RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Responsibilities

• Serves as a subject matter expert in E&I equipment failures and ensures the reliability of those equipments.
• Provides technical expertise to plant personnel (Supervisors and technicians) on troubleshooting failures, repairs, and ensuring E&I equipment meets the design intent.
• Diagnose and troubleshoot critical and major plant issues related to E&I, participate in Root Cause Analysis (RCA) to identify solutions, and drive continuous plant improvement initiatives while managing costs effectively.
• Troubleshoot and maintain PLC (Programmable Logic Controller / SIS), with a strong emphasis on experience with Allan Bradley PLCs.
• Provide expertise in maintaining electrical systems, including switchgear, transformers, MV/LV switchboards, Fire alarm and CCTV systems.
• Mentor technicians in executing preventive and corrective maintenance tasks, ensuring adherence to procedures and standards.
• Supports Team Lead in developing the maintenance budget to support the maintenance strategy.
• Ensure adherence to plant Health, Safety, and Environment (HSE) standards. Actively participate in HSE walkdowns and initiatives to maintain high safety standards.

Requirements:

• Bachelor’s degree in electrical engineering or Instrumentation / Maintenance Engineering.
• At least 3 years of experience in Electrical and Instrumentation Maintenance in a chemical or petrochemical or pharmaceutical plant operations.
• Strong knowledge of field instrumentation, electrical systems, control systems, and industry standards.
• Excellent analytical and troubleshooting abilities with a methodical approach to problem resolution.
• Proven ability to work effectively in a team environment, fostering collaboration and teamwork.
• Strong communication and interpersonal skills, with the ability to present technical information clearly to various stakeholders.
• Demonstrated ability to stay current with new technologies and apply innovative solutions to optimize plant operations.
• Effective leadership and mentoring skills with a commitment to developing team members.
• Flexible and resourceful, with a positive attitude and willingness to learn from experienced colleagues

Interested candidated can email your latest CV to [email protected]

Position Summary

• To ensure legal compliance for all activities within assigned area of responsibility.
• To ensure a safe and healthy work environment within assigned area of responsibility.

Responsible for: (The main job activities)

• Ensure legal compliance for all activities within relevant regulatory framework and PaxOcean’s HSE Management System
• Support HSE Manager to implement and execute HSE Programs & Initiatives
• Plan, conduct and participate in audits to identify potential areas of improvement and best practices.
• Organise and conduct regular HSE site inspections with all relevant stakeholders and follow up on all identified non-conformances
• Function as a safety assessor as per relevant regulatory requirements
• Function as a Site Incident Controller (SIC) and lead the Company Emergency Response Team (CERT) during emergency situations
• To serve as secretary for the Vessel Safety Coordination Committee (VSCC) for all assigned projects
• Initiate and conduct investigation for the purpose of identifying root causes upon any occurrences
• Liaise with relevant authorities as point of contact representing PaxOcean
• Any other tasks or responsibilities as assigned by HSE Head

Job Requirements

• Diploma / Degree in any Engineering field or related discipline
• Hot work Assessor
• Confined Space Assessor
• Work at Height Assessor
• Relevant emergency response certifications will be an added advantage
• WSH Level C
• Candidates without prior experience are encouraged to apply.

Tasks:

● Develop and implement SLAM algorithms for accurate simultaneous localization and

mapping of autonomous robots in outdoor environments..

● Integrate sensor data from various sources (lidar, cameras, IMUs, wheel encoders) to

improve SLAM performance and accuracy.

● Utilize calibration techniques to ensure accurate sensor data fusion for SLAM.

● Collaborate with other team members to ensure overall system integration and

functionality.

Education:

● A bachelor's or master's degree in Robotics, Computer Science, Electrical

Engineering, or a related field is typically required.

Technical Skills:

● SLAM algorithms: Proficiency in developing and implementing SLAM

techniques such as EKF-SLAM, Graph SLAM, or FastSLAM.

● Sensor fusion: Experience with integrating data from sensors such as lidar,

cameras, IMUs, and wheel encoders for accurate localization and mapping.

