• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO-building shall have minimum five (5) years of relevan experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO-Geo shall preferably possess a Diploma from Polytechnic or relevant qualifications.
• The RTO-Geo shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• The RTO-Geo shall have a certificate in Building Construction Supervisors Safety (BCSS) Course.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

• Advising government agencies or specific industries on environmental standards and policies
• Managing or coordinating environmental protection projects and programs
• Assessing the current or potential impact that land use projects will have on the environment
• Creating and presenting environmental compliance training to companies or communities
• Inspecting municipal or industrial facilities to ensure operational safety and effectiveness and that the programs being used are in compliance with environmental regulations
• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Requirements:

• Candidate shall have minimum of 10-15 years’ experience in the process design of water / wastewater treatment (municipal and industrial)
• Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
• Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
• Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
• Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
• Utilize available resources and ensure timely completion of projects.
• Proficient in written and oral communication with good interpersonal skills.

ob Responsibilities :-

• Assessing the extent of motor vehicle repairs, restoration, or customization requests.
• Perform preparation works and vehicle spray painting jobs
• Sand down, cleaning of vehicle, preparing auto parts and other car components prior to performing spray painting job
• Administer mixing of colors to ensure color matching on all new and old vehicle body applications
• Carry out spray painting and polishing works in accordance with Company’s SOP
• Restoring damaged vehicles to their original condition by removing dents, mending parts, removing rust, repairing scratches, and spray painting panels.
• Accommodating customization requests.
• Maintain consistent high quality of work performance
• Other related duties assigned by superior

Job Requirements :-

• Minimum 1-2 years of working experience as an Automotive Painter Cum Panel Beater
• Ability to perform precise work that requires attention to details
• Willing to perform 5.5 working days

Role Title: Marketing Operations and Analytics Specialist

Location: Pasir Panjang, Singapore

Duration: 12 months contract

Hybrid Working Hours: 9am­ to 6pm

Salary Range: S$4,500 to S$7,300 (depending on experience)

Responsibilities

• Deliver full pieces of an analysis that is integrated into an overarching analytical outcome (e.g., research, experimental design using analytical tools to test hypotheses and draw conclusions, storytelling and consulting to business leaders to drive action, and designing data strategies for reporting and dashboards).
• Translate and refine business questions into tractable analysis and evaluation metrics.
• Plan and execute prioritized work including selecting appropriate methods to most effectively achieve analysis objectives.
• Develop roadmap, and track action plans and risk and issue logs to keep the analysis on track.
• Solve data­related questions based on information gathered on the business domain for effective decision­making.
• Identify and recommend creative ways to improve solutions to defined problems via selection of better analytical methods and tools.
• Apply proficient analytical, problem­solving, and research skills to provide market driven insights that have a moderate impact on business performance.
• Address commonly escalated issues and triage when required.
• Demonstrate strong research skills and awareness of state­of­the­art research methods.

Skills

· Knowledge of the management process of business operations for a given product, service, or domain.

· Ability to understand stakeholder needs through dialogue before conducting analysis and making recommendations.

· Ability to create dashboards to link, report, and analyze metrics based on available data. This includes the ability to prepare effective presentations in content and function, and to speak competently to the level of the audience.

· Ability to analyze information, draw conclusions, generate alternatives and solutions, and evaluate outcomes. This includes the ability to use data to add value to business planning and strategies.

· Ability to convert and/or uncover open-ended real world problems within the business context into trackable metrics or a structured analytical/statistical framework, as well as the ability to generate business-related insights from data analysis in a way that is meaningful to the stakeholders.

· Ability to develop, understand, and apply domain specific technical knowledge to complete assigned work, tasks, and support others in the organization.

· Knowledge of the principles and best practices of designing experiments to address issues or evaluate impact. This includes knowledge of design parameters, sampling strategies, data collection, and analytical techniques.

· Knowledge of advanced statistical methods used to analyze data. This includes the ability to identify and conduct appropriate advanced statistical analysis to evaluate sample adequacy, draw inferences, and solve a variety of data­related problems.

