Abbott is a global healthcare leader, creating breakthrough science to improve people’s health. We’re always looking towards the future, anticipating changes in medical science and technology.

Primary Function:

• Lead Food Safety risk assessment and quality records (QRs) for escalation on lines as per Global GMP lifecycle policy.
• Provides support and inputs to update Food Safety Policy and site HACCP.
• Provide support to the Manufacturing organization to facilitate the efficient operations within the production area.
• To optimize existing processes and to ensure that production goals are met. Ensures systems and processes to maintain GMP at workplace.
• Collaborate with Operations sub-functions in tracking critical production and cleaning parameters to track and collate responses for consumers/medical/affiliates escalations.
• Monitors performance of equipment, machines and tools and corrects equipment problems or process parameters that can produce non-conforming products.

Major Responsibilities:

• Responsible to Manage and focus directly on GMP food safety engineering/food security and validation, in preparation for the commercial production of regulated products.
• Support execution of projects related to food safety and optimization of existing manufacturing processes to deliver products with the production requirements consistent with Gold Standard Policies.
• Responsible for leak management and sanitation response during food safety events, including oversight for sanitation and verification activities.
• Ensures effectiveness of routine sanitation and cleaning activities.
• Train shopfloor technicians on food safety requirements
• Responsible to perform quality events investigation and coming up with CAPA action. Ensuring the effectiveness of CAPA action.
• Interface with other departments and suppliers to address root causes.
• Responsible to motivate and train employees for the facility and from third party as part of food safety program.
• Partner with Engineering on the installation, modification, upgrade and maintenance of manufacturing equipment. Co-Development of qualification and validation protocols.
• Execution of qualification and validation activities
• Lead incident reviews to investigate and correct microbiological non-conformities and provide recommendation regarding process design, product disposition and continuous improvement.
• Optimize the documentation for quality systems, cleaning and validation, SOPs, HACCP plans, and food safety policy and protocols.
• Ensures plant Food Safety documentation is maintained in an audit-ready state, meeting all statutory, regulatory requirements & customer expectations.
• Ensures the effective use of materials, equipment, and personnel in producing quality products at an effective operating cost.
• Responsible for compliance with applicable Corporate and Divisional Policies and Procedures.
• Prepares reports, publishes, and makes presentations to communicate findings.
• Implement, document, and maintain controlled, repeatable production processes.
• Understands the business needs of the company and has knowledge of the customer needs of our business.
• Cultivates internal and external network of resources to complete tasks.
• Any other duties as assigned by supervisor.

Requirements:

• Diploma/Bachelor’s degree in Process Engineering/ Mechanical/ Electrical/ Food Science/Biotechnology/Microbiology
• Minimum 3-5 years of related experience in quality/manufacturing/production, preferably in a GMP environment in food/pharma industry
• Able and willing to work on shift pattern (12 hours rotation shift)
• Preferably with knowledge in SAP system/POMS/MES.
• Preferably with knowledge about food microbiology, pathogens and food safety.
• Able to make fast decision and react efficiently to situation.
• Understands engineering principles, theories concepts, practices and techniques

*Kindly note this position is based in Tuas.

*This position will be working on shift pattern.

Follow your career aspirations to Abbott for diverse opportunities with a company that can help you build your future and live your best life. Abbott is an Equal Opportunity Employer, committed to employee diversity.

Sale Supervisor Job Duties

A sales supervisor typically has a wide range of responsibilities, which can include:

• Ensuring that employees have the tools and training they need to succeed in their jobs

• Building relationships with key clients and establishing long-term business partnerships with them

• Reviewing reports from managers to identify areas of improvement or new opportunities for growth in the company’s market share

• Establishing and enforcing company policies regarding customer relations, sales techniques, and ethics

• Developing and implementing training programs for new employees or existing staff members who are being promoted to new positions within the company

• Monitoring employee performance to ensure that they are meeting goals and adhering to company policies

• Managing a team of employees and ensuring that they are trained to perform their jobs effectively

• Reviewing customer orders and inventory to ensure that all customer needs are being met

• Conducting market research to identify new opportunities for growth in the industry

AbbVie (NYSE:ABBV) is a global, research-based biopharmaceutical company formed in 2013 following separation from Abbott. AbbVie combines the focus and passion of a leading-edge biotech with the expertise and capabilities of a long-established pharmaceutical leader to develop and market advanced therapies that address some of the world’s most complex and serious diseases.

