1. Install, service and repair vending machines.
2. Maintaining vending inventories
3. Ordering repair parts and keeping service records
4. Organizing the warehouse space and keeping the cleanliness of warehouse.
5. Always maintain professionalism, tact, diplomacy, and sensitivity to portray the company in a positive manner.

• Perform maintenance, repair or overhaul of Air compressor efficiently and complete them in a timely manner.
• Guide and lead the team of technicians who lack experience or knowledge in troubleshooting, diagnostics and best practices in the said operation.
• Write and submit Service Reports timely in clear and logical manner.
• Communicate with Service Manager, Sales Department and Customers on job related issues, recommendations, unforeseen problems and to identify potential risks to the team and/or the equipment or job.
• Ensure safety observances on site both for self and team and highlight safety risks to Manager.
• Accountable for the upkeep of equipment and tools used as well as proper housekeeping of your work surroundings.

Job Qualifications:

• High competency in the operations, maintenance and repair of major Air Compressor brands (Oil lubricated screw and Oil Free) such as Atlas Copco, Ingersoll Rand, Kobelco etc.
• Familiar with the operations, maintenance and repair of Air treatment equipment like Air Dryer and Filter.
• Knowledge of Vacuum pumps, blowers or other rotating equipment such as pumps is a plus.

Requirements:

• To operate and maintain plant facilities and utilities.
• Responsible for continuously supplying purified water, chilled water, PUB water, steam, compressed air, etc.
• Responsible for continuous treatment of process wastewater and ensuring compliance with the discharge of treated water to the public sewage system.
• Responsible for continuously operating building services, including HVAC, ACMV, electricity, etc.
• Responsible for facilities & utilities equipment front-end troubleshooting.
• Responsible for carrying out or coordinating with vendors on asset repairs, maintenance, calibration, or project works.
• Execute assigned work activities on time.
• Responsible for safe operation and good housekeeping in facilities and utility areas.
• Manage external contractors/vendors in support of operation and maintenance activities.
• Assist supervisor in preparing equipment for maintenance, performing equipment isolation, LOTO, and supporting permit-to-work issuance.
• To provide input or be involved in drafting GMP documents eg. SOPs, forms, etc.
• Provide support to improvement projects, audits, EHS & Quality investigations, and CAPA.
• To be involved in internal and external inspections as required.
• Ensure compliance with GMP, regulatory requirements, ISO and EHS standards, and other relevant policies/standards, and support audit functions.
• Ensure workplace safety and be responsible for notifying management promptly of EHS/GMP deficiencies.
• Any other duties and responsibilities as assigned by the Supervisor.

Requirements:

• Possess a Minimum of NITEC in a technical field of study.
• Minimum 3 years of experience in the electronics, cosmetic, food, medical, or pharmaceutical industry handling facilities or utilities.
• Boiler Attendant Class 2 certification is a MUST.
• Competence in purified water, chilled water, steam, compressed air, wastewater treatment, cleanroom HVAC operations, and maintenance.
• Self-motivated, good teamwork, and interpersonal skills.
• Able to execute work as per work instructions or procedures.
• Experience working in an EHS environment and a permit-to-work system.

Key roles and responsibilities

• Water sampling pertaining to environmental testing based on scheduled and ad-hoc tasks assigned, in accordance to in-house SOP and established sampling techniques.
• Ensure proper documentation and records updating at the end of each working day
• Ensure safety and adhere to all Safe Work Procedures
• Must be contactable at all times when placed on standby duty

Skills & Experience

• ITE / Diploma in any discipline from any field.
• Entry Level are welcome as training will be provided.
• Able to write & communicate in English
• Must be physically fit, self-driven, team player with initiative, willingness to learn and good communication skills
• Able to work on rest day depending on job requirement
• Having Class 3 Driving Licence is essential

Benefits

• 5 days' work week
• Transport provided
• Attractive salary package
• Medical benefit
• Career development plan through continuous and structured training program (employment bond is applicable for specialised training courses)
• Standby allowance for urgent work activation
• Handphone Reimbursement

ABOUT THE NATIONAL INSTITUTE OF EDUCATION (NIE)

The National Institute of Education (NIE), Singapore, is Singapore’s national teacher education institute, and we are proud to be an integral part of the nation’s education service. We play a key role in the preparation of teachers and in the provision of teacher professional and school leadership development programmes. We are committed to our vision of being An Institute of Distinction: Leading the Future of Education, and our mission to Inspire Learning, Transform Teaching and Advance Research. Read more about NIE here.

The National Institute of Education (NIE) invites applications for a Senior Technical Specialist in Information Technology (IT) in the Learning Sciences & Assessment (LSA) Department. This role will provide you with the experience and opportunity to work in a dynamic department with faculty members, staff and students of NIE/NTU.

