Sample Preparation

· Receive and label all samples brought into the lab for accountability.

· Prepare samples from drying, crushing, splitting and pulverising.

· Mix fluxing reagents and load samples in furnace for the fire assay.

· Mix reagents for acid digestions.

· Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.

· Perform smelting and sample extraction of precious metals as and when required

Setting up of Fire Assay Laboratory

· Assist with the set-up of laboratory, prepare the SOPs for Fire Assay techniques.

Measurement & Calibration

· Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

· Testing of precious metals scraps through cupellation method (fire assaying).

· Evaluate, validate, ensure and report technical accuracy of reporting analytical results

· Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.

· Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

· Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.

· Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager

· Procurement and placement of all consumables, equipment and fixtures.

· Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.

· Maintain and record equipment faults.

· Troubleshooting of analysis methods.

Laboratory Housekeeping

· Ensure and maintain work areas and equipment are clean, tidy and organised.

Manpower Planning

· Assist with overtime planning in consultation with the Lab Manager.

· Assist with control and time keeping administration.

· Maintain productivity and turnaround time.

Compliance with Safety Protocols and Local Regulatory

· Assist with the application and maintenance of all necessary governmental licenses related to the laboratory. (Eg: DoE, DOSH, BOMBA, Poison Act etc.)

· Promote and implement workplace safety initiatives

· Ensure and maintain proper sample disposal of cupels, fire assay lead

wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.

· React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

· Minimum Diploma qualification in Chemistry or its related field.

Relevant Experience

· At least 3 years’ experience as a Fire Assayer.

· Demonstrated understanding of the analytical processes in Fire Assay and the analysis process.

· Problem solving skills.

· Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.

· Possess experience and the ability to operate ICP / XRF is an advantage.

· Must be willing to work overtime whenever necessary.

· Knowledge in safe handling of industrial chemicals.

· Possess effective verbal and written communication skills.

About the Role

As part of our service team, you play an important role in ensuring that our customer's systems are in tip top shape. You'd be in charge of installation, upgrades, troubleshooting, maintenance & training.

There will be opportunities to enhance your competencies through our training programs as well as increase your exposure to different work settings and cultures.

Job Description

• Perform preventive & corrective maintenance, installations, training, upgrades & troubleshooting of various systems
• Provide technical support to our team of engineers & other departments when required
• Ensure compliance with health, safety, and environmental regulations at customer site
• Perform site reviews, surveys and inventory checks to ensure equipment and systems are in working order
• Carry out any ad-hoc project, assignment, maintenance or repair work assigned
• Ensure complete documentation of procedures and maintenance works

Requirements

• Minimum Nitec / Higher Nitec or Diploma in Engineering
• Good observation and analytical skills
• Ability to interpret technical drawings and diagrams
• Familiarity in troubleshooting techniques
• Proficient in written and spoken English
• Class 2B/3 driving license and have own transport is a plus
• Able to work rotating shift if required
• Able to do standby duty and OT on short notice
• Knowledge of computer & networking would be a plus
• Working knowledge of banking & ATM related software and hardware systems would be an added advantage

Key Responsibilities:

· Maintaining and setting up equipment and process solutions

· Operate copper plating equipment and process in accordance to instructions

· Perform quality inspection and generate documentation, records and reports

· Troubleshooting and discuss technical problems

· Performing titration activities and maintaining detailed chemistry logs

· Hazardous waste management and handling

· Be strictly compliant to all safety working procedures and 5S

Qualifications :

· ITE in Chemical Engineering or equivalent

· Possess certification in Management of Hazardous Substances

·

Experience :

· Minimum 2 – 3 years related experience in plating industry

· Basic knowledge of electroplating theory and chemistry

Job Description & Requirements

• Troubleshoot electrical devices, circuit breaker, relays sensors, motors and etc.
• Repair malfunctioning equipment, appliances and apparatus Assemble evaluate, and maintain electrical wiring, apparatus, and equipment
• Inspect and conduct preventative maintenance checks to reduce abrupt breakdowns
• Respond to breakdowns, diagnosing faults and record Perform electrical and instrumentation troubleshooting and repair work downtime
• Communicate with relevant authorities, internal amd external customers on all related matter
• Work independently to operate and test assigned machinery for safety and efficiency
• Other ad-hoc duties as assigned

