Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

The Process Technician is responsible for the daily operation of the equipment and procedures for the Plant area to which he/she has been assigned. This includes responsibility for manipulation of equipment and controls to carry out procedures, and completion of in-process analytical for process decisions and verification, and housekeeping of the work area. In completion of his/her job tasks, the Process Technician is responsible for seven basic performance areas – Yield, Capacity, Safety/Health/and Environmental, Quality, Plant Condition, Skill Development and Other Costs.

Education:

- NITEC/Diploma in chemical technology or closely related field

Job Description:

• Attend to all the maintenance & repair job required and ensure successful completion.
• Perform preventive maintenance in all production machines.
• Report and identify any defect or faults found during preventive maintenance.
• Perform routine maintenance, troubleshooting, and repairs on stamping presses, feeders, conveyors, and other related equipment.
• Inspect mechanical, hydraulic, pneumatic, and electrical systems to identify wear, damage, or potential failures.
• Develop and adhere to preventive maintenance schedules to minimize downtime and maintain equipment reliability.
• Conduct periodic inspections and adjustments to ensure machinery operates at peak performance.
• Use diagnostic tools, schematics, and blueprints to identify and resolve equipment malfunctions.
• Collaborate with engineering teams to implement effective solutions for recurring issues.
• Ensure proper operation of safety devices, sensors, and automation systems.
• Maintain detailed maintenance logs, repair records, and inventory of spare parts.
• Report significant issues, root cause analyses, and resolutions to supervisors or engineering teams.
• Ensure compliance with workplace safety regulations and company policies.
• Conduct regular inspections to verify equipment meets safety and quality standards.
• Suggest and implement process improvements to enhance equipment efficiency and reduce downtime.
• Participate in training programs to stay updated on new technologies and techniques in the industry.
• Any other duties as assigned by superior and/or management.

Requirements:

• Minimum NTC 3 in Mechanical/Electrical Fitting.
• Certification in maintenance and reliability (e.g., CMRP) is advantageous.
• 2–5 years of experience in maintenance within a stamping or manufacturing environment is highly desirable.

Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Job Scope

• Ensure compliance to the manufacturing process by following the official work instruction or other related documents. In process checking, adjustment and set-up
• Knowledge in Machine assembly, Structural assembly, Pneumatic and Hydraulic components assembly
• If client require for any troubleshooting in Mechanical assembly should be able to do it.
• Follow the work schedule assigned by the supervisor to meet the production KPI
• Must take care the quality of the products and tools provided for assembly and also moving, packing, and sorting parts or finished goods.
• Free thinker with commitment to do Over time

Requirements and Qualifications

• Experience in working with industrial machine assembly
• High school or diploma with internship certificate considerable
• Minimum 2years experience.
• With Singapore Driving license

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Element has an opportunity for an Technician to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

Job Duties:

• Perform Calibration and Measurement of Dimension gauges and instruments as per WI using CMM, reference master, tester etc (on-site and in-house) with report and necessary administrative work
• Conduct routine maintenance and calibration of lab equipment as schedule and assigned
• Ensure proper delivery of service to customer(s)
• Any other duties as assigned by Manager/ Section Head/ Senior staff

Job Requirements:

• MInimum ITE in Aerospace / Precision or Mechanical Engineering
• 1 year or more experience in Calibration and Measurement of Dimension with knowledge on dimension instrument calibration and CMM measurement is preferred
• Fresh graduate is welcome to apply
• Able to work under pressure with acceptable level of output and able to complete work according to deadlines set
• Good working attitude and to maintain good interaction with colleagues
• Customer Oriented

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Responsibilities:

• Knowledgeable in servicing and maintenance for refrigeration / electrical machines.
• Identifying faults, troubleshoot, and repair various commercial kitchen equipment.
• Performing repair jobs promptly and efficiently.
• Submitting of daily report for servicing & maintenance functions.
• Ensure all documents are updated upon completion of work
• Ensuring all works comply with the appliance standards and Health and Safety Act.
• Perform equipment quality compliance check.
• Work closely with direct superior to maximize repair rates.
• Maintaining service vehicle in good condition.
• Maintain the work bay and workshop areas in orderly and safe working conditions and exercise good housekeeping practice.
• Any other duties as assigned.

