• Good Bonus - AWS + 3 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 3 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + 3 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ To manage and execute EMS/DMS SCADA projects and service contracts

§ Carry out routine and corrective maintenance, software enhancement, bug fixes, testing and commissioning to meet contractual requirements

§ Ensure smooth and proper execution of projects/contracts

Requirements:

§ Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognised Polytechnic/University

§ Preferably have some working experiences in executing /maintaining of SCADA and Substation Automation System.

§ Strong software skills.

§ Knowledge of UNIX OS and C, C++, Java programming language.

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 3 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Our client is a well-established MNC, market leader in the Water industry. They are looking for a Procurement Engineer to assist their Procurement team for the next phrase of their business. They are located in Central – easily accessible. This Senior Purchaser would be responsible for :

• Responsible for vendor management to ensure approved vendors meet the delivery, quality and cost standards
• Responsible for the negotiation to ensure and improve suppliers' price competitiveness, lead-time and on time delivery
• Ensure all necessary documents are in place
• Responsible to provide customers with solutions and internal cross functional teams, for cost effectiveness
• Responsible for materials planning
• Liaise with forwarder for shipping arrangment

Job Requirements:

• Diploma / Degree in any discipline
• Minimum 3 years of relevant experience in Oil & Gas industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Well Established Company
• Basic $3000 - $3500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Clementi
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Handling of measurement and detection equipment for military and homeland security
• Perform regular maintenance and carry out diagnostic analysis for trouble shooting and repair work
• Prepare basic reports
• Able to manage post-sales delivery of equipment
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 1-2 years of relevant experience
• Possess IT software installation and configuration skills will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5000 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Monday to Friday
• Working hours: 8.30am to 6.15pm

Job Responsibilities:

• Responsible for designing, calculating and drafting the electrical power system and instrumentals systems of Ships and Offshore Platform
• Interact with Clients, Classification and Statutory bodies and Vendors in the process of design
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in Mechanical or Electrical Engineering with minimum 2-3 years relevant experience in Marine Design
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3000 - $3500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Gul Circle (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Required to work within the Company workshop where there is no outdoor repair
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful
• Possess Class 3 driving license

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3200 - $4000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Serangoon
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Manage and provide supervision to the engineering aspects of a project
• Co-lead with the Program Manager and engineer the project from tool fabrication to mass production
• Coordinate project activities, monitor and ensure timely projects’ deliverables according to program manager’s project schedules
• Attend tool trial, part evaluation, analyse technical problem and propose solution to program manager
• Execute project plan and ensure project tasks are well carried out within stipulated time frame and budge
• Liaising internally with project team members and externally with customers on technical matters
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Nitec / Diploma level or relevant qualification
• Possess minimum 1-2 years working experience in injection moulding industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3500 - $5000 + Allowances + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 9am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Involve in conceptual and detailed design of mechanical/electrical/BMS engineering works
• Assist Manager in Project planning, budget cost control and execution of Project
• Coordinate with Main Con and other contractors for BMS installation work
• Supervise a group of subcontractors and ensure that works are executed within and acceptable standard of workmanship
• Prepare site progress report and necessary project documentation that may include method statement
• Ensure timely hand – over (delivery) of project while maintaining high quality standard of optimum cost (Cost effectiveness)
• Ensure that the relevant installation drawings are accessible at the point of use
• Review the nature of non-conformities detected in product/work and determine the disposition of the non-conformities
• Resolve technical issues relating to installation, commissioning, and testing
• Responsibility for the successful completion of the projects and meet customers satisfaction
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS will be a plus point
• Candidate without experience is welcome as Training will be provided

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Permanent, 5 days, Serangoon

Our client:

Data center Cooling Solution Provider

Pre tender Technical Support:

· Supports sales teams for the technical requirement, n when needed, engage with clients to assess technical requirements during tender stage

At proposal stage

• After receiving complete proposal information, to work with engineering & solution designer to generate proposal before submitting to sales team
• Follow up with the sales team for the outcome
• When need, conduct pre-sales site surveys to gather relevant information
• Work with the sales team to generate Bills of Materials (BOM)
• To provide costing.
• Work with sales team for carrying out experiment to ensure proposed solution fits client ‘s requirement.
• To bridge the gap between factory technical capability n client’s need.