Requirements

• ITE or Diploma in Electrical & Electronics Engineering
• Minimum 10 years of hands-on working experience as electrical technician
• Essential prerequisites include good analytical & problem-solving skills, ability to communicate with co-workers in different functions & contractors, and strong spirit of collaboration & team-work.
• Able to work independently with minimum supervision
• Ability to communicate in a clear and understandable manner
• Responsible and honest

Skills

• Preventive Maintenance
• Troubleshooting
• Electrical Wiring
• Inventory
• PLC
• Sensors
• Cabling
• Instrumentation
• Assembly
• Manufacturing Electrical Engineering
• Electronics
• Commissioning
• Switches
• Vacuum Pumps
• Test Equipment
• Safety Training
• Able To Work Independently

NOTE:- The manufaturing plant is located in Pioneer Crescent

Location: West

Permanent Night shift (10:45pm to 7:30am from Mon to Fri)

Salary up $3500+$300+shift allowances

Have AWS & Bonus

Responsibilities:

• Ensure all production equipment and facilities are maintained well.
• Minimize production downtime by reducing breakdowns.
• Performs preventive maintenance procedures for equipment on a scheduled basis.
• Maintains records of scheduled maintenance procedures. . Train production team on AM (autonomous maintenance) and to support Kaizen.
• Conduct daily walk-through/inspection to ensure that all infrastructure and equipment are in good working condition and provide feedback on any abnormality of failure of equipment for rectification.
• Plan and execute preventive maintenance on infrastructure and equipment.
• Repair and replace broken or malfunctioning components of machinery and equipment.
• Maintain critical spare parts list to minimize production downtime and to plan for sufficient stock of critical spare parts based on possible impact and frequency of parts failure.
• Attend and assist to vendors/ contractors within factory during servicing and maintenance of production, facilities and safety equipment.
• Ensure fire protection equipment is properly maintained and up to date.
• Strictly enforce and follow all health, safety, environment and quality procedures at all times.

Requirements:

• Minimum Diploma in Mechatronics/Mechanical or Electrics/Electronics Engineering or equivalent
• 3 years of relevant working experience in a similar environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: West

Morning shift or afternoon shift (No night shift)

Salary: $2800+$150+$200

Have AWS & Bonus

Job Responsibilities

• Perform all production activities at various stages and to work as a team with other production personnel to achieve production targets in accordance with ISO Quality Management System and applicable safety standards.
• Production Processes
• Weighing, mixing, filter preparation, filling and packaging.
• Completion of all associated production records in accordance with good documentation pratices
• Transfer of raw and packaging materials as well as finished products
• General Duties • Perform house-keeping and first-level trouble-shooting of equipment as needed.
• Equipment and area cleaning on regular intervals.
• Comply with all safety and environmental regulations.
• Work on continuous improvement initiatives within Production.
• Handle non-routine duties as assigned by senior technicians or Production supervisor.

Job Requirements

• Min GCE O Level / Nitec in production, preferably in industrial engineering.
• Min 3 years of related working experience preferably in chemical process related industry / production factory
• Computer literate (MS Office) and knowledge of Chemistry preferred

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job Responsibilities:

• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products
• Ensure all laboratory instruments and equipment are maintained and calibrated
• Manage the inventory of quality reference materials such as QC reagents and lab consumables
• Prepare daily QC report, relevant work instructions and validation protocol or reports
• Ensure documents and quality records are maintained for easy retrieval
• Manage operations towards timely support to meet factory analytical request
• Develop training to build quality and safety awareness
• To maintain cleanliness of laboratory and glassware
• Handle administration work of factory when required

Job Requirements:

• Min Nitec / Diploma in Chemical Process Technology or its equivalent
• Entry level (preferably 2 years experience in handling wet chemistry and laboratory management)
• Preferably with knowledge / skills on ISO900, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes
• Working hours: 8.00am - 4.45pm
• Work location : 19 Jalan Tukang

Job Descriptions:

• Responsible for day-to-day support and administration of Data center servers, Storage, and peripherals
• Incident management, Change request fulfilment and resolution to issues.
• Install, configure, and troubleshoot new, existing platforms, including Operating systems, storage devices, server applications and data center networking devices.
• Administer Active Directory, Group Policy, DNS, DHCP, IIS and related Server Ops scope.
• Perform routine server, storage, and backup maintenance, including updates, patching and upgrades.
• Develop, build, maintain proper documentation for all server operation matters.
• Implement controls and compliance according to ISO27001 standard.
• Familiar with Mitre Attack framework and vulnerability assessment
• Collaborate and work with subsidiaries across Asia to fulfil operation workload and ad-hoc projects.
• Lead projects as requested by Management.
• Voluntarily assist when workload is high for site operation.
• Any ad hoc duties as assigned

Job Requirements:

• At least Diploma or Degree in Computer Science or related disciplines
• Requisite MCSA or MCSE certification
• Minimum 5 years or more experience as a System engineer
• Preferably with Strong knowledge on SAN, NAS, and backup
• ITIL4 Certified will be advantages
• Veeam, Dell networker experience preferred.
• Experienced with HP and Dell storage, Hyper V as well as familiar with most virtualization environments2
• Regional exposure an advantage
• Strong knowledge on networking technologies
• Good problem-solving and communication skills is preferred.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Role: To support EE/ME/Reg engineers on product DVT activities across projects in US MNC in Networking Products. May be required to perform one or more of the following duties:

Responsibilities

• Setting up prototypes, test equipments and perform validation tests per test plan
• Performing board level digital/power/system measurements per test plan, uploading of test data to test portal
• Running margin tests in thermal chamber
• Performing thermal profiling tests under instructions from mechanical engineer
• Verifying board/system functionality prior to shipment to local/oversea test facilities
• Upgrading product code, system recipe
• Board recovery, rework
• Drawing out from inventory, distribution of prototypes, accessories to user groups in the project team
• Running system fault/PSU-system related/communication links (I2C/SPI)/HiPot/Surge tests
• Member of the LabTech Group and obliged to support other members during resource load balancing

Applicants who possess relevant experience are welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities

Interested candidates kindly click the APPLY NOW button.

EnviroDynamics Solutions Pte Ltd
EA License No.: 12C6285

Our client is a well established Healthcare & Laboratory Equipment company. They are currently looking for a QC Laboratory Technician to join their expanding team.

Salary: Basic $3,000 + Meal Provided + Transport Allowance
Work Days: 5 Days (8am to 5pm)
Work Location: Boon Lay (near Boon Lay MRT Station)
Work Terms: Full-Time Permanent

Responsibilities:
• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products.
• Ensure all laboratory instruments and equipment are maintained and calibrated.
• Manage the inventory of quality reference materials such as QC reagents and lab consumables.
• Prepare daily QC report, relevant work instructions and validation protocol or reports.
• Ensure documents and quality records are maintained for easy retrieval.
• Manage operations towards timely support to meet factory analytical request.
• Develop training to build quality and safety awareness.
• To maintain cleanliness of laboratory and glassware.
• Handle administration work of factory when required.

Requirements:
• Min Nitec / Diploma in Chemical Process Technology or equivalent
• 1 to 2 years experience in handling wet chemistry and laboratory management
• Preferably (not a must) with knowledge on ISO9000, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• No colour blindness and willing to stand while doing lab work
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Overview:

The IT Executive (Hardware) within the company functions as an internal systems engineer, primarily responsible for overseeing the company's IT infrastructure related to hardware, encompassing servers, the company network, PCs, and other IT equipment. This role involves close collaboration with other IT members who primarily handle software and support to various departments requiring IT assistance. Additionally, a partial aspect of the role involves providing support for software-related matters.

Play a vital role in upholding a resilient IT environment, enhance the end-user experience.

