Responsibilities

• Perform circuit troubleshooting and general failure analysis
• Perform installation, maintenance, repair, and replacement of all electrical jobs
• To execute work plan and ensure job compliance to quality standards
• Ensure compliance with safety regulations
• Able to understand job requirements and execute tasks given by team leader
• Attend to ad hoc job required for train, bus, and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience
• Able to perform assigned tasks physically, independently, or through team activities.
• Self-motivated, highly resourceful, and organized
• Self-disciplined to carry out tasks responsibly
• Work cooperatively in a team with other technicians to complete assigned tasks
• Have a positive and pleasant attitude.

.Job Highlights

• Immediate Hiring
• Free staff meals
• In-house gym facility
• Short walking distance from Tuas Link MRT

Working Hours

• 44 hours, 5 Days per week

Job duties and responsibilities:

• Monitor and inspect production areas according to ISO 22000 and customer requirements, feedback to relevant departments on any rectification required.
• Maintain and update documentation, records for ISO 22000 and act as a Food Safety Team Member.
• Perform outgoing goods inspection.
• Conduct physical, microbiological analysis for finished food products and environmental monitoring of facility and personnel.
• Work with R&D chef for shelf-life testing and conduct trend analysis when required.
• Coordinate with third-party laboratory on sample submission where required.
• Highlight any abnormalities detected during analysis, review and investigate as required.
• Prepare Certificate of Analysis where required.
• Upkeep of laboratory consumables and cleanliness.
• Responsible for verification of cleaning chemical concentration.
• Conduct customer complaint investigation and prepare corrective action report where required.
• Coordinate and provide support in all internal, external, and regulatory audits.
• Act as Qualified Personnel (QP) for food export processes and liaise with relevant regulatory authorities (e.g. SFA, HPB).
• Perform assigned tasks and work to achieve company goals and department objectives.
• Any ad-hoc duties as assigned by the management.

Job Requirements:

• Degree / Diploma in Food Science, Food Technology, Food Microbiology or similar discipline.
• Minimum 2 years of experience in a Quality Assurance role / Microbiological Laboratory preferably from the food industry.
• Knowledge in ISO 22000 Food Management System, GMP, GLP and ICP.
• Positive working attitude, analytical, willingness to learn, team player, initiative and effective interpersonal skills.
• Multilingual will have an added advantage.
• Proficient with Microsoft Office.

Responsibilities

• Attend to daily operations team, such as installation, maintenance, replacement fabrication and repairs.
• To execute work plan and ensure job compliance to quality standards.
• Supervise and oversee the mechanical team to ahieve best operational efficiency
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

Metalcool is a leader in precision engineering, dedicated to delivering innovative solutions to our valued clients. We are seeking a skilled CNC Tool Manufacturing Technician to join our team. If you are a detail-oriented individual with expertise in CNC tool grinding and a commitment to quality, we want to hear from you!

Key Responsibilities:

As a CNC Tool Manufacturing Technician, you will play a crucial role in fabricating precision metal cutting tools. Your responsibilities will include:

• CNC Tool Grinding: Operate a 5-axes CNC tool grinding machine to fabricate metal cutting tools according to job sheet requirements.
• Blueprint Interpretation: Interpret basic drawings and specifications to determine dimensions, tolerances, sequence of operations, and setup requirements.
• Quality Control: Use measuring equipment, gauges, and fixtures for accurate inspection checks to ensure the quality of tools.
• Production Records: Maintain up-to-date production records and reports, accurately documenting work performed.
• Machine Maintenance: Perform daily cleaning and light maintenance tasks on machinery and equipment to ensure optimal performance.
• Communication: Update the Production Supervisor on job status and report any non-conformance issues raised during the fabrication process.
• Compliance: Adhere to ISO requirements and safety regulations to ensure a safe and compliant working environment.
• Equipment and Work Area Maintenance: Take responsibility for keeping equipment and the work area clean and perform basic preventative maintenance functions on equipment.