● Robotics: In-depth understanding of robotic systems, kinematics, dynamics,

and control theory.

● Programming languages: Proficiency in languages commonly used in

robotics, such as C++, Python, or ROS (Robot Operating System).

● Simulation tools: Experience with robotic simulation frameworks like Gazebo

or V-REP.

● Problem-solving and analytical skills: Strong analytical and problem-solving

abilities are vital for identifying issues, debugging complex systems, and

proposing effective solutions.

● Communication and teamwork: Excellent verbal and written communication

skills to collaborate with cross-functional teams, document technical

specifications, and present findings effectively.

Experience:

● SLAM implementation: Prior experience in developing SLAM algorithms and

systems for autonomous robots.

● Sensor integration: Knowledge of integrating sensor data from various

sources to improve SLAM performance.

● ROS: Practical experience with the Robot Operating System (ROS) for robotic

software development and integration.

Key Responsibilities:

• Design and develop electrical systems, components, and wiring diagrams.
• Design and oversee the electronics hardware design activities of the whole product.
• Select electrical/electronics components for new product development, and replacement for existing products as well.
• Conduct electrical testing and troubleshoot systems to ensure functionality.
• Collaborate with cross-functional teams (e.g., mechanical) on product development.
• Liaise with supplier and operation for design improvement.
• Provide technical support of products introduced into both the domestic and international markets.
• Work closely with a multidisciplinary team to drive cost optimization, manufacturability, quality and reliability.
• Provide technical support during installation, commissioning, and maintenance of systems.

Requirements:

• Bachelor’s degree in electrical engineering or related field.
• Proficient in electrical design software tools
• Strong knowledge of electrical systems, power distribution, control systems, and circuit design.
• Strong problem-solving skills and attention to detail.
• Hands-on experience with hardware testing, troubleshooting, and equipment commissioning.
• Experience in microcontroller platform hardware design is a plus
• Knowledge of HVAC systems is a plus.

The person will be responsible for

1) Prepare & compile Monthly Progress Claim for all the projects;

2) Prepare & submit Variation Order for all projects where applicable;

3) Quantity Take-off;

4) Assist in monitoring & compilation of all ISO 9001, ISO14001 & ISO45001 documentation for Audit & BCA Accreditation;

5) Any others relevant task that maybe assign from time to time

Qualifications : Diploma in related field;

Experience : Fresh or 2 years relevant experience will be added advantage;

JOB RESPONSIBILITIES:

• Research on concepts to innovate and improve existing/new products
• Plan, design and develop products within quality target and cost
• Consolidate design input and develop schedule of conceptual design for Manager’s approval
• Participate in Innovate Project Team Projects - Execute basic R&D projects and focus on main research area: Bike System

JOB REQUIREMENTS:

• Degree in Mechanical Engineering / Mechatronics
• Proficient in CAD / CAE, Finite Element Analysis using NX
• Highly innovative and creative
• Must know how to cycle
• Able to perform overtime
• Open to overseas training / secondment

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Roles & Responsibilities

* Project management, system testing, technical analysis, optimization of processes and working collaboratively with key stakeholders including technology partners
* Providing engineering design support; addressing technical and safety requirements for battery energy storage systems in accordance with industry standards, project and local regulatory requirements
* Preparing and reviewing technical documentation
* Performing analysis and diagnostics; proposing and implementing corrective actions for performance and reliability exceptions of battery energy storage systems
* Managing the day-to-day operations and maintenance of smart grid and battery energy storage systems to ensure optimal availability for market participation and grid ancillary services.

Requirements:

* Degree in Engineering, preferably in Electrical/Electronic Engineering
* Experienced working with, and deep understanding of Remote Terminal Unit, Power Conversion System, DC-to-DC Converter, illary liquid cooling system, different battery types and Battery Management System
* Keen to explore new technology and adaptable to related challenges
* Passionate about energy management and sustainability
* Good analytical and problem-solving skills
* Able to conceptualize new ideas and communicate effectively, with strong written capabilities

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

RESPONSIBIITIES & DUTIES

* To design, write & troubleshoot machine electrical & control systems for factory automation, smart-factory technologies as well as AI platform.