Job Description

We seek a highly organized and proactive Senior Technical Specialist in IT. The successful candidate will play a crucial role in leading and managing IT operations of the LSA department along with other Technical Specialist in the department and in collaboration with ACIS, NIE’s main IT department.

Key Responsibilities

• IT laboratories management: Lead and perform maintenance and upgrading (when necessary) of department’s IT assets (approximately 100 computers and 10 commercial applications).
• IT budgeting and purchases: Propose and monitor department’s IT-related budget.
• IT laboratories support: Provide classroom support to instructors in use of IT assets and educational technology applications.
• Emerging technologies support: Provide support for emerging technologies such as artificial intelligence for education.
• Curriculum support: Support course coordinators in e-learning contents management including AI/machine learning-related course materials.
• System administration: Manage and maintain department’s virtual servers in collaboration with ACIS, NIE’s main IT office.
• Web applications: Manage and maintain department’s web applications in collaboration with ACIS, NIE’s main IT department.
• Student research administration: Manage and archive department’s students research data.

Requirements

• A University degree in Information Technology or related field.
• Minimum of 2 years IT operations or development experience.
• Knowledge or experience in AI/machine learning and programming (Javascript, Python, etc.) strongly preferred.
• Ability to work independently and proactively.
• Ability to maintain confidentiality.
• This role requires overtime support for evening classes. We are seeking a candidate who is flexible and can adapt to varying schedules as needed.

Application

We regret that only shortlisted candidates will be notified.

Other Information

NIE staff can take chartered buses at their own expense from or near their homes to the NIE campus. This is subject to availability of seats.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

Assist ROV team

- Hydraulic/Mechanical/Electrical support (Setting up, troubleshooting, repairs etc)

- Support R&D activities to develop, fabricate and build/upgrade new/existing ROVs

- Support data recording activities on jobs

- System launch and recovery

- Housekeeping

- Ability to work outdoor, on-board ships, possess a level of physical fitness appropriate to the job requirements, and able to work based on operations schedules.

- To assist with ROV operations as instructed and in accordance with approved procedures and QHSE policies.

- Possess Class 3 driving license will be an advantage

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

JOB DESCRIPTIONS:
1) Receive raw material and ensure traceability maintained.

2) Study drawings/specifications and prepare inspection sheet,

3) Study drawing, specification to ensure that machine, fixture, tools and inserts used are suitable.

3) Perform precision machining as and when required.

4) Perform machine check and report its status.

5) Perform precision machining conforming to specified requirements.

6) Perform first piece inspection and record result.

7) Perform in process inspection and record result.

8) Report non- conformance, if any.

9) Upon completion of the job report daily production status.

10) Ensure all parts were properly protected from atmosphere corrosion.

11) Maintain measuring equipment and tool properly.

12) Maintain good house-keeping at all time.

13) Maintain safe and healthy work environment.

14) Ensure daily production record form are correctly submit daily.

15) Direct and coordinate the activities engaged in production or processing of components.

16) Assist plan shop activities as per production schedule and updating the production schedule.

17) Initiate, recommend and provide guidance to improve machining process.

18) Initiage investigation root cause of product non-conformance.

19) Any other duties that is assigned by superior as and when is required.

REQUIREMENTS

1) Interpretation of drawing, Setup Sheets.

2) Experience in operating of CNC Machine/ Turnmill / CNC Milling/ CNC lathe/ Borer.

3) Measurement skill.

4) Handling of company ERP system.

5) Able to direct and coordinate production activities.

6) Able to perform investigation root cause of product non-conformance.

7) Able to train new machinist on machining requirements, tooling and lifting equipment usage.

8) Min 3 years in CNC machining.

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

• Up to $2300
• 5.5 days Work per Week
• Monday – Friday (8.30am – 6pm), Saturday (8.30am – 1pm)
• Multiple work Locations available

Responsibilities:

• Perform maintenance, repairs, and servicing tasks across Electrical, Air Conditioning, Mechanical, Building, and General Repairs.
• Execute preventive, corrective, and breakdown maintenance for M&E works, air conditioning, or building infrastructure.
• Conduct facility or building maintenance, including troubleshooting and repairing mechanical, electrical, and plumbing systems.
• Promptly address defects and customer complaints, responding efficiently to fault reports, client requests, and breakdowns.
• Carry out regular maintenance and repairs on building facilities and systems to ensure smooth operations, reporting any issues to the supervisor.
• Perform preventive inspections and troubleshoot M&E systems.
• Record and inform the supervisor of any faults or issues found during routine checks.
• Complete any additional ad hoc duties as assigned.