Job Requirements:

• Hands-on experience in installation, maintenance, troubleshooting and/or repairs in electrical machines and mechanical diagnostic skills.
• Possess a valid Singapore class 3 driving license is preferred.
• Other relevant skills or experience we will consider to be of benefit.
• Basic and/or excellent written (English)

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Established company located in Tuas looking for experienced production technician to join its production team. Candidate have sound knowledge in operating and maintaining CNC router machine, Fiber/ CO2 laser-cutting machine, large-format production printer.

Working hour is from 9am to 5.45pm (Mon to Fri); 9am to 1pm (Sat); Rest day (Sun & PH).

Interested party, please whatsapp Eric @92744949 or email to [email protected]

Responsibilities:

• In charge of Renewable Energy Biomass Boiler ,Steam Turbine and ancillary units operation and maintenance.
• Bio-mass Fuel arrival co-ordination.
• Control and check-up all the operation parameters and safety system in boiler , Steam turbines and ancillary units.
• Report to the Plant Supervisor/Engineer, immediately in case of any break down and other Emergency problems at any time.
• Fill up the check list and log sheet with proper supervision.
• Plant Safety and House keeping.
• Involve in plant routine maintenance.
• Involve in operating the equipment and hands-on manual work to enable smooth flow of work.
• Boiler and Feed water quality analysis.
• Chemical dosing supervision.
• Ensure proper shift hand over to their fellow colleagues.
• Any other adhoc duties as and when delegated by Plant Engineer and the Management.

Requirements:

• Minimum Secondary education or graduated from ITE in Mechanical or Electrical
• Ability to exercise initiative and follow instruction given
• Computer literate and able to write and communicate in English
• Willing to work on 12 hour shift pattern (day or night shift)
• Candidates who have attained class 1 or 2 Boiler Attender certification will be an added advantage

a) Collaborate with stakeholders to gather requirements, understand and document business needs, business requirements and flows related to the Authority’s public services and application systems;

b) Review business rules and service journeys, gathering requirement specifications, engaging stakeholders, creating user journey maps and wireframes, and providing support on updates to the Authority;

c) Develop user stories, specifications, acceptance criteria, and create detailed process maps to visualise, understand and streamline current workflows and business processes;

d) Review design specifications and project deliverables (e.g. monthly project report, log review for privileged user access, test plan, test reports, application design/ code) to ensure the completeness for the Authority’s acceptance;

e) Understand and review source codes from vendor(s) for deployment;

f) Support and review on-site acceptance and System Integration Testing

(SIT);

g) Facilitate and support User Acceptance Test (UAT) and trainings for users;

h) Conduct technical review and assessment of End of Support (EOS) upgrade proposals before making recommendations to the Authority;

i) Coordinate, facilitate and support any audit to be conducted by the Authority’s appointed auditor(s) on the system;

j) Project management and governance, ensuring performance and fulfilment of contractual obligations by the Authority’s appointed contractor managing the collection system.

k) Provide maintenance and technical operations support for the Authority’s systems which include:

i. Perform continuous review and recommend improvement to the project, system managed by the Authority’s appointed contractors or business processes of the Authority’s systems.

ii. Manage, review and ensure compliance by the Authority’s appointed contractors on the Authority’s policies, security advisories, vulnerabilities, circulars, Government Instructions Manual requirements, polls, etc. issued and applicable for the Authority’s systems;

iii. Review and validating test cases and results for enhancements to ensure that requirements are met; and

iv. Develop and maintain documentations related to the works performed.

