Responsibilities:

1. Involve in manufactory processes

• Supervise process flow control
• Supervise machine/equipment setting control
• Quality Control in between processes
• Monitor issues and matters on manpower

2. Provide positive suggestions on improvement on process

3. Suggest machines/equipment alteration for better control and preventive maintenance programme

4. Ensure strict GMP control and guidelines

5. Any other assignment by Management

Requirement:

· Diploma in Pharmaceutical Technology

Responsibilities

• Perform circuit troubleshooting and general failure analysis.
• Perform installation, maintenance, repair and replacement of all electrical jobs.
• To execute work plan and ensure job compliance to quality standards.
• Ensure compliance with safety regulations.
• Able to understand job requirement and execute task given by team leader.
• Attend to ad hoc job required for train, bus and vehicle on site.

Requirements

• Minimum Professional Certifications, NITEC and/ or Diploma holder with relevant experience.
• Able to perform assigned tasks physically, independently or through team activities.
• Self-motivated, highly resourceful and organized.
• Self-disciplined to carry out tasks responsibly.
• Work co-operatively in a team with other technicians to complete assigned tasks.
• Have positive and pleasant attitude.

• Perform all mechanical or electrical installation tasks in support of new and existing machinery working from engineering drawings or schematics, with minimum supervision. This will include equipment such as a generator, transformer, load bank or temperature control equipment.
• Troubleshoot machinery failure or breakdown (mechanical and electrical) and to perform remedial action while referring to equipment manuals or electrical schematics with minimum supervision. This will include equipment such as a generator, transformer, load bank or temperature control equipment.
• Strip down and report the condition of a wide range of equipment as stated earlier. To advise on spare parts and to rebuild to a high standard.
• Assemble and operate all equipment which includes the generator, transformer, load bank, temperature control equipment and other equipment.
• Be able and ready to travel for on / off-shore jobs on a short notice and to be able to respond to any emergency breakdown calls after office hours.
• Be able to use a variety of analog and digital measurement equipment for electrical and mechanical parameter measurements.
• Liaise with internal / external customers of work in progress including feedback of possible delays or conflict of priorities
• Maintain work area in a clean and safe manner at all times to prevent any incidents/accidents.
• All work should meet suitable standards of craftsmanship, standard codes and specifications, established Company practices, and within assigned guide lines, ensuring that the technical, scope, budget, quality, delivery dateline, health and safety and environmental objectives are achieved

Purpose of the Position

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• To manage Linde Gas Singapore operations to ensure it is maintained safe, reliable, and efficient.
• The operations are to achieve key performance indicators (KPI’s) and annual plan objectives.

Responsiblities

• Accountable for compliance with safety, health, environmental, quality and relevant industry standards.
• Accountable for safe, efficient, and reliable operation of assets
• Accountable for investigating and trouble shooting process issues and outages
• Support process improvement, productivity and reliability projects
• Accountable for the planning, supervision, and execution of operation activities
• Accountable for compliance to all Procedures, Routines, Logs and other Operational Processes
• Accountable for meeting contractual and supply commitments
• Accountable for planning and executing TAR operational activities
• Accountable for controllable site costs
• Accountable for timely and accurate data reporting

Requirements

• ITE in Chemical Process technology /Diploma in Chemical Engineering or related discipline
• Min. 1 to 2 years Operational experience with demonstrable exposure to process plant operations and site-based activity or equivalent.

• Assemble and install mechanical systems for industrial, electromedical, and manufacturing purposes Implement cost-effective changes in equipment design to improve reliability and safety
• Assist mechanical engineers in developing, building and maintaining machines and tools
• Read and interpret engineering designs, plans, and diagrams for piping, transmission, and HVAC systems Prepare cost and material estimates for a project
• Test and analyze machines, tools, and components to determine their performance, strength and response to stress
• Design manufacturing implements such as jigs, dies, and moulds
• Carry out inspections to identify faults and initiate repair of mechanical systems or products
• Monitor mechanical processes to ensure conformance to standard project procedures Use
• CAD software and technology to prepare drawing plans and design for an engineering project
• Assemble components or machine parts to form integral or complete product unit
• Provide technical solutions to mechanical problems found in a variety of industries
• Develop and design prototypes of equipment
• Ensure compliance with health/safety procedures and regulations
• Implement quality control systems useful in evaluating and testing mechanical processes/product for consistency.

