Job Description:

• Overseeing projects at one or multiple stipulated sites.

• Assist project manager is the execution of the projects.

• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

• Monitor and ensure progress of works are carried out according to project specification.

• Assist drafting team for design schematic drawing, layout drawing, P&ID drawing.

• Review and check drawing before submit to main contractor.

• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

• Support project manager in the administration of contract, claim, variation and any dispute arise.

• Raise MR and order material & arrange manpower for necessary works.

• Advise site team for work schedule and technical issues.

• Make sure project is carried out according to schedule.

• Responsible for site supervision and implementation.

• Responsible for ensuring implementing safety measures.

Requirements:

- Minimum diploma

- 3 years or above experiences in ACMV, especially in air-conditioning industry

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Description

• Perform troubleshooting, service & calibration work both at site & in-house
• Performs periodic, predict, preventative, repair and maintenance services for Company’s equipment and associated controls
• Overhaul, install, calibrate control valves and field instruments
• Supervising & managing of Sub-contractor to carry maintenance & servicing works
• Record servicing & maintenance data and generate service report

Requirements :

• Possess NITEC/Higher NITEC/Diploma in Mechanical / Mechatronics Engineering
• Communicate effectively, Customer orientation, Flexibility and self learning
• Can do attitude, Teamwork
• Energetic and good interpersonal skills
• Candidate without experience are welcomed to apply

We regret that only shortlisted candidate(s) will be contacted.

• 5 Days work week
• 9am to 6pm
• Walking Distance from MRT

Responsibilities:

• Oversee drawing management and control of technical documentation
• Assist project manager in planning and execution of project plans at site
• To understand and design electrical drawing and single line drawings
• Carrying out tests and inspections of Electrical/ Hydraulic Control Panel installations and equipment
• Planning routine Preventive Maintenance Activities and assisting the maintenance team
• Developing and implementing preventative maintenance procedures
• Preparing service & Site Progress Reports

Requirements:

• Diploma in Engineering or equivalent
• Min 2 years of working experience in construction industry
• Knowledge in PLC and WSH

For consideration, kindly submit your CV by clicking “APPLY Now” or email to "[email protected]"

**Only shortlisted candidate would be notified**

EA Reg. No: R1222284 | Kelvin Soh

We are now seeking Field Service Engineer to perform on-site installation of systems and equipment and ongoing preventive maintenance, repair, and calibration after installation. On a worldwide basis, our engineers represent the company while servicing, troubleshooting and supervising repair of NOV equipment. They shall be proficient to make necessary repairs and minor corrections to systems as required and provide a high level of customer service for product maintenance and in-field repair.

Responsibilities:

• Perform inspection, installation, commissioning, repair, upgrading, troubleshooting and related service work on offshore drilling platforms, land rigs, Shipyard or in workshops.
• Liaise with rig’s management during offshore assignment.
• Communicate with respective Managers for briefing and debriefing of service-related activities.
• Fill in necessary job reports, ISO work instructions and checklists required for all work in a timely manner.
• Interface with relevant departments to obtain a thorough understanding of NOV products and how they are safely operated, tested, calibrated and problems are resolved in a timely manner.
• Communicate field failures and feedback reports to the appropriate departments.
• Install, commission, troubleshoot, and repair NOV drilling equipment
• Provide training to other NOV personnel on the following systems and equipment as needed.
• > Analog and digital PLC based systems
• > Proprietary integrated control systems (Cyberbase, Amphion)
• > Variable Frequency Drives
• > Hydraulic/Pneumatic Systems
• > Electrical Systems (including various types of AC/DC motors)

Job Requirements/ Qualification:

• Bachelor's degree in related field or equivalent combination of education and experience.
• 5+ years’ experience in a related field is most welcome.
• Travelling on short notice is required. approximately 50% travelling.

