Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Candidates with no prior experience will be considered for junior position
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Role: Resident Engineer at C2D Solutions Pte Ltd

C2D Solutions Pte Ltd is seeking an experienced full-time Resident Engineer to oversee the technical aspects of construction projects.

Key Responsibilities:

• Manage a team of technical supervisors to ensure compliance with regulatory and client requirements.
• Collaborate with Professional Engineers, regulatory authorities, and contractors for planning, design, and supervision to solve site problems and ensure timely project completion.
• Implement and maintain the site supervision quality and safety assurance system.
• Supervise structural and geotechnical works, identifying any contractor non-conformities.
• Understand and interpret drawings and contract documents.
• Conduct regular site checks to ensure compliance with health and safety regulations per MOM.
• Attend site progress and technical meetings with the project team and client to address issues.
• Ensure proper management of site documentation, including meeting records, safety documents, and submissions.

Qualifications:

• Degree in Civil/Structural Engineering from a recognized university and registered as a Resident Engineer with IES.
• Minimum 5 years of experience in supervising industrial developments, with expertise in bored piling, precast structures, and structural steel.
• Knowledge of AutoCAD and BIM is preferred.
• Strong supervisory and leadership skills.
• Effective communication skills to interact with all levels of personnel.

This role is essential for ensuring high standards in construction project execution.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

This is a for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical / Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Process Engineer (Wet) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Wet process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Process Engineer (Backend) is responsible for development and establishment of production process.

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control. Review and maintain FMEA, Control plan, OCAP with cross-functional teams.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry
• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report

Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machines related to production
• Monitor process via SPC chart/real time monitoring system
• Work on continuous improvement projects
• Perform lots on hold and disposition
• Support in recipe setup and qualification for production
• Troubleshoot process-related issue
• Collect engineering data
• Prepare manufacturing documents
• Maintain good housekeeping in the production area
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines
• Process experience in Backend Process: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing
• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage
• Experience working in semiconductor manufacturing environment
• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc.
• Able to work under various shift pattern. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night

Responsibilities:

• Provide first-line support for technical issues via phone, email, or in-person.
• Diagnose and resolve hardware, software, and networking problems.
• Install, configure, and maintain operating systems, applications, and hardware.
• Monitor and maintain IT infrastructure, ensuring optimal performance and security.
• Assist in the setup and deployment of new hardware and software.
• Create and maintain documentation for processes, procedures, and troubleshooting steps.
• Collaborate with other IT team members to improve processes and resolve complex issues.
• Provide training and support to end-users on new technologies and tools.
• Any ad-hoc matter assigned by superior.

Requirements:

• Diploma in Information Technology, Computer Science, or a relate field and above.
• At least 2 years of proven experience in IT support or a similar role.
• Experience in system engineering, IT support, or a related role are advantageous.
• Basic knowledge of operating systems (Windows 10, 11 & Server) and office productivity software.
• Basic networking fundamentals.
• Experience with remote support tools and ticketing systems.
• Understanding of security principles and practices.
• Proficient in MS Office such as PowerPoint, Excel, Words etc

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

The Snr EUC Engineer manages the IT support function. He provides management to a group of IT professional and support staff and focuses on setting goals and priorities. He/She plans and directs the information processing activities of the organisation and coordinates the effective design, implementation and operation of management information systems and applications. He oversees the maintenance and upgrading of support systems and conducts on-site training to promote efficient operations.