Requirements:

• Bachelor degree in mechanical/electrical engineering
• 3 years’ experience in data center as mechanical design MEP (Mechanical Electrical Plumbing)/ ACMV (aircon mechanical ventilation /Hvac (Heat ventilation aircon) engineer

Added advantage:

• Thermodynamics (Heat flow) , fluid dynamic (Fluid flow)
• 2 years data center cooling solution pre sales technical support.

Our prestige client is looking for a professional and detail-oriented System and Network Engineer to join their team of IT professionals. In this role, you will be responsible for the maintenance and optimization of both hardware and software systems, as well as our network infrastructure. You will also provide technical support and troubleshoot any issues that arise.

Descriptions:

• Install, configure, and maintain hardware and software systems.
• Design, implement, and maintain network infrastructure.
• Provide technical support and troubleshoot any issues that arise.
• Monitor system performance and optimize systems as necessary.
• Manage and maintain Windows Server, Active Directory, and VMware systems.
• Configure and maintain storage systems, networks, and firewalls.
• Create and administer user accounts and permissions.
• Stay up-to-date with industry trends and technologies.
• Provide training and technical guidance to internal staff.
• Implement security measures and disaster recovery plans.

Requirements:

• Bachelor's degree in Computer Science, Information Systems, or a related field
• A minimum of 5 years of relevant experience in system engineering and/or network engineering
• Proficiency in Windows Server, Active Directory, and VMware
• Experience with storage systems, networks, and firewalls
• Strong communication and interpersonal skills
• Ability to manage multiple projects and tasks simultaneously

Tan Choon Hau

Registration No: R1988835

EA Licence No: 22C1376

Our client is from Oil and Gas industry. They are looking for a Production Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Our client is a global MNC, one of the most established pioneers in the Industrial Equipment industry. Due to business needs, they are now recruiting for Sales Engineer to be part of their Sales Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties:

• Upselling company's product range
• Expanding our customer base and acquiring new accounts.
• Conducting technical sales presentations to clients.
• Nurturing and maintaining strong client relationships.
• Collecting valuable marketing insights.

Requirements:

• Min Degree in Engineering or a related field
• Min 3 years of experience in Construction, Plumbing
• Must possess own vehicle

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R22108850

EA Personnel Name: Chan Mun Mun

Our client is a global MNC, one of the most established pioneers in the Chemical industry. Due to business needs, they are now recruiting a Quality Assurance Engineer to be part of their QA/QC Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Quality Assurance Engineer:

• Assisting in the research and development of Cement-based mortar formulations, including assessing alternative raw materials.
• Conducting tests on raw materials and finished products to ensure quality compliance.
• Validating product performance against industry standards and internal evaluation criteria.
• Ensuring products meet local regulatory standards.
• Providing manufacturing support, troubleshooting, and process improvement.
• Offering technical service, product trials, and training.
• Maintaining lab safety standards and workplace security.
• Any other adhoc duties as assigned

Requirements:

• Entry level are welcome to apply. Training provided.
• Experience with Dry Mixes is an added advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an Electrical Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsible of Electrical Engineer:

• Resolve plant faults by performing troubleshooting and conducting root cause analysis.
• Implement approved plant improvement projects and generate technical specifications for equipment parts and work services. Initiate requisitions when necessary.
• Conduct scheduled plant inspections based on the maintenance regime and carry out plant maintenance activities.
• Supervise maintenance contract works and develop work procedures for all maintenance tasks.
• Prepare comprehensive reports on a weekly and monthly basis, covering activities, overhauls, technical matters, and trips.
• Any ad-hoc duty as assigned

Job Requirements:

• Min degree in Electrical Engineering or equivalent
• Min 5 years of experience in similar industry/ high voltage power system

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Overview (Summary of the Role)

The Senior Network Engineer is responsible for analysing, designing, installing, configuring, maintaining and repairing of network infrastructure and application components. The incumbent performs a wide variety of evaluation, maintenance, installation and training tasks to ensure the computer network performance meets the satisfaction of the Company and users. The incumbent also provides direction, information and recommendations on network configurations and installations.

As a Senior Network Engineer, you'll will also provide design, configuration and escalated problem management in client environments of medium complexity. This includes defining system architectures for business opportunities during the project take on phase, designing and developing integration plans and create links for multi-platform, multi-vendor business solutions.

You'll also identify and develop technology related opportunities and integrate IT resources to fulfil project requirements. You would be able to compile technical specifications to explain the advantages and disadvantages of options leading to the final solution and are able to create alternative solutions as backup planning.

