Responsibilities:

• Overall, in charge of the management and control of ALL Site Supervisors, including those of OTHER disciplines project consultants, in the supervision of the construction and related works and ensure that the works are done to the best quality possible within the schedules and approved contractors’ work programme;
• Provide leadership and administrative control of the other Site Supervisors, institute and maintain discipline, punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other personnel administrative matters and welfare on the site; and
• The SRE shall note that he shall not issue instructions to the contractors involving cost or time implication to the project.

Requirements:

• Degree in Civil or Structural Engineering or equivalent or accreditation recognised by Professional Engineers Board, Singapore (PEB Singapore);
• Registered as Resident Engineer with BCA/IES/ACES; and
• More than 10 years of relevant site supervision experience as a resident engineer.

Responsibilities

• Support and assist the SRE in all of the above duties as directed by him and/or the supervising Qualified Person(s)
• shall be familiar with the respective M&E system testing and Commissioning (T&C) procedure and attend T&C and necessarily follow up with the Consultant and Contractor;
• Demonstrate strong understanding of respective M&E sequence of works and co-ordinating works;
• The Resident Engineer shall have experience in solving site clashes/problem with regards to M&E and other disciplines.
• The Resident Engineer (if no SRE) shall be responsible for maintaining discipline and punctuality among his team of RE and RTOs. He shall also ensure his team update their site movement chart and report absence to the office administrator.
• If no RE or RTO (C&S) and/or no RA are appointed for the project, the RE (M&E) shall undertake the duties and responsibilities for the M&E and Architecture disciplines and supervise the works under the direction of the respective supervising Qualified Person(s).

Requirements

• Degree in Mechanical or Electrical Engineering or equivalent or accreditation recognised by PEB Singapore; and
• Possess at least 8 years of relevant and practical experience on site;

A) Job Summary:

Assist the M&E Manager in coordinating M&E specific works on site.

(B) Essential Job Functions:

The Senior/ M&E Engineer is responsible, but not limited to, the following:

Quality

• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions, and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Appraisal for works/products compliance to Specifications/Requirements and selection recommendation.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO, and responsible for clearing QA/QC inspections to meet with construction schedule.
• Provide and maintain all site inspection records & T&C records up to date.

Procurement, Contract, VOs, EOTs

• Responsible for variation order cost collection, cost verification of the VO works, and making necessary recommendations for VO prices.
• To check, evaluate, and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors' progress payments including instruction on progress substantiation document preparation by sub-contractors and vendors.

Safety

• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance at daily site coordination meetings and providing detailed coordination with subcontractors.

(C) Minimum Qualifications:

• A Bachelor’s Degree in Mechanical or Electrical Engineering.

(D) Personality:

• Good organizational and interpersonal skills.

(E) Knowledge/Skills/Abilities:

• Good technical knowledge in mechanical & electrical trades.
• Good knowledge of Local Code/Regulation Knowledge pertaining to M&E services, building construction, and safety.
• Time management skills with exceptional attention to detail and ability to manage particular tasks put in his charge.
• Good verbal and written communication skills.
• Ability to analyze and synthesize complex issues quickly

Our client is a leading logistics company. They are looking for a Software Engineer to assist their IT team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Software Engineer is responsible for:

Duties

• Assist in all phases of the Software Development Life Cycle (SDLC), including system analysis, design, development, quality assurance, user acceptance testing (UAT), maintenance, and ongoing support.
• Contribute to Agile development processes and demonstrate familiarity with DevOps practices.
• Provide training to users to enhance their understanding and effective utilization of the system.
• Analyze business processes to improve system efficiency and align functionalities with organizational goals.
• Collect and document system requirements from stakeholders, ensuring accuracy and maintaining data integrity for system enhancements.
• Collaborate with cross-functional teams to troubleshoot ERP system issues and improve data exchange with external systems.
• Customize and configure the ERP system to meet business needs, including implementing security access controls.
• Develop reports, dashboards, and custom solutions using relevant tools and frameworks to support system performance analysis and insights.
• Stay updated on system updates, industry best practices, and identify opportunities for continuous improvement.
• Any adhoc tasks and responsibilities as assigned by the Manager.