Implement IT Support Service Plans

• Lead the implementation of support services across the organisation

• Define best practices and Service Level Agreements for the support function

• Establish performance and reporting measures to provide an effective and efficient level of service

Manage IT support Activities

• Identify actions to maintain or improve levels of service

• Advise the business on IT support metrics and capabilities

Oversee System Maintenance

• Prioritise activities to ensure continuity of service and prompt issue resolution

• Oversee the compiling of data for reporting purposes

• Review trends and patterns

• Plan installation of hardware equipment, software and maintenance agreements

• Recommend acquisition of new technology and software

Provide Incident Resolution Guidance

• Analyse enquiries to identify recurring user problems, recommend solutions, and to identify areas where service can be improved

• Respond to more complex, escalated enquiries from team members

• Evaluate results of investigation reviews

• Develop problem solving guidelines, checklists, or other materials to assist staff to respond to user problems that are recurring or routine

• Oversee disaster recovery planning and testing

Requirements:

• Have prior technical knowledge on End User Computing technologies, not limited to Desktop Endpoint Management, Win10 / 11 Security Patch Management, Asset Management, GPO policy management, Active Directory Administration, Win 7 / 10 / 11 migration (plus point), M365 administration (plus point), SCCM & Bitlocker (MBAM) administration (plus point), Software deployment management (plus point)

• Have vendor management experience or have experience managing subcontractors will be an advantage

• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 8+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Job Responsibilities:

1. Responsible for the secure operation and maintenance and development of the core transaction system database and related foundational platform systems.

2. Design and implement high availability solutions for databases to ensure 99.99% or higher availability.

3. Perform fault diagnosis and emergency response, analyzing and resolving database performance issues while accurately identifying root causes in a timely manner.

4. Optimize SQL, providing suggestions for improvement and optimization of problematic SQL queries.

5. Conduct forward-looking research on database technologies and promote their implementation and usage.

6. Provide technical consultation and system support services to project managers or system leaders.

Qualifications:

1. Over 3 years of work experience, including at least 3 years in dedicated SQL Server database operation management and technical support.

2. Proficient in using Performance Dashboard, SQL Profiler, and related diagnostic tools

3. In-depth understanding of indexing, physical and logical storage, execution plans, and blocking and deadlocking

4. Skilled in backup and restoration, DBCC, database clustering, mirroring, replication, and distribution, with a strong understanding of relevant Windows platform knowledge (clustering/AD domain). Candidates with experience in two or more database technologies, including SQL Server, will be preferred.

5. Familiar with Linux, Windows, IIS, SQL Server, Apache/Nginx, MySQL.

6. Knowledgeable about the architecture, replication, high availability, monitoring, and backup mechanisms of SQL Server and MySQL, with practical maintenance experience preferred

7. Proficient in SQL statements for SQL Server and MySQL, including writing stored procedures and designing table structures.

8. Detail-oriented, patient, calm under pressure, responsible, willing to research technology, and highly interested in DBA work, with good communication skills and a spirit of teamwork.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 5 years in the software development industry or server infrastructure setup
• At least 3-years’ experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.

Key Responsibilities:

• Work along with the development teams to onboard the Project onto AWS Platform
• Guiding the continuous integration, continuous deployment, continuous testing & continuous monitoring
• Work closely with the development team and operation team to ensure project delivery and maintain compliance standards.
• Set up, deploy, and maintain scalable, high-availability systems.
• Perform and automate provisioning and security hardening of systems.
• Set up and maintain CI/CD, automated testing, development, and delivery environments.
• Writing scripts/programs for service monitoring and health checks of systems
• Day-to-day monitoring, backup, deployment, and maintenance of systems

Requirements:

• Bachelor's or Master’s Degree in information engineering, information management or computer science
• Minimum 3 years in the software development industry or server infrastructure setup
• At least 1-year of experience working closely with infrastructure, Experience in Linux, Windows
• Network troubleshooting is a plus.
• Good hands-on experience in using AWS Cloud
• Experience with IAC / config management tools (Terraform, Ansible, Puppet etc.)
• Good understanding of hardware infrastructure systems (network switches, firewalls, router etc.) and Linux operating system
• Good understanding of DevOps Principles and practices
• Experience with cloud orchestration, configuration management and auto-scaling techniques
• Experience on building and developing CI/CD pipeline and workflow.
• Cloud & DevOps Certifications e.g., AWS Solution Architect, DevOps is a plus.