Technical Competencies:

• MS Office products (Word, Excel, Powerpoint, Project)
• Ability to understand electrical schematics and PLC programs. It will be advantageous if the candidate is well versed in hydraulic / mechanical systems and also have an in-depth knowledge of the of the Drilling Equipment designed by NOV.
• Preferred working experience in Reliability, Availability, Maintenance and Safety (RAMS) and application of FEMCAs (Failure Mode, Effects, and Criticality Analysis) strategies for predictive maintenance (PM) and corrective maintenance optimization.

• Report to Construction Manager
• Manage and oversee construction activities near existing SPPG tunnel/GTP
• Coordination between client, consultant and sub-contractor(vendors)
• Ensure compliance with safety procedure and regulations
• Carry-out regular inspections and regular checks of concerned construction activities
• Resolve technical and engineering issue
• Ensure proper documentation (including Risk assessment/Method statement) and record-keeping of construction activities
• Ensure the activities comply with the local Authorities’ quality, environment, health & safety requirements and Clients’ General Specification
• Ensuring Permit to Work (PTW) is verified and valid for assigned duties.

Job Requirements:

• Degree in Civil Engineering from a recognized university, accredited by the Singapore PE Board
• Registered Resident Engineer with IES and valid certification in Singapore (Mandatory)
• Minimum of 1 year of Engineering experience
• 2 years of experience in the supervision of construction projects preferred
• Progress oriented, team player
• Technical expertise and knowledge in Civil Engineering Construction especially piling/RC works
• Proficient in Microsoft Offic and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height
• Good interpersonal skills and hardworking
• Location : Woodlands
• Project : Viaducts

Qualification:

-Degree in Electrical.

- 3-5 yrs experience at Electrical Equipment.

Job Description:

- project management: Liaise with contractor to set up charger including Router , LAN or SIM. Link API to platform.

- ⁠Repair & maintenance Troubleshooting , replacement of parts, liaise with factory; logging & data retrieval.

- ⁠planning & leads a team for charger maintenance. Offer service to customer.

- ⁠Apply LTA technical requirements .

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As device modeling engineer, the candidate is to analyze/interpret test results, develop and deliver SPICE models for Process Design Kits development. Candidate should have strong interests and willing to learn Semiconductor physics and able to work with various departments/customers to deliver final product or to resolve issues. The quality of our delivery plays an important role in a customer’s 1st time design success.

Your Job:

• Analyze and represent semiconductor devices with industry standard models.
• Applies knowledge of semiconductor physics and devices to evaluate and analyze test results
• Works closely with device and other modeling engineers to interpret test results and debug device and measurement issues
• Prepares reports summarizing results or to make technical recommendations.
• Work and collaborate other projects and/or assignments as needed
• Some basic programming is needed for data analysis. Preferred python

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Bachelor's in Electrical & Electronics Engineering or Masters degree
• Min 2 Years of Experience
• Open to considering candidates with no prior experience
• Please indicate % of travel 0%
• Fluency in English Language – written & verbal

Preferred Qualifications:

• Master's in Electrical & Electronics Engineering

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

Job Title: DCS Engineer

Work Location: Jurong Island

Expected Start Date: 01 January 2025

Responsibilities for this position may include but not limited to:

• Provides engineering design, troubleshooting and maintenance of Distributed Control System (DCS)
• Troubleshoot day-to-day process problems related to process control applications, controller tuning and batch receipes execution
• Supports Process Hazard Analysis and implements process changes through a Management of Change Process
• Maintains up-to-date documentations for the DCS
• Conducts training programs for operators on DCS & Batch Receipes
• Initiates and manages DCS hardware life cycle, software and process control network upgrades
• Leads / supports development and execution of control system pojects, and greenfield projects

Required Qualifications

• Bachelor's Degree in Electrical / Electronics / Instrumentation and Control / Chemical from an accredited university
• Minimum 5 years of related work experience in DCS in the refinery, petrochemical or checmical industry
• Strong analytical / trouble-shooting skills
• Good interpersonal and communication skills
• Able to work independently in a team and in a diverse enviroment.

Preferred Qualification:

• Knowledge and work experience in Honeywell DCS System (TPS/EPKS DCS and Experion Batch)
• Knowledge in SQL Programming / Power BI, Process Controls Domain & Network adminstration.