Qualifications:

To excel in this role, you should possess the following qualifications:

• Proven experience in operating a 5-axes CNC tool grinding machine.
• Proficiency in interpreting technical drawings and specifications.
• Knowledge of measuring equipment, gauges, and quality control processes.
• Strong attention to detail and commitment to producing high-quality tools.
• Ability to perform basic machinery maintenance and cleaning tasks.
• Effective communication skills and a team-oriented approach.

Why Join Metalcool?

• Competitive salary and benefits package.
• Opportunity to be part of a skilled team in a dynamic and growing industry.
• Commitment to safety, quality, and compliance with industry regulations.
• Supportive and inclusive work environment that encourages professional development and growth.

If you are a detail-oriented and skilled CNC Tool Manufacturing Technician with a passion for precision engineering, we invite you to submit your application. Please include your resume and a cover letter outlining your qualifications and why you believe you would excel in this role.

We are looking for a motivated and detail-oriented M&E Coordinator to join our team and contribute to the successful execution and management of our mechanical and electrical projects.

Key Responsibilities:

• Assist with the preparation and review of mechanical and electrical project documentation, including specifications and drawings.
• Help track project progress, ensuring that M&E work is completed on schedule and within the allocated budget.
• Coordinate with contractors and suppliers to obtain quotes and manage the delivery of materials.
• Review and verify M&E costs, assisting in budget monitoring and management.
• Maintain records of project changes, issues, and resolutions.
• Support site inspections to ensure M&E installations meet project specifications and standards.
• Provide administrative support and generate reports as required.

Qualifications:

• Degree or diploma in Mechanical Engineering, Electrical Engineering, or a related field.
• Basic knowledge of mechanical and electrical systems and construction practices.
• Some experience in a similar role or relevant internship is preferred but not essential.
• Strong organizational and communication skills.
• Ability to work independently and collaboratively.
• Proficiency in MS Office Suite (Word, Excel, Outlook).

JOB DESCRIPTION:

• On site pre delivery inspection (PDI)
• Bus door breakdown service support
• Inhouse transit parts preparation
• Assist to arrange parts delivery
• Assist to monitor and forecast parts

JOB REQUIREMENTS:

• Nitec/Higher Nitec in Mechanical/Electrical
• Minimum 1 year experience in an automotive industry
• Willing to station on-site

Responsibilities

- Trouble Shooting Of Inverters, PLC & UPS System

- Execute Overhaul & Repair Works

- Installation & Commissioning Duties

- Willing to perform hands on work & travel overseas

- Have logical analysis skill and able to work independently with minimum supervision

Requirements

- Only Singaporean need to apply

- GCE 0 Level, Nitec, High Nitec or ITE

- 'Added advantage if with Mechatronics, Electrical & Electrical Knowledge

- Good working attitude and able to exercise initiative

- Able to travel overseas with short notice and work irregular hours - Must be a team player with good interpersonal skill

JOB SUMMARY

Reporting to the Team Leader, this position is responsible for the efficient operation, maintenance and repair of the physical structure, utility services, equipment, fixtures, and furnishings of the hotel facilities.

MAIN RESPONSIBILITIES

• Carry out planned and unplanned maintenance programs for the various systems such as (not limited to) the following :

- Air-conditioning & electrical, refrigeration, FLS equipment, building maintenance including furniture & fixtures, painting, parts renewal & repairs, kitchen and laundry equipment, low voltage (LV), guest rooms, F&B outlets, function/banquet areas, front/back of the house, plumbing & drainage

• Communicate with engineering management and team leader with regards to possible improvements to increase efficiency
• Co-ordinate and inform engineering management and team leader of any disruptions to service of any kind
• Implement safe work practices, efficient methods, proper preventative maintenance and repair
• Develop skills through training and hands on experience
• Comply with hotel and department policies and procedures at all times
• Be fully conversant with hotel fire & life safety/emergency procedures
• Attend all briefings, meetings and trainings as assigned by management
• Maintain a high standard of personal appearance and hygiene at all times
• Perform other reasonable duties assigned by the Management of the Hotel

REQUIREMENTS

• Preference will be given to those with Trade Certificate
• Minimum 1 year of relevant hands on experience in area of expertise
• Good reading and oral proficiency in English language

