Responsibilities

• To supervise the project to ensure that the works are constructed in accordance to the project specifications, construction drawings and Building Control Act and Regulations.
• Manage and supervise the RTOs in performing their duties on site so that they can provide satisfactory supervision.
• Provide administrative control and maintaining proper records including site attendance, leave records, overtime records and inspections checklists.
• Review Contractor's submissions, work method statements and work demonstrations.
• Conduct regular site inspections and resolving site discrepancies to prevent delays.
• Attend site meetings, highlighting foreseeable problems and recommending possible solutions.

Requirements

• Degree in Civil and structural Engineering with at least 5 years' post tertiary experience in Singapore, of which 2 years must be supervise of LTA/ Commercial Building projects as RE (Tunnel).
• Must be Registered with IES/ACES as a RE (Tunnel).
• Project Location: Changi East
• The normal working hour for RE(Tunnel) is 56 hours per week

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsibilities:

• Responsible for the design and implementation of our CI/CD toolsuite.
• Maintenance of the CI/CD toolsuite and patching schedule.
• Work closely with the software engineers to automate their deployments and improve productivity.
• Work closely with the enterprise architects and IT security team to ensure compliance to their requirements.
• Troubleshooting of deployment errors, perform root cause analysis and implement corrective action

Requirements:

• 1-3 years of working experience working as a DevOps Engineer or similar software engineering role.
• Experience working with at least one of the CI/CD tools such as Jenkins, Octopus, ArgoCD.
• Good understanding of CI/CD best practices (environmental variable replacement strategies etc)
• Good understanding of containerization tools (Docker) and usage of image repositories
• Knowledge of container orchestration tools will be a bonus (Kubernetes)

Interested applicants, please submit your updated resume to [email protected] or click "Apply now" function.

We regret to inform you that only shortlisted candidates will be notified.

Shirley Monisha

EA Personnel no:R22106767

Manpower Staffing Services (S) Pte Ltd

EA License No.: 02C3423

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

AI Singapore (AISG) is a national AI programme launched by the National Research Foundation (NRF) to anchor deep national capabilities in Artificial Intelligence (AI).

The programme office is hosted by the National University of Singapore (NUS) and brings together all Singapore-based research institutions and the vibrant ecosystem of AI start-ups and companies developing AI products to perform use-inspired research, grow the knowledge, create the tools, and develop the talent to power Singapore's AI efforts.

The candidate will join a team of AI scientists, apprentices, data and software engineers/apprentices. With the team, he or she will experiment and build AI solutions that can help Singapore companies improve their businesses using AI.

The Senior Engineer/Tech Lead will be expected to provide technical leadership, drive collaboration with cross-functional teams within AI Products to design and resolve complex issues, engage stakeholders, manage, mentor and guide junior engineers in the projects.

Duties and Responsibilities

• Architect and develop scalable and reliable software and system applications/frameworks using engineering best practices and AI technologies
• Drive and maintain engineering, coding and DevOps/MLOps/CICD best practices, and documentation standards
• Work closely with Product Manager(s) to engage stakeholders, scope and drive product deliverables through Agile methodologies
• Utilise problem-solving skills to address and resolve user issues, with a focus on empathy
• Drive collaboration with cross-functional teams within AI Products to design and resolve complex issues
• Keep abreast of, and be able to evaluate application of technologies and trends in software development best practices and architectures (in software / AI)
• Manage, mentor and guide a team of engineers in the projects
• Contribute to community engagement activities such as sharing via technical session meet-ups and article write-ups, and participating in discussion forums

Qualifications

1. Degree in computer science, machine learning, AI, and other related fields
2. Experience in applying software design patterns to build scalable and reliable software systems
3. Experience in developing, deploying and maintaining production systems/APIs on cloud platforms such as AWS, Google Cloud, or Microsoft Azure
4. Experience in AI/Machine learning frameworks such as Tensorflow and Pytorch
5. Experience in driving software development using Agile methodologies
6. Experience with leading other engineers in a software development project
7. Experience with applying best practices to source code repository management
8. Previous working experience in Large Language Models will be advantageous
9. Previous experience in contributing to open-source projects will be advantageous
10. Data story-telling, information visualisation/UX and technical writing skills

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

This is a support position in the Dealing Support team. The staff will report to the Dealing Support Manager, he will work closely with all technology teams across the organisation.

