1. Job Description

• Mix and bake ingredients to produce bread ,rolls ,cookies , pies or other baked goods

2. Job Task

• Measure and mix ingredients to make breads, rolls, pies and cakes
• Weigh materials in order to ensure appropriate quantity
• Ensure that oven temperature is in accordance to the type of product being baked
• Adjust thermostats in order to ensure that appropriate heat is being transmitted
• Remove baked goods from the oven and place on cooling racks
• Spread sprinkles and other decoration on baked goods
• Ensure that correct quantities of batches is being made
• Ensure appropriate storage of baking utensils and supplies
• Make sure that baking equipment is cleaned and maintained properly
• Ensure compliance with food safety standards
• Oversee cleanliness and sanitation of work area and equipment
• Manage inventory of supplies and order supplies before they run out
• Package baked goods appropriately and place pricing sticker

NOTE:

Candidates with higher skills in baking may be considered for our Senior Baker or Baker 1/2/3 positions after demonstrating exceptional performance and mastery of our baking techniques. If you are interested in exploring these opportunities, please highlight your relevant experience and skills in your application.

Job Description & Requirements

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

For over 170 years, Leica Microsystems has helped shape the future by developing groundbreaking optical and digital solutions. As a global leader, we’re driven by continuous improvement to excite our customers and to create the best work environment for our people. Customer focus, innovation, and teamwork are at the core of our culture and the foundation of our success.

Leica Microsystems is one of the market leaders in the fields of microscopy, imaging, and analysis. We reveal the invisible and empower our customers to create a better and healthier world. Together with our customers, we transform scientific discovery. We empower surgeons to take well-informed decisions in life-changing procedures. We enable users to gain insights which help answer key questions concerning development and engineering. All of this is achieved with the combination of cutting-edge microscopes and AI-based image analysis. Want to be part of a company whose products are part of cutting-edge research around the world? Join Leica Microsystems in our commitment for brilliant solutions and insight.

Leica Microsystems is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

We currently looking for a Business Analyst: Sales and Master Data based in Leica Instruments Singapore (LIS) Office.

Come join a fantastic team! We are seeking a highly analytical and detail-oriented Sales and Master Data Analyst to join our global team. In this role, you will be responsible for managing and analyzing sales data, maintaining master data within SAP, and leveraging tools like Power BI and Excel for reporting and insights. You will work closely with BU Medical, Service , finance, and IT teams to ensure data accuracy, consistency, and availability for strategic decision-making.

YOUR RESPONSIBILITIES

• Master Data Management: Oversee the global master data lifecycle processes, including creation, validation, and deactivation of data in SAP in alignment with the PhaseIn-PhaseOut process. Optimize data quality and reliability by applying pricelist updates and corrections in response to user requests.
• Sales Data Analysis: Collect, analyze, interpret, and visualize sales data to provide comprehensive and actionable insights on sales performance, trends, attachment rates, and more; to support global BU Medical stakeholders, including senior management.
• Cross-functional collaboration to support business requests, maintain data integrity and suggest or support process improvements in relation to MDM, lifecycle management or business analytics.

YOUR PROFILE

• Bachelor's degree in Business, Information Systems, Data Analytics, or a related field.
• 4+ years of experience in data analysis, sales operations, or master data management .
• Proficiency in SAP for master data management and advanced skills in Power BI and Excel for data analysis and reporting

WHAT WE OFFER

• Global Exposure: Be part of a dynamic, global organization where you will collaborate with cross-functional diverse teams across multiple regions, gaining experience in international business practices and developing a global perspective.

GET MORE INSIGHT

Learn more about what we do and who we are by watching our company video “We Are Leica”:

Are you interested to discover new opportunities in an innovative, team-oriented environment?

Do apply online - we are looking forward to your application!

Job Responsibilities

- Manage and lead procurement activities for supplies and services from vendors.

- Lead the competitive sourcing process, initiate requests for information/Quotation/Proposal, negotiate commercial terms.

- Execute all contractual matters of assigned projects and ensure that they are dealt with effectively.

- Monitor and analysis trends in spending and inventory control and make recommendations to identify areas for saving.

- Other adhoc matters assigned by the Management.

Requirements

- Min 3 years of relevant experience

- Has experience in managerial role, preferably in the F&B industry

- Good leadership and people management

- Knowledge of MS Office (Google Drive)

- A positive work attitude and willingness to learn and contribute

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- High degree of commitment and a good team player

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

Job Responsibilities

- In-house design for company’s collateral

- Content creation for social media platforms such as Facebook, Instagram, YouTube


- Maintain company’s objective by generating inbound leads via Facebook Ads, Google Ads (Paid and Organic)


- Photography cum videography required at job sites for completed projects, followed by photo/video editing/production for content


- To handle online marketing eg Facebook, Instagram, and company website


- Responsible to assist in marketing planning and execution

Requirements:

- Knowledge in Adobe Photoshop / Illustrator / Canva

- Knowledge in social media marketing skills

Job Responsibilities

- Manage and lead procurement activities for supplies and services from vendors.

