• Marine Electrical Equipment (MNC company)
• Basic $3000 - $4000
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspection & Quality Control: Perform incoming and outgoing inspections according to established procedures, including factory routine tests and official tests for switchboards. Ensure that non-conforming products are separated and rejected as necessary.
• Quality Documentation: Maintain quality records and file data. Highlight quality issues to the appropriate management for action.
• Authorization & Release: Authorize the rejection of unsatisfactory parts and the release of conforming parts for storage and customer delivery.
• Customer Satisfaction & Warranty: Ensure the successful testing and commissioning of switchboards on-site or on vessels, and address warranty claims or customer quality complaints.
• Problem Prevention & Solutions: Initiate actions to prevent non-conformities, recommend solutions, and verify their implementation.
• Safety, Calibration & Housekeeping: Follow safety rules, use calibrated instruments for inspections, maintain good housekeeping in the QA department, and assist the manager in meeting quality objectives.

Qualifications

• Min ITE/ Diploma in Electrical Engineering
• At least 2 years of QA experience

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

The Senior Design Engineer is responsible for structural analysis and design compliance are met for the project.

A summary of the responsibilities of this position are, and not limited to, as follows:

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices in the work place.

Value Add of Position

• Design and calculation report for reinforced concrete, steel and geotechnical works using British Standards and Eurocode.

Technical Competencies

• Technical expertise and knowledge in Foundation, Structural and Civil works.

Qualifications and Education Requirements

• Minimum Degree in Civil Engineering from accredited Universities
• Prior 6 years of experience in design and construction (structural). Preferably have done data centre, marine offshore, and mixed-development projects.
• Have completed at least 1 project (data centre, commercial bldg., industrial)
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software
• Well versed in Autocad and BIM software is preferred

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Maintain and enhance IT applicationemig new enforcements to the applications, troubleshoot five us to klerdily causes of the problerres and providing workable solution to fix thes

Design and develop IT in according to specificatiores provided.

Perform Berative prototyping te introduce and enhance new features to the cors system.

Perform design, programming Integration, system testing, mint users in Uber Acceptance Test (UAT), documentation

Generate unit tests and end-to-end test scripts to ensure nothing breaks upon deploying new features and maintain current automated scripts in Jenkins.

Troubleshoot, identify, solve issues and develop automated test cases to prevent similar issues

See through all enhancements and fixes to ensure they are property deployed to the testing and live environment within the agreed time. That includes working with the end users, server administrators, database administrators and the system analysts supporting the IT systema.

Experience and skills requirements

Degree in Computer Science, Information Systems, Information/Infocomm Technology.

Computer or Electronics Engineering or related discipline.

Must have minimurn 3 yours of working experience in this role and good experience in the following skills/technologies:

Web Application Client-side Technologies (eg. JavaScript/Typescript ESS/E ReactJS, React Hooks, Redux, jQuery, HTMLSICSS, AJAX/JSON, NPM)

Web Application Server-side Technologies (eg. Asp.NET Core, Asp NET MVC.

Web GIS Technologies (eg. ArcGIS JavaScript API, ArcGIS Server REST API, GeoServer, PostGIS);

Database technologies (eg. Postgresql, MS SQL, Oracle); and

Code version control system (Ga).

Other requirements

Must have good communication skills and the ability to

Understand and communicate in English, in speech and writing.

Work with other members in a dynamic and fast-moving team

Work independently with minimum supervision

Work on own initiative and adhere to deadlines.

Added advantage with the following

Development using Microsoft Azure Cloud and/or AIVS Cloud

Open-source technologies such as NodeJS, Leaflet, GeoServer, PostgresSQL, PostGIS

Knowledge of geospatial and mapping concepts such as spatial analysis and map projections with ESRI technologies.

Experience with geoprocessing using Python scripts and ETL tools such as FIME

Experience in agile development and DevOps processes.