l) Reviewing impact analysis of all system modifications or new requirements on the functionality, performance, and security of the systems, which includes:

i. Collaborate with business stakeholders and work closely with external parties, ICT providers or government agencies for systems operational and maintenance works and new initiatives/enhancements;

ii. Involved in the review and tracking the activities of the Service Request life cycle; and

iii. Review of contractor’s man-efforts and solutioning.

m) Work closely with external parties, ICT providers or government agencies for the operational and maintenance works and new initiatives/enhancements of the Authority’s systems;

n) Performing hands-on development as part of exploration of new technologies/products and automation of existing processes;

o) Participate and support in incident, troubleshooting, testing and verification of reported issues, incidents and to follow up with the Authority’s appointed contractors, stakeholders and business users to ensure timely escalation where required and completion and closure of the issues or incident; and

p) Ensure that the deliveries of the project by the Authority’s appointed contractors are compliant with relevant policies and guidelines and to identify and close any compliance gaps.

2. The Three (3) Onshore IT System/Business Analysts proposed by the Contractor shall have at least 3 years of IT experience and the following qualifications and experiences:

a) Bachelor’s degree in Computer Science, Information/ Infocom Technology, or related discipline would be preferred;

b) Strong knowledge in application support and maintenance and possesses hands-on’ knowledge and experience in end-to-end Software Development Life Cycle;

c) Experience in IT project implementation, specifically on user requirements gathering, IT business analysis, applic1ation solutioning, UI/UX design and using automated testing software such as Tricentis TOSCA would be an added advantage;

d) Experience in the following would be advantageous:

i. Cloud platform and technology;

ii. Application development using Power builder, Java, Delphi or ASP.Net; and

iii. Government projects.

e) Experience with stakeholder management;

f) Have a positive attitude and good interpersonal skills, able to work and communicate effectively with stakeholders to ensure business needs are met; and

g) Experience in working under minimal supervision and to demonstrate ability to ensure tasks are well completed and project is on schedule.

• Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
• Programs lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
• Sets-up lathes and adjusting three- and four-jaw chucks, tools, and attachments.
• Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to Drawing Requirements.
• Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions;
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents actions by completing production and quality logs.
• Maintains safe operations by adhering to safety procedures and regulations.
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

a) Collaborate with stakeholders to gather requirements, understand and document business needs, business requirements and flows related to the Authority’s public services and application systems;

b) Review business rules and service journeys, gathering requirement specifications, engaging stakeholders, creating user journey maps and wireframes, and providing support on updates to the Authority;

c) Develop user stories, specifications, acceptance criteria, and create detailed process maps to visualise, understand and streamline current workflows and business processes;

d) Review design specifications and project deliverables (e.g. monthly project report, log review for privileged user access, test plan, test reports, application design/ code) to ensure the completeness for the Authority’s acceptance;

e) Understand and review source codes from vendor(s) for deployment;

f) Support and review on-site acceptance and System Integration Testing

(SIT);

g) Facilitate and support User Acceptance Test (UAT) and trainings for users;

h) Conduct technical review and assessment of End of Support (EOS) upgrade proposals before making recommendations to the Authority;

i) Coordinate, facilitate and support any audit to be conducted by the Authority’s appointed auditor(s) on the system;

j) Project management and governance, ensuring performance and fulfilment of contractual obligations by the Authority’s appointed contractor managing the collection system.

k) Provide maintenance and technical operations support for the Authority’s systems which include:

i. Perform continuous review and recommend improvement to the project, system managed by the Authority’s appointed contractors or business processes of the Authority’s systems.

ii. Manage, review and ensure compliance by the Authority’s appointed contractors on the Authority’s policies, security advisories, vulnerabilities, circulars, Government Instructions Manual requirements, polls, etc. issued and applicable for the Authority’s systems;

iii. Review and validating test cases and results for enhancements to ensure that requirements are met; and

iv. Develop and maintain documentations related to the works performed.