· Ability to influence and inspire an audience by crafting stories using data that elicit empathy or create buy­ in.

· Ability to quickly learn the general concepts and principles in a statistical and mathematical domain, solve or analyze issues or provide useful insights, and demonstrate interest and curiosity in acquiring knowledge across similar domains.

Who we are

We are a boutique management consulting firm offering Business Consulting, Advisory, and Technology services to our banking clients in the wealth space. We partner with our clients on large transformation projects and act as their delivery partners.

We are building a competency center with a high-potential team with niche skill sets. Our focus is to bring together, a diverse talent pool that will create perfect synergy in delivering the best possible solutions for the projects we undertake. We also aspire to provide an inclusive workplace where fresh talent can grow and achieve their full potential.

Job Description

The candidate must have 5+ years of experience in a Data Engineer role with a degree in Computer Science, Informatics, Information systems or similar fields.

Key responsibilities include:

· Designing and building scalable data pipelines to extract, transform, and load data from a variety of sources.

· Maintaining and optimizing existing data pipelines and automating data workflows such as data ingestion, aggregation, and ETL processing.

· Working with data analysts in Fintech space to understand data needs and design appropriate data models.

· Collaborating with cross-functional teams to integrate data pipelines with other systems.

· Ensure data accuracy, integrity, privacy, security, and compliance through quality control procedures.

· Monitor data systems performance and implement optimization strategies.

Minimum Qualifications:

· Strong development experience in at least two or more of the following languages: Python, Java, Scala, Go.

· Experience with working on large data sets and distributed computing in Enterprise using technologies like Hadoop, Spark, Hive, Kafka, etc.

· Proficient with building data pipelines and workflow management tools. Should have worked on Airflow, Nifi or related tools.

· Working knowledge of message queuing, stream processing systems like Kafka, Spark Streaming.

· Hands on experience working with NoSQL databases (like Cassandra, MongoDB, or Neo4j) and relational databases (like MySQL, PostgreSQL, or Oracle)

· Experience with data visualization tools like Tableau, Superset, or similar tools.

· Working knowledge of data quality, data governance, and data security principles.

Good to have:

· Experience with data science and machine learning tools and libraries (e.g. scikit-learn, TensorFlow, PyTorch, etc.)

· Cloud computing experience (e.g. AWS, GCP, Azure)

· Cloudera Certified Professional Data Engineer, IBM Certified Data Engineer, or similar certifications.

· Must be aware of data privacy and security concerns and regulations (e.g. GDPR, CCPA, etc.)

The Plattering Co is at the forefront of modern bespoke catering, known for its creative buffet menus and beautiful table styling. We are seeking a highly motivated and positive team player interested in part-time employment or hybrid work arrangements.

Key Responsibilities & Accountabilities

1. Recruitment:

· Proficient in screening, interviewing, and conducting reference checks to ensure alignment with company criteria, skills, experience, and cultural fit.

· Manage onboarding, encompassing document collection, offer letter preparation, work permit applications, attendance setup, on-site orientation, and probation support for new hires.

· Manage offboarding, including exit interviews, payroll calculations, and property return.

2. Compensation and Benefits:

· Prepare and process electronic bank uploads for payroll, including overtime, commissions, and bonuses, to ensure accurate and timely employee remuneration.

· Submit and verify statutory reports, including CPF and IRAS, to ensure seamless compliance with regulations.

· Conduct F&B industry market benchmarking to stay updated on industry trends and maintain competitive compensation strategies.

· Act as the primary point of contact for employees, addressing their pay and benefits inquiries promptly.

3. HR Information Systems (HRIS) / Payroll System:

· Manage new hire and resignee setups, administer timesheets, leaves, and benefits in the system.

· Continuously develop HR reports to enhance workforce data intelligence.

· Ensure compliance with regulatory and ethical guidelines when handling employee data.

4. Performance and Development Management:

· Identify KPIs and establish performance objectives for employees.

