Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibility:

· Liaise with the relevant stakeholders (e.g. Sales Managers or Proposal Team) to obtain information required for the submission of Tender/Request for Proposal (RFP)/Request for Quote (RFQ)

· Obtain the necessary approvals and ensure that proposals are submitted/received timely and compliant with the required mode of submission

· Track and follow up with stakeholders on the status of the proposal

· Prepare Bill of Materials and Costing for Tender/RFP/RFQ submission

· Participate in Tender/RFP/RFQ review meetings and site surveys when necessary;

· Source new sales opportunities through inbound lead follow-up and emails and respond to customer’s sales enquiries

· Provide inputs to improve and support the bid and sales processes

· Perform any other duties assigned by superior

Requirements:

· Degree in Electrical, Electronic & Computer Engineering

· Min. 2 years of relevant experience in Information and Communications Technology (ICT) equivalent industry would be

· Familiar with tender/bid life cycle

· Good stakeholder management skills, communication skills and interpersonal skills

· Advanced proficiency in Microsoft Office tools (e.g. Excel, PowerPoint, Word)

· Solution oriented with keen interest in proposing and driving change when required

Job Responsibilities:

• Responsible for evaluating structural concept and details of individual projects submitted by Qualifed Person and carrying out independent analysis and checking to ensure safety and compliance with BCA and relevant authorities requirements
• Day-to-day handling and managing of Accredited Checking projects, including detailed analysis & checking, production of design reports and project correspondence
• Regular monitoring of project progress and reporting to the Business Unit Manager
• Managing project deliverables viz design reports, progress reports and presentations
• To liaise with Qualifed Person in all project related issues and representing the company in project, progress meeting and technical meeting
• To manage and monitor sub consultants/vendors (for project) on their deliverables, schedule, quality as well as assessment
• To assist finance department to certify payment from the sub-consultants/vendors timely and claim the receivables from the clients timely according to project payment schedule
• To assist the Business Unit Manager to enhance group competency by actively participating in implementation & timely updating of design tools/standards/procedures/rules & initiatives by government authorities

Job Requirements

• Bachelor of Civil Engineering
• At least 8 years of relevant working experience
• Good knowledge in detailed design of civil engineering works
• Familiar with codes of practices, relevant regulations and submission requirements
• Able to work independently to support the Qualifed Person

Summary of role: You will be involved in the designing of electrical system that meets the project requirements, safety, and functionality.

Responsibilities:

· Design and draft of Electrical Single Line / Panel Diagram according to customer technical specification;

· Maintain, update and correct drawings as needed, and ensure its accuracy and completeness;

· Collaborate with project teams to facilitate drawing preparation;

· Respond promptly to inquiries and request relating to the drawings.

Requirements:

· Diploma/Degree in Electrical/Electronic Engineering from a recognised Polytechnic/University;

· Knowledge in Autocad and Eplan is an advantaged;

· Possession of team spirit, good communication and organising skills;

· A good team player with strong collaboration and stakeholders’ management skills;

· Excellent organizing skills, spoken and written communication skills.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Attend to customer enquiry on Industrial Automation products
• Work with design team on conceptual design
• Prepare periodical sales report
• Project management support for the entire project cycle
• Work with marketing team to explore new business opportunities

Job Requirement

• Diploma/Degree in any Engineering discipline
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Exposed to Project Management, Industrial Automation and/or Robotic Systems
• Working knowledge of Auto CAD

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Requirements:

* Min Diploma in Mechanical engineering

* Able to use Autocad

* Able to speak English and Chinese

* Knowledge in ACMV

* Ability to work independently, as well as in a team

* Able to work under tight schedule

* Fresh graduate are welcome

Responsibilities:

* Plan and schedules work with reference to contractual schedules

* Attend to all operational matters related to the daily running of the project

* Liaise with clients/consultants/project managers concerning submission for product catalogue/technical data, shop drawing, method of statements and O&M

* Attend site meetings and inspections, report regularly on progress and monitor project schedule

* Testing and Commissioning of the completed installations with Clients/Consultants/Sub-Contractors

* Co-ordinate with clients/consultants/project managers to handover completed project with O&M Manual.