To coordinate between Application and Infrastructure Teams to implement the Infra Requirements for Applications

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards
• Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary
• Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects
• Researching and recommending solution that best meet business needs and enterprise operational requirements
• Provide technical support to application development teams
• Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Qualifications

• Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms
• Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases
• Knowledge in Networking (F5 GTM/LTM or any other SLB)
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Experience in banking or financial services institutions preferred
• Will need to work in shifts and in weekends
• Team player to work with multiple teams and teammates

Kindly take note of the following details for shift work

Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)

Shift Timing

a. Morning shift 6am to 3pm

b. General shift 9am to 6pm.

c. Afternoon shift 2pm to 11pm

d. Night shift 10pm to 7am.

Need to support including night shift, weekends and public holidays

• Assistant the Project Manager in overseeing the project, planning and ensure work is carry out according to master program
• Liaise with the consultant on technical issue and doing coordination on site issues with sub con
• Work with project team and ability to resolve technical issues
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil) or equivalent.
• At least 2 year(s) of working experience in the related field is required for this position.
• Experience in building projects.

Job description:

• Coordinating with all related stakeholders
• Coordinating & supervising works & site activities based on systems & engineering design
• Making sure Mechanical & Electrical job is done based on micro-schedule and master programme
• Ensuring Mechanical & Electrical job complied to specifications, drawings, & authority codes
• Diploma in mechanical engineering or above
• Mechanical & Electrical Engineer experience in construction industry
• Familiar with AutoCAD & Microsoft office

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

Responsibilities

· Creating and maintaining database standards and policies.

· Supporting database design, creation, and testing activities

· Managing the database availability and performance, including incident and problem management.

· Administering database objects to achieve optimum utilization.

· Defining and implementing event triggers that will alert on potential database performance or integrity issues.

· Performing database housekeeping, such as tuning, indexing, etc.

· Monitoring usage, transaction volumes, response times, concurrency levels, etc.

· Implementing security measures and frameworks, while ensuring compliance. Identifying, reporting, and managing database security issues, audit trails, and forensics.

· Designing database backup, archiving, and storage strategy.

· Installing upgrades and patches for Graph (Neo4j) or SngleStore

Requirements
•Experience driving major production incidents and organise incident retrospective meetings
•Experience with Unix System, MariaDB or MySQL or SingleStore or MongoDB or Oracle
•Experience with high availability, high-scale, and performant systems
•Experience with python and Unix scripting

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $4,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Mandatory Skills Checkpoint Firewall

Preferred Skills Network - Routing and Switching, Firewall Administration and Operation

Brief Job Description

• Provide technical support, propose solutions, and project related queries for all Wired, Wireless network.

• Perform analysis, Plan, Coordinate and Implement all change requests on existing network equipment.

• Maintain records of system details (e.g. configuration, changes, problems, disaster recovery document) for network equipment.

• Manage firewalls like Checkpoint, Cisco FTD, Palo Alto and NEXUS switches; F5 Load balancer

- Gather business and/or application requirements on the infrastructure to plan, design, install, test & implement systems in accordance with the specifications & service level.

- Aligned or enhanced ITSM/ITIL methodologies in daily operations e.g. Change, Incident, problem, release management & CMDB.

- Monitor & measure the performance & availability of systems proactively; implement corrective actions identified to improve performance & service level availability.

- Respond promptly to incident, root cause analysis & provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.

- Implement service continuity measures, i.e., backup/restore procedures & disaster recovery plan, to ensure continuous operation of the business.

- Create and maintain comprehensive documentation for all implemented networks.

- Assist in preparation of proposals and solution presentations.

We are the makers of possible
BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it’s no small feat. It takes the imagination and passion of all of us—from design and engineering to the manufacturing and marketing of our billions of MedTech products per year—to look at the impossible and find transformative solutions that turn dreams into possibilities.
Why Join Us?
A career at BD means learning and working alongside inspirational leaders and colleagues who are equally passionate and committed to fostering an inclusive, growth-centered, and rewarding culture. You will have the opportunity to help shape the trajectory of BD while leaving a legacy at the same time.
To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you’ll discover a culture in which you can learn, grow and thrive. And find satisfaction in doing your part to make the world a better place.
Become a maker of possible with us!