*To design and perform detailed designing for machine electrical control systems for Factory Automation, Smart-Factory Technologies, Machine & Equipment Manufacturing.

*To write Programmable Logic Control (PLC) program for automatic machine control & processes. Preferably, with Industrial PC (IPC) programming experiences too.

* To collaborate and work together with the Design Team (comprising of both mechanical & electrical members) for the design concept arising from new projects proposal and confirmed projects.

*To lead the in-house electrical staff and/or the company’s appointed electrical vendors on the respective machine control and electrical systems and operations of the projects.

*To lead the assembly members & technicians during Machine set-up, Machine Assembly Process, Alignment, Testing & commissioning in the Company and/or customer site.

*To spearhead meetings and review with the design team and the customers on control system requirements and specification.

SMART-FACTORY TECHNOLOGIES & SOLUTIONS

*To team up with cross-disciplinary teams of engineers & specialists focusing on smart factory technologies & projects.

*To ideate and build robust data and digital technology driven solutions for advanced manufacturing / industrial processes.

*To leverage AI and robotics-integration solutions to meet customers’ automation & real-time needs.

PROGRAMMING SKILLS & REQUIREMENTS

* PLC based system: ladder, functional block, structure text

* PC based system: C++, VB (visual basic)

Job Description

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams, etc.
• Work with 3D design team for 2D deliverables
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization
• Site inspection and clarification
• Change management
• Communication to integrate with project team of engineers and technicians for efficient deliveries

Requirements

• In-depth knowledge of power plant engineering, prefer to have working experience in Singapore.
• Minimum 5 years working experience for Electrical composite plant project
• Familiar with relevant codes, international standards, Singapore local standards, client Design Specifications and procedures.
• procedures, and have a thorough working knowledge of the latest design and analytical techniques
• Familiar with cable interconnections, cable tray routing, cable tray support engineering design, equipment layout, installation materials, cable accessories selection, cable drum schedule, etc
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks and Autocad
• Strong verbal and written communication skills for effective collaboration and reporting.
• Collaborate with different parties for plant engineering coordination.

Responsibilities

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.
• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.
• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.
• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.
• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.
• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.
• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.
• Coordinate and track procurement activities for green marine system components.
• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.
• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.
• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.
• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.
• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.
• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.
• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.
• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.
• Excellent analytical and problem-solving abilities, with a keen attention to detail.
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.
• Strong leadership skills, with the ability to motivate and guide project teams.
• Knowledge of procurement processes and experience in managing supplier relationships.
• Familiarity with industry safety standards and practices, and ship classification society requirements for marine vessels.
• Ability to travel to project sites and work in outdoor or shipyard environments as needed.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce.   We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people.   While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.     

The Opportunity: 

We are looking for Versatile, curious, and energetic Software Engineers who embrace solving complex challenges on a global scale.  As a Visa Software Engineer, you will be an integral part of a multi-functional development team inventing, designing, building, and testing software products that reach a truly global customer base. While building components of powerful payment technology, you will get to see your efforts shaping the digital future of monetary transactions.   

The Work itself: 

• Design code and systems that touch 40% of the world population while influencing Visa’s internal standards for scalability, security, and reusability 
• Collaborate multi-functionally to create design artifacts and develop best-in-class software solutions for multiple Visa technical offerings 
• Actively contribute to product quality improvements, valuable service technology, and new business flows in diverse agile squads 
• Develop robust and scalable products intended for a myriad of customers including end-user merchants, b2b, and business to government solutions. 
• Leverage innovative technologies to build the next generation of Payment Services, Transaction Platforms, Real-Time Payments, and Buy Now Pay Later Technology 
• Opportunities to make a difference on a global or local scale through mentorship and continued learning opportunities 

Essential Functions:

• Demonstrates relevant technical working knowledge to understand requirements.
• Identifies and contributes to the development and solution strategies to team members that improve the design and functionality of interface features across one or more project features, under minimal guidance.
• Applies standard processes on the use of programming languages (e.g. HTML, C++, Java) to write code that fulfills website modification requests and technical requirements. 
• Collaborates with others to support the piloting of new technology capabilities and features that enhance the user website experience across e-commerce products.
• Analyzes bugs for simple issues and applies debugging tools to verify assumptions.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale
• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions
• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++)
• Builder: Experience building and deploying modern services and web applications with quality and scalability
• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.
• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams

**We do not expect that any single candidate would fulfill all of these characteristics. For instance, we have exciting team members who are really focused on building scalable systems but didn’t work with payments technology or web applications before joining Visa

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs. 

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

• Provide IT technical onsite support for end user services problem which includes identification, diagnosis, rectification and escalation.
• Support on desktops, notebooks, printers, scanners hardware components.
• Installation, re-installation, troubleshooting and reconfiguration of Microsoft Windows and Microsoft applications that are found in the Desktop PCs and Notebook PCs. Examples of such software are Windows 10 OS or any standard desktop OS, MS Office, Internet Explorer, MS Outlook, MS Outlook Express, etc.
• Installation of Apple IPad software’s.
• Provide support for queries, escalation, problem determination, resolution and MAC – move, add and change.

• At least a Professional Certificate, Diploma or advanced /Higher /Graduate Diploma.
• Willing to learn and work in a team.
• Professional presence and excellent communication skills.
• Hardware Skill – Desktop, Laptop, Printer and Scanner
• ·Windows OS (Must know Windows 10)

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Data Engineer

Internal Code: A24122

This is a contract role - the engagement is from January 2025 to July 2025

This is a healthcare application:

• Mobile application (iOS and Android)
• Dashboard (React)

What will you do?

• Support the development and business teams in unit testing and archiving data, engineered features, and algorithmic inputs/outputs throughout the data pipeline and to support analytics.
• Proven experience as a data engineer/ data analyst in mobile app development projects and administrative dashboards.

1. Create unit tests throughout the data and algorithms domain:

• Work with engineering and business teams to implement wide-coverage unit tests of data and engineered features at different stages throughout the data collection and processing pipeline
• Create unit tests of inputs to and outputs from the algorithms that drive the clinical service
• The unit tests include validation of the inputs and outputs of black-box machine learning algorithms
• Establish a regular process to execute the tests and document their outcomes as a part of our product development and release lifecycle

2. Implement and refine mechanisms to continuously archive the state of algorithmic inputs and outputs:

• Implement a process of taking snapshots of data/features input into algorithms necessary to recreate their outputs/predictions at any point in the past during the service
• Communicate requirements to the software development team

3. Assist in the successful delivery of regular service analytics and reports:

• Support the business and analytics teams in their daily and weekly delivery of reports on data completion, user engagement, and algorithm actions by addressing any data quality and validation requirements.

What are we looking for?

• Bachelor's Degree in computer science, engineering, business analytics, technology, or a related field.
• Minimum of 2 years of experience in data engineering, data analytics, or data product management roles within the tech industry. Experience in healthcare is a plus.
• Ability to implement tests in Python.
• Experience in machine learning algorithms
• Good understanding of the validation requirements of an algorithmic product. Knowledge of healthcare regulation and auditing requirements is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

• MEP Contractor
• Basic up to $5000
• Office hour (alternate half Sat)
• Location: Pioneer
• Singaporean ONLY