l) Reviewing impact analysis of all system modifications or new requirements on the functionality, performance, and security of the systems, which includes:

i. Collaborate with business stakeholders and work closely with external parties, ICT providers or government agencies for systems operational and maintenance works and new initiatives/enhancements;

ii. Involved in the review and tracking the activities of the Service Request life cycle; and

iii. Review of contractor’s man-efforts and solutioning.

m) Work closely with external parties, ICT providers or government agencies for the operational and maintenance works and new initiatives/enhancements of the Authority’s systems;

n) Performing hands-on development as part of exploration of new technologies/products and automation of existing processes;

o) Participate and support in incident, troubleshooting, testing and verification of reported issues, incidents and to follow up with the Authority’s appointed contractors, stakeholders and business users to ensure timely escalation where required and completion and closure of the issues or incident; and

p) Ensure that the deliveries of the project by the Authority’s appointed contractors are compliant with relevant policies and guidelines and to identify and close any compliance gaps.

2. The Three (3) Onshore IT System/Business Analysts proposed by the Contractor shall have at least 3 years of IT experience and the following qualifications and experiences:

a) Bachelor’s degree in Computer Science, Information/ Infocom Technology, or related discipline would be preferred;

b) Strong knowledge in application support and maintenance and possesses hands-on’ knowledge and experience in end-to-end Software Development Life Cycle;

c) Experience in IT project implementation, specifically on user requirements gathering, IT business analysis, applic1ation solutioning, UI/UX design and using automated testing software such as Tricentis TOSCA would be an added advantage;

d) Experience in the following would be advantageous:

i. Cloud platform and technology;

ii. Application development using Power builder, Java, Delphi or ASP.Net; and

iii. Government projects.

e) Experience with stakeholder management;

f) Have a positive attitude and good interpersonal skills, able to work and communicate effectively with stakeholders to ensure business needs are met; and

g) Experience in working under minimal supervision and to demonstrate ability to ensure tasks are well completed and project is on schedule.

Responsibilities

1. Perform machine inspection and maintenance.
2. Troubleshoot, repair and/or perform machine and components’ parts overhaul
   1. Able to remove and install machines’ components
   2. Able to evaluate and recommend parts replacement
3. Troubleshoot engine, hydraulic and transmission systems.

Requirements

1. Minimum NITEC / Diploma in Mechanical / Electrical / Automotive Engineering
2. Minimum 5 years’ working experience on construction machinery.
3. Ability to troubleshoot electrical and electronic system will be an added advantage.
4. Basic computer literacy

Job Description:

· Support the Shift Leader in pre-commissioning, commissioning, greenfield start-up planning, punch listing, site walk and equipment inspection.

· Support the Shift Leader in handling start-up, shutdown, daily operation and plant turnaround activities.

· Perform routine production activities such as sample collections, in-process quality testing, plant patrols & data logging, chemical preparations, and loading & unloading of chemicals.

· Perform troubleshooting to resolve operational issues and provide support to technical and maintenance teams.

· Monitor and inspect equipment and instruments and when required, take corrective actions to maintain safe and optimal operation of the process plant.

· Prepare equipment for safe handover to maintenance.

· Read production schedules, shift logs, analytical results and technology team recommendations to determine changes to equipment control and process adjustments.

· Update operating procedures and prepare maintenance package documentation for equipment maintenance activity.

· Perform Permit to Work (PTW) job site risk assessment, and issue PTW to achieve safe work executions.

· Perform emergency response in areas of firefighting, rescue, and loss containment.

· Perform housekeeping in the process area.

· Support efforts to improve profitability, safety, and reliability of facility.

· Provide mentorship to junior technicians.

Requirements:

· NITEC or Higher NITEC in Chemical Process Technology, Chemical Technology or Diploma in Chemical Engineering with 1-3 years of relevant experience in the petrochemicals industry

· Recent graduates with strong academic results but without job experience may be considered too.