Responsibilities

• Responsible for the day to day operation and administration on network and security infrastructure; including performance, bandwidth monitoring and ensure uptime of all devices.
• Perform installation, configuration, troubleshooting and diagnostic on network and security appliances. Identify and correct malfunction issue if required.
• Responsible for Network related incident and change management.
• Responsible for the commission, de-commissioning and tech refresh of network devices.
• Manage the smooth delivery of network operations in accordance with stipulated Service Level Agreements.
• Provide firmware updates for network devices.
• Ensure network infrastructure complies with security policies.
• Prepare and maintain assets to ensure availability and update of capacity reports.
• Practice network asset management, including maintenance of device inventory, related documentation (Process and Procedural documents) and technical specifications information.
• Develop technical training materials and conduct training programs and educate engineers on basic technical details.
• Participate in technical refresh, deployment project, preventive maintenance and ad-hoc downtime.
• Perform vulnerability assessment and resolve vulnerability accordingly.
• Responsible for the configuration and support of backbones connection over DirectConnect (AWS) and ExpressRoute (Azure).
• Implement Network Projects: Participate in various network projects. This involves planning, implementation, testing, and documentation of network enhancements.
• Assisting with design and support of multi-server environments including cloud platforms such as - Azure, AWS (Amazon Web Services), VMware, EHC (Enterprise Hybrid Cloud), NSX (Network Virtualization and Security platform) by developing High-Level network designs (HLDs) and recommend best security practices.
• Monitoring and analysing network performance and offer support to troubleshoot issues related to a breadth of networking technologies including Cisco routers, switches, Palo Alto firewalls, and wireless solutions within the network infrastructure scope.
• Any other ad-hoc duties as required or assigned.

Requirements

• Bachelor's Degree or Diploma in Information Technology/Information Systems/Computer Science, Business IT, or its equivalent.
• Minimum 7 years of relevant working experience, with the last 3 years in large-scale network architecture design, deployment, and implementation.
• At least 5 years of experience in Network Operations Support, Administration, and implementation.
• Good knowledge of the following, but not limited to:

o Firewall technologies – Cisco ASA, Fortigate, Palo Alto (high availability, virtual firewall concept)

o IP load balancer

o Access, Distribution, and Core Switches

o Router configuration (high availability)

o LAN and WAN administration

o Wireless Controllers and Access Points

o Network Access Control Devices (ie. ClearPass Policy Manager or Cisco ISE)

• Knowledge of network documentation including network diagrams, configuration templates, SOP, technical presentations, capacity, and uptime reports as required.
• Must have in-depth and hands-on technical experience in routing and switching, and firewalls.
• Hands-on installation experience in Network (LAN, WAN, VoIP, WIFI, Wireless Controller, WIFI Access Point, Firewalls, Security Gateways, VPN, 802.1x protocol, VLANs, L2/3 Switch).
• Hands-on experience with routing protocols and control plane technologies like BGP, OSPF, OMS, LISP, IP SLA, PBR, OTV, ACI.
• Sound experience in SDN, Routing, Switching, and Wireless LAN (Cisco WLC and Meraki), Access Point, cisco Prime, NAC, and Cisco ISE-based wireless network deployments.
• Strong experience in design, architecture, configurations, and administration of Cisco ACI, SDWAN, SDA and traditional enterprise Networks.
• Strong experience with troubleshooting complex network issues and good hands-on well know tools like packet analyzers.
• CCNA certified (mandatory).
• Certifications in CCNP and CCIE preferred, CISSP and/or ITIL highly advantageous.
• Understanding wireless technologies like standalone and controller-based APs, 802.11a, 802.11b, 802.11g, 802.11n, 802.11i, 802.11ac and ax(wi-fi 6) standards, WLAN antennas, WLAN Security (“WEP”, WPA & WPA2 / AES, 802.1x, EAP, PEAP, LEAP, TKIP), BYOD, etc.
• Knowledge of Cloud technologies below will be an advantage:

o Experience in network automation via scripting (e.g. Python, Ruby) or tools (e.g. Ansible, Algosec, Chef, Salt, Chef, YAML). Familiarisation with “Network as code” or “infrastructure as code”, SD-WAN, and SDAccess concepts.

o Experience in Hypervisors network connectivity and Cloud connectivity (AWS, Azure, Google)

• Strong analytical and problem-solving skills, combined with the ability to provide a quick resolution to problems.
• Proficient in troubleshooting skills.
• Good exposure to network monitoring, configuration, traffic analysis, network discovery, and management tools.
• Experienced in leading customer facing consulting, assessment, and transformation projects.
• Able to guide the team in resolving network performance, capacity, downtime, and other P1-related issues.
• Effective communication skills.
• Self-driven and able to work independently.
• Willing to work after normal office hours during migration windows and project implementations

Your role

Our major Oil & Gas Client is looking for Instrumentation and Controls Engineer III who will be responsible for supporting an ongoing refinery and chemical project in Singapore. You will evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with project specifications, company standards, and regulatory requirements.