We are offering an exciting opportunity on our Operations Development Program (ODP) in the area of Manufacturing and Engineering Services.

The Operations Development Program (ODP) is a global leadership development program. The ODP offers a formal three-year program, with three 12-months assignments in different areas of Operations including the option to do a Global Assignment. ODP assignments are crafted to develop exceptional functional and leadership traits, by working on a wide range of projects and gaining exposure to different leaders in the company.

The ODP is focused on developing high potential leadership talent for AbbVie Operations globally. This program combines hands-on experiences and career mentoring with technical and leadership training to accelerate professional development. Members will graduate with a diverse experience, technical ability, and the self-confidence to make remarkable impact for our patients.

The ideal candidate will have a strong interest in pursuing a career in manufacturing operations in the pharmaceutical industry.

Over the course of the three year program, you will be given extensive opportunities to develop both professionally and personally which will give you the required skills needed for future success within our organization. We will work with you to create a personalized development plan to serve as a step-by-step guide towards the experiences, knowledge and resources necessary to achieve your career goals.

As a member you will:

· Be a regular full-time employee of AbbVie

· Work on a variety of assignments and cross functional project teams within AbbVie’s operations departments such as; API, Bio Manufacturing, Engineering, Quality and Technical Operations

· Develop a well-rounded skill set through each of your assignments.

· Have the opportunity to visit and work in other AbbVie sites.

· Be paired with a mentor, who will provide you with support and guidance in the development of your career.

· Obtain training customized to support your individual growth and development.

· Report to an assignment manager for each rotation who will oversee your day-to-day responsibilities. Will attend an Annual Development Program summit in Chicago and will receive leadership training and networking opportunities in collaboration with other functional development programs.

If you possess the following attributes, we would like to hear from you:

· A Bachelor’s Degree with a GPA of 3.0/4.0 or 4.0/5.0 in Engineering, Science, or any related discipline

· A result oriented individual

· Excellent written and verbal communication skills

· Great interpersonal and communication skills with the ability to translate complex concepts into actionable data and presentation

· A Self-starter who can work independently and/or with large cross functional team

· Ability to multi-task and prioritize the key activities

· Demonstrated relationship management skills

· Innovation and Teamwork focused

· Excellent presentation skills that encompass clear, compelling communications tailored to different group of stakeholders

· Motivated team player, meticulous with good listening skills and an eye for detail

· Demonstrated ability to take ownership and be hands on

· Resourceful and problem solver

· Proficient with Microsoft Office Suite applications

• Manually abrades surfaces of metal or hard composition objects to remove adhering scale, grease, tar, rust, and dirt, and to impart specified finish, while using sandblasting equipment
• Paint surfaces with coatings, paints, , using brushes, spray guns and rollers
• Environmental Protection Agency (EPA) approved lead paint removal certification
• Operation and maintenance of sand blast equipment to achieve various anchor profiles
• Paint surfaces with coatings, paints, , using brushes, spray guns and rollers to the appropriate MIL-STD requirements
• Operate hand sanding machines
• Completing heavy body repair
• Frame machine operation
• Commercial/fleet painting
• Prepare sandblasting bays, chambers, portable units, booths or open areas and operating controls to blast a variety of metal and nonmetal surfaces

Requirements

• Working Hour : 7:30 - 5 pm (Monday – Friday )

: 7:30am – 1pm (Saturday)

• Support customer inquiries and troubleshoot complaints via various means (Emails/ Calls/ WA) in a timely manner
• Understand & explain company’s product and provide appropriate recommendations
• Provide prices and prepare quotes for customers
• Update and maintain accurate records of customer interactions / databases
• Proactively monitor customer’s orders and resolve issues before it becomes critical
• Work collaboratively with other departments to deliver customer’s request(s)
• Build, maintain good relationship with our customers and suppliers and ensure high customer satisfaction

Job Requirements:

• Excellent communication and interpersonal skills (Able to speak proficiently in different language)
• Strong problem-solving and analytical skills
• Ability to work independently and as part of a team

JOB TASKS AND SPECIFICATIONS

1. Execute strategies and customer engagement opportunities for key accounts in the specific industry sectors across Asia Pacific.
2. Assist in facilitating smooth implementation of contractual agreements.
3. Collaborate with different stakeholders to put together a plan of action for the clients and current supply chain business operations.
4. Monitor progress update of projects, initiate and implement process improvements to ensure project success.
5. Conduct research and market intelligence work to facilitate formulation of business development plans and strategies.
6. Assist in the preparation of proposals, quotations, presentations and solutions in timely manner and with utmost professionalism.
7. Tracking of KPI performance
8. Provide process improvement and optimization support relating to Logistics Data Management
9. Assist in Data and Statistical Analysis.
10. Perform other job related functions as assigned.

