Job Descriptions:

* Familiar with analytical systems such as O2, Ammonia, pH, TOC, TRC, Conductivity and etc Analyzer, and instruments (PIT, TIT, FIT, etc)

* Coordinate with internal team, vendors, and contractors to ensure smooth project execution.

* Supervise and lead Installation and Commissioning and initial calibration of various Analyzer, instruments, sensors, etc. Troubleshoot and resolve any technical issues that arise during installation and commissioning.

* Perform Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)

* Perform site commissioning for instrumentation & Control System, analytical systems and project-related jobs

* Carry out preventive maintenance and corrective maintenance of analytics systems services

* Ensure all documentation is accurate and up-to-date, technical documents, not limited to installation report, testing and commissioning report, etc

* Ensure all installations & commissioning meet customer specifications and industry standards.

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)

* Strong analytical & troubleshooting skills

* Preferably 3 - 5 years of working experience or more in the analytical instruments or related field.

* Knowledge of analyzers, instrumentation would be advantageous.

* Able to work independently and write effective good service report

* Good work experience with Hart communicator, calibration, and PLC/SCADA would be advantageous

* Good planning and time management skills to achieve job efficiency.

* Customer orientated with a positive attitude

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description

* Perform software development and/or Cloud / Virtual / Computer programming with Systems Development Life Cycle (SDLC) methodology

* Implemenmt Cloud Management, Cloud programming, Enterprise Server / Network / Cybersecurity Architecture and databases.

* Develop technical specifications, design, coding, data security, implementation, integration, support, documentation and user guide.

* Experience in Data Analysis and Data Integration

* Handle Design and deliver end-user training and training materials

* Install, configure, troubleshoot and administration of Cybersecurity / System infrastructure/ networking / Windows servers / Disk storage / Cloud Management.

* Provide technical support and management for Server and / or Cloud Application

* Integration & Engineering services

Job Requirements:

* Diploma or Degree in Computer Science, IT or Computer Engineering

* 1-2 Years of similar working experience, Fresh graduate are welcome

* Hands on experience in developing full stack applications in Cloud Computing (AWS, Azure, etc), Cloud Management, Web Application, Computer Application, Process Control Application using, JAVA, NoteJS, Python, etc

* Good technical skills in Database Design, Windows Server, Cloud Application Management;

* Cybersecurity Infrastructure / Networking / firewall implementation and experieice

* Possess positive attitude to learn, has initiative and independent

* Strong analytical skills and able to work under tight timelines

* Strong team player with excellent interpersonal and communication skills, and the ability to work independently Pro-active and able to work in a fast pace environment and handle multiple tasks when required

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Duties and Responsibilities

• Serve as a technical expert for one or more high power and high voltage converter topologies and control subsystems or features, capable of independent decision making for critical technical issues
• Applies broad knowledge in sensors, power electronics control algorithms, electrical hardware design, software, signal processing, and data analysis methods and tools to drive power converter hardware design, control system and product development to improve product efficiency, minimize losses and increase power density of converter systems
• Leads the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Leads the design and building of tools that allow debugging, analysis, and evaluation of control system performance. Leads the root cause analysis for control system failures in products for integration and fielded units during escalations
• Leads the electrical converter design and topology selection for improved product features to increase product market penetration and differentiation
• Provide guidance on PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems
• Lead and perform integration activities with mechanical and firmware team to troubleshoot the control system, design and execute test plans and test automation, and to develop and test the power converters
• Lead in the design failure mode and effects analysis (DFMEA), design for manufacturing, and design for cost reduction efforts
• Support on product certifications and compliance
• Documents work results with requirements, design specifications, procedures, and training materials
• Mentors junior engineers

