Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of M&E work to meet the project schedule
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.
• Other ad-hoc duties when assigned

Requirements:

• Min Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical / Electronic / Mechanical) or equivalent.
• Min 3 years of relevant working experience M&E Services (ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection) in the related field is required for this position.
• Good knowledge of M&E specifications & requirements, especially in ACMV, Electrical, Plumbing/Sanitary Services.
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of Plumbing & Sanitary installation work to meet the project schedule.

• To supervise and ensure works are in accordance to the contract drawings and specifications

• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,

• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.

• Other ad-hoc duties when assigned

Requirements:

• Min Diploma / Degree in Mechanical Engineering.

• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage. • Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

• Reports to Package Manager
• Perform interface management between the Vendors, the yard and Owner
• Review and checks documents and drawings from the Vendors to ensure compliance with specification
• Ensure that yard drawings adequately capture Vendor’s details and requirements
• Monitor, control and report Vendor’s progress against the plan to ensure on time completion and delivery against the plan
• Coordinate the yard FAT procedure, review and approve Vendor’s FAT procedure
• Coordinate and attend FAT
• Coordinate and approve Vendor’s Packing list and coordinate delivery of the Vendor Package
• Perform periodic visit to site to confirm equipment readiness for installation, for completion and for vendor callouts
• To coordinate and perform inspection upon delivery
• Support site installation and completion of the Vendor Package
• Ensure that Vendor’s requirements are adequately carried out during installation
• Manage overall Vendor Call Outs
• Responsible for daily management and interface for Vendors Site Service Engineers
• Review SAT/ CTPs to ensure that test procedures are in line with Vendor’s requirements
• Lead / support site pre-commissioning and commissioning of the Vendor Package
• Support Commissioning Manager during the Commissioning phase of the Project
• Final documentation close out with Vendor
• Travel overseas for work / assignment as and when necessary or requested by your immediate Supervisor / Head of Department
• Any other assigned duties and responsibilities when tasked by immediate Supervisor / Head of Department.

Job Requirements

• Minimum Diploma in Engineering discipline or equivalent
• Strong interpersonal and communication skills, general interest mindset, ability to address conflict constructively
• Able to multi-task and able to work in a fast-paced environment
• Possess positive and willing to learn attitude
• Proficiency in MS Office Suite (Advanced Microsoft Excel)
• Minimum 5 years of experience in marine, offshore and renewable sectors
• Location: West - Pioneer

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an IT Maintenance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Provide technical assistance to clients when required.
• Support operations on a 24/7 basis, with rotating shifts.
• Diagnose and resolve technical issues promptly.
• Communicate complex technical information in simple terms to clients.
• Understand and manage client requirements.
• Collaborate with the support team to escalate unresolved issues to the relevant product vendors.
• Maintain close communication with vendors to improve and support product solutions based on feedback and industry trends.
• Continuously enhance knowledge in IT security products and solutions.
• All other adhoc duties as assigned.

Requirements:

• Minimum Nitec/Diploma or other related field of studies.
• Minimum 1 years’ relevant experience.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

• Position: Desktop Support Engineer (Band 1)
• Working Location: Tuasx2 / Jurong / Changi (Client Site)
• Working Days : 5 Days ( Mon- Fri)
• Working Hours: 8am-5pm
• Salary Range: $2,700-$3,200

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

In addition the Band 1 Technician will mentor and assist Band 0 technicians in their work and provide support to Band 2 Technicians in resolving tickets.

Benefits:

• Basic salary up to $2800
• Good career progression
• East Area
• Training provided

Job Scope:

• Perform troubleshooting and recovery on semiconductor manufacturing equipment to reduce downtime and ensure optimal performance.
• Assist in establishing recovery processes and procedures to enhance equipment operation efficiency.
• Conduct routine inspections and preventive maintenance on semiconductor tools and machinery, ensuring all equipment remains in top condition.
• Collaborate with engineering teams to analyse data and enhance recovery techniques.
• Document maintenance activities, recovery procedures, and equipment performance for quality assurance and compliance.

Job Requirements:

• Possess a bachelor’s degree in electrical/ mechanical engineering or related field will be a plus
• No prior experience required

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

• Handle schedule work in accordance with the master and detailed work program.
• Manage technical and engineering problems.
• Liaise with consultants for technical issues and organise site activities with subcontractors.
• Maintain quality standards and perform site inspections and resolve technical issues on time.