· Self-motivated and effective team player with good communication skills

· Basic understanding of industry HSE practices & process safety risks of petrochemical plants

· Proficient in Microsoft Office applications

· Able to perform 12 hours rotating shift work on Jurong Island

KEY DUTIES AND RESPONSIBILITES:

• Perform receipt of incoming raw and packaging materials.
• Maintain and update documents related to Delivery- Acknowledge, Goods Receipt Note along with supporting documents.
• Ensure that materials are kept as per the storage conditions.
• Perform dispensing and sieving of raw materials for production use.
• Perform cleaning of accessories used and the dispensing booth I area after completion of the dispensing / sieving activities.
• Issue packaging materials for packing use.
• To give the planned output dispensing and sieving of raw materials.
• Regularly verify physical stock, review against system stock and identify discrepancies.
• Perform performance checks for the weighing balances as required). Coordinate for calibration / preventive maintenance for all Warehouse equipment and instruments.
• Intimate and follow up with Maintenance department for breakdown rectification of Warehouse equipment.
• To ensure maintenance of Warehouse area and equipment in the state of cleanliness as per SOP.
• Assist in performing routine check and ensure proper cleaning of premises by contract cleaner.
• Assist in investigation in case of any process deviation, non-compliance.
• To carry out preventive and corrective actions for observed non-conformances.
• Assist in installation and qualification of Warehouse equipment.
• Ensure compliance to GxP /Safety/ HSE / Quality policies.
• To coordinate with QC for sampling of raw and packaging materials. Arrange sampling activity and cleaning of sampling booth.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• A good team playerwith positive learning attitude.
• Willing to work in Tuas area, in warehouse and dispensing environment.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Warehouse/ Logistics or relevant disciplines
• Preferably with 3 years' relevant experience in pharmaceutical manufacturing warehouse/ store operation.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities:

- To perform job assignments by selecting, using and maintaining various service tools correctly.

- To perform installation of electrical switches, sensors, transducers, transmitters, current transformers, alternator components, control panels, etc.

- To perform installation of engine wiring as accordance with the drawings provided.

- To disassemble and assemble engine components i.e. oil pump, water pump and cylinder head, etc.

- To perform engine valve lash adjustment.

- To assist and perform mechanical works i.e. installation of radiator assembly, couplings, engines, alternators, gearbox, piping, hoses, etc.

- To assist and perform alignment works for radiator assembly, engine and alternator installation.

- To prepare generators for load test.

- To perform safety devices test and load test including the recording of the required parameter readings.

- To perform ET tool connection onto engine to view diagnostic codes and events and file date.

- To perform troubleshooting on engines and generators when problems arises.

- Knowledge of Hydraulic Staring System, Marine Gearbox, AC Power Alternator, alignment, control panel and testing will of advantage.

- To perform general servicing on engines and alternators.

- IT knowledge will be of advantage.

- Programmable Logic Control knowledge will be of advantage.

Requirements:

- Possess an ITE or equivalent.

- Minimum 5 years of relevant hands-on experience.

- Electrical hands-on experience is a must.

We are seeking a skilled and detail-oriented Service Technician to join our team. The ideal candidate will be responsible for diagnosing, repairing, and maintaining equipment or systems to ensure optimal performance. This role requires excellent technical expertise, problem-solving skills, and a

strong commitment to customer satisfaction.

Key Responsibilities:

• Perform installation, maintenance, and repair of [specific equipment or systems].

• Diagnose and troubleshoot issues with mechanical, electrical, or electronic systems.

• Conduct routine preventive maintenance to ensure equipment operates efficiently.

• Respond promptly to service requests and provide timely solutions to minimize downtime.

• Maintain accurate records of repairs, service requests, and inventory usage.

• Ensure compliance with safety standards and company policies during all tasks.

• Provide technical support and training to customers or team members as required.