* Conduct training to Client for project handing over

Job Title: Project Engineer (ID8126)
Location: Lavender
Working Hour: 5 days work Monday-Friday 8:30am – 6pm, Saturday 8:30am – 1pm
Off day: Sun and PH off
OT: 1.5 times, Sun and PH 2 times
Salary: $3000 - $4500

Job Description:
• Responsible for reporting to the project
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes monthly progress claim for submission
• Attending on-site meetings whenever required
• Overseeing project progress and provide regular updates to management

Requirement:
• Preferably Bachelor’s Degree in Mechanical or Electrical Engineering or equivalent experience
• Polytechnic Diploma
• Min 1 year of experience as Project Engineer
• Able to read and write in proficient English

Our’s Company is a Process Automation Company for Water Treatment, Electrical Power Monitoring, Wafer Fab Clean Room, Building Automation, Data Center etc.

• Career development opportunities
• Entry level candidates are welcome & training provided

Responsibilities

• Project Management
• Engineering Design Work (Software / Hardware)
• Site Testing and Commissioning
• Project Documentation
• Oversea Travel as required

Requirements

• Degree in Engineering in relevent engineering field such as Electrical, Electronics, Computer Engineering or Computer Science.
• Working Experienced, 1-2 Years Preferred, Fresh Graduate will be considered, and training will be provided.
• PLC Engineering: Programming Skills in Omron, Schneider, Allen Bradley, GE Fanuc, Siemens or similar PLC preferred.
• SCADA Engineering: Familiar with Wonderware, Citect, Intellution, Proface or other Industrial Graphics Software.
• PROJECT Engineering: Able to design PLC Control Panel, Electrical Starters, VSD or Soft Starter Panels.
• Must be computer literate in Excel, MSWords, ACAD Drawings, Viso etc
• Excellent inter-personal and communication skill.
• Strong leadership skill.

A good career growth awaits the successful candidiate.

Interested candidates please send your resume.

We regret only shortlisted candidates will be notified.

Thank you for your application.

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes.

Our customers span industries and geographical regions; and our focus is to engage in the dynamics of our customers’ vertical markets; including financial services, TMT (telecommunications, media and technology), education, healthcare, retail, government, manufacturing and professional services, and apply the skills of our 6,500 employees in modernising key digital pillars; data centre and cloud services, security and network infrastructure, workspace communications and collaboration, data and information strategies, and IT operation modernisation.

We are the advocates for our customers for some of the world’s leading technology companies including Cisco, HPE, IBM, CA Technologies, NetApp, Microsoft, Oracle, VMware and ServiceNow.

The Logicalis Group has annualised revenues of $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4.3 billion.

Summary of Position

The Enterprise Networking engineer is a technical implementation role which will focus on delivering Enterprise Networking Technologies Data Centre, Routing & Switching, and Software Defined solutions to new and existing customers. The position will be a critical member of the Service Delivery team who designs and builds new Infrastructure. This role will work directly with customers to capture business requirements, share best practices, make recommendations, document the optimal design, provide trainings and build the approved solution.

This role may also support business development activities by providing demos or POV for the mentioned technologies below.

Key Responsibilities:

• Low Level Design and signoff
• Asbuilt Documentations and signoff
• SAT, UAT Acceptance Tests and signoff
• Configurations and Optimizations
• Staging and Burn in Tests
• Upgrades and Simulations
• Racking and Installations
• New Project engineers shall undergo onboarding process to familiarize practices and culture. User and Vendor trainings are regularly organised.

Qualifications:

• Diploma or Bachelor's Degree in Computer Science/Information Technology or equivalent
• Minimum 8 years of experience in network design/deployment.
• Current CCNA/CCNP qualified with related professional experience
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS,
• Cisco ASA, Firepower, Fortigate,
• Experience in wireless setup eg. Cisco WLC, Aruba
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass
• Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Title: Sales Engineer (ID5039)
Location: Tuas
Working Hours: Mon to Fri, 8.30am to 6pm
Salary: $3400 to $4800

Job Description:
• Generating new customers base & maintaining relationship with existing customers
• Proactively identifying new business opportunities, developing, negotiating and closing commercial deals with customers
• Perform costing and submit quotation to customers which may include negotiating on tender, contract terms and sourcing for raw materials
• Providing the technical solution required to address client requirements
• Prepare sales order and necessary manufacturing documents
• Work closely with project management team in managing the project progress
• Participate in marketing efforts by the sales team through coordinating or attending trade shows and conferences
• Liaising with other members of the sales team, engineers and other technical experts