Requirements

• Bachelor's degree in Information Technology/ Computer Science or related field
• Min 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C# will be preferred
• Experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure will be advantage

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Job Scope:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer, and contractors
• Prepare technical engineering reports as and when required by authorities or client

Requirements:

• Minimum 2 years of experience as Design Engineer in building construction
• Willing to and with enthusiasm to learn in the eld of civil & structural engineering design
• Knowledge with Revit Structure is an added advantage

● Diploma, Bachelor’s degree or relevant qualifications in STEM, such as engineering or computer science.
● Must have experience as a full stack engineer building large-scale software applications.
● Advanced knowledge of front-end languages and frameworks including JavaScript, NextJS, React, Mantine, React-Query and Playwright.
● Good communication skills.
● Developing software in the cloud particularly with AWS.
● Experience developing RESTful and websockets APIs with NodeJS and ExpressJS, Python and FastAPI.
● Competent in both SQL and NoSQL databases such as PostgreSQL and MongoDB.
● Familiar with deploying and maintaining AWS infrastructure using Terraform and Terragrunt
Preferred Requirements
● Interest in learning, adopting and championing new technologies.
● Employs and advocates for good programming practices such as clean code, pair programming TDD and BDD.
● Experience working with micro-services.
● AWS Certifications.
● Working in an Agile environment.
● Familiar with cloud-native communication protocols such as gRPC.
● Familiar with event-driven architecture and publish-subscribe protocols such as AMQP.
● Able to lead new projects from conceptualisation to delivery.
● Breakdown high-level product requirements into functional tasks for implementation.
● Familiar with DevOps operations and troubleshooting microservices

• Report to the Planning Manager.
• Responsible for planning the overall schedule.
• Review and monitor the progress of the project while taking into consideration the schedule, cost control and risk management.
• Coordinates with construction team to report the reason of delay, potential risks and mitigation measures in consideration of understanding overall work sequence with planned resources
• Prepare project progress reports.

Job requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 15 years of relevant experience with A1 MNC construction firm is essential for this position
• Candidate should possess relevant experience in construction planning and program coordination for major infrastructure projects
• Experience in projects with international EPC contractors or mega projects with contract amount higher than S$500 million is highly preferred.
• Proficient in Primavera P6, MS Project and ERP is mandatory for this position
• Strong background in both technical and contractual issues
• Self-motivated, independent individual and possesses great initiatives
• Good interpersonal skills
• Past experience with LTA project(NSC) is an added advantage
• Location : Woodlands
• Project: Viaducts

• Experience using jigs and fixtures to align and bond optics with high precision
• Experience with methods of handling and cleaning optic elements
• Able to complete assembly of optics assembly or optical-mechanical assemblies
• Adjusts, calibrates, aligns, and modifies optical-mechanical assemblies and components and records effects on unit performance
• Troubleshooting, repairing and testing of optical-mechanical systems

Requirements

• Diploma in Mechatronics, Mechanical, Electronics or equivalent
• Good team player and yet able to work independently

Bayes is representing a European Systems Engineering MNC in the discipline of Industrial Processing

• Designing PLC Programming and Electrical drawings for Engineering applications in the field of Industrial Processing
• Performing basic calculations
• Generating material take-offs
• Ensuring timely execution of deliverables
• Assisting in project coordination, equipment installation arrangements, testing, and commissioning
• Assisting the manager in providing solutions to client requests related to electrical issues

Requirements

• Recognised Degree in Electrical/Automation, Electronics or related Engineering discipline
• Candidate must have 1 year of prior working experience in PLC Engineering, Automation, or Industrial Processing business
• Must be comfortable to travel regionally if required (low proportion)

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner

Head, Infrastructures Practice

EA Registration R1103367

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

Role: Reports to Head of Sales

• Build and manage a customer base for service sales in the Industrial, Marine, Offshore, and Oil & Gas sectors.
• Maintain excellent customer service standards and foster strong relationships with clients.
• Maximize profit margins and achieve predetermined sales targets.
• Identify and implement sales and marketing strategies to capture opportunities in local and international markets.
• Deliver sales presentations and provide necessary customer support.
• Collect and analyze information on market demands, competitors, and emerging technologies.
• Prepare and submit weekly, monthly, and quarterly reports.
• Ensure compliance with Environmental, Health, and Safety (EHS) requirements for all stakeholders.
• Perform other duties as assigned by management.

Requirements:

• Diploma (minimum), ideally in Business or Engineering.
• Experience with 2-stroke or 4-stroke marine engine services is an advantage.
• Proficient in Microsoft Office applications.
• Possesses a mindset focused on continuous improvement.
• Willing to travel both domestically and internationally.
• Familiarity with the Marine, Offshore, or Oil & Gas industry is preferred.
• Sales experience in the Marine, Offshore, or Oil & Gas industries is preferred.

Working Hours: Mon to Fri 8.30am-5.15pm
Work Location: Tuas Crescent (Company transport available from Marsiling and Jurong East)

Responsibilities:

• Source and identify suppliers for direct/ indirect materials/ services to expand supplier base and for new project/production needs.
• Obtain quotes from new sources to provide costing information and cost reduction
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/ services.
• Be part of team to conduct supplier qualification audit as well as parts qualification to ensure suppliers can meet company needs.
• Qualify suppliers once suppliers are selected in order to add suppliers into the Approved Vendor List.
• Conduct supplier performance review on a regular basis to manage supplier qualification and updates on supplier capabilities.
• Maintain standard operating procedures applicable to the Procurement department to ensure work flow process are consistence.
• Develop and negotiate favorable supply agreement with suppliers.