• Recommend system improvements and upgrades to clients based on performance

assessments.

• Any other ad-hoc duties assigned.

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Reporting to: Manufacturing Supervisor

Roles & Responsibilities

• Operate assigned processing and/or packaging equipment according to the SOP, guides and manual
• Render correct cleaning and sanitation of processing equipment following Good Manufacturing practices
• Conduct checking and inspection of materials to ensure it meets specifications for processing and production of salts and dry part concentrates
• Prepare raw materials according to the plan and quality specifications
• Move raw materials and batch concentrate from staging area to processing area. This may require driving forktrucks and/or motorized and manual pallet stacker
• Perform product and packaged change over
• Perform SAP applications for transacting process order, good receipt and inventory
• Operate the system manually or with the aid of basic process automation
• Follow safe operation of dust collection system along with other Safety precautions and Safety criteria
• Perform Basic Equipment Care, troubleshooting and maintenance of the assigned machine to minimize inefficiency
• Perform 5S, routine cleaning for responsible areas
• Practice and adhere to current Good Manufacturing Practices (GMP), OE Eight (8) wastes and Continuous improvement (Kaizen) culture
• Perform Visual Management Board update, recording and documentation and maintenance of necessary operational records
• Ensure compliance with the Health and Safety Site System and ensure that a high standard of Health and Safety is always adhered to on site
• Any other ad Hoc duties and projects as assigned

Requirements

• Understanding of English Language, both written & spoken
• Ability to communicate effectively with all team members
• NITEC Certification or equivalent preferred
• Minimum 3 years of technical experience in F&B industry would be preferred
• Basic working knowledge in the production operations

Job Description – Service Technician

We are looking for a Service Technician in maintaining and managing system hardware and networks at customer site located over Singapore island to meet the contractual Service Level Agreement (SLA). The Service Technician shall report directly to the Service Engineer/Maintenance Lead (Reporting Officer (RO)) and Maintenance Manager (Approving Officer (AO)). Hiring shall be 1 year services contract via agent arrangement with option to extend or convert to direct outsource or permanent hiring.

Responsibilities

· Assist the RO in providing Preventive Maintenance (PM) and Corrective Maintenance (CM) tasks.

· Provide update and feedback on PM & CM work including maintenance documentation such as PM & CM checklist and status update to RO for maintenance report consolidation and generation to AO for review and final release to customer.

· Attend to and conduct on-site CM to faults reported/raised by customer on an ad-hoc basis including I-level & D-level testing and troubleshooting on equipment.

· Perform on-site PM to system equipment based on planned scheduled including O-level testing and sensors calibration to ensure optimal operational performance.

· Work with OEM on fault findings on-site and off-site including D-level components repair by sub-contractor

· Convey updates to RO on maintenance tasks progress.

· Review with RO and AO on maintenance processes and resources etc. for maintenance improvement.

• Perform any other related duties as assigned by RO/AO.

Requirements

· Holding recognised Professional Certificate such as Nitec/ Higher Nitec/ Diploma in Electronics/ Electrical/ Mechanical /Mechatronics/ Aerospace Engineering or equivalent from recognised institution; or at least 3-years working experiences in above mentioned engineering fields.

· Both local and foreigner as well as fresh graduate would also be considered.

· Advantage if have some knowledge and experience working with sensor, control, automation, and Information Technology (IT) system troubleshooting

· Resourcefulness and logical in problem-solving aptitude.

· Able to travel and work under non-conducive environment including site located at offshore island, buoys and in high security areas such as military base, and airport etc

· Ability to work as a team and occasionally independently.

· Ability to conduct on the job risk assessment and provide advisory to team member, RO and AO.

· Preferably holding a Class 3 driving license and familiar with Environmental, Health and Safety (EHS).

· Self-motivated, self-discipline and a service mindset with commitment and willingness to learn.