Intersted candidates, do drop me your resume @ [email protected]

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Advanced Networks & Sensors

Our Advanced Networks & Sensors business specializes in platform digitalization, advanced connectivity, and cutting-edge manufacturing. This diversity of capabilities presents a range of roles through which you can contribute to the development of innovative, secure, and patented products. Join our team and play a crucial role in developing tomorrow’s technology and connectivity solutions and services to sectors spanning defence, public security, government, and the commercial realm. Your work will have a global impact as we empower customers through advanced communications, intelligent sensors, and the deployment of AI-enabled Edge applications for mission-critical roles.

Together, We Can Make A Significant Impact

We are looking for a dedicated and skilled Assistant Engineer to support our maintenance team in ensuring the smooth operation of all machinery and equipment. This role is ideal for someone who has a strong technical foundation and is eager to learn and grow within a maintenance engineering environment. The Assistant Engineer will assist with routine maintenance, troubleshooting, and repairs while ensuring safety and efficiency in all tasks.

Be Part of Our Success

• Assist senior engineers in routine maintenance tasks and repairs on equipment
• Aid in diagnosing and addressing minor issues promptly to reduce downtime
• Help carry out scheduled preventive maintenance tasks to keep equipment in optimal condition
• Record maintenance activities accurately, including repairs, replacements, and inspections, under the guidance of senior engineers
• Ensure all work adheres to safety standards and regulations; actively maintain a safe working environment
• Assist in managing spare parts inventory, notifying senior staff of low stock and needed reorders
• Work closely with the maintenance and production teams to complete tasks and support the overall maintenance strategy

Qualities We Value

• Diploma in Engineering
• Ability to diagnose and repair complex systems
• Able to adapt and work under tight schedule
• Able to communicate effectively with customers
• Strong analytical skills to identify issues and implement effective solutions
• Possess class 3 driving license
• Working location is in Ang Mo Kio
• Singaporeans only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated
• Meaningful work and projects that make a difference in people’s lives
• A fun, passionate and collaborative workplace
• Competitive remuneration and comprehensive benefits

Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Position Summary

Independently to develop and apply Electrical & Automation design and knowhow on marine and offshore vessel to comply with Class and Technical specification requirements.

Tasks and Responsibilities

• Involved in all electrical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting

Job Requirement

• Minimum 3-5 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux and etc.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Know how to operate and draw in AutoCAD.
• Have knowledge in basic fire and gas detection.
• Have knowledge in basic HVAC electrical and instrumentation.
• Must know how to operate MS office (minimum Word and Excel).
• Minimum Diploma/Degree in Engineering or related field

Tasks and Responsibilities

• Overseeing the regular maintenance and repair of shipyard facilities, including buildings, docks, cranes, and other equipment.
• Planning and executing facility improvement projects, such as building renovations, dock expansions, or utilities upgrading.
• Ensuring all facilities adhere to safety regulations and standards.
• Developing and managing budgets for facility maintenance and improvement projects.
• Identify opportunities to improve energy efficiency in shipyard operations and implement cost-saving initiatives.
• Ensuring compliance with environmental regulations and implementing sustainable practices.
• Identify potential risks to shipyard facilities and operation processes.

Job Requirements

• 2 years of experience in heavy industry, preferably Shipbuilding industry.
• Read technical diagrams and schematics for work planning and issue resolution.
• Diagnose or troubleshoot faults in the plants and machinery.
• Carry out electrical wiring / mechanical installation and technical maintenance works.
• On-site installation, system setup, calibration, testing, onsite repairs and preventive & corrective maintenance.
• Ability to identify and resolve issues related to facility operations.
• Experience in developing and managing budgets.