Responsibilities:

• Contribute to the overall success of the Dealing Room Support, ensuring specific individual goals, plans; initiatives are executed/delivered in support of the team’s business strategies and objectives.
• Ensure all activities conducted are compliant with governing regulations, internal policies and procedures
• First and second level technical system support to all production systems being used by the users
• Manage and maintain the currency of all issues in a manner which provides high quality support services to its users
• Liaise with second and third level support when applicable and provide recommendations to management with regards to resolution
• Provide effective day-to-day end user technical support to all the trade floor users on production systems including PCs, printers, applications and trading phone systems
• Perform PC refresh, plan and deploy for new hire, installation of equipment, PC moves service request within SLA and ensure assets tracking is updated
• Record and maintain assets inventory system
• Must accurately record, update ticket in ITSM system
• Prepare and update technical documentation
• Determine the best solution based on the issue and details provided by users
• Identify and escalate business and technical challenges
• Communicate with other technical teams, clients and managers in a professional manner as situations arise, and at regular intervals ensuring that all parties involved are kept up to date at all times
• To succeed in this Dealing Room/Trade Floor Support role, the staff needs to have strong end-to-end knowledge of infrastructure, desktop, trade floor/dealing room and market data with any experience working within financial services being desirable.

Qualifications:

• Experienced and skilled working with Wintel desktops/laptop
• Microsoft Office: Advanced of Word, Excel, Access and PowerPoint
• Experienced in Market data systems: Bloomberg and Thomson Reuters Eikon
• Experienced in Trading systems: Thomson Reuters FX Trading, EBS, etc
• Basic TCP/IP networking knowledge and troubleshooting skills
• One to three years' technical work experience
• One to three years' trade floor support experience is preferred
• ITIL certification preferred

To apply please click the Apply button or send us your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is undergoing a growth phase and are on the lookout for talent. Applicants are encouraged to follow Percept Solutions on LinkedIn @ https://www.linkedin.com/company/percept-solutions/ to stay up to date on our upcoming roles and events.

• Prepare PLC program, SCADA software and conduct simulation tests in office. Support maintenance of existing SCADA systems and PLCs.

• Install instruments based on hook-up drawings.

• Conduct Factory Acceptance Test (FAT) for panels and do On-site commissioning. Install the hardware and carry out all the tests. Create test reports and submit to customer.

• Attend weekly progress meeting with customer and report progress. Conduct Toolbox meetings.

• Support customer through remote desktop or phone call for emergency issues at site

• Prepare Operation & Maintenance manuals for projects

• Attend company internal meetings and present on progress of projects.

• Good Technical Experience in Electrical, BMS, Process Instruments & Fire Alarm systems

• Prepare and Submit BOQ and Quotation for New Tender jobs and Additional works

• Prepare detail work schedule, site organization and

manpower mobilization plan

• Prepare MSRA for all work activity.

• Submission of Material Catalogue and Samples and Arrange RTO Inspection.

• Prepare Electrical, Instruments & Control cable Schedule

• Arrange Work place daily activity for team members, and arrange and order Tools and Materials.

• Prepare work Progress daily, weekly report & Minutes of meeting report

• Arrange RTO site inspection and testing report as per customer requirements

• Prepare and submit As-Built Drawings with PE Endorsement

• Verify and approve the timesheets of project technicians.

Job Description & Requirements

NACT Engineering provides tethered drone systems for drones of all sizes and use-cases. Our intimate knowledge of robotics systems places us at the forefront of a burgeoning mechanical revolution. As a company at the cutting edge of engineering and robotics, we are looking for a suitable candidate that will push NACT forward as a bespoke drone solutions provider for our clients in the APAC region.

Roles and Responsibilities

• Monitor the functioning of all equipment and report any problems or substandard condition to the supervisor.
• Ensure all log books are maintained according to standard operating procedures.
• Perform equipment assembly according to engineering drawings and guidance from engineers.
• Perform cleaning of all parts as per established cleaning procedures.
• Perform pre-assembly activities such as cleaning and lubricating.
• Conduct product testing and performance testing and record the results.
• Perform final checks and adjustments for any defects to ensure high quality products.
• Perform installation, repair, inspection, reassembly, replacing, refitting, and adjusting products as required.
• Order and stock materials and supplies to avoid materials shortages.
• Receive, unload, unpack and transfer materials to different work stations.
• Develop preventive maintenance procedures to avoid any breakdowns and failures.
• Maintain work area to be clean, safe and orderly.