REQUIREMENTS

• Candidate must possess at least Diploma and above in any field
• Competent in English and Mandarin language (spoken and written)
• Good exposure in business presentation. Savvy with presentation software
• Proficient in MS. Office, Excel, PowerPoint and computer knowledge
• Excellent interpersonal and communication skills.
• Fresh graduates welcome to apply
• Meticulous and have a can-do attitude

Only with 3PL experience may apply.

Salary shall commensurate with relevant experience.

We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES & DUTIES

• Assist the Production Manager in the scheduling of all incoming jobs and ensure close monitoring and timely delivery.
• Assist the Production Manager in taking charge of all coating (HVOF and Armoloy) jobs and ensure delegation and coordination on the necessary works.
• Understand the full requirements of all manufacturing, servicing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Ensure all budgets and plans are met.
• Assist the Production Manager to monitor and manage workshop loadings, direct labour hours, overtime, rework, scrap, on time deliveries, downtime, work efficiencies and ensure all measurements are within plans.
• Attend weekly production meeting to provide status update to all relevant departments and iron out related production issues.
• Assist the Production Manager to work closely with all Production Supervisors to formulate shop floor production plans and optimize production hours and weekly planned hours ensuring on time delivery.
• Identify the skill level of each reporting employees and distribute suitable work tasks to achieve higher throughput.
• Manage and resolve grievances and conflicts arising. Motivate employees to boost their morale.
• Work with Production Manager, Engineering Manager, General Manager and HR department to develop, implement and conduct training to enhance the competency or upgrading of skills for production employees.
• Conduct annual performance appraisal for all reporting employees.
• Work closely with the QHSE Manager/ MR to resolve quality issues.
• Perform review on PCR and work closely with the sales, engineering and quality department or customer to clarify all technical specifications and job requirements.
• Assist the Production Manager in resolving bottleneck situations and determining root cause, corrections and corrective actions for internal rejection and scrap.
• Assist the Production Manager in initiating purchase requisition for any requirements.
• Assist the Production Manager in preparing monthly reports whenever required.
• Work closely with all departments to resolve any arising issues.
• Assist the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Accountability

• Control, lead, develop and motivate all reports.
• Monitor and ensure on time delivery of finished product.
• Minimize rework and rejection rate.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.
• Report all unsafe acts, infrastructure and environment to his Manager.

QUALIFICATION & EXPERIENCE

· Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.

· Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

RESPONSIBILITIES & DUTIES

§ Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.

§ Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.

§ Generate PCR and manufacturing process plan.

§ Generate engineering drawings and perform drafting.

§ Support Asst. Engineering Manager on the job costing.

§ Continuously explore for new manufacturing method or new external providers to support the production.

§ Work closely with the Production Supervisor to resolve any production issue.

§ Support the procurement department to deal with external providers on all technical issues.

§ Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.

§ Follow safe work practices and procedures.

§ Ensure company and QHSE policies and procedures are adhered to at all times.

§ Participate/ attend all functions, activities and meeting organized by the company.

§ Perform other assignment and duties as and when required.

§ Welcome Fresh Gradutes

about the job

Reporting to the HR Lead, you will manage the full cycle of payroll activities and supporting HR processes, including but not limited to:

• Manage payroll process for the company, calculation of salary details, government claims
• Manage employee letters, reference letters, background checks, mandatory training, etc.
• Manage work pass renewal processes
• Manage employee data

other information

• 5 day work week
• Office location: Central-West, Singapore
• Headcount: 300+
• Immediately available/ short notice preferred but not a requirement

skills and experience required

• Relevant experience in processing end to end payroll
• Strong knowledge in MOM laws and regulations
• Good verbal and written communication skills
• Good interpersonal skills to manage relevant stakeholders
• Proficient in Microsoft Excel and Word

To apply online please use the 'apply' function.

Nanyang Business School (NBS) provides a vibrant intellectual environment that fosters world-class innovative, cutting-edge research.

This Project Officer position is based in the the Leadership, Management, and Organization Division in the Nanyang Business School, Nanyang Technological University. The division includes scholars who conduct world-class research on organisational behaviour, culture and cultural intelligence, leadership, human resource management, and communication management.