Knowledge, Skills and Abilities

• Advance power electronics design: In depth knowledge on designing different converter topologies used on advance power electronics systems for the high voltage and high power applications
• Control System Design: Lead the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration
• Algorithm Development: Develop control algorithms and strategies for power converters to improve dynamic response, fault tolerance, and performance
• Modeling and Simulation: Create mathematical models and perform simulations to validate control system designs and optimize performance
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware
• Testing and Validation: Design and execute test plans to validate control system performance and robustness
• Hardware Integration: lead and coordinate the integration of control electronics with power converter hardware
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases
• Compliance: Ensure that control systems meet industry standards and regulatory requirements
• Mentorship: Provide guidance and mentorship to junior controls engineers

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field
• Minimum of 25 years of experience in electrical hardware design and controls engineering, with a focus on advance power converter systems
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink)
• Strong programming skills in languages such as C/C++ for embedded systems
• Experience with hardware-in-the-loop (HIL) testing and control system validation
• Knowledge of grid integration, grid codes, and power quality standards is a plus
• Excellent problem-solving skills and attention to detail
• Effective communication and teamwork abilities
• Ability to work in a dynamic and collaborative environment

To supervise, execute and monitor the activities of manufacture floor to ensure reliable and optimal operation of processes, equipment, utility and facility so as to achieve target production levels within the framework.

Responsibilities:

· Develop, review, and update all process control documents, procedures and operation condition sheet.

· Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.

· Perform trial production and test run of new grade, new process and equipment.

· Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.

· Provide technical support and documentation for manufacturing process, including corrective measure for customer complaint in technical viewpoint

· Ensure availability of equipment, tools, production consumables, transfer of input materials for daily production preparation and follow up on ensuring housekeeping of production floor.

What we're looking for

• Bachelor's degree in engineering with a focus on Process, Mechanical or Manufacturing Engineering
• 2-4 years of experience in a process engineering or validation role, preferably in a manufacturing environment
• Proficient in process validation methodologies and techniques
• Strong problem-solving and analytical skills, with the ability to interpret and act on data
• Must be able to write and communication in Mandarin and English
• Excellent communication and interpersonal skills, with the ability to work effectively in a team
• Familiarity with quality management systems and regulatory requirements in the manufacturing industry
• Proactive and detail-oriented, with a commitment to continuous improvement
• Willing to work in Jurong

HOW TO APPLY:

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Interested candidates, may contact handphone no. 80350150 for more details.

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• SolidWorks or AutoCAD experience desired
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce.   We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people.   While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.     

The Opportunity: 

We are looking for Versatile, curious, and energetic Software Engineers who embrace solving complex challenges on a global scale.  As a Visa Software Engineer, you will be an integral part of a multi-functional development team inventing, designing, building, and testing software products that reach a truly global customer base. While building components of powerful payment technology, you will get to see your efforts shaping the digital future of monetary transactions.   

The Work itself: 

• Design code and systems that touch 40% of the world population while influencing Visa’s internal standards for scalability, security, and reusability 

• Collaborate multi-functionally to create design artifacts and develop best-in-class software solutions for multiple Visa technical offerings 

• Actively contribute to product quality improvements, valuable service technology, and new business flows in diverse agile squads 

• Develop robust and scalable products intended for a myriad of customers including end-user merchants, b2b, and business to government solutions. 

• Leverage innovative technologies to build the next generation of Payment Services, Transaction Platforms, Real-Time Payments, and Buy Now Pay Later Technology 

• Opportunities to make a difference on a global or local scale through mentorship and continued learning opportunities 

Essential Functions:

• Demonstrates relevant technical working knowledge to understand requirements.

• Identifies and contributes to the development and solution strategies to team members that improve the design and functionality of interface features across one or more project features, under minimal guidance.

• Applies standard processes on the use of programming languages (e.g. HTML, C++, Java) to write code that fulfills website modification requests and technical requirements. 

• Collaborates with others to support the piloting of new technology capabilities and features that enhance the user website experience across e-commerce products.

• Analyzes bugs for simple issues and applies debugging tools to verify assumptions.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale

• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions

• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++)

• Builder: Experience building and deploying modern services and web applications with quality and scalability

• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.

• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams

**We do not expect that any single candidate would fulfill all of these characteristics. For instance, we have exciting team members who are really focused on building scalable systems but didn’t work with payments technology or web applications before joining Visa.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Role:

As a Graduate Software Engineer, you’ll join our Engineering team in June 2025. This full-time role offers a chance to make a meaningful impact and kickstart your career. 

How You’ll Make an Impact: In this role, you will:

• Collaborate cross-functionally to shape and build our product.
• Create clear, consistent, and high-performing interfaces.
• Understand and solve customer challenges.

Growth and Development:

At Wise, we believe in continuous learning and development. You will have access to:

• Company Onboarding and Engineering Bootcamp during your first weeks - introduction to Wise and to the engineering tools and terminology we use at Wise, designed to bridge the gap between university and working in a live production environment
• Engineering Academy - a 9 months programme of essential technical topics for engineering graduates. Topics are selected and delivered by our engineering community on a bi-monthly basis
• Mentorship/ buddy programme - you will have a buddy assigned to you to give you as much possible connection with people who know what you’re going through!

• MNC, Tuas, Transport (2 ways)
• Heavy travelling, Good exposure and opportunities
• Basic $3800 - $5000,overtime claim
• Overseas allowances, mobile allowance
• Performance bonus
• No experience can apply, On-the-job training

Role & responsibilities:

• Support the Senior/ Service & Commissioning Engineer on site.
• Provide technical expertise and carryout service order assignments from the Service & Commissioning Manager/ Service & Commissioning Coordinator
• Field representative of the company to evaluate, troubleshoot, analyze, repair, test, and return equipment to service as required or instructed by a service order in a safe and effective manner.
• Create daily reports about the performed service tasks and all related issues and send them to the Service Mailbox
• Complete all the required documentation & write reports regarding the work

Requirements:

• Minimum a Degree in Electrical, Electronic, Computer Science or equivalent
• Good, basic, technical insight into electrical, hydraulic and basic mechanical engineering fundamentals
• 1yr of relevant experience in Marine/Oil & Gas industry
• No experience can apply as on-the-job training is provided
• Good communication skills
• Analytical and systematic approach to problem solving
• Basic understanding of programming and industrial control systems is a plus
• Willing to travel abroad heavily
• Willing to work overtime
• Having a great desire to gain more knowledge and skills
• Positive, solution driven, hands on attitude.
• Can work well in a team but having a great level of self-management and independence

Interested applicants, please send your profile to [email protected]

Responsibilities:

• Responsible for all type maintenance work related to steam turbine.
• Carry out corrective and preventive maintenance in accordance to the work instruction and procedures.
• Possess knowledge and skills on turbine and maintenance at power plant.
• Knowledge in specialized area & ability to resolve technical issues.
• Ensure continuous improvement on the plant’s systems and processes in terms of productivity, reliability, and safety.
• Ensure works are carried out in compliance to the safety and Statutory requirements
• Conduct planned outages effectively and complying with regulatory, safety and production requirements.
• Any other ad-hoc duties assigned.

Requirements:

• Min Diploma or Bachelor's degree in Mechanical Engineering.
• Min 3 years working experience in the relevant field.
• Experience in Power Plant industry is an advantage.
• Willing to work in Tuas South.

• Developing detailed designs.
• Doing feasibility assessments and site inspections.
• Preparing and implementing project plans.
• Researching and providing estimates for projects.
• Reviewing government regulations and ordinances.
• Monitoring and optimizing safety procedures, production processes, and regulatory compliance.
• Making recommendations or presenting alternative solutions to problems.
• Confidently liaising with clients and other professional subcontractors.
• Project management duties (e.g. managing budgets, resources, and deadlines; acquiring and compiling quotes, etc.).