Job Requirements

• Relevant qualifications in Electrical, Electronic and Robotics Engineering/ Mechanical Engineering or Aerospace Engineering
• Fresh graduate welcome to apply
• Independent and initiated
• With a “can do” attitude and ability to innovate around challenges
• Willing to learn new industry techniques
• Salary package will commensurate with experience and competency

Highlights of working at NACT

• Many amenities available along Alexander Road
• Competitive compensation package remunerated based on skill and experience.
• High level of autonomy on the job with training opportunities provided for upskilling and learning
• Open culture and collaborative environment

Job Description & Requirements

· Be responsible for managing day to day lifting operations for the project.

· To coordinate and oversee all lifting operation within the work site ensuring compliance with WSH Regulations & project’s HSE procedures.

· Adhere to the Company's Health, Safety & Environment policies, procedures and standards.

· Coordinate and supervise all lifting activities and ensure that the lifting operations are carried out in a professional, safe & environmentally friendly manner at all times.

· Ensure lifting equipment and lifting accessories are fully inspected, certified and maintained to a high standard.

· Ensure all relevant lifting equipment certification are recorded accurately for input to the Company's data recording system.

· Ensure that the ground conditions are safe for any lifting operation to be performed by any mobile/crawler crane

· Work closely with Lifting Supervisor and the Safety Department to identify specific training needs.

Requirement:

· Minimum 5 years of Engineering Experience with Degree in Civil Engineering or its equivalent

· Proactive, independent, able to work with minimum supervision and also work well in a team

· Must have a Lifting Engineer certificate from The Institute of Engineers Singapore, 5-Day Course for Appointed Person - Lifting Operations

Job Description

• Industry/ Organization Type: Marine Equipment Wholesaler
• Position Title: Electrical Engineer/Service Engineer (Electrical)
• Working Location: Tuas West
• Working Hours: Monday – Friday, 8 am – 5.30 pm (One Saturday per month, 8 am – 12 pm)
• Salary Package: Up to $3,300 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Carry out testing and commissioning related to marine propulsion systems, power generation systems (Marine and Land), deck machinery, etc.
• Able to perform hands-on fault diagnosis, troubleshooting, and maintenance of marine systems/components in workshops and on-board vessels.
• Must be willing to perform hands-on work in mechanical repairs, installation, and removals.
• Able to read and understand engineering drawings (Electrical and pneumatic).
• Provide support to the project team on the implementation of new projects.
• Provide technical support to customers.

APPLY NOW!!!

• Minimum 2 years of related experience.
• Minimum Higher Nitec in Electrical Engineering, preferably Major in Power.
• Proficient in Microsoft Office.
• Candidates with experience in Electrical Control Systems are preferred.
• Comfortable with travelling (Anchorage/Local/Overseas) on short notice and at odd hours.
• Comfortable with working outdoors and onboard.
• Inexperienced candidates are welcome to apply, as training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65623 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing / Automation
• Position Title: Mechanical Design Engineer / Mechanical Designer
• Working Location: Woodlands
• Working Hours: 5 days, Mon – Fri (8:30 am – 6 pm)
• Salary Package: Salary up to $3,000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop mechanical solutions for factory automation.
• Conceptualize and create effective automated systems.
• Work independently to bring mechanical designs from concept to completion, ensuring functionality and efficiency.
• Apply your knowledge of Inventor/SolidWorks and 3D software to create detailed mechanical drawings and models.
• Enhance and refine existing designs to optimize performance and meet specific project requirements.
• Conduct regular design reviews to ensure alignment with project goals and standards.
• Provide technical support and guidance to ensure the successful implementation of mechanical solutions.
• Adhere to established quality and safety standards throughout the design process.

APPLY NOW!!!

• Diploma graduate in Mechanical Engineering or related field.
• Minimum 1 year of relevant working experience in an automation factory setting.
• Demonstrated interest and passion for automated system design.
• Proficiency in design software such as Inventor and SolidWorks, as well as 3D modelling software.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65648 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

You’ll join the Data Intelligence team and perform collecting, visualising and mining generated data from the pipeline of a payment-related system.