The Project Officer will be working closely with Asst Prof Chong Sin Hui on research related to work-life management, career management, life-long and life-wide learning, and mid-career transitions.

The completion of these tasks will contribute to the timely collection of high-quality data to advance knowledge of how to support mid-career learning and optimize work-life management among Singaporeans.

Key Responsibilities:

• Completing research administrative tasks such as IRB application, participant management, scheduling of data collections, participant payments, website management, references and citations management, etc
• Assisting in research development and design
• Conducting focus group discussions with selected samples
• Transcribing, coding and analysing focus group discussions on work-life management, life-long and life-wide learning, and career management
• Designing and creating surveys on online survey platforms such as Qualtrics
• Managing data and assist with statistical analyses
• Collaborating effectively with Asst Prof Chong and other research team members consisting of faculty, PhD and undergraduate students

Job Requirements:

• Bachelor’s Degree in Psychology, Business, Sociology, or Public Policy
• Excellent oral and written communication skills in English are essential to conduct research
• Basic knowledge of or prior experience with qualitative research (e.g., what it is, how it is conducted and analyzed, etc.)
• Working knowledge of research softwares or websites such as SPSS, Excel, Qualtrics, and Endnote
• Interest in organizational behavior or organizational psychology research on work-life management, career management, life-long and life-wide learning, and workforce reentry
• Ability to communicate with participants professionally to facilitate focus group discussions
• Familiarity with Singapore’s workforce skill development landscape, such as having basic knowledge of schemes like SkillsFuture, etc
• Willingness to learn research statistical and analytical skills on the job

This position is a 6-month contract position. It would be especially relevant and developmental for individuals who are interested in pursuing a postgraduate research degree in Business or Social Sciences in future, as you will receive the opportunities to acquire research skills on the job.

Interested applicants are invited to submit a cover letter, full CV and names and contact details of three referees in one document. Enquiries about this position can be made to Asst Prof Chong Sin Hui ([email protected]). Review of applications will begin on 1 Nov 2024.

We regret to inform that only shortlisted candidates will be notified.

Candidate will assist faculty member in Engineering Physics teaching or teaching-related duties, including but not limited to the conducting of tutorial lessons, developing teaching materials, grading assignments and providing formative feedback to students in their learning. He/She will also be required to assist the School in administrative work, as assigned during the term breaks. The School of Physical and Mathematical Sciences is committed to promoting gender diversity. In particular, we are looking for candidates who are able to inspire women undergraduate students to seriously consider careers in physics, engineering, and related professions.

Roles & Responsibilities:

• Creative Support: Collaborate with the Sales department to drive creative excellence across various projects, including packaging, promotional materials, and digital content.
• Concept Development: Assist Creative Leads in the ideation and creation of visually compelling content for social media, videos, brochures, flyers, name cards, banners, beach flags, and other marketing collateral. This includes digital imaging, video editing, pre- and post-production, and traditional artwork.
• Team Collaboration: Partner with Account/Project Servicing to support weekly job planning, attend daily briefings, and contribute to the execution of both traditional and digital advertising projects.
• Project Monitoring: Monitor project progress, providing updates to the Creative Manager, and ensuring that deadlines are met.
• Innovative Execution: Bring innovative technological ideas to life, support creative processes, and foster a team-centric culture. Collaborate effectively with external creatives, digital/web/app developers, and production associates.
• Skills Development: Stay current with the latest creative tools and software, recommend learning opportunities, and support the growth of junior team members alongside Creative Leads.
• Efficient Delivery: Ensure all assigned creative deliverables are completed accurately, on time, and to the highest standard.
• Ownership & Adherence: Take ownership of creative projects from concept to completion, adhering to brand guidelines.
• Comprehensive Design: Conceptualize and design graphics for a wide range of marketing materials, ensuring alignment with brand guidelines from initial concept through to production.
• Cross-Functional Collaboration: Work with product designers, marketers, and copywriters to develop materials that highlight key features and resonate with our target audience.
• Mock-Ups & Production: Create mock-ups, datelines, and print-ready files for various marketing materials, ensuring high-quality and accurate output. Review and approve proofs to maintain quality control during the printing and production process.
• Market Research: Conduct market research to stay updated on current design trends and competitor strategies across various formats.
• Feedback Incorporation: Incorporate feedback from stakeholders while balancing creative vision and brand consistency.
• Compliance: Ensure all designs comply with regulatory and legal requirements in various global markets.
• Vendor Collaboration: Work with external vendors and suppliers to ensure all materials are produced to the highest standards.