- Lead the competitive sourcing process, initiate requests for information/Quotation/Proposal, negotiate commercial terms.

- Execute all contractual matters of assigned projects and ensure that they are dealt with effectively.

- Monitor and analysis trends in spending and inventory control and make recommendations to identify areas for saving.

- Other adhoc matters assigned by the Management.

Requirements

- Min 3 years of relevant experience

- Has experience in managerial role, preferably in the F&B industry

- Good leadership and people management

- Knowledge of MS Office (Google Drive)

- A positive work attitude and willingness to learn and contribute

- Good interpersonal and communication skills

- Self-driven and highly-motivated

- High degree of commitment and a good team player

- Able to work under pressure and in a fast-paced environment

- Have initiative, independent and well-organised

Job Requirements：

1. Assist in managing day-to-day HR operations (full spectrum) related to staffing.

2. Oversee and support the recruitment process, including interviewing, onboarding, and training new employees.

3. Support the implementation of performance appraisals and assist managers in assessing employee performance.

4. Provide guidance on goal setting, development plans, and performance improvement actions.

5. Maintain records of employee performance and ensure consistency in evaluations.

6. Track employee progress post-training to ensure effectiveness.

7. Ensure HR policies and procedures are followed and aligned with current labor laws and organizational goals.

8. Monitor adherence to workplace health, safety, and legal regulations.

9. Assist in updating employee handbooks and maintaining HR documentation.

10. Prepare regular reports on staffing levels, HR metrics, etc for management.

11. Contribute to developing HR strategies aligned with the overall organizational goals.

Job Requirements：

1. Bachelor’s degree in Human Resources, Business Administration, or related field.

2. Additional HR certifications (CIPD, SHRM-CP, IHRP-CP, IHRP-SP, etc.) are a plus.

3. At least 5 years of experience in Human Resources, with a focus on staff management or employee relations.

4. Ability to mediate and resolve conflicts professionally.

5. Willingness to continuously update knowledge on HR best practices and labor law changes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Summary: We seek a highly motivated and skilled technician to join our growing team. You will play a crucial role in supporting the deployment of automation solutions and ensuring the successful installation of our projects regionally.

Responsibilities

1 Communicate with engineers to ensure that services are delivered effectively.

2 Handle mechanical assembly based on the provided drawings

3 Prepare electrical panels based on the provided drawings

4 Perform simple mechanical and electrical repair of installed machines

5 Support with scheduled preventive maintenance and upkeep of installed machines

6 Support with installation & commissioning of new equipment onsite

7 Support with fabrication & wiring during project execution

8 Travel to customer sites to support with service enquires whenever needed

9 Keep up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner

10 Maintain in-house stock and inventory for robot maintenance

11 Performs ad-hoc duties as assigned by the manager

Requirement

1 Diploma in mechanical engineering, electrical engineering or a related field

2 Excellent hands-on skills in mechanical assembly, soldering, crimping, etc

3 Knows how to handle electrical tools like crimpers, wire strippers, ferrules, etc.

4 Must be good in handling mechanical tools such as drills, taps,

5 Basic knowledge of Linux commands will be a bonus

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Build and maintain relationships with relevant stakeholders in assigned countries, increasing the team's understanding of the business' operations and internal control plans
• Conduct audits of the company's financial, operational, and information systems, including social compliance audit to ensure compliance with established codes, policies and procedures
• Plan and evaluate the effectiveness and adequacy of internal controls, policies, and procedures
• Identify, analyse any potential areas of risk, control gaps, and develop a risk mitigation plan and control gap remediation recommendations to the business
• Prepare and present audit reports to the management and headquarters
• Conduct presentations and training to increase awareness of governance frameworks
• Implement new audit initiatives to maintain, develop and improve internal control, risk management and governance frameworks
• Assist with the development of policies and procedures to ensure compliance with industry standards and regulations
• Any other adhoc projects assigned

Job Requirement

• Bachelor's degree in Accounting, Finance, or relevant fields and qualifications in ACCA/CPA/CIA/CISA/CFE/CCEP
• At least 4 years of experience in internal auditing, risk management
• Have had commercial and/or Big 4 internal audit experience
• Experience in the manufacturing industry would be beneficial
• Knowledge of legal and compliance will be added advantage
• Proficient in Excel, PowerPoint, or MS Office, experienced in data analytics
• Displays qualities of a proactive and team-oriented individual
• Excellent communicator with strong presentation and influencing skills
• Willingness to travel internationally
• Knowledge of ESG (Environmental, Social and Governance) strategy and corporate sustainability is advantageous.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Key Responsibilities:

• Provide daily general cleaning & housekeeping services for office area which include working areas, washroom, pantry areas, meeting rooms and common areas (i.e. walkways, staircases, landscape areas).
• Assist in preparing and serving of light snacks, fruits and drinks/beverages to visitors/guests whenever required.
• Keep the office pantry area clean & tidy and maintaining the general cleanliness of kitchen appliances and cleaning equipment in a safe and efficient manner.
• Refilling and restocking of cleaning supplies and toiletries (hand wash, toilet paper, paper towels etc) and pantry supplies (biscuits, beverages etc).
• Maintaining cleaning products and pantry supplies and update HR & Admin department to order new supplies when necessary.
• Daily clearing of waste bins and dispose all the rubbish from office to designated areas.
• Watering and maintenance of plants.
• Any other general cleaning duties and ad hoc duties as assigned.

Key Requirements

• Prior office housekeeping/cleaning experience is advantageous.
• Good communication and interpersonal skills.
• Able to multi-task and work independently.
• Positive attitude, committed, hardworking and responsible.
• Suitable for mature workers who are staying in Jurong West vicinity.
• Able to start immediately or at a short notice.
• Working Hour: Monday to Friday, 830am to 6pm (inclusive of one hour lunch break).

Interested applicants can WhatsApp or Call +65 9684 1509

1. Assist Senior Site Supervisor and Site Manager in ensuring all construction works involving utilities engineering, laying of power cable, auxiliary cable installation are carried out to meet principal/clients requirement and are in compliance with all government regulations and procedures.
2. Assist Senior Site Supervisor and Site Manager to plan, organize and oversee all construction activities at all phases of the construction including coordinating and mobilization of workforce, equipment and materials necessary for project.
3. Constantly monitor the work progress by conducting regular checks on job sites to ensure works are carried out in accordance with approved plans, company’s quality standard, customers/ requirements and all relevant government and industry code of practices/standards.
4. Supervise and carry out construction work assigned including trenching, pipe laying, cable pulling, cable termination, cable jointing, back filling and temporary road reinstatement.
5. Chart out the daily work plan including placement of road signs, temporary traffic control and coordinate with the logistic and procurement department or order of materials and equipment needed for the job.
6. Supervise, monitor and control project to ensure compliance with specification and drawing.
7. Ensure work site safety, cleanliness of work site, worker safety, health and welfare at all times.
8. Take prompt and decisive actions in all site emergencies/mishaps or incidents and keep superior posted of follow-up actions.
9. Take all necessary precaution actions in all site emergencies/mishaps or incidents and keep superior posted of follow-up actions.
10. Take all necessary precaution to prevent damages to private or public properties especially all underground services.
11. Carry out any other duties/works instructed or assigned by superior.
12. Ensure CCTV function all the time during working hour.

Job Description & Requirements

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description & Requirements
Roles & ResponsibilitiesJob Requirement & Description:· Possesses Class 3 or class 4 Driving License. Min 2 years’ experience preferred· Possesses at least more than 2 years of driving experience are also welcome to apply· Have experience in driving 10ft/ 20ft lorry/ Prime Mover· Ability to commit to 6 days work week & willing to work overtime· Daily delivery service & handle daily routes and millruns· Ensuring proper endorsements and documentations is completed· Salary commensurate with driving experience and shift flexibility· Familiarity with handling temperature-controlled life science products or Air products· Familiar with Singapore Roads· Ability to read, write, communicate and understand English· Good natured/ positive· Adhoc collection/ deliveries

2. SKILLS

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• MNC, 5 days, Tuas, Transport
• $4000 - $4500 basic, allowances,overtime claim
• Frequent travelling
• Candidates with no experience can apply
• Mentorship will be provided

Summary:

Our client is seeking for a motivated and technically skilled Junior Service Engineer to join their team. Candidates with relevant qualifications but no experience can apply. In this role, you will support senior engineers and handle service orders from their Service & Commissioning Manager and Coordinator. You will be responsible for evaluating, troubleshooting, repairing, and ensuring the safe return of equipment to service. This position offers hands-on experience and opportunities for learning and growth in a dynamic environment.

Job scope:

• Assistant Senior/Service & Commissioning Engineer on-site
• Execute service orders and assignments as directed by the Service & Commissioning Manager or Coordinator.
• Serve as the field representative to assess, troubleshooting, analyze, repair, test and return equipment to service based on instructions from service orders.
• Create daily reports on completed service tasks, issues encountered, and resolutions, sending them to the service mailbox.
• Complete all required documentation and submit reports related to service tasks.
• Ensure that all services are conducts in a safe and effective manner, adhering to company and industry standards.