Requirements

• Degree in Engineering discipline
• Working Location : Jurong West
• Working days : Monday - Friday (7:30 am - 5:15pm)
• : Saturday (7:30am - 1pm)

Looking for an Structural Engineering Technician with the following experience :

1. Minimum 12 years of Shipyard experience

2. Minimum 7 years experience in Singapore Shipyard

3. Minimum 5 years experience in other country Shipyard

4. Having Singapore SSSC Certificate

5. Having Marine Rigger & Signal Man Certificate

6. Should posses Singapore SMAW 3G, 4G & 6G Certificates in Welding

7. Should posses Singapore FCAW, 3G & 4G in Welding

8. Knowledge of Seatrium Shipyard Procedures

9. Proven knowledge of MOM Safety Regulations

10. Experience in PTW system in a Shipyard environment

11. Knowledge of English & Bangla is a must

12. Experience in preparing Quotation for Structural Repair Ships & FPSO and LNG vessels

13. Ready to work beyond office hours with Multi-task capability

14. Should manage HULL section in FPSO and other Vessels

15. Should posses Singapore Class 3 Driving Licence

16. Should posses Leadership Quality to train & Promote other workers

17. Should posses communication skills to manage Shipyard Bosses and their Clients

18. Committed for Quality & Safety Excellance and capable of taking appropriate decision in critical situation

Under strict supervision, conducts tests on materials, components, subassemblies, and tools. Acquire basic knowledge of test procedures and techniques. Documents test procedures, data, observations, and results. Assemble components for prototype tools and for tests. Acquire basic knowledge of assembly tools and techniques. Documents assembly procedures and techniques. Learns and applies company sanctioned standards and specifications. Acquire basic knowledge of materials, components, and their application. Incorporate Reliability, HSE and Quality analysis techniques in all job processes. Error is readily ascertainable by the supervisor and can be corrected in relatively short time frames. Entry level position, no experience required.

Reporting to Shift Supervisor, this position will execute and maintain manufacturing process operations by physically performing the task of process control, equipment monitoring and in-process analysis to ensure the production process strictly follows company safety standards and environmental regulations and product quality is within customer's requirement.

Responsibilities:

• Support Shift Supervisor in handling plant start-up, shutdown manufacturing process according to established procedures
• Support production activities such as in-process quality testing, catalyst preparation, equipment preparation for maintenance, loading & unloading of process solvents
• Perform all routine task required to maintain manufacturing process such as monitor process parameters, plant patrolling, data logging and housekeeping
• Perform safe work practices through following safety regulations and supporting safety programs
• Ensure safe working conditions through taking corrective actions to maintain equipment and process condition within safe operating limits
• Perform company emergency response in areas of firefighting, rescue and loss containment
• Maintain plant safety equipment through routine checks
• Execute predictive maintenance to identify and prepare equipment for maintenance before breakdown
• Prepare or update standard operating procedures based on acquired experience and new technical know-how

Requirements:

• Diploma in Chemical Engineering or Chemical and Pharmaceutical Technology, NITEC in Chemical Process Technology or Higher NITEC in Chemical Technology or a related discipline with at least 4 years of relevant experience
• Class 2 Boiler Attendant certification is mandatory
• Entry level candidates without experience are welcome to apply
• Knowledge in Distributed Control System will be advantageous
• Effective team player with good communication skills and high self-motivation
• Able to perform rotating shift work
• Able to perform overtime work when required
• Willing to work in Jurong Island

Job Description:

• Carry out sampling and analysis of various types of samples (raw materials, in-process, final product, stability, Process cleaning and other samples assigned) and compilation of analytical data.
• Carry out testing of equipment cleaning and swab sample.
• Set up of new test method.
• Carry out method transfer.
• Support in analytical method validation.
• Support irregular work hour for IPC analyses.
• Operation, trouble-shoot and maintenance of analytical instruments.
• Preparation of customer and regulatory audit.
• Housekeeping of laboratory.