• To assist the Project Manager in the daily execution of work;
• To understand tunneling works such as Mined Tunnels and Cross Passages;
• Full Time Site In-Charge that is based on site permanently;
• Inspecting construction sites regularly to identify and eliminate potential safety hazards;
• Enforcing site safety rules to minimize work-related accidents and injuries;
• To supervise the work of sub-contractors and in-house workers;
• To work closely with other site operations staff to meet the project schedule;
• Ensure installation is carried out as per construction drawings;
• To monitor the progress and quality of work being performed by workers;
• Ensure that works are executed within an acceptable standard of workmanship;
• Attend the daily tool-box meeting and convey clear instruction accordingly;
• Understand and ensure compliance in project requirement and scope of work.
• Prepare Daily Reports and Production Report.

Responsibilities:

· Management, operation and maintenance of power plant and ancillaries.

· Liaise with MOM, NEA for Boiler annual statutory inspections and report submissions.

· Prepare procedures, checklist and training materials to train maintenance team and operators.

· Coordinate with maintenance and engineering department and contractor for attending the respective works.

· Closely monitor Chimney emission and control the combustion as per relevant government laws and regulations.

· Ensuring the overall efficiency of the boiler and optimization of the treatment process.

· To assist fully with and help implement and manage all Health, Safety and Environmental practices.

· Any other ad-hoc duties assigned by supervisor.

Requirements:

· Min Diploma or Bachelor's Degree in Electrical Engineering.

· Min 3 years working experience in the relevant field.

· Experience in Power Plant industry is an advantage.

· Willing to work in Tuas South.

Job Responsibilities:

• Taking the conceptual design through to implementation and handover;
• Ensuring sustainability targets are incorporated into the design;
• Producing the tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing Sub-contractor progress meetings;
• Chairing Mechanical Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance Engineers to ensure they are aligned with the requirements of the specification;
• Mentoring of an Engineer with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring each System Supervisor is provided with the current and applicable shop and space management drawings;
• Ensuring the System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation

Requirements:

• Degree in Mechanical Engineering
• At least 10 years of experience in design & construction

We are seeking a highly skilled and experienced Assistant Chief Engineer to join our dynamic team in Singapore. In this crucial role, you will work closely with the Chief Engineer to oversee and manage all technical operations related to our facilities, ensuring optimal performance, efficiency, and guest satisfaction.

• Assist in managing the day-to-day operations of the engineering department, including maintenance, repairs, and upgrades of all building systems and equipment
• Develop and implement preventive maintenance programs to ensure the longevity and efficiency of all facilities and equipment
• Collaborate with other departments to address technical issues and improve overall operational efficiency
• Oversee and coordinate the work of engineering staff and external contractors
• Assist in preparing and managing departmental budgets, including forecasting and cost control measures
• Ensure compliance with all relevant safety regulations, building codes, and environmental standards
• Implement energy-saving initiatives and sustainable practices to reduce environmental impact and operational costs
• Participate in emergency response planning and execution, including fire safety and natural disaster preparedness
• Contribute to long-term strategic planning for facility improvements and upgrades
• Provide technical guidance and training to engineering staff to enhance their skills and knowledge
• Assist in the selection and procurement of equipment, tools, and supplies for the engineering department

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Vulnerability Management) to join us!

A brief summary of your job responsibility:

• Plan, develop vulnerability management strategies to detect non-compliance or security vulnerabilities.
• Perform and track vulnerability scans to ensure that vulnerabilities are resolved or mitigated promptly.
• Provide security consultancy on how to close/mitigate vulnerabilities.
• Lead implementation of enterprise security infrastructures which includes Contractor management, design validation and test acceptance.
• Perform maintenance on the enterprise security infrastructures that covers service and security posture upkeep.
• Plan and participate in areas of security operations to ensure that processes meet defined information security policies and standards, and evolving security threats.
• Implement other Security products such as Security Information and Event Management (SIEM) and Network Intrusion Detection and Prevention System (NIPS)

To succeed in this role, you will ideally have:

• At least 3 years of experience in implementing and/or managing VMS system
• Team player with strong analytical thinking and problem-solving skills
• Knowledge of operating systems including Linux/Unix and Windows
• PowerShell scripting is an advantage
• VMS product certification such as Tenable, Rapid7 is an advantage
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage
• Possess the following soft skills and attributes:
• Ability to justify new initiatives and recommend new initiatives to stakeholder(s)
• Conceptualise the Concept of Operations for the new initiatives
• Familiar with tendering process, defining requirements in tender specification
• Team player and able to lead discussions between internal teams (Operations, Security, Contract) and external product principals or system integrator
• Requires minimal supervision from supervisor
• Good written and verbal communication, with the ability to present and communicate effectively with non-technical audience.
• Able to work independently and as a good team player with analytical, management and planning skills
• Dynamic and with good analytical/conceptual thinking and problem-solving skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will be commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Endpoint Protection) to join us!

A brief summary of your job responsibility:

• Lead implementation of enterprise security infrastructures which includes Contractor management, design validation and test acceptance.
• Perform maintenance on the enterprise security infrastructures that covers service and security posture upkeep.       
• Plan, develop and maintain endpoint security policies in Endpoint Protection system to detect non-compliance or security threats through monitoring.
• Escalate security incident alert to respective system owner and assist in containment and recovery from the security incident.
• Plan and participate in areas of security operations to ensure that processes meet defined information security policies and standards, and evolving security threats.
• Implement Endpoint Protection Security System.
• Implement other Security products such as Security Information and Event Management (SIEM) and Network Intrusion Detection and Prevention System (NIPS).

To succeed in this role, you will ideally have:

• At least 3 years of experience in implementing and/or managing EPP system
• Team player with strong analytical thinking and problem-solving skills
• Knowledge of operating systems including Linux/Unix and Windows
• PowerShell scripting is an advantage
• EPP product certification such as Symantec Endpoint Protection, McAfee ePO, Microsoft Defender for Endpoint is an advantage
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage
• Possess the following soft skills and attributes:
• Ability to justify new initiatives and recommend new initiatives to stakeholder(s)
• Conceptualise the Concept of Operations for the new initiatives
• Familiar with tendering process, defining requirements in tender specification
• Team player and able to lead discussions between internal teams (Operations, Security, Contract) and external product principals or system integrator
• Requires minimal supervision from supervisor
• Good written and verbal communication, with the ability to present and communicate effectively with non-technical audience.
• Able to work independently and as a good team player with analytical, management and planning skills
• Dynamic and with good analytical/conceptual thinking and problem-solving skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will be commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Duties and Responsibilities

• Support the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Support the design and building of tools that allow debugging, analysis, and evaluation of control system performance.
• Conduct root cause analysis for control system failures in products for integration and fielded units during escalations.
• Perform PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems.
• Performs integration activities including troubleshooting the control system, designing and executing test plans and test automation, to ensure the algorithms functions as designed.
• Documents work results with requirements, design specifications, procedures, and training materials.

Knowledge, Skills and Abilities

• Control System Design: Assist in the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration.
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware.
• Testing and Validation: Design and execute test plans to validate control system performance and robustness.
• Hardware Integration: Work closely with hardware engineers to ensure seamless integration of control electronics with power converter hardware.
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports.
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases.
• Compliance: Ensure that control systems meet industry standards and regulatory requirements.

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field.
• Minimum of 7 years of experience in controls engineering, with a focus on power electronics field.
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink).
• Strong programming skills in languages such as C/C++ for embedded systems.
• Experience with hardware-in-the-loop (HIL) testing and control system validation.
• Knowledge of grid integration, grid codes, and power quality standards is a plus.
• Excellent problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.
• Ability to work in a dynamic and collaborative environment.