ADDITIONAL INFORMATION

• 5 days work week
• Duty meal provided
• Transport from Harbourfront train station
• Comprehensive medical and dental benefits

TECHNICIAN X 2 (WORK IN SG)

⌚Working hours: Monday to Friday (9am to 6pm) + Saturday (9am to 2pm)

TECHNICIAN X 2 (WORK IN SG)

⌚Working hours: Monday to Friday (9am to 6pm) + Saturday (9am to 2pm)

Contract Sterilization Services Pte Ltd, wholly owned subsidiary of Serial System Ltd (a SGX mainboard listed Company), assembles and distributes medical devices. It offers a full range of standard and customised perfusion tubing packs. Marketed all over the Asia Pacific region, these products are the preferred choices of many leading hospitals.

We invite a suitably qualified candidate to fill the following position:

Maintenance Technician

Responsibilities:

• Responsible for M&E matters and facility maintenance
• Perform routine checks and troubleshooting of plant equipment
• Plan maintenance schedule for machines equipment, facilities and breakdown maintenance of the M&E Systems
• Discuss with contractor on machine matter or facility maintenance
• To highlight any follow-up actions from maintenance checklist
• Follow-up actions for yearly equipment and electrical licence application
• Respond to urgent/emergency situations
• Carry out scheduled weekly preventive maintenance and yearly equipment calibration
• Control chemical usage consumption and spare parts control
• Ensure good housekeeping at work areas

Requirements:

• NITEC or Higher Nitec in Mechanical/Electrical with at least three (3) years relevant experience
• Strong in problem solving/analysis
• Able to multi-task
• Able to work in cleanroom environment
• Able to work as a team player
• Possess positive work attitude with on-going learning mindset
• Proficiency in Computer literacy
• Understanding of welding knowledge will be an added advantage

Interested candidates are invited to submit their resumes and expected salary. (In keeping with PDPC’s guidelines, please do not include NRIC No in your resume. We reserve the right not to process any applications that do not adhere to these guidelines.)

We regret that only shortlisted candidates will be notified.

Company Address: 2 Tukang Innovation Grove, #08-05, MEDTECH HUB, Singapore 618305

Job Highlights

5-Day Work Week

On-the-Job Training

Great Hands-on learning and exposure

The Process Technician is responsible for the daily operation of the equipment and procedures for the Plant area to which he/she has been assigned. This includes responsibility for manipulation of equipment and controls to carry out procedures, and completion of in-process analytical for process decisions and verification, and housekeeping of the work area. In completion of his/her job tasks, the Process Technician is responsible for seven basic performance areas – Yield, Capacity, Safety/Health/and Environmental, Quality, Plant Condition, Skill Development and Other Costs.

Education:

- NITEC/Diploma in chemical technology or closely related field

Job Description

1. Evaluate Novacote R&D products (Laminating adhesives and coatings) for applications performance and develop applications of existing Novacote products.
2. Conduct application trials with customer materials and conduct Novacote product trials at customers’ place.
3. Analysis of customer samples for application performance.
4. Assist in QC for application of off-specs batches of Novacote products. Assist in QC of raw materials, tolled Novacote products as and when required. Ensure proper storage of QC retention samples of tolled products.
5. Provide trainings on Novacote products applications to customers, distributors and new staff.
6. Trouble shoot and carry out minor maintenance work of Novacote application laboratory equipment.
7. Ensure that all consumables are sufficient for daily operation of application lab.
8. Update and file analysis reports and other documents.
9. Carry out safety and house keeping activities in the Novacote application lab.
10. Any other duties as and when assigned by superior.

Minimum Job Requirement

1. Diploma or Nitec (ITE) in chemical Engineering or related field.
2. 2 years working experience in laminating adhesives, coatings, inks and / or printing & converting industry preferred.

Job Description

• Assist with daily laboratory tasks, including sample preparation (e.g., hazardous waste) and running analyses.

• Perform routine maintenance of lab equipment to ensure proper functionality.

• Assist with laboratory record-keeping, data entry, and reporting results.

• Maintain a safe and organized laboratory environment.

• Conduct regular chemical inventory checks.