Requirements:

• NITEC/Diploma in Chemical related field
• Proficient with Microsoft Office (Words, Excel)
• Ability to work as a team in the department.
• Able to perform overtime when needed.
• Working experience in Good Manufacturing Practice (GMP) laboratory is preferred.

Job Duties

Process and Facility Related Works

• Supporting new machine builds, installation and modifications
• To maintain, monitor and troubleshoot existing machines
• Suggesting and implementing improvements to manufacturing processes, information and procedures
• Ensure Safety and Housekeeping standards are kept
• Any other Adhoc Duties

Job Requirements

Technical Skills

• Familiarity with robotic systems and automation technologies
• Experience in Debugging and Optimizing PLC programs
• Proficient in Troubleshooting Electrical and Mechanical Issues in Automated Systems
• Knowledge of Predictive Maintenance techniques to minimize downtime
• Proficiency in Microsoft Office and CAD

Personality

• Passion in mechanical automation technology
• Technically inclined
• Creative Problem Solver
• Logical Thinker
• Committed and Self-Disciplined

Communication

• Must be cooperative and willing to work in a team

Sample Preparation

· Receive and label all samples brought into the lab for accountability.

· Prepare samples from drying, crushing, splitting and pulverising.

· Mix fluxing reagents and load samples in furnace for the fire assay.

· Mix reagents for acid digestions.

· Perform fire assay techniques such as fluxing, fusing and cupellation of samples in correct numerical order.

· Perform smelting and sample extraction of precious metals as and when required

Setting up of Fire Assay Laboratory

· Assist with the set-up of laboratory, prepare the SOPs for Fire Assay techniques.

Measurement & Calibration

· Monitor analytical processes and take remedial action where deviations / discrepancies arise impacting on the quality of analytical results.

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab Manager

Perform Laboratory Data Analysis and Reporting

· Testing of precious metals scraps through cupellation method (fire assaying).

· Evaluate, validate, ensure and report technical accuracy of reporting analytical results

· Monitor analytical processes and take remedial actions where deviations / discrepancies arise impacting the quality of analytical results.

· Re-analyse analysis samples when control results are not within the acceptable range.

Quality Control

· Inspect samples, fusions, lead buttons and prills to ensure the assaying method is correct.

· Maintain records and accountability of materials (samples and standards) and equipment used.

Equipment Maintenance and Troubleshooting

· Report any apparatus or equipment which, to your knowledge, is not functioning correctly to the Lab manager

· Procurement and placement of all consumables, equipment and fixtures.

· Assist in the general / preventive maintenance of equipment and housekeeping of the laboratory.

· Maintain and record equipment faults.

· Troubleshooting of analysis methods.

Laboratory Housekeeping

· Ensure and maintain work areas and equipment are clean, tidy and organised.

Manpower Planning

· Assist with overtime planning in consultation with the Lab Manager.

· Assist with control and time keeping administration.

· Maintain productivity and turnaround time.

Compliance with Safety Protocols and Local Regulatory

· Assist with the application and maintenance of all necessary governmental licenses related to the laboratory. (Eg: DoE, DOSH, BOMBA, Poison Act etc.)

· Promote and implement workplace safety initiatives

· Ensure and maintain proper sample disposal of cupels, fire assay lead

wastes or water generated as a part of daily work performed in a safe manner and in compliance with the disposal regulations and requirements.

· React appropriately and immediately to emergency situations and assists other employees in maintaining readiness to respond to emergencies within the workplace.

Job Requirement

Educational & Professional Qualifications

· Minimum Diploma qualification in Chemistry or its related field.

Relevant Experience

· At least 3 years’ experience as a Fire Assayer.

· Demonstrated understanding of the analytical processes in Fire Assay and the analysis process.