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

• Provide pre-sales technical support to propose cost competitive system design solution based on tender spec & customer requirement
• Design solutions for Access Control, CCTV, Public Address, Emergency Voice Communication, Fire Alarm, Integrated Security Management and other necessary system as deemed required by the prospective customer / project (90 %)
• Foundational understanding of IT and Network systems will be necessary in design and technical assessments.
• Knowledge of Cyber-security issues and solutions will be an advantage.
• Review technical specification, system schematic, floor-plan drawings documents
• Provide system proposal and design that meet requirements & be cost competitive
• Manage the technical Compliance Appraisal, prepare Bill of Quantities and system write-up for the designed systems
• Manage Installation Work Appraisal (Scope of Work for installation)
• Prepare technical document submissions & product sourcing
• Support technical meeting with customers, end-users, consultants & vendors etc
• Demonstrate systems / products performance to clients and staffs
• Collaborate with sales, purchase & admin teams to meet tender submission date in time
• Product evaluation & POC support on potential system
• Report various system job request status with respect to milestone schedule to Section Head and all technical problem hindering system design progress

Halliburton invites qualified candidates to apply for the Software Engineer position.

The Software Engineer will leverage his/her strong software design and programming skills to provide technical leadership and build software solutions to address complex business needs.

Responsibilities

• Design and develop professional quality desktop applications in an agile environment
• Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
• Ensure the Technical Software Development process is optimized and projects are on track
• Define requirements, functional specifications, and testing documentation for various engineering software applications
• Design and develop unit test for code validation and automated regression testing of overall systems validation
• Incorporate lab testing and field testing with various cross-functional teams
• Job role contributes to value creation

Required Education and Skills

1. Bachelor’s degree in Computer Engineering or Computer Science
2. Minimum 3 years of related experience in software development.
3. Self-initiative, independent and a good team player
4. In addition to the above, candidate must have a minimum of 3 years of experience in the following

• Strong development experience using C++
• Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies
• Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
• Developing multi-threaded applications
• Developing Real-Time solutions (applications that run within a fixed-time constraint)
• Developing software using SQL, MS Access DB and MongoDB
• Developing software via Agile software development methodology
• Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
• Developing, debugging, and supporting software applications both locally and in remote locations
• Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
• Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
• Experience in Embedded Software development and Real-Time Operating System is added advantage

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Work Location: 315 Jalan Ahmad Ibrahim Singapore 639940 (company transport provided)

Work Schedule: 7:30 am to 4:30 pm

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Responsibility:

· Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.

· Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.

· Generate BOM and RFQ document.

· Communicate with contractor for automation equipment panel fabrication.

· Prepare factory acceptance test document for automation equipment panel.

· Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.

· Provide support on site installation.

· Updating of Circuit diagram, Control device and Equipment Installation layout.

Job Requirements:

· Degree/Diploma​/Higher Nitec​ in Electrical & Electronic Engineering

· Knowledge in automation design of the control system (Hardware & Software). Experience in motor control, hardware and software designs with controls using PLCs an advantage

· Fluency in English and Chinese, both written and oral to liaise with associates

· Good analytical reasoning, theoretical approach and communication skills

· Excellent interpersonal and Communication skills

· Self-motivated and able to work independently with minimum supervision

· Hands on experience on wiring assembly and installation will be an advantage.

· Proficient in MS office and other relevant software like AutoCAD or EPLAN 8 Electric.

· Fresh graduate can be considered.

We are looking for a talented Software Engineer with strong expertise in Python, Shell Scripting, Unix, and Automation. The ideal candidate is a self-starter who thrives in a fast-paced environment and can join immediately to contribute to mission-critical projects.

Key Responsibilities:

• Develop, test, and maintain Python scripts for automation and application development.
• Create and manage Shell Scripts for process automation and system management.
• Perform system administration and maintenance on Unix/Linux platforms.
• Design and implement automation workflows to streamline operations.
• Collaborate with cross-functional teams to gather and analyze requirements.
• Troubleshoot and resolve technical issues promptly.
• Ensure the security, reliability, and scalability of automated solutions.

• Min 5+ Years of experience as Software Developer
• Proficiency in Python programming, with a focus on scripting and automation.
• Strong knowledge of Shell Scripting
• Hands-on experience with Unix systems.
• Familiarity with automation tools and frameworks.
• Strong problem-solving and analytical abilities.
• Immediate joiner preferred

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.