Additional Information:

• 1-2 years experience and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Electronics /Building / Facility Management or facilities maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Description

· Operate high-end automated printing machine for quality output and timely delivery

· Run the printing press according to production plan

· Examines printed results for ink density, accuracy of design and registration conforming to required artwork

· Perform first level analysis and optimize the set-up between the printed sheets

· Conduct periodic autonomous preventive maintenance as scheduled

· Manage daily housekeeping

Job Specification

· Candidates with more experience will be consider for leader role

· Min 2 years of relevant experience in the printing industry

· Able to work rotating shift in west area

Responsibilities

· Manage and maintain the company’s IT infrastructure, including servers, networks, and hardware

· Oversee the migration to and management of the Azure environment

· Administer and support the MS365 environment

· Implement and monitor cybersecurity measures to protect company data and systems.

· Provide technical support and training to employees.

· Develop and enforce IT policies and procedures.

· Conduct regular system audits and vulnerability assessments.

· Stay updated with the latest IT and cybersecurity trends and technologies

Minimum Qualifications

· Minimum 3 years proven experience in managing IT Infrastructure and/or cybersecurity

· Strong knowledge of Azure and Microsoft 365 environments

· Familiarity with network and server management

· Excellent problem-solving and communication skills

· Strong communication and collaboration skills

· Relevant certifications (e.g., CompTIA Security+, Microsoft Certified: Azure Administrator) are a plus.

Responsibilities

• Configure and manage infrastructure systems, applications, and network equipment (e.g., Active Directory, data centers, firewalls, VPN, video conferencing).
• Oversee desktops, mobile, and remote devices.
• Ensure automated backups, disaster recovery processes, and system patches, with close monitoring of resource usage.
• Work with external vendors to uphold SLAs.
• Develop and update technical documentation (admin and user guides).
• Support local and international users over LAN/WAN securely.
• Identify suitable products, solutions, and suppliers for project needs.
• Provide L1/L2 support and participate in projects as a lead or team member.

Requirements:

• Diploma/Degree in Computer Science, IT, or CCNA Certification.
• At least 1 year of relevant experience.
• Proficient in enterprise networking (WAN, LAN, VPN optimization).
• Skilled in Microsoft Server (2012+), Microsoft 365, Google Suite.
• Knowledgeable in internet architecture (TCP/IP, DNS, DHCP, Proxy, Firewall).
• Familiar with Alcatel PABX, FortiGate, Cisco, and Unifi Wireless AP Controller.
• Strong understanding of CyberRisk and CyberSecurity; PDPA familiarity preferred.
• Experience with Veeam, VMware, and UNIX/Linux is beneficial.
• Background in API/Web Programming and Database Administration is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Scope:

The successful candidates will be involved in the operations of the assigned process plant units involving work in the field and at the control panel:

• Perform field patrolling to monitor site conditions and take corrective actions to ensure safe and smooth plant operations
• Perform frontline trouble-shooting to address deviations, improve plant reliability & process safety
• Prepare equipment for maintenance and re-commissioning activities
• Ensure safe and smooth operation of plant facilities, such as exchangers, rotating equipments etc

Requirements:

• Diploma in Chemical Engineering / Chemical Process Technology, OR
• Nitec / Higher Nitec in Chemical Process Technology, OR
• GCE ’O’ Level with credits in Physics or Chemistry, and Mathematics
• Must be prepared to work on 3 rotating shifts

• Inspects specific assemblies, onboard boiler repair, deck panels, and coverings, for conformance to dimensional specifications and quality standards, using level, square, and measuring instruments and applying knowledge of carpentry.
• Responsible to issue PTW for all site work
• Responsible and accountable to follow all Safety Procedures of the site.
• Performs In process sampling and testing.
• Performs simple maintenance jobs in accordance with safety requirement.
• Preparation of equipment for lock out tag out (LOTO), filter change outs etc.
• Report all accident, injury, near miss, unsafe conditions, and behaviour to immediate supervisor so that remedial actions can be taken to eliminate risk.
• Ensure utilities and facilities problems are identified and repaired quickly.

Technical coordinators provide basic administrative and light tech support services to assist with a project or the operation of a department. They often handle routine paperwork, data entry, preparing and processing of documents, and responding to general requests for information. They also assist with the creation of spec sheets, promotional collateral, and other materials. They may assist with billing, inventory, and logistical tasks, as well, and often relay information and materials between departments or individuals.

Job Title: Emergency Medical Technician (EMT)

Job Type: Full-Time

Description:We are seeking a skilled and compassionate Emergency Medical Technician (EMT) to join our dynamic emergency response team. The EMT will be responsible for responding to emergency calls, providing efficient and immediate care to the critically ill and injured, and transporting patients to medical facilities.