Requirements:

• Degreein Civil Engineering recognised by Singapore PE Board.
• Registered Resident Engineer with IES/BCA.
• At least 3 years of relevant working experience preferably in handling LTA projects.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job ID: 19229

• Location: Tuas West Road
• Working hours: 9am – 6pm
• Salary: up to $3,800 (Depending on experiences)

Job Description

• To perform troubleshooting, testing, commission of die cast machine.
• To perform planning, repair works, maintenance, and complete overhauling on-site/workshop
• Experienced in PLC is an added advantage

Job Requirement

• Candidate must possess at least Nitec/ Higher Nitec/ Diploma in Electrical/Mechanical Engineering
• Preferably with 3 - 5 years working experience
• Willing to travel oversea
• Self-motivated, able to work independently
• Class 3 driving license

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19229, Assist Service Engineer/ Service Engineer (Die Cast Machine)".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team player.

Job Responsibilities:

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job Requirements:

• Possess a Degree / Diploma in Civil Engineering / Structural / Architecture and related discipline.
• Experience in LTA-MRT project will be advantageous
• Proficient in Microsoft Office/Projects, Autodesk AutoCAD/Revit.
• Ability to keep a positive attitude in a fast-paced environment.
• Good attitude, good communication skills, and good team player.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Job Description:

• Oversee post-sales activities Cybersecurity products.
• Participate in project implementations
• Provide on-site implementation services, including testing, deployment, and documentation.
• Offer technical support to ensure customer satisfaction.
• Analyze and address customer queries by troubleshooting and consulting existing knowledgebase articles and known issues.
• Be available for 24x7 maintenance support calls on a routine standby basis.
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Bachelor’s Degree or Diploma in Cyber Security, Computer Science, Computer Engineering, or a related field.
• 1-3 years of relevant experience in IT, particularly in network support and administration.
• Knowledge and experience in networking, including routing and switching technologies.
• Capable of working independently as well as part of a team.
• Willing to work diligently and eager to learn about new technologies.
• Strong analytical and troubleshooting abilities.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Job Description:

• Manage team of the site supervisors
• Appointed by QP(S) to be full time on site carrying out the duties of the QP(S)’s roles and responsibilities as required by BCA
• Site supervision/inspection of construction works
• Liaise with all parties involved in the project
• Monitor and ensure all works carried out as per specification/approved construction drawings
• Maintain & control site records as per BCA requirement
• Attend site meeting with Authority's Representative and Authority's Appointed Consultant project staff and assist in preparation of the meeting minutes and presentation

Job Requirements:

• Minimum eight (8) years of post-graduate experience as a civil engineer, of which at least three (4) years of experience in heavy civil/ structural engineering works.
• Experience in Station will be required.
• Degree in Civil Engineering recognised by the PE Board and qualification accredited by Joint Accreditation Committee of IES/ACES as Qualified Site Supervisor as defined under the Building Control Act.
• Relevant working experience from LTA project is a must.

Job Description

1. Perform hands-on Marine/ Electrical / Mechanical / Chemical / Structure installation, Service & Maintenance and Repairs of Equipment / Instruments on outdoor field, canal, undergound, confine space, underwater, marine coastal

2. Involves working onboard vessel /work boat, canal, underground, river and field sites

3. Involve in integration of instrument / computer devices, programming, setup, configuration, testing and commissioning of remote access and control application.

4. Involve in instrument calibration, knowledge in chemical reagent

5. Planning maintenance schedule and product service report / analysis report / Maintenance Report

6. Involve in Ad-Hoc assignments as and when required

7. Willingness for Standby duties or work after office hour or during weekend and Public Holiday

Requirement:

1. Possess positive attitude to learn, has initiative and independent

2. Relevant educational qualifications in Marine/ Electrical / Mechanical / Structure Engineering (Degree/Diploma/ITE/NITEC)

3. Willing to do field work (outdoor sites, onboard vessel /workboat, underground, canal, water coastal, etc.)

4. Team player

5. No prior experience may also be considered.

6. Confident in Marine Environment

7. Self-driven and motivated individual with critical thinking skill

Interested applicants, please email detail resume to [email protected]

Regret to inform only shortlisted candidates will be notified

About ACP:

ACP is the leading provider of learning management systems (LMS), e-learning, website development, and ICT solutions. In our current day and age, the adoption of technology in jobs worldwide has enabled us to streamline job processes and increase organisational efficiency, all thanks to the power of the internet. As such, digital literacy is a crucial skill that must be imparted to the next generation, and we continuously strive to empower every individual to learn through technology in our borderless world.

As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.

Job Description:

● Work with the supporting vendors and government agencies to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
● Conduct research on emerging technologies that can optimize and accelerate the project delivery.
● Ensure all required testing documentation are in place as part of production preparation checks.
● Drive and advocate continuous improvement in testing practices and tools.