Job Summary

The Injection Molding Process Engineer is a "hands-on" position that plans, directs, and coordinates manufacturing equipment and processes to produce high quality injection molded product. The Process Engineer is responsible for coordinating the molding efforts on new program launches, setting up and/or revising manufacturing processes and assisting the manufacturing operations in problem solving and continuous process improvements. While monitoring the effectiveness of processes this individual quantifies results, documents and presents findings to management and prepares reports.
This position also mentors and provides training to other injection molding personnel.

Job Description

1. Oversee molding production operations to meet requirements of Safety, Quality, Delivery, Cost and People (SQDCP).
2. Develop a robust Molding process by applying Scientific / Decoupled Molding techniques along with Design of Experiments (DOEs).
3. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency (OEE).
4. Develop and maintain process documentation ensuring that processes and procedures are clearly stated and understandable for all employees. use Lean Manufacturing, Six Sigma, and other techniques to analyze process data to determine capabilities as well as improvement on OEE
5. Implement technical solutions including statistical methodology in continuous improvement to meet customer cost, quality, and delivery expectations.
6. Demonstrated ability to start-up, operate and shut down process related equipment. Must be able to work independently on new process development as well as troubleshooting current production issues and program robots and peripheral equipment
7. Work with equipment and material vendors to resolve machine and material issues.
8. Monitor and report issues with injection molds, make recommendations for refurbishment based on production factors such as cycles, process capability and tooling history.
9. Interact with customers to resolve issues and provide new project updates.
10. Facilitate and support facility and manufacturing safety, environmental, and ergonomics efforts.
11. Provide technical leadership and mentorship to process technicians, operators and other molding personnel.
12. Perform any other tasks as assigned.

Click on apply if this sounds like you!

Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

To learn more about BD visit: https://bd.com/careers

Primary Work Location

SGP Tuas - Tuas Plant

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS
• Diagnosing end-user system failures and implement repair solutions.
• Diagnosing printer and other peripheral devise failures and implement repair solutions.
• Troubleshooting network devices in order to ensure connectivity from the PC to the Network.
• Providing installation and upgrading services of hardware and software.
• Configuration and troubleshooting of phones and other mobile devices, tablets, and PDAs.
• Setup and troubleshooting audio/video equipment such as projectors and video conference equipment

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 1-1.5 years of relevant working experiences.
• Knowledge of multiple manufacturers and operating systems.
• Excellent troubleshooting capability.
• Using established procedures and working under immediate supervision, performs assigned tasks.
• Work is routine and instructions are usually detailed.
• Resolves routine questions and problems and refers more complex issues to higher levels.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

• Plan, lead and supervise upgrading works, addition and alteration works
• Lead a team of supervisors and workers and oversight of manpower for project execution
• Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices
• To attend site matters / discussions to resolve technical / site issues and progress matters
• Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management
• Monitor and control project schedule, materials delivery and budget etc
• Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Establish and maintain a detailed tracking and filing system of all documents
• To prepare, submit Variation Claims with instruction documents & part-plan from client
• Maintain all filing systematically & uploading of softcopies in the system
• To place materials order to Purchaser in advance as per Order list as per site requirement
• Responsible for ensuring implementing safety measures

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Responsibilities:
● You will be working in a fast-pace full-stack team experimenting and delivering new
products and services to government agencies related to PEGA and Common
Services from Government such as Singpass, Corpass and Internal Authentication
Mechanism.
● Expect to work within an agile development team to deliver high-quality software
applications according to requirements.

Requirements:
● Experience in PEGA Development
● Full Stack web development experiences.
● Knowledge of Java, JSP, J2EE, XML, and EJB.
● Knowledge of Scrum and Agile methodologies.
● Knowledge of coding languages such as Java, JavaScript, and TypeScript.
● Knowledge of one of UI frameworks: React.js, Vue.js and Angular.js.
● Knowledge of web technologies such as HTML5, JavaScript, TypeScript, CSS, and XML.
● Knowledge of E2E and automation testing.
● Knowledge of REST API.
● Knowledge of authentication, authorization, oauth2, SSO, and Active Directory.