You will facilitate effective execution of discipline engineering and design routines that align with the project's goals, objectives, and procedures. You will assure accurate and timely communication among the Project Team and other Company functions on discipline engineering activities, progress, and issues.

• Execute control system life cycle management programs which include control system inventory, obsolescence plans, managing spare parts and upgrade/replacement planning
• Support control system maintenance and test planning as required, software upgrades, ESD testing, offline and online testing, and coordination of activities with/without plant shutdowns
• Support metering systems maintenance planning including for custody transfer, allocation, regulatory, and leak detection applications
• Support planning and coordination of tasks related to control system cyber security
• Review systems for compliance with company’s Industrial Control System Requirements (ICSR) to minimize cybersecurity threats
• Participate with multi-disciplinary alarm management efforts including alarm rationalization, prioritization, development of state based alarm schemes, and design / modification of alarm systems
• Review update and develop instrument and controls technical documentation / drawings including P&IDs, cause and effect, and control narratives
• Travel to production affiliate office/facility locations for onsite support or rollout of new global support initiatives

You are what we are looking for if you:

• Have minimum 15 years of experience in instrumentation and controls engineering in oil and gas and onshore/refinery projects
• Have experience in supporting EPC and Operator for instrumentation and controls engineering, design, and commissioning
• Have Bachelor’s degree in Electrical Engineering or related engineering specialty
• Are proficient in Schneider, Yokogawa, Honeywell, and Siemens system
• Have extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Are able to review, evaluate, and update cause and effect, P&IDs, logic and architecture diagrams and control narratives
• Have experience in selection, application, and ISA data sheet specification of hardware including pressure/ temperature /level instruments, control valves, shutdown valves, and fire/gas detection

Overview: -

• Jurong Island -Transport Provided: Jurong East/Lakeside MRT
• Basic Salary: $3000 to $5000 + AWS
• 5 Working days - 8.00am to 4:45pm
• ジュロン島 - 交通手段提供：ジュロン
• イースト/レイクサイドMRT 基本給与：$3000 〜 $5000 + AWS
• 週5日勤務 - 午前8時から午後4時45分

Your Responsibilities: -

• Improve communication with Japanese vendors for design reviews, project management, vendor oversight, engineering standards, and support for spare parts and maintenance.
• Facilitate communication between the client and vendors, coordinating equipment meetings, preparing materials, and negotiating new equipment/parts purchases from Japanese vendors.
• Audit Japanese vendors, arrange schedules, and facilitate information exchange between vendors and the client.
• Schedule and lead design review meetings, prepare materials, and create documents for approval.
• Communicate with vendors, control project budgets, ensure quality, safety, and schedule adherence. Collaborate for equipment handover checklists.
• Qualify new vendors, conduct audits for existing ones, and compare for quality and cost control.
• Translate UMTES into English, create USPES based on requirements, and share with relevant sections. Provide training.
• Propose equipment and process modifications for improvement. Coordinate with vendors and assess modification results.
• Support spare parts management and maintenance by coordinating purchases, helping resolve equipment problems, and providing training for troubleshooting.

• 日本のベンダーとのコミュニケーションを向上させ、デザインレビュー、プロジェクト管理、ベンダーの監視、エンジニアリングスタンダード、および予備部品とメンテナンスのサポートに対応します。
• 顧客とベンダー間のコミュニケーションを促進し、機器会議の調整、資料の準備、および日本のベンダーからの新しい機器/部品の購入交渉をします。
• 日本のベンダーを対象に監査を実施し、スケジュールの調整、ベンダーとクライアント間の情報交換をサポートします。
• デザインレビュー会議のスケジュール調整、資料の準備、および承認のための文書の作成を担当します。
• ベンダーとのコミュニケーションを行い、プロジェクト予算の管理、品質、安全性、スケジュールの順守を確認します。
• 機器引き渡しのチェックリストの作成に協力します。
• 新しいベンダーを認定し、既存のベンダーに対する監査を実施し、品質とコストの管理を比較します。
• UMTESを英語に翻訳し、要件に基づいてUSPESを作成し、関連セクションと共有します。トレーニングを提供します。改善のための機器およびプロセスの修正を提案し、ベンダーと調整し、修正結果を評価します。
• 予備部品の管理とメンテナンスをサポートし、購入の調整、機器の問題の解決、トラブルシューティングのトレーニングを提供します。