Job Requirements:

● Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
● Minimum 3 years’ experience in application exploratory testing and regression test automation
● Understanding of Web-based project test methodology, test environments, bug life cycle, and frequent code release deployment QA support
● Create, review and/or support test automation strategies and implementations
● Experience working with highly trafficked, scalable Web applications
● Troubleshooting/debugging skills
● ISTQB, CSQA, CSTP or other relevant certification
● Experience with Katalon Recorder and/or Katalon Studio or equivalent
● Advanced knowledge of common desktop and mobile browser technology

Responsibilities:

• Plan and schedule maintenance for ground support equipments and vehicles.
• Manage inhouse manning and outsourced contractors.

Requirements:

• NITEC in automotive engineering or related.
• Knowledge or experience in car/ vehicle mechanic.
• Possess with class 3 driving license would be advantageous.
• Comfortable working shift work.

Other information:

• Working hours: 6 days per week, rotating shift including overnight
• Location: Changi

We regret that only shortlisted candidates will be notified.

By sending us your personal data and/or resume, you are deemed to consent to AM Recruitment Pte Ltd or its agents to collect, use and disclose your personal data and/or resume for the purpose of processing and administrating this job application.

Registration No: R23117478 (Mandy Lim Teng Hong)

EA Licence No: 23C1821 (AM Recruitment Pte Ltd)

The exceptional EY experience. It's yours to build.

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

The opportunity:

EY DnA is the data and advanced analytics capability within EY Asia-Pacific, with over 500 specialist employees working across multiple industry sectors.

We implement information-driven strategies, data platforms and advanced data analytics solution systems that help grow, optimize and protect client organizations. We go beyond strategy and provide end to end design, build and implementation of real life data environments and have some of the best architects, project managers, business analysts, data scientists, big data engineers, developers and consultants in the region.

We are looking for a Data Engineer within the DnA team in our Singapore office. This role is offered on a flexible full time basis.

Your key responsibilities:

• Apply data mining, data modelling, natural language processing, and machine learning to extract and analyse information from large structured and unstructured datasets
• Develop and implement techniques and analytics applications to transform raw data into meaningful information using dataoriented programming languages and visualisation software.
• Visualise, interpret, and report data findings and may create dynamic data reports as well
• Design, develop, and maintain the organization's data architecture, including data pipelines, databases, and data warehouses.
• Develop and maintain ETL (Extract, Transform, Load) processes to efficiently move data from various sources to the data
• Implement data quality checks and monitoring processes to identify and resolve data issues in a timely manner.
• Collaborate with data scientists, analysts, and other cross-functional teams to understand data requirements and deliver data solutions that meet business needs.

Skills and attributes for success

• Experience in ETL, Data Engineering, Scripting.
• Knowledge and experience in end-to-end project delivery, either traditional SDLC or agile delivery methodologies (or hybrid approaches)
• Experience in a delivery role on Business Intelligence, Data Warehousing, Big Data or analytics projects
• Exceptional communication, documentation and presentation skills and stakeholder management experiences
• Experience in business intelligence, data warehousing/platform, and data strategy projects

To qualify for the role, you must have

• At least a Bachelor's degree in any of these faculties: Computer Science/Information Technology/Programming & Systems Analysis/Science (Computer Studies)
• Minimum total 6 years work experience in at least 1 of these job titles: (1) Chief Data Scientist (2) Data Engineer (3) Data Scientist (4) Head of Data Analytics
• Experience in development and maintenance of Data processing pipelines
• Experience developing machine learning workflows
• Work closely with business analysts to create data components
• Application packaging and deployment experience across DEV to PROD environments

Ideally, you’ll also have

• Dashboarding experience with Tableau / Power BI
• Experience in engaging with both technical and non-technical stakeholders
• Consulting experience and background, including engaging directly with clients

What we look for

• Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry.
• An effective communicator, you’ll be a confident leader equipped with strong people management skills and a genuine passion to make things happen in a dynamic organization.

What we offer

EY offers a competitive remuneration package commensurate with your work experience where you’ll be rewarded for your individual and team performance. We are committed to being an inclusive employer and are happy to consider flexible working arrangements, where this may be needed, guided by our FWA Policy.

Plus, we offer:

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

If you can demonstrate that you meet the criteria above, apply now.