Responsibilities:

Respond to calls for non emergency medical assistance, such as cardiopulmonary resuscitation (CPR) or bandaging a wound.

Assess a patient’s condition and determine a course of treatment.

Provide first-aid treatment or life support care to sick or injured patients.

Transport patients safely in an ambulance.

Follow protocols and guidelines to maintain high standards of patient care.

Communicate effectively with patients, their families, and other healthcare professionals.

Maintain a clean, sanitary, and organized work environment.

Requirements: Certification as an EMT.

Proven experience in the field is preferred.

Strong decision-making skills and ability to perform effectively in stressful situations.

Excellent interpersonal and communication skills.

Physical stamina and ability to lift and maneuver patients.

Valid driver’s license if any.

Benefits: Competitive salary and other benefits

Opportunities for advancement and professional development.

Application Instructions: Please submit your resume and cover letter via email to [email protected]. State why you believe you are a suitable candidate for this role and how your skills and experience align with the needs of our team.

Key Accountabilities:

• Undertake the assignments on one's own such as commissioning, installation, maintenance, trouble-shooting and repair/overhaul for MTU engines and associated product
• Capable of resolving technical matters and completing services according to the works order for acceptance by the customers.
• Conduct acceptance test of equipment and systems with customers or customer representatives.
• Carry out repair/adjustment if required.
• Provide service/investigation reports where applicable.
• Prepare and submit travel report on work progress as well as completion of project.

Requirements:

• Minimum Diploma/Degree in Mechanical or Marine Engineering.
• At least 2 – 3 years of experience in the diesel engine/generator industry.
• Experience in troubleshooting, project handling/execution, servicing and commissioning.
• Communicates effectively, has a strong initiative and ability to work under pressure.
• Possess logical and analytical skills
• Highly independent, and an excellent team player.

Job Description:

- Setting up, maintaining and regular lubrication of machines.

- Run production to produce required output.

- Carry out effective in – process inspection

- Carry out adjustment of tooling and change of worn out tooling.

- Trouble shooting of production problem.

- Daily housekeeping.

- Training of operators & new staff

Job Requirements:

- Nitec in mechanical or electrical background preferred

- Able to comply to safety procedures.

-Must be able to lift heavy objects

- Able to commit to work shift work

• Up to $2500
• 5.5 day work per week
• Tuas

Responsibilities:

• Perform maintenance and repairs on crane and hoist systems to ensure optimal performance.
• Diagnose and repair mechanical and electrical issues efficiently.
• Assist with the installation of new crane and hoist systems per safety standards.
• Conduct load testing to verify system safety and document results.
• Ensure all work complies with safety regulations and company policies.

Additional Information:

• Candidate possess with electrical and crane/hoist servicing basic knowledge will be added advantage
• Required to WORK AT HEIGHT.
• Willing to learn, positive work attitude and good team player.
• Willing to work overtime when required. OT available.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

Job Responsibilities:

• To perform mechanical fitting job, machine assembly and maintenance, which requires knowledge of machine fits and tolerances
• To lead a team of technicians in preventive maintenance, checking and inspection, troubleshooting, repairs and overhauls of machinery and equipment having assigned and allocated resources to meet targets through planned and scheduled annual maintenance activities
• To carry out metal working for hot works
• To execute welding work
• To operate heavy machinery and perform lifting works
• To read mechanical drawing

Job Requirements:

• Candidate must possess at least secondary school education/ NITEC
• Past experiences in heavy industry/ metal fabrication shops/ machine maintenance will be preferred
• Candidate should possess basic knowledge of computer and data entry, and basic command of English (ability to read, write and speak)
• Able to work rotation shift and weekends

JOB DESCRIPTION

• Prepares metal surfaces for electroplating (cleaning, degreasing, sanding)
• Sets up and operates electroplating equipment (tanks, rectifiers, pumps)
• Applies various electroplating coatings (nickel, chrome, copper, zinc)
• Monitors plating process parameters (temperature, pH, current density)
• Conducts quality control checks (thickness, adhesion, appearance)
• Operates CNC machines to manufacture parts, monitoring for accuracy and quality.
• Troubleshoots machine errors, identifies issues, and performs repairs.
• Conducts routine maintenance, cleaning, and lubrication of machines.
• Ensures compliance with safety protocols and quality standards.
• Collaborates with engineers to optimize manufacturing processes.
• Inspects finished parts for quality and precision.
• Maintains accurate records of production, maintenance, and quality control.

REQUIREMENTS

• Must have 3 years or more relevant experience
• Must have Relevant Diploma or Degree
• Follow the companies policies and procedures
• Must have strong written and verbal communication skills
• Must work in irregular shift patterns (Including Night Shifts)