Experience in the following would be advantageous:
● Experience with CMS and ERP.
● Experience with any of cloud services such as AWS, GCP and Azure.
● Outstanding project management abilities.
● Capability to handle difficult software problems.

Preferred

• A minimum of 3 years’ relevant working experience is preferred.
• Preferred character/personality traits:Has high expectations of self
  Keen to share knowledge with team mates
  Curious, open to new ideas
  Quick to learn new skills
  Self-driven and independent
  Open to work on other platforms because we want a cross-functional team
  

About the job

Company Description

Explore the future of communication and finance with Vama – a cutting-edge app that integrates instant messaging and secure payments, incorporating the latest Fintech technology.

Role Description

This is a full-time on-site role for a Software Quality Assurance Engineer at Vama in Singapore. The Software Quality Assurance Engineer will be responsible for software quality, quality assurance, software development, manual testing, and ensuring the highest quality of software across mobile (iOS and Android), desktop (React Electron), and cloud platforms (GCP). You will work closely with development teams to create and execute test plans, identify bugs, and ensure a seamless user experience.

Key Responsibilities:

• Designed, developed, and executed detailed manual test plans, test cases, and test scripts for iOS, Android, and React Electron desktop applications.
• Perform functional, regression, and exploratory testing to identify defects and ensure product stability and performance.
• Collaborate with cross-functional teams, including developers, product managers, and designers, to understand product functionality and requirements.
• Participate in test planning, estimation, and coordination of testing activities within an Agile development environment.
• Identify, document, and track bugs using QASE or similar test management tools.
• Verify bug fixes and ensure they meet the required specifications.
• Integrate testing processes with continuous integration pipelines (CircleCI) for improved development workflows.
• Ensure proper documentation of testing results and provide feedback for product improvements.
• Test cloud-based applications hosted on Google Cloud Platform (GCP), ensuring scalability and performance requirements are met.

Requirements:

• Experience in Manual Testing: Proven experience in manual testing across web, mobile (iOS/Android), and desktop (React Electron) applications.
• GCP Expertise: Strong knowledge of Google Cloud Platform (GCP) and testing cloud-based applications.
• Mobile Testing: Experience in testing mobile applications on iOS and Android platforms.
• Desktop Testing: Experience with desktop applications, particularly React Electron.
• Test Management Tools: Proficiency with QASE or similar test management platforms for documenting and managing test cases.
• Continuous Integration Tools: Hands-on experience with CircleCI or other CI/CD tools.
• Strong Analytical Skills: Ability to analyse complex systems, debug issues, and provide detailed reports.
• Attention to Detail: A meticulous approach to testing to ensure all edge cases are covered.
• Collaboration: Strong communication skills and ability to work in a team-oriented environment.

Qualifications

• Software Quality, Quality Assurance, and Software Quality Assurance skills.
• Experience in Manual Testing and Software Development.
• Strong analytical and problem-solving abilities.
• Knowledge of testing methodologies and tools.
• Effective communication and collaboration skills.
• Attention to detail and accuracy.
• Bachelor's degree in Computer Science or related field.
• Certifications in quality assurance are a plus.

Working hours: Part-time

3~4 days 8hrs/day, 8:30am to 5:30pm

KEY RESPONSIBILITIES

The Project Proposal Engineer plays a pivotal role in achieving project objectives within defined time and cost frameworks while ensuring full delivery scope and quality. This position involves a combination of technical expertise, project management, and customer-focused activities to support and drive sales. As a crucial link between the technical and commercial aspects of projects, the Project Proposal Engineer ensures customer satisfaction and successful handover to the Project Execution team.

Key Responsibilities

Collaborative Sales Approach

 Partner closely with all stakeholders to serve customers effectively and meet team sales targets.

Proposal & Quotation Preparation

 Analyze requests for proposals to understand project scope, technical requirements and customer expectations.

 Identify potential risks and propose mitigation strategies in proposals.

 Ensure proposals adhere to industry standards and compliance regulations.

 Utilize CEP and SAP systems to prepare accurate costings, quotations, and proposals for company’s products, services, and third-party packages.