• Manage laboratory waste according to safety protocols.

• Collaborate with other departments as needed.

• Ensure compliance with laboratory regulations and standards.

• Perform other ad-hoc duties as assigned.

• To hold safety responsible for the role and report any unsafe situation

Job Requirement

• Polytechnic/ Technical Diploma in Chemistry

• Excellent verbal and written communication skills.

• Ability to learn and adapt new technologies to stay relevant.

• Fresh graduates are welcome to apply.

• 1-2 years of knowledge of laboratory best practices

• Strong attention to detail.

• Computer skills: Proficiency in Microsoft Office

• Analytical and numerical skills: ability to perform basic math calculations, understand different measurement units, and use concepts like percentages and ratio

• Time management skills: able to prioritize and organize work to be more efficient.

• Willing to work in the Tuas area.

Job Description & Requirements

Roofing Service Technician handle roof construction and maintenance and make sure this part of a building stays structurally sound. Typical activities listed on a Roofing Laborer's resume example are inspecting roofs, detecting problems, choosing materials for repairs, applying insulation, and replacing shingles.

Need to carry out a variety of duties depending on the organization they work for. Based on job listings we analyzed, these duties typically involve:

Inspect Roof Damage

Roofing Service technicians need to inspect roofs to check for any damage to the shingles, tiles, or waterproofing, and identify areas where repairs need to be made.

Estimate Costs

Estimate the labor and material costs for each job and determine whether additional weatherproofing or insulation will be required.

Install Insulation

To make the structure more energy efficient, roofing laborers install insulation or vapor barriers and cut materials to fit the corners and walls so that everything is sealed and leak-proof.

Choose the Right Materials

We need to ensure that the correct materials are used for the job, from wood and slate to asphalt and steel.

Keep the Construction Area Tidy

To meet health and safety regulations, roofing Service Technicians ensure that the construction and work areas are kept clean and tidy, and that any dangerous materials or tools are kept out of walkways to prevent accidents

• Teamwork – Need to work effectively and professionally with other members of the construction team. They must maintain a professional demeanor when working with colleagues and assist when it’s needed
• Math skills – whether making measurements or calculating the quantity of materials needed, must need math skills to carry out their job correctly.

ALL RACES WELCOME

Your Job

We are seeking for a Reliability Lab Technician to support testing efforts from Molex Singapore and other entities in a laboratory environment.

Our Team

You will be working closely under the supervision of the Specialist, Lab. The team collaborates to ensure high-quality testing support and maintains a safety-conscious work environment.

What You Will Do

• Conduct Reliability tests on the products or evaluation.
• Ensure that all tests are conducted as per test requirements and accurately, include Robustness Tests in all new projects submitted for tests.
• Maintain the standard as well as meeting the requirements of ISO17025.
• Generate test reports and to ensure databases are updated and reports are filed properly.
• Keep all tested samples in good order per sample retention policy.
• Conduct monthly Product Audit tests.
• Ensure that the test fixtures are kept and managed properly.
• To ensure good general housekeeping of the reliability lab.
• Performs other related duties as assigned by management.

Who You Are (Basic Qualifications)

• ITE or equivalent in Electrical or Mechanical field.
• At least 2 years of work experience in a test laboratory environment.
• Safety conscious and attentive to detail.

What Will Put You Ahead

• Experience in QA Lab and Reliability Lab environments.
• Skills in cross-sectioning.
• Ability to operate temperature and humidity chambers.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description:

1. Perform daily and routine inspections - document observations, ensure all parameters and standards are met and alert the Manager for any defects, deviations and deficiencies immediately (pre-production / in-process / wet cleaning / glass, brittle plastics and ceramics / environment / packaging materials / raw materials / finished product / chemicals / pests / water / coat and uniform).

2. Report defects, abnormality, or other quality concerns.

3. Perform post-cleaning inspection and swab testing.

4. Perform line clearance before start of production.

5. Perform personal hygiene swab testing, air quality sampling, water sampling and environmental swab testing and ad-hoc swab sampling.