Responsibilities:

• Improve payment performance and drive business growth;
• Develop data pipelines and participate in the standard definition of data development;
• Build data quality system and complete data monitoring/verification process;
• Develop data-related product requirements, and be able to independently understand requirement, design schemes, and implement.

Qualifications:

• Bachelor's degree or above in Computer Science, Statistics, Mathematics or other related majors;
• At least 2 years of experiences in data engineering;
• Proficient in at least one programming such as Python, Java, Scala, Go engineering background and interest in data;
• Prior experience with writing and debugging data pipelines using a distributed data framework (Hadoop/Spark/Flink/Storm, etc.);
• Familiar with OLAP engines (Hive/ES/Clickhouse/Druid/Kylin/Doris, etc.);
• Familiar with data warehouse architecture, data modelling methods and data governance; enthusiastic about data mining,business understanding and abstraction capabilities;
• Proficient in databases, SQL/ETL development ability;
• Experience in real-time data warehouse development.

To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

*General Description*

• Provide first level technical support to end-users for desktop and laptop hardware, software basic infrastructure, and network issues.
• Diagnose and resolve desktops, laptops, printers, peripherals, basic infrastructure, and network connectivity issues.
• Install, configure, and maintain desktop operating systems, applications, and network drivers.
• Perform preventive maintenance, upgrades, and software installations on desktops, laptops, and network devices.
• Follow ITIL processes for incident, problem, and change management.
• Assist with basic infrastructure and network troubleshooting, escalating complex issues to the appropriate teams.
• Maintain accurate and up-to-date records of all desktop, infrastructure, and networkrelated activities.
• Ensure compliance with IT policies and procedures.
• Assist with the management of the asset inventory for desktops, laptops, and network devices.
• Provide training and support to end-users on the use of desktops, laptops, and basic network connectivity.
• Any other task assigned by reporting manager or team lead.

*Work Experience Requirements*

• 3 years of experience in desktop support, maintenance, and basic infrastructure/network troubleshooting.
• Basic understanding of infrastructure and network concepts, including TCP/IP, DNS, DHCP, and network protocols.
• Strong technical knowledge of desktop operating systems, applications, and hardware.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and customer service skills.
• Ability to work independently as well as in a team environment.
• Flexibility to work outside of normal business hour

*To provide technical support to Chinese-speaking end-users. Proficiency in Chinese Mandarin is a must.

Responsibilities

• Provide L2 operation support including investigation of the issues reported and ensuring the issues are fixed as per user requirement

• Monitor application health and generate service and maintenance reports

• Assist and involve in the system integration testing (SIT) and user acceptance testing (UAT) prior to production implementation of changes.

• Assist and involve in change management process including Change Approval, Implementation, Testing, Deployment and verification

• Assist and involve in server maintenance, system accesses, systems monitoring, backups, patching and daily health check

• Maintain and implement tools to enhance software development and operations workflow

• Maintain, implement and troubleshoot software features in products

• Analyse data and test the integrity of systems to ensure production applications and services are operating optimally

Requirement

• Degree in Computer Science, Information Technology or equivalent experience

• Experience in programming language, such as Javascript and Python

• Experience in Linux and Windows systems, and protocols TCP, DNS, TLS/SSL, HTTP

• Experience in software version control using Git

• Good problem solving and analytical skills to resolve technical problems

• Experience in application monitoring, maintenance and troubleshooting is a plus

• Experience in web application development is a plus

Responsibilities :

· Develop or prepare planning for assigned projects.

· Liaise and coordinate with client, consultants, authorities, sub-contractors and etc.

· Liaise with utility agencies for any advance diversion work.

· Supervision of pipe laying and pipe jacking works.

· Preparation of daily jacking record and progress report.

· Provide engineering support in tendering of new project.

· Performs design calculations, assist with budget review.

Requirements :

· Possess a degree in Civil Engineering recognised by Singapore Professional

Engineers Board

· Minimum of 5 years of experience in pipe laying and pipe jacking works.

· Experience with AutoCad.

· Possess Class 3 driving licence.

· Able to work independently.