Job Responsibilities:

1. Utilize wireless vibration sensors & cloud-based diagnostic analysis software to provide clients with remote diagnostic analysis of machinery health services.
2. Collaborate with client maintenance teams to develop and implement condition-based monitoring programs, and reliability-centered maintenance (RCM) strategies.
3. Continuously monitor asset performance through PHM remote diagnostic services, identify opportunities for improvement, and develop and implement reliability improvement initiatives.
4. Perform data analysis, failure mode and effects analysis (FMEA), and root cause analysis to identify potential failures, their impact, and underlying causes. Offer technical guidance and support to the stakeholders in optimizing asset reliability and performance.
5. Responsible for the vibration alarm setting and optimization, diagnostic models on the PHM system.
6. Collaborate with PHM solution engineers to perform data verification and analysis work.

Requirements: -

1. Proven experience (over 3 years) in reliability engineering & vibration diagnostic field, with the ability to independently diagnose equipment faults, and offline testing experience.
2. ISO Category III certification. Understanding of equipment reliability, predictive maintenance strategies, root cause analysis, and equipment data analysis.
3. Familiar with the principles and maintenance of rotating equipment (such as motors, gearboxes, fans, pumps, etc.)
4. Preferably with bachelor’s degree in engineering, or a related field (Mechanical, Electrical, Industrial, etc.), specializing in equipment fault diagnosis would add advantage.

Job Descriptions

• To do up products specifications for main contractors, architects, Consultants
• Establish Communicative Business Relationship With Prospective Clients at long term.
• Be the account manager for the projects

Job Requirements

• Candidate must possess at least a Diploma & Above, preferably construction related.
• Self Confidence, strong analytical mind, able to communicate with various professionals and different site personnel, friendly, team player & target oriented.
• Possess own car
• Required skill(s): MS Excel, MS Powerpoint, MS Word.
• At least 2 year(s) of working experience in the related field is required for this position.
• At least Project based type Sales Experience
• Handling Specifications

Benefits

• $600 transport allowance
• Can claim home season parking, parking fees and ERP charges pertaining to work can be claimed on reimbursement basis.
• Petrol Fleet card given
• Company mobile line, phone and laptop will be provided
• Annual leave starts from 10 days
• Entitled to quarterly profit sharing, have quarter sales target which set by HQ and once they exceed the sales target, they will have the profit sharing on the excess amount. Personal target will be set by HOD, once hit then is eligible for the profit-sharing pool. Team work is important.

Working Hours

• Mon - Fri, 5 days work week
• 8.30 - 18.00

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Job Responsibilities:-

1. Primarily responsible for the development of wireless vibration temperature data acquiring solutions for industrial enterprises and rotating equipment ends, managing the entire process from pre-sales solution design to project delivery for major client projects. This includes PHM requirement analysis, technical solution design, and product development.
2. Responsible for the on-site delivery management of industrial IoT projects, including on-site engineering design, network setup, system upgrades, equipment IoT integration and debugging, performance testing, and configuration of SaaS software functions on the cloud.
3. Conduct vibration analysis for rotating equipment using Vibration Analyzer. Analyse vibration data to identify potential issues and recommend appropriate corrective actions.
4. Communicate effectively with suppliers and customers regarding technical solutions.
5. Responsible for training and knowledge transfer to customers to ensure they can effectively use the PHM platform. Additionally, tasked with identifying new functional requirements from customers and providing feedback to product development for adjustments, maintenance, and optimization of existing features.

Requirements:-

1. Possess minimum 3 years of experiences in vibration condition monitoring-related fields, with familiarity in IoT, big data, artificial intelligence, cloud computing, and other industrial internet domains.
2. Experience in implementing vibration condition monitoring projects for industrial enterprises and system integration, with a background in rotating equipment diagnosis & maintenance, and industrial IoT project implementation.
3. Understanding of the IT/software integration industry, basic knowledge of IoT, and the product architecture of platform+SaaS applications.
4. Preferably have a Bachelor’s degree or above in engineering, with strong business communication and pre-sales solution development skills. Must have a self-driven business approach, be outgoing, diligent, and possess a rigorous professional demeanor.
5. Possess valid SG class-3 driving license

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

The role is based in Ang Mo Kio, Singapore.