· Problem solving skills.

· Have experience in selecting and setting up of equipment and processes to recover precious metals including gold, silver, platinum, palladium, rhodium is an advantage.

· Possess experience and the ability to operate ICP / XRF is an advantage.

· Must be willing to work overtime whenever necessary.

· Knowledge in safe handling of industrial chemicals.

· Possess effective verbal and written communication skills.

• Up to S$3.5K Base+AWS+gd perks!
• 3yrs electrical systems exp in building/facilities maintenance is req!
• 3 rotating shifts (no night shift)/5 days work week

Our Client is one of the leading hospitality clubs

Responsibilities:

• Performs daily start up, shutdown and inspection of building services and equipment according to the standards and requirements. Report defects and follow up to closure.
• Performs maintenance work related to electrical systems, plumbing, carpentry, masonry, and painting
• Schedules and completes a preventive maintenance program of Club buildings and grounds. To compile completed service report and maintain proper documentation.
• Assists the operations team with events set-up, pool float and clearing.
• Smooth and customer friendly day to day collaboration with both internal stakeholders and outsourced vendors to facility departments
• Undertakes In house improvement project lead & co-ordinate.
• Repairs and treats structures such as showers, sinks, appliances, doors/cabinets, walls and building exteriors
• Minor pool maintenance
• Takes daily / weekly utilities readings.
• Initiates and implement cost saving repair techniques and program to facilitate cost saving
• To maintain department working tools, materials (inventory) and machines for serviceability and accountability
• Authority compliances & licence renewal follow up
• Ensures that Club premises meets health and safety standards and legal requirements
• Carries out assessment of requirements for completion of reports, or work orders to the management as stated by standard procedures
• Engages in flexible work schedules to be able to perform well during emergencies
• Assists in emergencies, firefighting, and emergency evacuation procedures
• Ensures clear documentation of SOP's across the Maintenance department
• Advises on renovation, upgrading activities
• Coordinates and oversees special projects as directed

Requirements:

• Possesses Nitec/Higher Nitec/Diploma in Electrical/Mechanical related disciplines
• At least 2-3 years’ experience in building electrical systems, facilities maintenance preferably in hospitality sector
• Able to perform rotating shifts
• Experienced in using Microsoft Office, including Outlook, Word, Excel, PowerPoint
• Good communication and project management skills.
• Able to work well under pressure and balance multiple priorities and assignments.
• Must have the ability to adapt to change, be flexible and empathetic.

Other Information:

• 5 days work week (includes weekends/Public Holidays, according to roster)
• 3 shifts (0800hrs – 1700hrs / 1000hrs – 1900hrs / 1330hrs – 2200hrs)
• Daily Meals provided, evening shift allowance, generous Leave entitlement, health/dental insurance coverage, AWS and other good perks!
• 5mins walk from nearest Bus-Stop

To apply please click on the APPLY NOW button or email your resume to [email protected] with the following details inside your resume for faster processing:

• Reason for leaving
• Last drawn Salary
• Expected Salary
• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Jiang Yiang Dong

EA License | 14C7092

EA Registration Number | R1105012

Workshop Service Technician with experience servicing Downhole drilling tools (Jar, intensifier, Coil Tubing tools, Motor, Shock tool, agitator etc.) or hydraulic or mechanically operated equipment.

Job Responsibilities

• Fully competent in servicing hydraulic/mechanically operations tools.
• Experience with servicing NOV downhole drilling tools will be added advantage.
• Prepare tools for inspection/cleaning
• Prepare load-out tools for field
• Unload tools from field & check tool return
• Prepare service report after service or repair
• Prepare damage report
• A recognized performer who is sought out for technical expertise by peers
• Able to understand tool drawings
• Ability to take measurements with various measuring equipment
• Follow 5S implementation of workshop
• Report on weekly basis (Tools availability list) and on monthly basis
• Ad-hoc activities as assigned by the supervisor