· Lead the performance appraisal process, ensuring timely and constructive evaluations for employees.

· Develop strategies to nurture high-potential employees with tailored growth opportunities.

· Build partnerships with academic institutions to create internship opportunities and attract a talent pipeline.

· Manage external course applications, vendor payments, and employee course completion verification.

· Recommend suitable courses for upskilling employees, leveraging available Government/Industry Grants.

5. Employee Relations (ER)

· Regularly review communication channels to ensure ample employee feedback options and identify employee relations opportunities and concerns.

· Develop, implement, and review HR policies and procedures for compliance and alignment with company values and objectives.

· Manage disciplinary, grievance, and other employee issues, providing recommendations to Management.

Qualifications

· Diploma/Degree in Business or Human Resource Management

Requirements / Experience

· 3-5 years HR Generalist experience, F&B industry a plus.

· Proficient in Tripartite Guidelines for Fair Recruitment.

· Familiar with Government regulations (e.g., CPF, IRAS, MOM).

· Strong interpersonal and communication skills for all levels and external parties.

· Thrives in a dynamic, fast-paced environment.

Key Responsibilities for Sales Executive

1. Build and maintain relationships with clients and prospects
2. Meet with potential clients to determine their needs
3. Handling customer inquiries and providing solutions
4. Preparing quotations and proposals for projects
5. Any ad-hoc tasks and duties as assigned

Qualifications for Sales Executive

1. Experience in sales and relationship management
2. Self motivated and goal oriented to deliver results
3. Strong verbal and written communicator
4. Excellent customer service and sales skills
5. Good negotiation and problem solving skills

Job Description

• Position Title: Sales Executive
• Working Location: Changi Business Park
• Working Hours: 5.5 days (Monday-Friday 8.30am-5.30pm, Saturday 8.30am-12.30pm)
• Salary Package: Basic Salary + Variable Bonus + Allowance
• Duration: Full Time

• Sweep and mop the floor, cleaning of toilets and handling of laundry
• Clear all cutleries, tables and linens after every meal
• Maintain the cleanliness of the premises’ doors, windows, furniture and fixtures
• Performing gardening maintenance and planting of various plants
• Work with garden hand tools and basic light machinery

Requirements:

• Able to work independently with minimal supervision

This is a 12 months contract based in Singapore, Working Location Central

Responsibilities

• Be an expert on enforcing standards and policies including some basic compliance policies
• Investigate reported escalations across multiple channels and respond to sensitive global partners inquiries
• Address traumatic, sensitive and potentially offensive content
• Communicate results of technical analyses with non-technical partners
• Gather, analyze and utilize relevant data and escalation trends to develop improvements to the overall escalation processes and provide recommendations for process, policy and product improvements
• Be comfortable dealing with high pressure escalations, grey areas and pulling in cross functional experts, when appropriate, to resolve issues swiftly while putting users first
• The role will require tight coordination with global cross-functional teams including Public Policy, Legal, Community Operations and others to problem solve and develop solutions
• Attention to details is a must — Remain up to date on key workflow changes, operational guidelines, policy updates and Community Standards
• Deliver projects involving quantitative analysis, industry research, and strategy development
• Utilize strategic tools, systems, and data to help the team analyze trends and deliver insights to define goals and improve processes

Minimum Qualifications

• 7+ years of experience managing large-scale operations
• Experience in investigations, internet safety or equivalent environment
• Ability to multitask different priorities in a rapidly changing environment
• Strong project management and operations skills
• Sound judgment and ability to thrive under pressure
• Strong conflict management and negotiation skills
• Ability to influence across functional boundaries globally
• Experience defining process and operational guidelines
• Proficiency in tools such as SQL and Excel to drive analytics and reporting

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

Civil Engineer, Ducts & Manhole (indoor office-based)

Salary up to $5200

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.

• To coordinate underground ducts and manholes implementation works with external parties.

• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter

• C&S engineering SME

Responsibilities:

• New Development and Diversion of Services:

- Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.

- Project Manage the implementation of underground ducts and Manholes within new development and service diversion.