6. Conduct incoming packaging material inspection.

7. Conduct incoming raw material inspection.

8. Monitor pest control monitoring and infestation.

9. Pack and manage retention samples.

10. Able to commit on alternate sat from 8am to 12 noon.

Job Requirements:

1. Minimum high school education or equivalent.

2. Attention to detail (be very alert to detect little discrepancies in products and procedures to fulfil specific criteria)

3. Able to communicate with English and Mandarin speaking co-workers

4. Competencies to instruct operators on how to avoid similar problems in the future when an issue is detected.

5. Able to explain findings clearly, honestly and report findings and suggestions for improving.

6. Able to work in a factory and production environment.

7. Able to stand and walk around for lengthy amounts of time.

Job Descriptions:

1. Perform daily and routine inspections - document observations, ensure all parameters and standards are met and alert the Manager for any defects, deviations and deficiencies immediately (pre-production / in-process / wet cleaning / glass, brittle plastics and ceramics / environment / packaging materials / raw materials / finished product / chemicals / pests / water / coat and uniform).

2. Report defects, abnormality, or other quality concerns.

3. Perform post-cleaning inspection and swab testing.

4. Perform line clearance before start of production.

5. Perform personal hygiene swab testing, air quality sampling, water sampling and environmental swab testing and ad-hoc swab sampling.

6. Conduct incoming packaging material inspection.

7. Conduct incoming raw material inspection.

8. Monitor pest control monitoring and infestation.

9. Pack and manage retention samples.

10. Able to commit on alternate sat from 8am to 12 noon.

Job Requirements:

1. Minimum high school education or equivalent.

2. Attention to detail (be very alert to detect little discrepancies in products and procedures to fulfil specific criteria)

3. Able to communicate with English and Mandarin speaking co-workers

4. Competencies to instruct operators on how to avoid similar problems in the future when an issue is detected.

5. Able to explain findings clearly, honestly and report findings and suggestions for improving.

6. Able to work in a factory and production environment.

7. Able to stand and walk around for lengthy amounts of time.

What You Will Do

• Wiring and Installation: Assist Control Engineers in wiring and installation of control systems, including PLCs, HMIs, sensors, and actuators.
• System Debugging: Support the debugging of control systems to identify and resolve issues, ensuring optimal PLC programming.
• System Testing: Conduct testing of control systems to verify functionality, accuracy, and reliability, as per engineering specifications.
• Data Collection and Analysis: Collect and log data from control systems for analysis, assisting Control Engineers in identifying trends and potential areas of improvement.
• Routine Maintenance: Perform routine maintenance and updates on control systems to ensure smooth and continuous operation.
• Troubleshooting: Diagnose and troubleshoot issues within control systems, providing timely solutions to minimize downtime.
• Documentation: Assist in creating detailed documentation of wiring diagrams, system configurations, test results, maintenance activities, and troubleshooting steps.
• Safety Compliance: Ensure all activities comply with company policies, safety regulations, and industry standards.
• Field Wiring: Perform electrical field wiring of control system components, ensuring clean and organized wiring harnesses.
• Support in System Upgrades: Assist in the implementation of system upgrades and modifications, working closely with Control Engineers.
• Training Support: Help in training production operators and new technicians on the operation and maintenance of control systems.
• Continuous Improvement: Participate in continuous improvement initiatives to enhance system performance and efficiency.
• Additional Duties: Perform other related duties as assigned by management.

International Travel: Be willing to travel internationally up to 20% per year, if required.

Who You Are (Basic Qualifications)

• ITE or equivalent in Electrical or Mechanical field.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description

· To be able read Electrical/Instrumentation Drawings

· Experience in Electrical wiring troubleshooting

· Has Knowledge in Instrumentation & Motor Control

Job Requirement

· ITE in Electrical

· Able to write Service Report

· Able to follow the safety procedure

· Computer Literate

· Can work independently

· Willing to work overseas & accept offshore/onboard assignment

Job Benefits

· AWS

· Excellent learning environment

· Training Provided

· Onboard Allowances

· Group Personal Insurance/ Group Personal Accident Insurance

· Annual leaves starting with 14 days and up to 21 days

Responsibilities:

• Perform assembly builds
• Ensure assembly builds are completed as scheduled and according to required specifications, drawings and work instruction.
• Work with engineers to conduct experiments
• Report manufacturing problems and assist in problem-solving and troubleshooting.
• Perform housekeeping and comply with manufacturing discipline and cleanroom protocol.
• Other ad-hoc duties

Requirements:

• Min NITEC/ Higher Nitec or Diploma in Engineering or its equivalent
• Able to comprehend schematic / mechanical drawing
• Able to commit rotating shifts

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Job Description

· To be able read Hydraulic Circuit Drawings

· Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

· Experience working in any Marine Vessel /Ships

· Has Knowledge in Instrumentation & Motor Control

Job Requirement

· ITE in Mechanical

· Able to write Service Report

· Able to follow the safety procedure

· Computer Literate

· Can work independently

· Willing to work overseas & accept offshore/onboard assignment

Job Benefits

· AWS

· Excellent learning environment

· Training Provided

· Onboard Allowances

· Group Personal Insurance/ Group Personal Accident Insurance

· Annual leaves starting with 14 days and up to 21 days

Roles & Responsibilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

Your Job

Responsible for providing measurement and data analysis services to support AQP activities throughout the product development phase and maintaining the equipment and proper housing keeping of the measurement lab.

Our Team

You will be reporting to Principal Engineer, Metrology

What You Will Do

• Conduct inspection, measurement, data analysis, and prepare report for NPI project.
• Develop measurement program, inspection gauges and fixtures.
• Perform Measurement System Analysis, Capability Studies & any necessary statistical analysis.
• Update quality documentation (e.g., Inspection checklist, control plan, SII/SOP).
• To extract historical quality notification (QN) and lesson learnt for new product launch and design review.
• Check Engineering drawings for errors.
• Other duties as assigned by Management.

Who You Are (Basic Qualifications)

• NITEC in Engineering or related fields.
• Fresh graduates are welcome
• Able to work independently and self-organized.
• Good knowledge & understanding of metrology tool and GD&T.
• Strong problem-solving skill.
• Proficiency in Microsoft office.

What Will Put You Ahead

• NITEC in Mechanical Engineering.
• 3 years of experience working in new-product introduction or lab environment.
• Experience with operation of vision measurement system.
• Familiar with 3D CAD software and engineering drawing.
• Experience using Minitab or other statistic software.

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

.Job Highlights

• Immediate Hiring
• Free staff meals
• In-house gym facility
• Short walking distance from Tuas Link MRT

Working Hours

• 44 hours, 5 Days per week

Job duties and responsibilities:

• Monitor and inspect production areas according to ISO 22000 and customer requirements, feedback to relevant departments on any rectification required.
• Maintain and update documentation, records for ISO 22000 and act as a Food Safety Team Member.
• Perform outgoing goods inspection.
• Conduct physical, microbiological analysis for finished food products and environmental monitoring of facility and personnel.
• Work with R&D chef for shelf-life testing and conduct trend analysis when required.
• Coordinate with third-party laboratory on sample submission where required.
• Highlight any abnormalities detected during analysis, review and investigate as required.
• Prepare Certificate of Analysis where required.
• Upkeep of laboratory consumables and cleanliness.
• Responsible for verification of cleaning chemical concentration.
• Conduct customer complaint investigation and prepare corrective action report where required.
• Coordinate and provide support in all internal, external, and regulatory audits.
• Act as Qualified Personnel (QP) for food export processes and liaise with relevant regulatory authorities (e.g. SFA, HPB).
• Perform assigned tasks and work to achieve company goals and department objectives.
• Any ad-hoc duties as assigned by the management.

Job Requirements:

• Degree / Diploma in Food Science, Food Technology, Food Microbiology or similar discipline.
• Minimum 2 years of experience in a Quality Assurance role / Microbiological Laboratory preferably from the food industry.
• Knowledge in ISO 22000 Food Management System, GMP, GLP and ICP.
• Positive working attitude, analytical, willingness to learn, team player, initiative and effective interpersonal skills.
• Multilingual will have an added advantage.
• Proficient with Microsoft Office.