Job Requirements

• GCE ‘O’/ ITE Certificate in Technical or Mechanical or equivalent
• Min 2 years experience in servicing Downhole tools in oil & gas industry is advantageous
• Basic English communication (verbal and writing)
• Experience with computer in MS office and email is desired (for completing service reports)
• Positive attitude, meticulous, self-driven, good interpersonal skills
• Able to work in a team

Key Responsibilities:

Machine Operation and Maintenance

• Safely set up, adjust, and operate a range of textile machines, including single jersey knitting machines, carding, yarn spinning equipment, yarn melting machines, woven machines, and other lab-scale instruments.
• Conduct routine maintenance tasks on machines and testing lab equipment, such as troubleshooting, coordinating with vendors for repairs, and scheduling regular maintenance.
• Basic understanding of electrical parts repair and troubleshooting is beneficial.

Quality Control and Testing

• Utilize measurement devices to ensure accurate production and conduct standard quality testing procedures on yarns, fabrics, non-woven materials, and membranes.
• Familiarity with general laboratory equipment like hotplates and hot-press machines is advantageous.

Adaptability and Documentation

• Quickly adapt to new equipment and processes, as well as evolving measuring procedures.
• Maintain meticulous records in the laboratory journal, documenting sample preparation conditions and testing results accurately.

Safety and Compliance

• Implement and adhere to all safety protocols and regulations within the laboratory environment.
• Attend regular safety training sessions, maintain safety records, and uphold safe working conditions.
• Ability to lift up feeders with polymers, containers and other parts of machinery up to 10-15 kg weight is necessary.

Job Requirements:

• High School diploma or equivalent.
• Experience working with textile manufacturing machinery is preferred but not mandatory.
• Strong willingness to learn and adapt to new technologies and processes.
• Excellent communication skills and ability to work effectively within a team.

Additional Information:

• This position may require occasional travel for education and training purposes.

Join Us: Be part of a collaborative and innovative team dedicated to pushing the boundaries of sport apparel and footwear. Apply now to embark on an exciting journey in textile innovation!

QC - 12-hr Day Shift:

• Inspect incoming raw materials and final products.
• Evaluate new source of raw materials
• Prepare product certificate of analysis
• Carry out calibration and maintenance of equipment and housekeeping of the QC laboratories
• Participate in quality and environment assurance operations
• Participate in investigation of product and process problem, customer complaint and any other quality related issue.
• Participate in continuous improvement program in QEHS

Requirements:

• ITE, Diploma or Bachelor Degree in Science
• Candidates with ‘O’ or ‘A’ level with relevant working experiences may apply
• Relevant working experience in QC/QA
• Good organization and time management skills
• Able to work independently

1. Lab Management

• Manage the laboratory's daily operations and analyzing of the precious metals content using scientific ways and any other duties related to the role.
• Manage laboratory set-ups including procurement and placement of all consumables, equipment, and fixtures.
• General maintenance of equipment and housekeeping of the laboratory.
• Monitoring the safety compliance of all lab consumables, equipment, and fixtures.
• Setting of the laboratory monthly and quarterly operational budget and monitor the budget closely.
• Responsible for the proper operation and maintenance of all analytical and laboratory equipment.
• Oversee related licenses applications.

2. Lab Sampling

• Instruct team members to prepare and do testing of precious metals laden samples from spent auto catalysts, electronic waste, gold refining etc on time and responsible for the test results.

3. Lab SOP

• Development of company’s Standard Operating Procedures for the testing and analysis.

4. Development & Implementation of new research.

• In charge of the gold & silver testing, drive the identification of testing and analytical methodologies for the testing and refining of base and precious metals from Spent catalysts, jewelries, and other precious metals laden scrap.
• Manage ICP & XRF and New Research and development of analytical and recovery methods and procedures.
• Work with the business team and other team members to support the development of capability and skill set to perform sample analysis of Precious Metals and determine the most efficient recovery strategy.
• Responsible for the development and implementation of gold and silver testing and refining technologies, ensure that the laboratory testing and refining level meet the market transaction standards.

5. Management of Team

• Involved in the recruitment (Interviewing) & retention of Lab staff and their skills upgrading.