Requirements:

• We welcome Degree Holders in Mechanical Engineering without any working experience to apply
• Training provided

To Apply:

Please attach your resume in WORD with the following information :

• Reason for leaving last/ current employment
• Last drawn salary
• Expected salary
• Notice period

(We regret that only shortlisted candidates will be notified)

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Duties and Responsibilities:

a) Monitor compliance to airworthiness regulatory requirements and quality standards

b) Conduct of internal quality audits and vendor audits

c) Facilitate training on regulations and quality related subjects

d) Support Safety Management System program

e) Perform capability evaluation reviews

f) Administrate personnel authorisation approval

g) Conduct quality investigation, analysis and drive corrective actions

h) Maintain Quality related KPIs

i) Comply with Health, Safety and Environment (HSE) regulations as prescribed by local law and company’s policies.

j) Participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

k) Support to in Continuous Improvement Program

l) Any other duties as assigned

Experience and Qualifications:

a) Diploma / Degree holder in mechanical / electrical / electronic engineering or equivalent

b) Relevant CAAS papers qualification or equivalent will be advantageous

c) Minimum 2 years relevant working experience in aviation field is preferred

d) Knowledge on airworthiness regulatory requirements and AS9110 Standards

e) Trained Internal Quality Auditor / Lead Auditor is preferred

f) Safety Management System trained will be an added advantage

g) Good communication and writing skills

h) Knowledge in MS Office (Excel, Word, Powerpoint, Power BI), SAP, etc

i) Willing to work excess hours when required

j) Able to do business travel in short notice

k) Possess knowledge of statistical tools and methodology

l) Good team player and ability to handle tight datelines

The Job:

Act as key person of the project as designated by Piping Department Manager and performs the function inherent to this position.

Preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection.

Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information.

Review piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, providing technical guidance, and organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

The Role:

• Study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.

• Assist in planning and organizing piping engineering activities and manpower requirement for the project.

• Assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.

• Coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project.

• Prepare piping information list and layout and document list following standard procedure created for the project.

• Prepare piping general specification inclusive of specification for piping arrangement, piping support standards.

• Interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.

• Develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, air fin coolers, heaters, compressors and reactors, preferably in 3D CAD format.

• Check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Check and review piping material specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.

• Provide field engineering support/advice towards piping installation and testing at construction site.

• Perform the function inherent to Piping Key Person as designated by Piping Department Manager.

• Evaluate the performance of and provide counseling and guidance to members of the project.

• Identify and recommend training programs including cross training of piping staff within the team in collaboration with the Department Manager.

• Prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.

• Perform other tasks that may be assigned by the Department Manager.

• Carry out engineering support work during the construction phase of the project.

The Requirements:

• Degree of any four years BS Engineering course, preferably Mechanical Engineering or least 15 years related experience and/or training; or equivalent combination of education and experience.

• At least 12 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, and 5 years of which in a supervisory capacity.

• Good knowledge of AutoCAD.

• Basic knowledge of 3D Model review through Navisworks or SPR Software.

• Interpretation of stress/vibration analysis report.

• Able to read, analyze, and interpret common technical information, contracts reports and instructions.

• Able to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.

• Strong leadership qualities and analytical and reasoning abilities.

• Good interpersonal and communication.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Job Description

• Industry/ Organization Type: Manufacture of Electrical Equipment
• Position Title: Project Engineer
• Working Location: Nearest MRT – Woodlands North/Admiralty
• Working Hours: Monday – Friday, 8.30am – 6pm
• Salary Package: Up to $3,000 + VB
• Duration: Permanent

Key Responsibilities

• Attend meetings with clients and conduct site surveys to ensure all specifications and site conditions are accurately understood.
• Compile and update project progress reports, status updates, delivery schedules, and activities weekly, communicating these updates effectively to the Project Director and Project Controller.
• Respond promptly to both internal and external emails to maintain clear and effective communication.
• Maintain rigorous documentation of all project stages and ensure all designs submitted comply with client specifications and requirements.
• Continuously nurture and develop relationships with clients to ensure long-term cooperation and satisfaction.

APPLY NOW!!!