Key Responsibilities:

• Install, configure or migrate IT infrastructure (hardware), such as server and networks and peripherals, including printers, scanners, and other devices.
• Apply and maintain proper configurations, updates and patches to operating systems, software applications, and drivers to ensure IT security and optimize performance Address hardware and software issues by troubleshooting and offering technical support to employees.
• Maintain an up-to-date inventory of all hardware and software, ensuring proper functioning of equipment.
• Collaborate with the IT team to devise and execute new hardware and software solutions.
• Source, monitor and manage vendors to ensure optimal service delivery in line with company policies and procedures
• Manage projects including the design and deployment of new IT systems and services within the organization.
• Propose and monitor the department budget, especially hardware related expenditure
• Conduct training sessions for employees to ensure proper utilization of hardware and software.
• Manage disposal of IT equipment such as laptops, desktops, servers, external storage media/device, etc.

Requirements:

• Diploma or Bachelor's degree in Information Technology, Computer Science, Computer Engineering, or an equivalent field.
• Minimum of 3 years of experience in IT hardware, server, and network support.
• Hands-on in setting up, configuring, and resolving issues with Microsoft Windows Servers.
• Demonstrate familiarity with networking principles and protocols.
• Knowledge of network security principles and experience with Firewall
• Knowledge of system applications such as MS SQL Server, backup software, Application Server, and Checkpoint firewall.
• Experienced in troubleshooting, system administration, and supporting firewalls and network devices.
• Demonstrated proactive problem-solving approach.
• Strong communication and interpersonal skills.

Job Responsibilities:

• Provide Level 2 support to all IT hardware and Network related matters
• Ad-hoc projects assignment and fulfillment
• Review and improve processes pertaining to Infrastructure related services
• Develop and build quality Service document and procedures
• Enhance and establish Knowledge Management with ITIL as framework
• Handle and coordinate IT system procurement
• Assist in Annual Maintenance of Data center
• System Deployment
• Assist in Data backup and restoration
• Coordinate with vendor on network/hardware/software related matters
• System/network troubleshooting and rectification
• Assist in Annual system Audit
• Asset management
• Any Ad-hoc duties as assigned

Job Requirement:

• Minimum Diploma in related fields
• At least 3 to 7 years of relevant work experiences
• Ability to communicate with people of various levels
• Knowledge in MS office, Printers, MFP, MS Operating systems, Active Directory
• Requires Networking knowledges
• Microsoft certification will be added advantage
• Hands on and a team player
• Strong Problem solving skills.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Main duties and responsibilities:

· Perform repair and maintenance on all the company's mechanical and electrical machinery, tools, and equipment, and ensure they are kept in good working condition.

· Maintain a proper spare parts register to ensure the availability of spare parts;

· To troubleshoot, repair and perform regular preventative maintenance on all plant motors and other related equipment.

· Update all daily, weekly, monthly, and yearly maintenance checklists accurately;

· Promotes plant safety and ensures compliance with all applicable safety standards and regulations.

· Any other jobs as assigned by the head of department.

Requirements:

· Candidate must possess at least Professional Certificate/NiTEC in Engineering (Electrical/Electronic) or equivalent;

· Minimum of 2 - 3 years of machinery repair experience;

· Physical fit and flexible to work on extra hour when required.

DUTIES AND RESPONSIBILITIES

Your duties and responsibilities will be as follows:

· Responsible for outdoor and indoor repair work of all cleaning products.

· Robot mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.

· work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs

· Where there is no outdoor repair, you are required to work within the Company workshop

Requirements:

· Candidate must possess at least a Professional Certificate/NiTEC

· Field of Study: Electrical & Electronic Engineering / Electrical Engineering

· Understand engineering drawing and schematic layout are essential

· Possess Class 3 driving license

· Possess good communication and problem-solving skills

· Able to work independently

Element has an opportunity for a Laboratory Technician for sample preparation & testing. He/ She also needs to assist Chemist in laboratory testing and on-site sampling (if required).

Location: Sungei Kadut Loop, Singapore.