Responsibilities

· Responsible for the service management in the maintenance services

· Prepare and maintain project execution plans, and track all activities against the plan, providing regular and accurate reports to internal management and customer management

· Deliver quality outputs based on defined processes, review project performance and take timely corrective actions where necessary to ensure that project performance targets are achieved; identify and mitigate risks before they seriously impact the project delivery

· Monitor and control allocated manpower, associated revenue costs and all capital costs against the project budget

· Provide effective leadership to the project teams and ensuring that the team members are motivated, and developing their technical competencies and knowledge base

· Participate in client / partner contract negotiations and pre-sales solutioning support to sales team

· Manage a team and ensure SLA are fulfill

Requirements

· Degree in IT / Engineering, or diploma with years of experience equivalent

· At least 5 years of experience in managing large-scale system and engineering integration projects and cross-functional delivery teams

· Experience in turn-key development, implementation and maintenance of large-scale, multi-platform, multi-vendor systems in the IT and engineering domain

· Large-scale program management of multi-service line teams, including strong project management and communications skills, service delivery, client relations, planning, scheduling, budgeting, financial management, resource management, quality assurance and situational negotiations

· Proven track record in managing multi-million dollar projects in the government and/or commercial sectors

· Proven record of successful staff management in the area of leadership, staff motivation, performance appraisal, professional development and recruitment

· “Hands-on” attitude

· Good presentation skills, communication, negotiation, interpersonal skills and customer-service orientation

· Knowledge of Voice switching system will be a plus

· Professional project management certification (e.g.. PMP, ITIL, etc.) is preferred

· Preferably with Class 3 driving license

· Working location is in Ang Mo Kio

• This is a 2 years’ direct contract

· Singaporeans only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for designing new products and processes
• Responsible in identifying areas for improvement, maintaining high levels of manufacturing and product quality
• Responsible for ensuring cost-efficiency and conformance with regulatory standards.

Requirements

• Min Degree in Electrical & Electronics/ Mechanical/ Electromechanical/ Mechatronics/ Optics and Photonics Engineering or relevant
• Min 2 years of working experience in manufacturing/ production industry
• Experience in optics/ lasers/ optical microscopic imaging/ multi-channel fluorescence system used in analytical equipment is an added advantage.
• Experience in using multi-meter, function generator and oscilloscope.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Provide pre and post technical support to customer on machine vision application.
• Estimate and qualify new products.

Requirements:

• Diploma in Electrical/Optics Engineering or equivalent
• At least 3 years of experience on machine vision application.
• Knowledge of camera/lens/optical

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Salary: $4,300 Basic + Transport Allowance ($1,200 with own car / claims if without) + OT Pay + Standby Allowance $350
Work Days: 9am to 5:45pm from Mon to Fri
Work Location: Paya Lebar (near MRT)

Responsibilities:
• Responsible for all preventive and corrective support functions necessary to ensure high level of customer satisfaction with company’s range of products.
• To plan corrective and preventive action visits for local customers.
• Provide technical support to local customers to ensure customer needs are met.
• Adhere to procedures and processes to ensure department’s KPI are met.
• Report issues and customer feedbacks to his supervisor or regional support team on a monthly basis.
• Review and maintain spare parts to support operations.
• Required to provide 24 hours standby for local customers on a weekly rotational basis.

Requirements:
• Diploma / Degree in Biomedical / Mechatronic / Electronics Engineering or equivalent
• At least 3 years of field service work in medical related equipment or in vitro diagnostic device
• Proficient in Microsoft office applications
• Good communication and interpersonal skills, resourceful, analytical, strong trouble shooting skills, customer focus, team spirited with positive working attitude
• Maintain at all times the highest standards of professional and personal conduct when interacting with internal external customers
• Willing and able to be on standby 24/7 for 2 weeks in a month (with standby allowance and overtime pay)

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Current salary & Expected salary
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
www.united-personnel.com

EA Licence No.: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

1. Work on construction site supervisiong landed residential housing projects.
2. Planning, scheduling & control of manpower & material.
3. Prepare works program, schedulling, monitoring progress and prepare progress reports.
4. Manage group of construction workers.
5. Supervise subcontractors and conduct QC checks.
6. Prepare shop drawings, method statements, proposals & technical submissions.
7. Knowledge & experience in AutoCad and MS Project.
8. Implement site safety measures & controls and liaise with Authorities.
9. Implement covid safe management measures.
10. Attend meetings and liaise with clients & consultants.