Requirements:

• Minimum a Degree in Electrical, Electronics, Computer Science or related field.
• Candidates with no experience can apply as training and mentorship will be provided to develop technical skills and industry knowledge.
• Strong foundational knowldge of electrical, hydraulic, and mechanical engineering fundamentals.
• Analytical and systematic problem solving.
• Basic knowledge of programming and industrial control systems is a plus.
• Willing to travel abroad frequently for assignments.
• Able to work overtime when neccessary

Interested applicants, please send your resume to [email protected]

Reporting to Manager, Laboratory, this position has to take up the following responsibilities in the manufacturing of Alpha-Olefin Copolymers, namely TAFMER™ & EPR products in the plant.

Responsibilities

• Plan daily analysis for laboratory technicians
• Ensure daily planned work are executed.
• Ensure testing are performed in accordance to approved Laboratory SOPs
• Ensure that calibration and preventive maintenance for all Laboratory equipment are scheduled and duly conducted with timelines
• Ensure that all Laboratory equipment are well-maintained
• Perform laboratory inventory control. Ensure lab consumables and spare parts are available.
• Ensure and upkeep good Laboratory safety practices and housekeeping
• Provide laboratory SOPs training to new staff.
• Conduct shipment and in-process training and qualification in accordance to approved Laboratory SOPs
• Provide testing support and undertake other assignments during lab projects, production trial and other ad-hoc activities in the plant
• Provide support to other duties as and when directed by immediate superior

Requirements

• Bachelor’s Degree in Chemistry or related discipline. Fresh graduate may apply.
• Alternative, Diploma in Chemistry, Chemical Engineering or a related discipline with at least 5 years of relevant experience
• Knowledge in polymer science and familiarity with ISO9001:2015 and ISO14001:2015 are preferred
• Self-motivated, independent and resourceful
• Possess good communication skills and presentation skills
• Proficient in Microsoft Office applications
• Able to perform overtime work when required
• Willing to work in Jurong Island

• MNC, 5 days, Jurong East (near MRT)
• Basic salary: $5500 - $6000
• Entitlement to staff benefits
• 6 months contract (Start in Jan 25)
• Hands-on experience in using IFS system

Job responsibilities:

• Ensuring year end balances are rolled over correctly into new IFS system
• Handling the Accounts payable flow, which includes resolving issues, uploading invoices, coding,generating posting proposals,running payments, and managing daily bank files and tax codes.
• Managing journal entries for transactions not covered in the IFS modules (e.g.payroll, external file uploads, prepayment amortization) .
• Working with the fixed asset module to handle asset acqusition, importing fixed asset objects,running depreciation and ensuring depreciation is accurate.
• Performing reconciliations such as GRNI (Goods received not invoiced),mixed payment postings and bank reconciliations.
• Generating and creating reports required for period closing, including GST/VAT reports,trial balance, GL listings and AP/AR reports.

Requirements:

• Minimum a Diploma/Degree in Finance & Accounting
• At least 5 years of relevant experience
• Must have experience in using IFS system
• Willingness to commit to a 6-month contract
• Responsible, meticulous and independent

Interested applicants, please send your resume to [email protected]

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variation claims at regular intervals of the project.
• Able to read drawings and take out the quantity , prepare tender
• Maintaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.
• Able to draft letter to client or contractor for contractual issues

Job Responsibilities

• Possess a Civil Engineering Degree or equivalent
• Able to do Tender
• Proficient in using AutoCAD
• Familiar with sketchup and able to make 3D proposal for projects
• Preferably with 2 years of relevant working experience

We are looking for a dedicated and highly organized Secretary to provide comprehensive secretarial support for the Directors/HODs.

Core Responsibilities

• Provide administrative / secretarial support to the HODs and Directors - travel arrangements, calendars, appointment scheduling and drafting of correspondences, etc.
• Ensure meetings are effectively organized and record minutes of meeting.
• Handle and draft correspondences to business associates.
• Research, prepare and handle confidential-related matters.
• Maintain efficient filing system of internal, external and confidential documents.

Requirements

• Minimum Diploma in Secretarial Studies or related discipline.
• At least 5 years experience in similar capacity.
• Prior experience in F&B / Hospitality industry would be advantageous.
• Possess a “can-do attitude” and eager to learn.
• A gastronomist who enjoys different cuisines.
• A high degree of resilience, perseverance, focus and commitment is essential.
• Excellent written and verbal communication skills.
• Independent, meticulous and maintain high level of professionalism.
• Must be efficient and confident to work in fast paced environment.
• Positive work attitude, team player, good interpersonal skills and ability to multi-task.
• Mature, responsible and hard working with pleasant personality.
• Organised, confident, self-motivated, resourceful and able to work under minimum supervision.
• Resides in the West area preferred.