Job Duties:

• Analysis of cement, soil, aggregates, concrete and polymer samples as per standard method
• Operation of analytical instruments like UV-visible spectrophotometers, FTIR, auto titrator
• Prepare the reagents, standard solution and ensure standardisation of the solution used in the laboratory
• Handling and storage all chemicals as per the Material Safety Data Sheet (MSDS)
• Issue reports and receive samples to and from the respective entities
• Ensure work compliance to ISO 17025 requirements
• Willing to assist in other activities from time to time that may be requested by the department manager to assist in the execution of Element Material Technology annual targets and budget

Job Requirements:

• Minimum Diploma / Degree in Chemistry with at least 1 year experience in materials testing
• Have the ability to work in teams under pressure and flexible to work different working hours if required or necessary
• Good English communication skills: reading, writing, speaking and the ability to interact with all levels of staff
• Team player with initiatives with good communication skills and dedicated in responsibilities
• Knowledge and experience of safe operation of testing equipment and operation is advantageous

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Basic Up To $5000 (Depends on experience & Interview) + AWS + VB
• 5 Day including Weekend
• Location: Jurong East, Farrer Park, Upper Thomson, Bukit Timah, Serangoon, Katong, AMK, Tiong Bahru
• *May select a location (Depending on availability)

Job Scope

• Act as an additional set of eyes, ears, and hands for the veterinarian, ensuring optimal pet care and maximizing the veterinarian's productivity.

• Take the lead in communication with veterinarians and the veterinary medical team to facilitate the smooth flow of pets.

• Provide consistently professional, efficient, and exceptional service.

• Gather relevant information and client history to maintain accurate and comprehensive medical charts.

• Prioritize the safety of pets, clients, and associates by employing secure restraining techniques, adhering to standard protocols, and maintaining cleanliness, sterility, and organization in treatment areas, examination rooms, and labs.

• Educate clients on preventive care, pet health needs, diagnoses or treatments, hospital services, and other pertinent information.

• Assist as needed in surgical procedures.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Kam Shwu Min | EA Personnel No.: R22111811

• Perform routine maintenance tasks on logistics equipment and machinery
• Identify and troubleshoot equipment issues, and carry out repairs as required
• Conduct preventive maintenance checks to ensure equipment operates efficiently
• Maintain accurate maintenance records and documentation
• Collaborate with other team members and departments to ensure smooth operations and timely maintenance
• Follow safety procedures and guidelines when working with machinery and equipment
• Assist in the procurement and inventory management of spare parts and supplies
• Adhere to company policies and regulations at all times

• Possess Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging /packaging/conveyor system
• General knowledge on ac drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Experience in Bagging line would be advantage

Singapore Citizen and Singapore residents will be given priority in the selection process. Only the shortlisted candidate will be contacted within 2 weeks' time. If you have not received any call or email from our recruitment team, assume that you are not shortlisted for the position

Chan Chee Meng

EA 07C3069

R1110620

Element has an opportunity for a Metallurgy Technician. In this role, your primary responsibility is to perform routine, metallurgical, mechanical, failure, corrosion testing facilitating metallurgy operations at site or at a laboratory.

This role is based in Tuas location.

Job Duties:

• Perform routine mechanical testing (tensile, bend, charpy impact, hardness) including CTOD and metallurgical testing (micro / macro examinations) Involvement in site / field testing
• Coordinating with the technicians in the team to carry out work as per the planning schedule and assist with hazard identification and risk assessment exercises within their areas of responsibility
• Conduct either or combination of testing, analysis, calibration, monitoring, sampling and collection and sample preparation as directed
• Carry out routine laboratory tests, analysis, machining or preparation in line with authorized technical competence
• Carry out daily sample collection and ensure work compliance to ISO 17025 requirements

Job Description:

• Possess a minimum of Diploma in Metallurgy or related discipline, with 2-4 years of relevant working experience
• Good knowledge on international standards and codes
• Possess driving licence
• Good communication skills
• Self-motivated team playing with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Key Responsibilities:

• Perform testing of petroleum products, refinery intermediate, process and effluent water
• Conduct sampling and testing of gases and LPG streams
• Perform QC/QA work including calibration and maintenance of equipment
• Perform stock-taking and reordering of chemicals and consumables

Requirements:

• Diploma in Science & Technology / Engineering or NITEC in Chemical Process Technology / Chemical & Life Science

1. Design and Drafting:

- Use computer-aided design (CAD) software to create detailed engineering drawings and plans.