You will need: -

• Experience studying or working in Japan, demonstrating a solid understanding of Japanese working culture.
• Fluency in Japanese is necessary for communicating with our vendors in Japan.
• Diploma/Degree in Automation, Electrical Engineering, Mechanical Engineering, Chemical Engineering or equivalent
• 2-5 years of relevant working experience

• 日本での学習または仕事の経験があり、日本の労働文化に理解があることを示します。
• 日本のベンダーとのコミュニケーションには、日本語の流暢さが必要です。
• 自動化、電気工学、機械工学、化学工学または同等の分野でのディプロマ/学位を有しています。
• 関連する実務経験が2〜5年あります。

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

RESPONSIBILITIES:

• Gather and manage modeling requirements from the Product Development team and Systems Architecture team.
• Create 3D models and drawings of products, systems, and overall building layout in Solidworks.
• Evaluate MCAD-based product designs for completeness, integrity, and interface definition.
• Interrogate model-based designs for progress and compliance with quality and use-case objectives.
• Collaborate with relevant stakeholders (Vendors, A/E, TPMs, TLs) to support conversion of MCAD models.
• Deliver and maintain design documentation such as Drawings, Bill of Material, and manuals with revision control.
• Collaborate with relevant stakeholders (TPMs, TLs) to assess and document vendor design deliverables, integrity, quality, and status. Track model creation, coordination, and quality against deliverable dates and highlight schedule risks for TPM to escalate.
• As needed, support the development of configurable interface models based on MCAD product designs that ensure design integrity, with traceability to predecessor files in other software.
• Facilitate the distribution and use of product catalogs in 3D MCAD formats.
• Host design integration meetings, workshops, and model walkthroughs.

Qualifications & Experience:

1. Bachelor's degree or relevant experience in Mechanical Engineering or equivalent.
2. Minimum of 5 years of Engineering or Construction Industry
3. Solid understanding of fundamental physical and mechanical principles, manufacturing processes, development, prototyping, and testing.

Responsibilities:

• Manage and oversee tunnel construction activities on site.
• Coordinate and collaborate with project teams, subcontractors, and suppliers.
• Ensure compliance with safety regulations and procedures.
• Monitor and manage the progress of tunnel construction according to project schedules and budgets.
• Resolve any issues or challenges that may arise during construction.
• Conduct regular inspections and quality control checks on tunnel construction activities.
• Prepare and submit progress reports to project management.
• Ensure proper documentation and record-keeping of tunnel construction activities.

Requirements:

• Bachelor's degree in Civil Engineering or related field.
• Minimum 3 years of experience in underground civil works (tunnelling), Diaphragm Wall, Bore Piling is a plus
• Possess RE Registration with IES is advantage.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume. [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us

Responsibilities:

• Lead and manage the mechanical and electrical (M&E) design and engineering activities.
• Oversee the planning, design, and implementation of M&E systems for construction projects.
• Collaborate with architects, consultants, and contractors to ensure integration and coordination of M&E systems with overall project design.
• Review and analyze project specifications, drawings, and technical documents.
• Prepare and present technical proposals and reports to clients and stakeholders.
• Ensure compliance with regulatory requirements and industry standards in the design and construction of M&E systems.
• Manage and monitor project progress, budget, and quality of deliverables.