To learn more about our service offerings, visit https://www.ey.com/en_gl/careers/what-you-can-do-here or subscribe to http://www.youtube.com/ernstandyoungglobal

To learn more about careers in EYSG, please visit https://www.ey.com/en_sg/careers or like us on https://www.facebook.com/eycareerssingapore

Senior /Design Engineer (C&S)

• A1 Main Contractor
• Full time permanent roles
• Large scale buildings/infrastructure projects

Job Responsibilities:

• Conduct design analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop engineering drawings and ensure specifications/regulations are followed.
• Liaise with Consultant, engineers and other departments to ensure that the design intentions are met.
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Degree in Civil Engineering from accredited Universities

For more information, please apply with a word format CV or contact Khai Lun at +65 9014 5741 or email me at [email protected] to have a confidential discussion on the position.

We regret that only short-listed candidates will be notified.

Registration No. R1984761
EA Licence No. 19C9622

What you will do

• APU Physical Design Implementation for APU partitions focus on MDLA/NDLA n5/n4/n3e/ process
• Physical VerificaTion to deliver clean APU partition gds N5/n4/n3e/ process
• Perform Timing Closure ECO for APU partition including PrimeTime timing check and twk timing ECO

What you bring

• Apr hands on for n5/n4/n3e process using Innovus and Fusion compiler EDA tool
• tcl/csh/perl/bash. programming skill
• Timing Analysis Debugging and Fixing skills
• Experienced N4/N3e process

The computer vision / image processing engineer is responsible for developing and implementing algorithms and software tools to process and analyse images for various object detection applications from multiple real-time mission-critical image sources, such as electro-optical, thermal imaging sensors and other sensors.

The job scope includes:

• Research various imaging systems and validate them.
• Using optical metrology techniques, calculate and calibrate cameras for outdoor real-time mission-critical applications
• Designing and testing image processing systems and components, such as filters, edge detectors, feature extractors, classifiers, etc
• Optimising the performance and accuracy of image processing algorithms using techniques such as parallel computing, machine learning, deep learning, etc
• Collaborating with other data scientists, engineers, researchers, and clients to understand the requirements and specifications of image-processing projects
• Document and present the results and findings of image processing experiments and analyses

Requirements:

• A bachelor's degree or higher in computer science, physics, mathematics or a related field
• Experience in image processing and/or computer vision, preferably outdoor systems
• Deep understanding of the imaging systems' sensor characteristics, optical metrology techniques and image signal processing
• Hands-on experience in the image processing pipeline. (Zoom and focus, auto white balance, camera colour conversion, colour space and colour management, etc.)
• Expertise in identifying diverse colour issues within intricate ISP systems and in precision tuning of parameters to achieve optimal image quality
• Knowledge of mathematical modelling, statistical analysis and image processing techniques. (Kalman filtering etc.)
• Proficiency in Python, C++, MATLAB or other programming languages
• Familiarity with popular frameworks and libraries for image processing and machine learning, such as OpenCV, TensorFlow, PyTorch, scikit-image or PIL
• Ability to work independently and as part of a team
• Excellent communication and problem-solving skills

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Permanent, 5days, Paya Lebar

Our client

MNC in air conditioning and humidification system solution serving high tech industry.

Responsibilities:

· To Conduct assessments of hvac designs to ensure that they meet the required specifications and standards within allotted timeline.

· To verify and prove that hvac systems in data centre build and function according to the requirement.

· To execute, lead n manages the commissioning process across all projects, from start-up, designing, construction, acceptance, functional performance and systems testing to operational turnover.

· Management of 3rd party commissioning agents, supplier, contractor, client to resolve any issues on site

· To perform project closeout and handover

· To produce Commissioning Report for each project.

Requirements:

· Diploma in Mechanical Engineer or related disciplines.

· 3 years’ experience in hvac data centre of commissioning management or hvac data centre design management

· Proficient in data centre safety and industry standards

· 3 years’ experience in physical M&E equipment in data centre (especially hvac0

· Speaks and write 2 languages.

Please email your resume ( in word document )to [email protected].

We regret only shortlisted candidate will be notified.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Project Engineer (IT)
• Working Location: East (Nearest MRT: Tai Seng)
• Working Hours: 5 days (Monday-Friday, 9 am to 6 pm)
• Salary Package: Up to SGD 3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up equipment for various systems and conduct testing and commissioning.
• Install electronic systems, including cabling and storage devices.
• Perform troubleshooting, repairs, and preventative maintenance on electronic systems.
• Manage projects and follow up with clients.
• Provide onsite support to diagnose and resolve technical issues.

APPLY NOW!!!

• Min. Diploma in IT or Engineering field
• Min. 1 year of working experience in Project Management or related field
• Familiar with Windows, Word, PowerPoint, Excel, and Access

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66287 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694