Educational & Professional Qualifications

• At least Bachelor’s Degree in chemistry or any other equivalent qualifications.
• Minimum 5 years of working experience in of laboratory management experience.

Relevant Experience

• Familiar with ICP & XRF detection precious metal technology and have no less than 3 years of ICP & XRF laboratory testing experience.
• Master gold and silver detection and recovery and refining technology will be an added advantage.
• Have experience in setting up and overseeing up ICP & XRF Testing lab including the license application from the relevant authorities.
• Have experience choose and setting up of equipment and processes to recover precious metals recovery including gold, silver, platinum, palladium is an advantage. Best if he or she is experienced in recovery rhodium.
• Experience in ISO renewals will be an added advantage.
• Must be able to converse and read well in English.

Personal Characteristics & Behaviours

• Analytical and critical thinking with an open mind for creativity.
• Ability to work at strategic level as well as possessing the discipline to handle details.
• Strong communications skills to interface and relate to the different strata in the organisation and cultures.
• Ability to influence and negotiate desire end results.

1. Lab Management

• Manage the laboratory's daily operations and analyzing of the precious metals content using scientific ways and any other duties related to the role.
• Manage laboratory set-ups including procurement and placement of all consumables, equipment, and fixtures.
• General maintenance of equipment and housekeeping of the laboratory.
• Monitoring the safety compliance of all lab consumables, equipment, and fixtures.
• Setting of the laboratory monthly and quarterly operational budget and monitor the budget closely.
• Responsible for the proper operation and maintenance of all analytical and laboratory equipment.
• Oversee related licenses applications.

2. Lab Sampling

• Instruct team members to prepare and do testing of precious metals laden samples from spent auto catalysts, electronic waste, gold refining etc on time and responsible for the test results.

3. Lab SOP

• Development of company’s Standard Operating Procedures for the testing and analysis.

4. Development & Implementation of new research.

• In charge of the gold & silver testing, drive the identification of testing and analytical methodologies for the testing and refining of base and precious metals from Spent catalysts, jewelries, and other precious metals laden scrap.
• Manage ICP & XRF and New Research and development of analytical and recovery methods and procedures.
• Work with the business team and other team members to support the development of capability and skill set to perform sample analysis of Precious Metals and determine the most efficient recovery strategy.
• Responsible for the development and implementation of gold and silver testing and refining technologies, ensure that the laboratory testing and refining level meet the market transaction standards.

5. Management of Team

• Involved in the recruitment (Interviewing) & retention of Lab staff and their skills upgrading.

Educational & Professional Qualifications

• At least Bachelor’s Degree in chemistry or any other equivalent qualifications.
• Minimum 5 years of working experience in of laboratory management experience.

Relevant Experience

• Familiar with ICP & XRF detection precious metal technology and have no less than 3 years of ICP & XRF laboratory testing experience.
• Master gold and silver detection and recovery and refining technology will be an added advantage.
• Have experience in setting up and overseeing up ICP & XRF Testing lab including the license application from the relevant authorities.
• Have experience choose and setting up of equipment and processes to recover precious metals recovery including gold, silver, platinum, palladium is an advantage. Best if he or she is experienced in recovery rhodium.
• Experience in ISO renewals will be an added advantage.
• Must be able to converse and read well in English.

Personal Characteristics & Behaviours

• Analytical and critical thinking with an open mind for creativity.
• Ability to work at strategic level as well as possessing the discipline to handle details.
• Strong communications skills to interface and relate to the different strata in the organisation and cultures.
• Ability to influence and negotiate desire end results.