Requirements:

• Bachelor's degree in Mechanical or Electrical Engineering or related field.
• Minimum 4-6 years of experience in M&E design and engineering, preferably in the construction or design industry.
• Experience in managing and leading a team of engineers.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

We are looking for Systems Engineer (Application Infrastructure):

Planning

• Assist in Technology roadmap and planning
• Proactive Capacity Management & Planning
• Perform growth projections on infrastructure resources (Application servers, webservers, API Gateways and middleware).
• Proactive capacity and usage monitoring and plan for the required upgrade
• Perform capacity upgrades by scaling up of resources or scaling out in terms of addition of additional boxes
• Proactive Availability Management and Planning
• Perform availability review on infrastructure resources (Application servers, webservers, API Gateways and middleware)
• Identify and provide recommendations to achieve required improvements to meet business expected availability requirements
• Implement approved availability improvements
• Assist to plan and consolidate all change activities that required downtime where possible, in order to reduce the disruption time window to production
• Assist to plan hardware/software/firmware/middleware update, refresh or replacement to ensure they are of vendor/manufacturer supported version
• Perform Systems Security hardening
• Perform High Availability (HA)/Failover and Backup/Recovery configuration and setup
• Perform DRP/BCP (Disaster Recovery Plan and Business Continuity Plan) procedure build, update, verify and actual execution

System and Service Administration

• Perform monitoring health status of multiple environments 24*7
• Perform access control management
• Identifying and documenting dependencies and interfaces between network, systems, applications and databases to ensure the applications and associated Service Level Agreements (SLA) can be met
• Support periodic audit review exercises by providing the required information and to perform the remediation actions to close all audit findings
• Inventory, Assets and License tracking and updates to ensure compliance
• Maintaining technical documentation for configurations/setups
• Ensure the data integrity, configurations and data/applications synchronization of DEV/UAT/Production/DR or other established environments
• Ensuring the various systems interfaces, system flow and data exchanges between components and servers are functioning
• Ensure data replication (Application/database or other products) in sync for the UAT/Production/DR databases
• Preparation and setup of test environments for applications (setup/patching/upgrade/enhancements or new projects)
• Ensure proper backup and recovery of system, applications and data level backup successful (based on backup/recovery schedule)
• Ensure proper logs and archival, and manage the tape restoration test successfully at least once every 6 months.
• Perform scheduled periodic BCP/DRP exercises (switch over and switch back and testing)

Operations Support

• Perform after-hours emergency work as scheduled or required.
• Investigate issues within 30 min upon alert/activation for incidents
• Observe the daily behaviour trend and effectively take proactive actions to remediate issues
• Perform proactive incident prevention actions
• Incident Management - effective and timely participation, management and resolutionProblem Management
• o Effective and timely participation to resolve root cause and provide recommendation (s) to solve technical problems
• Release Management
• Perform necessary code changes/enhancement deployment release tasks required into UAT environments
• Perform post implementation review of release tasks and update completion status into ITSM tool
• Change Management
• To comply with the Change Release Procedure for Production, DR and UAT environments, as stated in the IT Change Management System Guideline
• Perform code changes/enhancement deployment (Production/DR environments)
• Perform periodic/scheduled maintenance work
• Perform/manage hardware (firmware)/Software version upgrade, patch fixes and security updates feasibility study and recommendation (inclusive of testing, change management, plan rollout and implementation)
• Operations Enhancement and Efficiency
• Proactive review of current operational tasks, processes and procedures (inclusive of BCP and DR). Identify areas of improvement or to streamline mundane tasks for the purpose of simplification and automation to improve operational efficiencies.
• o Review and propose new or better ways to monitor and perform health checks of current environment to ensure availability and effective/efficient issue resolution.
• Documentation
• Perform documentation review and updates to ensure procedures are maintained and current.

Project Management and Vendor Management

• Provide/review of solutions and options in terms of systems architecture and configuration
• Project manage infrastructure related projects (e.g. server refresh, new infrastructure services) when assigned
• Participate as project members for key application and/or infrastructure projects
• Provide Application Infrastructure support to Application team and various internal teams during solution/project deployments
• Manage vendors/contractors to ensure implementation is in accordance to stipulated requirements, service/system SLA is met and project deliverables are provided timely and sufficiently
• Assess and provide the infrastructure level requirements (e.g. system licenses, software and versions, etc.)
• Identify and assess risks, provide/review risk mitigating measures associated with the technical solutions and the migration plan
• Planning the infrastructure-level capacity (CPUs, memory, disk) requirement and to leverage on existing setup if possible
• Provide and/or assess migration plan from existing setup to new proposed solution
• Provide the 24x7 operation support plan after the project implementation transitions into operational phase
• Ensure required health-checks are updated

REQUIREMENT:

• Minimum of 3 years’ experience;
• Candidate with hands-on experience with RedHat, Linux, JBoss will be prioritise;
• Experience in supporting, maintaining, performance tuning and implementing Middleware applications and Linux system ;
• Degree in IT or Computer Science or equivalent education.