· Able to start work immediately or within a short notice is an advantage

• Field service work / Workshop repairs: attend site and perform field work, i.e. breakdowns, preventative maintenance, install and commissioning. Workshop tasks: dismantling, assembly, cleaning of parts and using of precision equipment and machinery and apply safety and health rules and taking into consideration the actual site conditions.
• Planning / Coordination: preparation and control of all material, equipment and documentation needed for site activities and organized them in accordance with contractual and supplement documentation.
• Repair: conducts detailed inventories and inspections to determine necessary maintenance and reports. Troubleshoots and repairs equipment and recommends changes such as new equipment or modified procedures to improve performance and customer satisfaction.
• Reporting: prepares all technical and work reports to be signed by customer representative.
• Customer Regulation: obtaining certain passes or attending classes for commencing of works.

The Early Mental Potential & Wellbeing Research Centre’s mission is to maximise every child’s mental and emotional capital by uplifting neurodevelopmental trajectories during early sensitive periods through interdisciplinary discovery science and translational technologies.

Toward this aim, we engage in 3 major activities and thrusts:

1) Core Discovery Research, Empowering Science: Basic neuroscience research and advanced computational models to understand individual neurocognitive potential, developmental trajectories, and risk and resilience factors;

2) Translation to Clinic & Pedagogy, Empowering Practitioners: Developing precision assessment and intervention tools to optimise parent-child social and mental health within clinical, education and community settings;

3) Translation to Real-World Technologies, Empowering Families: Creating scalable solutions and real-world technologies for parents to enhance their child’s mental and cognitive wellbeing at home.

We are looking for a Project Officer who will support EMPOWER’s Centre Director, Prof Victoria Leong, in providing assistance and managing administrative and operational aspects of the Centre’s various projects.

Key Responsibilities:

• Assist EMPOWER’s Centre Director and project leads in coordinating and managing the Centre’s ongoing projects. This includes tracking project timelines, deliverables, and milestones to ensure they are met on schedule.
• Provide daily administrative support for projects, including coordinating meeting schedules, preparing agendas, and taking minutes to ensure smooth project execution.
• Assist in following up on outstanding invoices and payments to ensure timely processing.
• Provide support in managing the Institutional Review Board (IRB) process, including tracking submissions, maintaining records, and ensuring compliance with ethical review procedures.
• Help prepare project reports, presentations, and other documentation for stakeholders as needed.
• Be proactive in learning and using various online tools and project management systems. Assist in setting up and maintaining these systems for tracking and reporting project progress.
• Ensure that all records are stored and organised systematically for easy retrieval when needed or for specific purposes.
• Help coordinate logistics for project-related events, workshops, and meetings.

Job Requirements:

• A strong Bachelor’s degree in Business Administration, Psychology or IT/Computing (non-exhaustive). Fresh graduates are welcome to apply.
• Demonstrates experience in project management, ideally with a background in local universities.
• Experience working with local & international collaborators or partners in a research or commercial context.
• Demonstrates strong organisational skills to manage multiple projects efficiently. Excellent attention to detail and a proven track record of keeping accurate records.
• Familiarity with Microsoft Office Suite (Excel, PowerPoint, Word) and experience with meeting scheduling software (e.g., Outlook, Zoom, Teams).
• Excellent written and verbal communication skills, with the ability to clearly convey information and interact with diverse stakeholders.
• Ability to quickly learn and adapt to new online systems, tools, and technologies relevant to project management.
• Collaborative mindset with the ability to work effectively within a team environment while also being able to work independently when needed.
• Experience in project coordination or administrative support in a research and academic setting is a plus.
• Interest in neuroscience or psychology research, and working with children, would be an advantage.

Candidates with a proven track-record in one or more of these areas / Fresh graduates are welcome to apply.

We will begin reviewing applications from Dec2024/Jan2025 onwards, until the position is filled, and regret to inform that only shortlisted candidates will be notified.