Pre-Requisites:

• Proven experience in a senior design role, with a strong portfolio showcasing your work.
• A minimum of 5+ years of proven experience in graphic and packaging design, preferably in the technology or consumer goods sectors.
• Intermediate knowledge of the mass printing industry.
• Expert-level proficiency in the Adobe Creative Suite.
• A keen eye for detail and a passion for pushing beyond the expected.
• Ability to collaborate effectively with cross-functional teams.
• Strong communication and collaboration abilities for working with internal teams and external partners.
• Strong problem-solving skills and attention to detail.
• Ability to multitask and prioritize workload effectively.
• Knowledge of 3D rendering and mock-up tools is a plus.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Leica Microsystems is one of the market leaders in the fields of microscopy, imaging, and analysis. We reveal the invisible and empower our customers to create a better and healthier world. Together with our customers, we transform scientific discovery. We empower surgeons to take well-informed decisions in life-changing procedures. We enable users to gain insights which help answer key questions concerning development and engineering. All of this is achieved with the combination of cutting-edge microscopes and AI-based image analysis. Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently looking for a Business Analyst: Sales and Master Data based in Leica Instruments Singapore (LIS) Office.

Come join a fantastic team! We are seeking a highly analytical and detail-oriented Sales and Master Data Analyst to join our global team. In this role, you will be responsible for managing and analyzing sales data, maintaining master data within SAP, and leveraging tools like Power BI and Excel for reporting and insights. You will work closely with BU Medical, Service , finance, and IT teams to ensure data accuracy, consistency, and availability for strategic decision-making.

YOUR RESPONSIBILITIES

• Master Data Management: Oversee the global master data lifecycle processes, including creation, validation, and deactivation of data in SAP in alignment with the PhaseIn-PhaseOut process. Optimize data quality and reliability by applying pricelist updates and corrections in response to user requests.
• Sales Data Analysis: Collect, analyze, interpret, and visualize sales data to provide comprehensive and actionable insights on sales performance, trends, attachment rates, and more; to support global BU Medical stakeholders, including senior management.
• Cross-functional collaboration to support business requests, maintain data integrity and suggest or support process improvements in relation to MDM, lifecycle management or business analytics.

YOUR PROFILE

• Bachelor's degree in Business, Information Systems, Data Analytics, or a related field.
• 4+ years of experience in data analysis, sales operations, or master data management .
• Proficiency in SAP for master data management and advanced skills in Power BI and Excel for data analysis and reporting

WHAT WE OFFER

• Global Exposure: Be part of a dynamic, global organization where you will collaborate with cross-functional diverse teams across multiple regions, gaining experience in international business practices and developing a global perspective.

GET MORE INSIGHT

Learn more about what we do and who we are by watching our company video “We Are Leica”:

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Job Requirements：

1. Assist in managing day-to-day HR operations (full spectrum) related to staffing.

2. Oversee and support the recruitment process, including interviewing, onboarding, and training new employees.

3. Support the implementation of performance appraisals and assist managers in assessing employee performance.

4. Provide guidance on goal setting, development plans, and performance improvement actions.

5. Maintain records of employee performance and ensure consistency in evaluations.

6. Track employee progress post-training to ensure effectiveness.

7. Ensure HR policies and procedures are followed and aligned with current labor laws and organizational goals.

8. Monitor adherence to workplace health, safety, and legal regulations.

9. Assist in updating employee handbooks and maintaining HR documentation.

10. Prepare regular reports on staffing levels, HR metrics, etc for management.

11. Contribute to developing HR strategies aligned with the overall organizational goals.

Job Requirements：

1. Bachelor’s degree in Human Resources, Business Administration, or related field.

2. Additional HR certifications (CIPD, SHRM-CP, IHRP-CP, IHRP-SP, etc.) are a plus.

3. At least 5 years of experience in Human Resources, with a focus on staff management or employee relations.

4. Ability to mediate and resolve conflicts professionally.

5. Willingness to continuously update knowledge on HR best practices and labor law changes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Summary: We seek a highly motivated and skilled technician to join our growing team. You will play a crucial role in supporting the deployment of automation solutions and ensuring the successful installation of our projects regionally.