Requirement:
• Interested in sales
• Prior experience in the welding / oil & gas industry preferred
• Good interpersonal, communication
• Ability to read technical drawings
• Good in mathematics
• Strong desire and ability to learn quickly and acquire new skills
• Comfortable working independently

Job Title: Design Engineer (ID5042)
Location: Tuas
Working Hours: Mon to Fri, 8.30am to 6pm
Salary: $4000 to $6300


Job Description:
• Design component and assembly with CAD software. Prepare engineering drawings and engineering bill of material
• Analyse, design, develop, maintain products and assist in their commercialization
• Review technical documentation including engineering specifications, drawings, calculation packs, bill of materials, guidelines and repair procedures
• Checking and approving drawings, information and documentation which meets engineering standard to enable the manufacturing group and other departments to produce and market product
• Attend and initiate Design and Development Planning and Review session to meet customer's and industry's need

Requirement:
• Have a Bachelor's Degree in Mechanical Engineering
• Have experience (5years) in mechanical engineering in Welding / Oil & Gas engineering or other related fields. At least 3 years of product design experience in Oil & Gas Industry
• Have knowledge in API Standards and Monogram
• AutoCAD and #D design are the basic knowledge. Most preferably already familiar with ProE/Creo, SolidWorks, CATIA. NX or similar CAD and FEA/CFD program
• Display good oral and written communication and presentation skills in English

Candidates are expected to:-

• Participate in the general planning of maintenance and operations onboard vessel;
• Control the detailed implementation of the general plans in appropriate areas;
• Plan the activities of immediate subordinates and officers under his/her charge;
• Serve as a member of the Management Team onboard vessel;
• Implement safety policies and practices onboard vessels according to the QHSSE policies as defined;
• Perform the role of the Training Officer for any Engineer Cadets/Ratings;
• Deputise for the Chief Engineer when necessary; and
• Appraise the performance of immediate subordinates and Cadets and report to Chief Engineer.

The ideal candidate must:-

• Possess a Certificate of Competency (Marine Engineer Officer Class II); and
• Possess at least 3 years of experience as a Second Engineer Officer onboard a container vessel.

Our’s Company is a Process Automation Company for Water Treatment, Electrical Power Monitoring, Wafer Fab Clean Room, Building Automation, Data Center etc.

• Career development opportunities
• Entry level candidates are welcome & training provided

Responsibilities

• Project Management
• Engineering Design Work (Software / Hardware)
• Site Testing and Commissioning
• Project Documentation
• Oversea Travel as required

Requirements

• Degree in Engineering in relevent engineering field such as Electrical, Electronics, Computer Engineering or Computer Science.
• Working Experienced, 1-2 Years Preferred, Fresh Graduate will be considered, and training will be provided.
• PLC Engineering: Programming Skills in Omron, Schneider, Allen Bradley, GE Fanuc, Siemens or similar PLC preferred.
• SCADA Engineering: Familiar with Wonderware, Citect, Intellution, Proface or other Industrial Graphics Software.
• PROJECT Engineering: Able to design PLC Control Panel, Electrical Starters, VSD or Soft Starter Panels.
• Must be computer literate in Excel, MSWords, ACAD Drawings, Viso etc
• Excellent inter-personal and communication skill.
• Strong leadership skill.

A good career growth awaits the successful candidiate.

Interested candidates please send your resume.

We regret only shortlisted candidates will be notified.

Thank you for your application.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Responsibilities

• Responsible for developing applications for projects including graphics, reports and calculations
• Responsible in conducting internal testing and acceptance tests and user training
• Responsible for preparing documentation including design specifications and manuals
• Responsible for providing high quality technical support to our customer
• Responsible for conducting onsite routine health check of the systems installed at customer base and documenting troubleshooting and problem resolution steps

Requirements

• Min Diploma in Computer Science or relevant
• Min 2 years of working experience in Project Management in SI Industry
• Proficiency in programming like Visual Studio, ASP and Java, MS Office with VBA and industrial automation is an advantage
• Knowledge in Microsoft SharePoint 2007/2010 (MOSS/WSS) is an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026