Role: Server Engineer

Location: Kallang

Type of Role: 12 months contract renewable -> convertible to permanent

Remuneration: Base Salary

Responsibilities:

• Install new and/or rebuild infrastructure, server, storage, hardware appliances, services, settings, in accordance to customer’s requirement that complies with audit processes.
• Maintain Standard Operating Procedure, together with the customer to ensure the processes are in line and up to date as necessary.
• Perform daily system checks and monitoring and to highlight if any abnormalities are found.
• Ensure that backups are running and send off the media off site as necessary.
• Create, Change, Delete users accounts as per request.
• Perform monthly and ad-hoc patching as necessary for the various servers that are covered under the contract.
• Perform ongoing performance tuning, hardware upgrades, and resource optimization as required. Configure CPU, memory, and disk partitions as required.
• Perform monthly performance reporting and capturing of server health statistics to assist with capacity planning.
• Work on any other server related requests as and when needed.

Requirements:

• Knowledge of Windows Server 2012/2016/2019.
• Knowledge of VMware or storage or cloud or Redhat.
• MCSE/MCSA/VMware certified would be advantageous.
• Office hours, but rotating standby to work on night or weekend tasks when required.
• Must be a team player.

For a confidential discussion, interested applicants please kindly send your updated resume.

• Implement and maintain backup and disaster recovery solutions for server and storage environments to ensure data protection and business continuity.
• Monitor system health, troubleshoot issues, and perform root cause analysis to identify and resolve problems.
• Collaborate with network engineers, system administrators, and other stakeholders to integrate server and storage infrastructure with network and security components.
• Stay current with emerging technologies and industry trends in technology to recommend and implement innovative solutions and improvements.
• Provide technical support and guidance to end-users, IT administrators, and helpdesk staff.

Requirements

• Bachelor's Degree in computer science, information technology, or diploma in related field.
• Proven experience as a system engineer specializing in Active Directory and Microsoft 365 administration.
• Strong understanding of Active Directory architecture, design principles, and best practices.
• Excellent troubleshooting skills and the ability to diagnose and resolve complex AD and Microsoft 365 issues.
• Proven experience as a VMware engineer or administrator managing large-scale vSphere environments.
• Strong understanding of VMware vSphere architecture, components, and features,including ESXi, vCenter Server, vSAN, and vSphere High Availability (HA)
• Relevant certifications such as Microsoft Certified: Azure Administrator Associate, Microsoft 365 Certified, VMware Certified Professional (VCP), VMware Certified Advanced Professional (VCAP).
• Experience with storage technologies, including SAN (e.g., Fibre Channel, iSCSI), NAS (e.g., NFS, CIFS), and RAID configurations.
• Strong communication and collaboration skills to work effectively with cross-functional teams and stakeholders.
• Knowledge of backup and disaster recovery solutions, including backup software (e.g., Veeam, Commvault) and replication technologies.

Please click on APPLY NOW to submit your resume.

We regret to inform that only shortlisted candidates will be notified.

EA License No. 01C4394

REG No :R1105286 (Ngiam Xinyi)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 6pm
• Location: Central
• Salary: Basic up to $3,500 + AWS + VB

Job Description:

• Install, modify, service, and upgrade equipment by maintenance and service agreements and technical specifications.
• Perform regular maintenance, preventive, and corrective maintenance on customer equipment to maintain equipment reliability.
• Maintain accurate service records, monitor the performance of equipment, and notify senior engineers of recurring problems.
• Understand and practice factory diagnosis and preventive maintenance activities.
• Understand solution items and make proposals to customers.
• Perform other related ad-hoc tasks as assigned by management from time to time.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Responsibilities

• Software Design, Development, and Maintenance (PC-based Equipment Programming)
• SECS/GEM software implementation and documentation.
• Evaluating and upgrading current software as needed.
• Handle machine setups and troubleshooting at the customer's location as needed.
• Direct the research, development, and application of next-generation software engineering technologies.

Requirements

• Minimum degree in computer science, electrical engineering, or a related field.
• At least 3 years of relevant experience in machine control software design and development.
• Experience in motion control and process control
• Strong in equipment PC-based programming
• Prefer experience with Vision System software. SECS/GEM standards knowledge

Interested candidates who wish to apply for the advertised position, please click APPLY to submit your resume.

EA License: 13C6305

Reg. No.: R22108000

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use, or disclose your personal information for purpose in connection with the services provided by us.