- Assist in the design process for various projects, such as buildings, machinery, or electronic systems.

2. Testing and Quality Control:

- Conduct experiments and tests to evaluate the performance and reliability of products or systems.

- Implement quality control procedures to ensure that products meet industry standards and specifications.

3. Technical Support:

- Provide technical support to engineers or other team members in the development and implementation of projects.

- Troubleshoot and solve technical problems that may arise during the design or manufacturing process.

4. Maintenance and Repair:

- Perform routine maintenance and repair of equipment or systems to ensure proper functionality.

- Diagnose and address issues with machinery or electronic systems.

5. Project Management:

- Assist in project management tasks, such as budgeting, scheduling, and coordinating activities to ensure project goals are met.

- Collaborate with cross-functional teams to achieve project objectives.

6. Installation and Commissioning:

- Participate in the installation and commissioning of new equipment or systems.

- Ensure that installations meet safety and performance standards.

7. Documentation:

- Prepare technical documentation, including manuals, reports, and specifications.

- Maintain accurate records of engineering activities and project progress.

8. Research and Development:

- Contribute to research and development efforts by staying updated on industry trends and incorporating new technologies into

Element has an opportunity for a Test Technician to join our rapidly expanding team.As a member of the operations team, the Test Technician position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under direct supervision.

This role is based in Jalan Boon Lay, Singapore.

Job Duties:

• Perform counting on gold jewellery
• Quality Check on Hallmark conditions
• Perform Hallmark on Gold Articles

Job Requirements:

• Able to work under laboratory setting for fire assay and XRF
• Good eyesignt (with our without glasses) and strong attention to details
• Good communication skills
• Able to work independently with minimum supervision as well as a team player

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Job Info:

• Salary: Basic from $2800 - $3500
• Working Hour: Monday – Friday (9am – 6pm); Vary by Ship Docking Timing
• Location: Jurong / Tuas

Job Scope:

• Performing and supervising installation independently
• Installation and commissioning for Marine Equipment such as Tank level gauging, remote control valve system and lifting equipment and Elevator
• Ensure safe work procedures are implemented at the work site while executing the work and preparing of reports

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

We are hiring Senior IT Executive to manage server and networks across different locations and to take care of daily IT operations duties.

Job Description

• Administer Server, Microsoft Server and Linux platforms in Singapore, Taiwan, Japan and Mexico.
• Administer network of Cisco and FortiGate Network Devices located at various locations.
• Work with HQ team based in China to ensure server and network availability, service quality and redundancy.
• Monitor server network performance and high availability at various locations.
• Install and update server and network devices software patches regularly with the latest and stable release.
• Manage the access controls as per business needs and document.
• Perform continuous research work on latest technologies to improve on our network infrastructure.
• Maintain server and network documentation including audit trails, processes, maintenance, diagrams, etc.
• Ensure backup of all server and network devices.
• Ensure timely completion of support tickets.
• Manage hardware, software and licenses
• Set up of hardware such as laptops, phones, PCs, printers, etc.
• Installation and maintenance of internal software and communication tools.
• Troubleshooting / provide support to the employees in Singapore, Taiwan, Japan and Mexico.
• Establish IT procedures / processes.
• To implement on project digitalisation improvement as per business requirement.

We are looking for

• Education: Bachelor Degree in Computer Sciences/Information Technology
• Experience: 5 Years

Requirements:

• Bachelor degree holders in Computer Sciences/Information Technology.
• 5 Years of working experience in IT field.
• Experience in Window Server Operating Systems, Active Directory, Microsoft office 365.
• Hands on experience in FortiGate, Cisco equipment.
• Data Centre and Branch WAN experience.
• Familiar with wireless channel division, wireless network optimisation.
• Understand the IEEE 802.11a/b/g/n/ac/ax protocol family
• Understand MIMO, OFDMA and other technologies.
• Understand the network access control system.
• Must have CCNA certification and good to have CCNP certification.
• Must be able to work in a team environment and support overseas colleagues remotely.
• Good verbal and written communication skills.
• Good analytical, interpersonal and problem-solving skills.
• Ability to work independently and to collaborate as part of a team.