• Diploma in Electrical Engineering or an equivalent qualification with at least 1 year of experience
• Proficiency in AutoCAD and Microsoft Project is desirable
• Inexperienced candidates are welcome to apply as training will be provided

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70250 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Job Description

• Industry/ Organization Type: Civil Engineering Firm
• Position Title: C&S Engineer
• Working Location: Lavender (near MRT)
• Working Hours: 5 Days, Mon – Fri (8.30am – 6pm)
• Salary Package: Basic Salary + Annual Bonus
• Duration: Permanent

Key Responsibilities

• Perform civil and structural analysis, design development, and impact assessments.
• Oversee the planning, design, and coordination of civil engineering and infrastructure-related designs, as well as site works.
• Ensure that all engineering activities adhere to the relevant statutory requirements, regulations, and industry standards.
• Act as the main point of contact, maintaining communication between project stakeholders, clients, consultants, contractors, and relevant authorities.
• Support the Team Leader in ensuring that design and supervisory work meet high-quality standards.
• Other tasks as assigned.

APPLY NOW!!!

• Bachelor’s Degree in Civil Engineering or equivalent. (Preferably recognized by PEB)
• At least 1 year of design experience in civil engineering projects in consulting firm.
• Good knowledge of authorities’ submission requirements for civil and infrastructure projects is required.
• Familiarity with ground improvement works, civil and structural design, and BIM is a plus.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70252 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8AM – 5PM, Sat half day)
• Salary Package: Basic Salary up to $6,800 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Working with professionals for the building and maintenance of Formula One Race Track
• Monitoring of road levels, work out estimates for proposed work and putting up traffic control plan
• Carry out site measurements and prepare job measurements for ordering of required premix
• Planning and supervising of assigned project which includes night work as scheduled by LTA
• Manage race track construction team and adhere to health and safety guidelines
• Undertake risk assessments, deal with client, transport specialists and members of public
• Submit weekly progress report and attend monthly progress meeting
• Ensure machineries and equipment are always kept in good working condition
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG) or Defence Science and Technology Agency (DSTA)
• Prior experience with road construction and resurfacing is required
• Proficient in MS Office
• Class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70470 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Application Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $3200
• Duration: Permanent

Key Responsibilities

• Assist with vision software, GUI, and SDK integration.
• Develop and implement robotic applications and AI functionalities.
• Conduct evaluations and proof of concept, and create proposals for project initiatives.
• Install and provide on-site system support.
• Contribute to R&D efforts for emerging technologies.

APPLY NOW!!!

• Must Diploma/bachelor’s degree in an Engineering or Physics related discipline.
• Candidates with relevant experience but without the education will still be considered.
• Minimum of one (1) year of relevant work experience.
• Able to travel overseas for work
• Training will be provided for candidates without relevant experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70610 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

• Pre-plan and prepare detailed construction schedules, ensuring effective coordination of all project activities.
• Monitor and report on both on-site and off-site project management, ensuring adherence to schedules and milestones.
• Prepare and submit progress reports as required by consultants and clients, ensuring all stakeholders are updated on project status.
• Analyze and review project specifications, including civil/structural, architectural, and M&E drawings to ensure alignment with project requirements.
• Conduct regular monitoring of construction work activities, preparing daily, weekly, and monthly site reports.
• Collaborate with various teams and stakeholders to ensure smooth project execution and timely completion.
• Ensure compliance with all relevant construction methods, materials, and BCA (Building and Construction Authority) regulations.
• Perform site inspections and quality control to guarantee construction meets project specifications and standards.
• Manage site logistics, resource allocation, and troubleshooting of issues that may arise during construction.
• Daily sea travel to island work sites is mandatory.

Requirements:

• Relevant project experience in dredging, reclamation, or near-shore construction is preferred.
• In-depth understanding of marine construction processes, industry standards, and regulatory requirements, including contract law and legal principles.
• Strong knowledge of construction methods, materials, and BCA regulations.
• Excellent project management skills, with the ability to coordinate multiple tasks and stakeholders effectively.
• Strong communication and interpersonal skills.
• Ability to work under pressure and handle challenges efficiently.
• Ability to travel daily to island work sites.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Perform on-site service, maintenance, and repair of equipment.
• Ensure timely resolution of technical issues while maintaining high customer satisfaction.
• Participate in standby duties and provide support outside regular working hours as needed.
• Diagnose, troubleshoot, and implement solutions through self-learning and research.
• Accurately document service activities and maintain proper records.
• Collaborate effectively with peers and communicate professionally with customers.
• Ensure punctuality and commitment to completing assigned tasks.

Requirements:

• Comfortable working in a fast-paced environment.
• Willingness to take on standby duties as part of the job.
• Basic knowledge of Microsoft Office and computer skills.
• Demonstrated ability to self-learn and research technical information.
• Strong communication skills to interact with peers and customers.
• Highly punctual, reliable, and committed to delivering tasks on time.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)