- Review method statement and coordination drawings and other relevant construction documents.

• Review 3rd party submission on matters related to Netlink Underground Services

• Support Facilities and Maintenance team on Civil & Structural related issues.

• Participate in tender, contract administration

Requirements:

• Civil Engineering Degree with 3-year engineering/construction experience

• Diploma holders in Civil Engineering with extensive relevant experience will be considered

• Experience in infrastructure (Road works) projcts and its geotechnical aspects.

• Exposure in Service coordination with Authorities and Service providers

• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.

• Ablity to review Method statement. Ability to generate method statements is preferred.

To apply:

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check trial panel & mockup done on site and off site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings.
• To help resolve contractors’ queries and coordinate the works with other contractors.
• To inspect and assist with handing / taking over of completed works.
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works.
• To ensure that proper and updated records of all works, including records of variation works, tests, inspections, work progress, materials and equipment/machinery on site, labour safety, provisional quantities, dayworks, etc, are kept.
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site.
• To ensure that the contractors maintain safety, cleanliness and tidiness of the site at all times.
• To be conversant with all procedures in the Changi Aerodrome Manual, “Airside works Procedures Manual”, Airport Operational and Safety (AOS) requirements”, and Workplace Safety & Health Manual. To make conscious effort to be constantly updated on any subsequent revisions to the above-mentioned manuals, procedures and all applicable airport circulars.
• To adhere to the shift duty roster assigned by the Consultant or Resident Engineer.
• To carry out any other duties including administrative tasks as directed by the Superintending Officer / Consultant / QP (S) / QP (D).

Requirements:

• The RTO shall have minimum five (5) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in bored piling, and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation, etc.
• The RTO shall preferably possess a Diploma from Polytechnic or Workplace Safety & Health Coordinator or possess Advanced Certificate in Workplace Safety and Health or relevant qualifications.
• The RTO shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore.
• Good analytical ability with strong verbal and written communication skills. Competent in keeping and maintaining proper and updated site records on progress of work.

Landon Veterinary Specialists is a referral clinic established in 2012. We are seeking a Veterinary Receptionist to join our compassionate and tight knit team.

Your responsibilities will include:

• Greeting pets and their families
• Picking up phone calls and setting up appointments
• Receiving goods from suppliers
• Collecting payments
• Keeping the reception, consult rooms and surrounding areas clean
• Liaising between referring clinics and departments

This is a part-time position which may include weekend shifts.

Commitment for at least one-year is required.

About you

• Experience within the industry or a in a medical setting would be a bonus but not necessary
• Experience in a clinical setting is desirable
• Excellent phone manner
• Good spoken and written English
• Must be comfortable with handling small animals

If you enjoy being around pets and you want to play a part in providing the best care to animals, contact us for a chat at [email protected].

About Us

Paradigm Recruitment focuses on delivering high quality recruitment service in the Financial services space. Here at Paradigm Recruitment, we believe success begins with the first handshake, so let your first step to success be with us! Join us today if you are a driven person and have a passion in influencing people!

Highlights

1) High Commission Scheme

2) Hybrid work model

3) Carpark Allowance

Responsibilities:

• Utilise portals, referrals and internal database to identify suitable candidates for our clients
• Assess and respond to the needs of each client or mandate
• Brief candidates on the opportunities offered by the client
• Manage the full interview process
• Negotiate pay and salary rates and finalising arrangements between client and candidate
• Engage in business activities to acquire and maintain relationships with new and existing clients.

Requirements:

• Degree with at least 1 year of experience in recruitment sales
• CEI Certification is a must
• Excellent time management and organisational skills
• Persistent with positive work attitude

Interested Applicants, please click on Apply NOW.

We regret to inform you that only shortlisted applicants will be contacted.