 Terms & condition (T&C) review & negotiation

Customer Engagement and Technical Assistance

 Summarize customer specifications and create a Deviation/Clarification list.

 Participate in technical clarification meetings with customers, clarifying company’s proposed deviations.

 Handle inquiries via various communication channels, provide technical assistance and advice, follow up on quotations, negotiate terms, close orders, and maintain customer relationships.

Cross-Department Coordination

 Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations and proposals.

Order Processing and Verification

 Verify customer Purchase Orders, convert quotations into sales orders, and process orders using the SAP system.

Customer Service and Problem Resolution

 Deliver exceptional customer service, build strong relationships, resolve problems, and address complaints effectively.

Additional Responsibilities

 Perform any other tasks required by the Company to support its business strategy.

KEY REQUIREMENTS

 Diploma or Degree in Control/Electrical/Mechanical Engineering or equivalent

 At least 3 years’ experience in Instrumentation and Automation/Control Engineering

 Relevant Technical knowledge (Would be an advantage)

 Proven track records and experience with project proposal

 Enthusiastic, dynamic, and customer-oriented personality

 Systematic and meticulous

 Strong ability to work effectively within a team environment.

 Ability to handle multiple tasks simultaneously and prioritize effectively.

 Excellent communication skills, both written and verbal.

KEY COMPETENCIES

 Strong project management skills (PMP certification would be an advantage)

 Technical knowledge

 Effective communication and interpersonal skills

 Self-Motivated and Independent

 Strong problem-solving and decision-making abilities

 Customer-focused with a commitment to quality and satisfaction

Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Position: Electrical Engineer

• Working days & hours: Mon - Fri ; 815am - 530pm (OT is required)
• Location: Joo Koon (Transport from Lakeside / CCK / Joo Koon MRT)
• Salary: $3000 to $3500 + OT

Summary

• The engineer is responsible for supporting motor & generator services, transformer services and switchgear services.

Knowledge and Skill Requirements

• Diploma or Degree in Engineering with a minimum of 1 year relevant experience

Primary Responsibilities

• Take charge of maintenance, troubleshooting, repair, commissioning and replacement of machinery equipment and systems such as chillers, motors, switchgears, generators and transformers.
• Carry out testing for all types of protection and maintenance.
• Develop and maintain relations with supervisors, assistant supervisors and other department on engineering concerns.
• Identify and solve engineering problems as needed.
• Ensure works are done timely.
• Ensure all safety aspects of the team.
• Mentor and train up technicians.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Brief Description & Role

This position is responsible for testing, troubleshooting, and repairing RF components and systems. You will work closely with cross functional teams to ensure the quality and performance of RF equipment, ensuring that all devices meet the required specifications and standards.

Responsibilities

1. Conduct comprehensive testing of RF devices, nodules, and systems to verify their performance, functionality and compliance with industry standards.
2. Ability to read and understand circuit schematics, layout and diagrams.
3. Able to perform RF tests, analyze test data and produce detailed reports outlining findings, and recommendation for improvements.
4. Maintain and operate various RF Test equipment like Spectrum Analysers, Vector Network Analyser (VNA), signal generators, noise figure measurement etc..
5. To perform failure analysis and debugging PCBs to component level.

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

• 5 days (Mon - Fri 815am - 530pm)
• Location: Joo Koon (Transport from Lakeside / CCK / Joo Koon MRT)
• Salary: $3,100 to $4,000 (No commission. Petrol card, SIM card and phone, medical and AWS are provided. Bonus depends on company’s performance.)

Primary Responsibilities

• Identity and set up meetings with new prospects through the use of phone, emailing and outdoor visiting
• Engage in online market research to identify new leads and potential new market
• Prepare and deliver persuasive marketing materials on product developments and services
• Engage in negotiations and follow-up with potential clients
• Maintain engagement with existing customers
• Support the planning and execution of new marketing initiatives
• Draft and present monthly sales report
• Develop and ensure that sales goals are met
• Support accountant to secure payments from clients
• Perform ad hoc duties assigned

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279