Responsibilities

1 Communicate with engineers to ensure that services are delivered effectively.

2 Handle mechanical assembly based on the provided drawings

3 Prepare electrical panels based on the provided drawings

4 Perform simple mechanical and electrical repair of installed machines

5 Support with scheduled preventive maintenance and upkeep of installed machines

6 Support with installation & commissioning of new equipment onsite

7 Support with fabrication & wiring during project execution

8 Travel to customer sites to support with service enquires whenever needed

9 Keep up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner

10 Maintain in-house stock and inventory for robot maintenance

11 Performs ad-hoc duties as assigned by the manager

Requirement

1 Diploma in mechanical engineering, electrical engineering or a related field

2 Excellent hands-on skills in mechanical assembly, soldering, crimping, etc

3 Knows how to handle electrical tools like crimpers, wire strippers, ferrules, etc.

4 Must be good in handling mechanical tools such as drills, taps,

5 Basic knowledge of Linux commands will be a bonus

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Build and maintain relationships with relevant stakeholders in assigned countries, increasing the team's understanding of the business' operations and internal control plans
• Conduct audits of the company's financial, operational, and information systems, including social compliance audit to ensure compliance with established codes, policies and procedures
• Plan and evaluate the effectiveness and adequacy of internal controls, policies, and procedures
• Identify, analyse any potential areas of risk, control gaps, and develop a risk mitigation plan and control gap remediation recommendations to the business
• Prepare and present audit reports to the management and headquarters
• Conduct presentations and training to increase awareness of governance frameworks
• Implement new audit initiatives to maintain, develop and improve internal control, risk management and governance frameworks
• Assist with the development of policies and procedures to ensure compliance with industry standards and regulations
• Any other adhoc projects assigned

Job Requirement

• Bachelor's degree in Accounting, Finance, or relevant fields and qualifications in ACCA/CPA/CIA/CISA/CFE/CCEP
• At least 4 years of experience in internal auditing, risk management
• Have had commercial and/or Big 4 internal audit experience
• Experience in the manufacturing industry would be beneficial
• Knowledge of legal and compliance will be added advantage
• Proficient in Excel, PowerPoint, or MS Office, experienced in data analytics
• Displays qualities of a proactive and team-oriented individual
• Excellent communicator with strong presentation and influencing skills
• Willingness to travel internationally
• Knowledge of ESG (Environmental, Social and Governance) strategy and corporate sustainability is advantageous.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Key Responsibilities:

• Provide daily general cleaning & housekeeping services for office area which include working areas, washroom, pantry areas, meeting rooms and common areas (i.e. walkways, staircases, landscape areas).
• Assist in preparing and serving of light snacks, fruits and drinks/beverages to visitors/guests whenever required.
• Keep the office pantry area clean & tidy and maintaining the general cleanliness of kitchen appliances and cleaning equipment in a safe and efficient manner.
• Refilling and restocking of cleaning supplies and toiletries (hand wash, toilet paper, paper towels etc) and pantry supplies (biscuits, beverages etc).
• Maintaining cleaning products and pantry supplies and update HR & Admin department to order new supplies when necessary.
• Daily clearing of waste bins and dispose all the rubbish from office to designated areas.
• Watering and maintenance of plants.
• Any other general cleaning duties and ad hoc duties as assigned.

Key Requirements

• Prior office housekeeping/cleaning experience is advantageous.
• Good communication and interpersonal skills.
• Able to multi-task and work independently.
• Positive attitude, committed, hardworking and responsible.
• Suitable for mature workers who are staying in Jurong West vicinity.
• Able to start immediately or at a short notice.
• Working Hour: Monday to Friday, 830am to 6pm (inclusive of one hour lunch break).

Interested applicants can WhatsApp or Call +65 9684 1509

Job Description & Requirements

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description & Requirements
Roles & ResponsibilitiesJob Requirement & Description:· Possesses Class 3 or class 4 Driving License. Min 2 years’ experience preferred· Possesses at least more than 2 years of driving experience are also welcome to apply· Have experience in driving 10ft/ 20ft lorry/ Prime Mover· Ability to commit to 6 days work week & willing to work overtime· Daily delivery service & handle daily routes and millruns· Ensuring proper endorsements and documentations is completed· Salary commensurate with driving experience and shift flexibility· Familiarity with handling temperature-controlled life science products or Air products· Familiar with Singapore Roads· Ability to read, write, communicate and understand English· Good natured/ positive· Adhoc collection/ deliveries

2. SKILLS