EA Reg No: R1329095

EA License No: 21C0434

• Oversee food preparation, checking that all kitchen staff are performing their duties.
• Ensured that the production meet health, sanitation, and quality standards set by the company.
• Work with staff in areas of cleaning kitchen equipment and preventing damage and injury.
• Work with the cntral kitchen staff to ensure that central kitchen runs effectively, and have to be experts at ensuring food quality and maintaining kitchen equipment.
• Monitor equipments quality and make sure the the equipments are runing in good conditions.
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

• To review all Authority's and Contractor's drawings
• To provide all relevant endorsements required by the relevant authorities
• Supervise all civil, structural and geotechnical building works, both permanent and temporary
• To ensure that contractor had obtained all necessary permits and clearance to work
• To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures to protect surrounding structures
• Coordinate the contractor, AC, QP(D), and relevant agencies, including interfacing contractors and consultants etc for the works
• To review, evaluate and assess all formwork structures, formwork support systems etc
• To review and supervise safety, environmental and health matters
• To supervise the installation of instrumentation
• To supervise sanitary and plumbing installations, pump drainage works etc
• To review, evaluate and assess the monitoring of instrumentation and interpretation of the results and provide analytical results/presentations
• To review the Contractor's design and supervise all works

Criteria:

- Min 3 years of experience in Cut & Cover tunnelling or supervision of installation of monitoring instruments, collation of monitoring data and use of software for the presentation of monitoring data for analysis and interpretation.

- Diploma in Civil and Structural Engineering

- Possess a valid RTO cert by JAC of IES/ACES as QSS Singapore

Stand in rate to be discussed during interview.

Job Highlights

• Competitive salary and attractive commission
• Work in a dynamic and creative environment
• Training, mentoring and advancement in a fast growing company

Job Description

As a Customer Service Executive, you will be responsible for delivering exceptional service to our customers, sharing expert product knowledge and driving sales with enthusiasm and professionalism.

You will greet and assist our customers visiting the showroom, addressing their needs and preferences.

You will also manage and maintain a clean and organized showroom to enhance the shopping experience.

You will provide support via the hotline, including responding to messages, addressing customer questions or concerns, providing estimates based on their specific needs and requirements and scheduling site visits for customers.

You will attend to the client requests for servicing and coordinate the scheduling with our service team.

In addition, you will maintain records on the Customer Relationship Management (CRM) platform, ensuring accurate documentation.

What will the Right Person look like?

• Applicants with a Diploma/Degree in Business or related field, with a proven experience in retail sales or customer service related roles are welcome to apply.
• You can commit to work on Saturdays / Sundays.
• You have a passion for excellent customer service and sharing our products with the customers.
• You have excellent communication and interpersonal skills.
• You have a strong command in English and Mandarin (both spoken and written) as this role requires you to liaise with our internal and external stakeholders.

Spa therapy

we are looking for spa therapist in Singapore,have experience we will consider first, if not we can provide the training

hope can join us big family as soon as possible, and we are lovely working places,

please cont us 97229258.

Responsibilities

• Handling full set of accounts for companies assigned including handling invoicing, purchasing, payables, receivables, receipts, payments and bank reconciliations in compliance and adherence with policies and procedures.
• Ensure transactions recorded into the accounting system timely and accurately.
• Ensure timely month-end closing and able to analyze and articulate monthly performance variances.
• Coordinate with China HQ to generate report as per requirement.
• Assist in preparation of annual budget, forecasts, and cash flow projection.
• Prepare GST filing, liaise with the external auditor and tax agent
• Any other ad hoc duties as assigned

Qualification

• Diploma / Bachelor's degree in accounting, finance, or professional qualification (e.g. ACCA, CA Singapore)
• Strong knowledge of basic accounting principles and financial processes
• Proficient in using accounting software and Microsoft Office Suite (e.g., Excel, Word,Powerpoint)
• Excellent attention to detail and accuracy in data entry and record-keeping
• Strong organizational and time management skills, with the ability to prioritize tasks effectively
• Bilingual proficiency in English and Mandarin is a preferred, enabling effective communication with counterparts in China and international partners.
• Strong interpersonal skills, with the ability to collaborate effectively with team members
• Experience in audit is an added advantage.