.
  Familiarity with Infrastructure-as-Code (IaC) tools such as Terraform and Ansible.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

RESPONSIBILITIES

• Organise, coordinate, control and carry out the work assigned related to project(s).
• Review incoming client document from technical consideration and make require summaries/ key points for agreeing on strategy for execution with Project Director and decide requirement of resources including external resources.
• Monitor planning and progress of work.
• Monitor the issue of technical documents by establishing and updating the Document List.
• Provide all information to the Project Director related to organisation, planning, progress and reporting on activities assigned.
• Coordinate the work being done by outside agencies
• Perform specified technical tasks with reference to identified requirements.
• Be familiar with applicable codes, standards, specifications and regulations.
• Make project execution plans and other project related documents including project schedules.
• Review and control the work performed by the discipline team.
• Establish transmittals for issue of documents including distribution list to outside parties and internally within the organisation.
• Review new requirements and inform on their consequences.
• Identify design changes, report them and update the documentation.
• Handle internal and external interfaces.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Bachelor's degree in Engineering major in Mechanical, specializing in project material engineering, petrochemical and plant design and construction.
• At least 15 years of working experiences in engineering company.
• At least 4 years working experiences in FPSO and Offshore project management, engineering and construction execution and management
• Working experiences as engineer or project control in design office and construction yard such as module fabrication shop or shipyard and integration of topside modules to hull.
• Strong engineering knowledge of Topside engineering including module, piping and equipment layout design, material design, and procurement in FPSO Project, working knowledge with NORSOK, DNV, ASME, ASTM, MSS, working knowledge or experience in support design, and insulation design.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration and interface coordination between Joint Venture, Consortium set-up and inter-discipline engineering and inter-contractor activities with proactive mind.

Title: Azure Cloud Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

This role will focus on designing, building, and maintaining scalable cloud-based data solutions, leveraging Azure services to drive business insights and optimize data workflows.

Key Responsibilities

• Design, deploy, and manage cloud-based data solutions on the Azure platform.
• Build and optimize data pipelines, data lakes, and ETL processes using Azure Data Factory, Databricks, and Synapse Analytics.
• Collaborate with cross-functional teams to ensure seamless integration of data across multiple sources.
• Develop secure and scalable cloud solutions, adhering to best practices and compliance standards.
• Implement data governance, monitoring, and quality assurance practices within Azure environments.
• Troubleshoot and resolve issues in cloud and data pipelines to ensure high availability and performance.

Required Skills and Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.
• Strong experience with Azure services, including Azure Data Factory, Databricks, Synapse Analytics, Azure Storage, and Azure Functions.
• Expertise in data engineering, including ETL/ELT processes, data modeling, and managing structured/unstructured data.
• Proficiency in programming languages such as Python, Scala, or SQL.
• Hands-on experience with big data tools such as Apache Spark, Kafka, or Hadoop.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Responsibilities:

• Serve as the first point of contact for seeking technical assistance, over the phone, remote connection software, chat, and email
• Perform remote troubleshooting through diagnostic techniques and pertinent questions
• Determine the best solution based on the issue and details
• Walk through the problem-solving process
• Direct unresolved issues to the next level of support personnel
• Provide accurate information on IT products or services
• Record events and problems and their resolution in internal ticketing systems.

Requirement:

• Minimum Bachelor's degree is required.
• Technical support professional with 3 years’ experience in the IT technical support / Desktop Support focused on end-user support
• Good experience in support and troubleshooting Windows and Mac OS including mobile devices (iOS and Android mobile operating systems)
• Ability to diagnose and resolve basic to moderately complex end-user technical issues
• Experience with setup and configuration of end-user desktop and laptop computer hardware, software, phones and peripherals.Technical Support / Desktop Support Engineer.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394

EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.