Job Duties:

• Perform Calibration and Measurement of Dimension gauges and instruments as per WI using CMM, reference master, tester etc (on-site and in-house) with report and necessary administrative work
• Conduct routine maintenance and calibration of lab equipment as schedule and assigned
• Ensure proer delivery of service to customer(s)
• Help manager to manage day-to-day calibration work in the labs reference to ISO17025 standard, eg. Quality/ Job Planning/ Job Assignment/ Customer Requirements etc
• Any other duties as assigned by Manager/ Section Head/ Senior staff

Job Requirements:

• Diploma/ Degree in Aerospace/ Precision or Mechanical Engineering
• 3 years or more experience in Calibration and Measurement of Dimension is preferred
• Working knowledge of laboratory safety
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Prepares Primavera P6, to monitor the progress and substantiate time and cost entitlements.
• Prepares preliminary master schedule for pre-tender, tender and contract programmes.
• Prepares and maintains an intergrated schedule of drawings, procurement, construction, test & trials, integrated logistic plan using Primavera P6.
• Prepares baseline schedule which includes resource loading using Primavera P6.
• Identify descrepancies, delay and provide recovery schedule to Project Manager.
• Assist with the preparation of Extension of Time (EOT) claims, including presentations to clients.
• Prepares progress reports and progress audits, inclusing S-Curves, progress trackers and programming health checks.
• Prepares receovery programmes and presentations summarising key recovery strategies.
• Prepares detailed commissioning programmes
• Prepares baseline schedule which includes resource loading and cost loading.
• Provides advise on post-contract claims, reviews, disputes and litigation on programming.
• Any other ad-hoc duties as assigned by superior.

Job Requirements
• Degree in Civil Engineering or equivalent
• Min. 2 -3 years experience in the same field or equivalent
• Must have Primavera P6 Certificate
• Good team player and ability to work in a fast-paced environment
• Hands-on experience with Primavera for (2 to 4 years experience)

Business Understanding

At least (3) years of relevant experience in:

• Business Requirement Analysis
• Business Process and System Understanding
• Effective Communication with both business and technical users

Azure Data Engineering

At least (2) years of hands-on experience as Azure Data Engineer using:

• Azure Data Factory
• Azure Synapse Analytics / Datawarehouse

Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate;

Data Ingestion & Modelling

At least (3) years of hands-on experience in

• Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing
• Implementing Data Quality validation
• Good to have following skills
• Knowledge of Azure Databricks
• Data modelling in Azure Analysis Services using star and snowflake schema.
• Knowledge of writing DAX query to create measures & dimensions.
• Python Coding Experience

Others

Conversant in Microsoft Office products

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Job Descriptions

1. Manage the day-to-day sales activities for the semiconductor manufacturing equipment products (e.g. CMP tool) within the designated sales territory so as to achieve the sales target set by management.
2. Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
3. To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts. Manager is expected to make directions for the team to achieve these sales targets
4. To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products (e.g. CMP tool)
5. To make, develop and manage the localized marketing and sales program for the sales territory.
6. To communicate with the sales team to understand customer demands and offer sales support where necessary.
7. To work with EC to set the industry pricing level.
8. To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
9. To work closely with EC on the new accounts and new products, using the local team to win new contracts.
10. Establish customer rapport an acceptance
11. Any other duties as assigned by the management

Job Requirements

1. Knowledge of commercial and shipping documents (Incoterms)
2. Knowledge of the semiconductor manufacturing equipment products(e.g. CMP Tools).
3. Diploma/Degree in Engineering or equivalent
4. Good people skills with a pleasant personality.
5. Strong communication, interpersonal and customer service skills.
6. Excellent presentation and negotiation skills.
7. Ability to work independently as well as collaboratively within the team.
8. Must be prepared to travel overseas for training and to our customers’ location in the region as required.

Preferably to have Sales work experience in Japanese company in semiconductor industry for more than 5 years.

(Those without the relevant experience may be appointed as Senior Sales Engineer initially with a view to be upgraded later)

(Those with more years of relevant experience may be appointed to a relevant management position)

Benefits

• 10days AL
• AWS
• VB depending of the team and company performance
• Transport allowance

Working Hours

• 5 days (9am to 6pm)
• Monday to Friday