• To assist the Project Manager and Project Engineer in the daily execution of work;
• Based on site permanently.
• Inspecting construction sites regularly to identify and eliminate potential safety hazards;
• Making sure workers are following safety rules to minimize work-related accidents and injuries;
• To work closely with other site operations staff to meet the project schedule;
• Ensure installation is carried out as per construction drawings;
• To supervise the progress and quality of work being performed by workers;
• Knowledagble in tunnels and shafts work;
• Attend the daily tool-box meeting and convey clear instruction accordingly;
• Understand and ensure compliance in project requirement and scope of work.

Job Description

• Provide technical support to Operating Plants for safe & smooth plant operations
• Initiate and implement plans for performance improvement and economic / capacity / energy optimization
• Perform plant simulation to identify high return opportunities to business team

Requirements

• A recognized Degree in Chemical Engineering
• 3-4 years' experience in process plants (petrochemical or refinery)
• Entry level engineers will also be considered
• Familiar with process simulation and planning software
• Resourceful and possess excellent analytical & interpersonal skills
• Possess good leadership qualities
• Good written and verbal communication skill

Job Responsibilities

• Writing of technical documents for inquiry and purchase order for equipment packages as per project specification, requirements of industry codes and standards, classification society rules and all relevant regulatory.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment. Make clarification, evaluation and technical comparison of providers' bid, technical analysis of offers.
• Assists in placing and executing the orders.
• Review of supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance.
• Ensures all technical requirements incorporated in engineering deliverables. Reviews and validates with various disciplines and stakeholders.
• Approaching and coordinating with vendors for package solutions.
• Follow-up of vendors and conduct of clarification meetings.
• Provides engineering support and advice for quality work at supplier shop, construction or commissioning work at site.
• Have relevant experience in FPSO.

Job Requirements

• Degree in Engineering disciplines
• At least 5 years of relevant working experience in marine/ offshore industry
• Well versed with regulatory and class requirements.
• Possess good communication and interpersonal skills.
• Able to work in a team.
• Proficient in Microsoft Office and engineering design software (e.g. S3D, Autocad)
• Willing to work in China

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Act as the primary point of contact for all matters related to the E-house components of the FPSO project. Coordinate with engineering interdisciplinary teams, contractors, and stakeholders to ensure seamless integration of E-house systems.
• Be the first point of contact for any E-house related engineering issue.
• Lead a team of engineers, topside design contractor, and E-house module EPC contractors to conduct engineering design, support the integration, construction, and commissioning activities until project delivery.
• Review and approve design specifications for E-houses, ensuring they meet project requirements and industry standards. Collaborate with project stakeholders to address any design issues or modifications.
• Oversee the engineering design, construction and assembly of E-houses, ensuring adherence to project timelines, specification requirements, budget constraints, and quality standards. Conduct regular site inspections and progress meetings to monitor work and resolve any issues.
• Attend FATs, and any oversea technical clarification meetings as required.
• Involve in technical discussions and technical review for electrical studies.
• Implement and monitor quality control processes to ensure the E-house systems are built to specification. Conduct design review, technical clarification meetings, and validation of E-house system design.
• Work with E-house contractor and topside design houses to maintain accurate and comprehensive documentation related to E-house engineering design.
• Prepare and present reports on project status, issues, and achievements.
• Identify and resolve any technical, or project management issues that arise during the E-house design, construction and commissioning phases. Implement corrective actions as needed.

Job Requirements

• Minimum Bachelor’s degree in Electrical Engineering is mandatory. Mechanical Engineering, or a related field, or any advanced certifications (e.g. PMP) or degrees are a plus.
• Minimum of 8 years of experience in engineering coordination, with a focus on electrical systems and E-houses, preferably in FPSO or offshore projects.
• Strong knowledge of E-house design, construction, and commissioning. Proficiency in project management software and tools. Excellent communication, leadership, and problem-solving skills.
• Ability to work in a fast-paced environment and adapt to changing project requirements. Willingness to travel to project sites as needed.

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.