Job Highlights

• Company event
• Friendly working culture
• with OT
• Company transport

Position objective and summary

• To ensure all waste types are properly identified, received, sorted, treated and disposed of within regulatory requirements
• Monitor, plan and organise the waste/wastewater treatment system processing activities
• Submit reports on performance and progress.
• To ensure Evaporator systems running smoothly with pre-set parameters

Main tasks / activities / responsibilities

• To operate the Evaporator systems safely according to protocol, work procedures & SOPs and to advise line supervisor of any abnormality
• Assist with incoming waste management and system & equipment maintenance
• Conduct sampling of treated waste samples as instructed by line Lead
• Work with Line Lead, Operation Manager and Consultants to eliminate any possible bottlenecks in waste treatment procedures
• To ensure company’s treatment procedures are in line with regulatory requirements

Job requirements

• Willingness to communicate & build rapport with team of diverse cultures
• Solid organizational skills, including multi-tasking and time management
• Experience working in EHS and Permit-To-Work system
• Able to work independently
• Willingness to assist on the ground when the need arises
• Able to speak, read and write in English and Chinese
• Able to perform 12hr rotating shift
• Experience in evaporator & process plant supervisory role will be advantageous

· To work in workshop/offsite and onshore/offshore environment.

· Engage in duties both locally and overseas as and where required.

· Liaise with external parties.

· Testing and inspection service.

· Wire rope fabrication.

· Maintaining machines, tools and equipment.

· Ensure that all inspection and measuring instruments with valid calibration status are used for measurement/ inspection.

· Ensure safe handling of parts, materials and finished products to prevent damage and loss.

· Report any product defect/non-conformances to supervisor.

Other ad-hoc duties as assigned

1. Install, service and repair vending machines.

2. Maintaining vending inventories

3. Ordering repair parts and keeping service records

4. Organizing the warehouse space and keeping the cleanliness of warehouse.

5. Always maintain professionalism, tact, diplomacy, and sensitivity to portray the company in a positive manner.

Responsibilities:

• Responsible for daily laboratory activities, including in-process analyses, certifying tanks for product sales and laboratory support for ad-hoc projects.
• Participate in laboratory’s safety programs and maintain compliance to safety regulations and company’s safety standards.
• Develops working knowledge of analytical instruments and build foundation in instrument troubleshooting.
• Writes technical documents to describe accomplished work.
• Develops good communication skills and interface with other operations.
• Develop basic understanding of processes to facilitate daily analytical work.

Requirements:

• General understanding and practical application of laboratory techniques
• Basic analytical techniques utilized in the Laboratory
• Basic knowledge of statistical methods used in analyzing data.
• Good communication skills.
• Willing to be hands-on with laboratory instruments.
• Knowledge of:
• Principles of GC /HPLC/ICP
• Principles of statistical analyses.
• Fresh graduate / Experienced in laboratory analyses
• Minimum Poly / Diploma

Contract Period: From 25 March 2024 to 24 March 2025.

Personnel to be deployed at the following hours:

· Mondays to Fridays: 7:30am to 1:30pm.

· Service not required on Saturdays, Sundays and gazetted public holidays

· Personnel will not be required to do overtime.

The Services required are set as follows:

1) Assisting teachers in Science labs / classroom

- Prepare materials before science lessons for P3 to P6

- Preparation of materials for practical tests

- Assisting teachers in the labs during Science lessons

2) Assist in the upkeep of equipment in Science Lab.

- Assisting Teacher IC with:

- recording of loaning/breakage materials

- annual stocking taking of materials in the science lab

- Checking and clearing of unwanted or discard of faulty materials

- Maintenances of equipment by checking the workability of the equipment

- Liaising with vendors to ensure maintenance and checks on equipment are carried out

3) Maintenance of science lab.

- Maintain the tidiness and cleanliness of the labs

- Changing of new displays in the display cabinets

- To disinfect Science Labs rooms as and when required

4) Any other administrative work related to maintenance and upkeep of Science Labs.

5) Assists General Office with general administrative duties.

- Provide administrative support at General Office

- Provide customer service at the reception counter – attend to visitors including parents, staff, pupils and vendors.

i. Answer phone calls within three rings, record phone messages and attend to walk-in enquiries

ii. Make phone calls e.g. helping sick pupils to call parents

iii. Attend to goods delivery and direct them to the appropriate locations

iv. Escort contractors

v. Assist in logistics matters for e.g. packing of items, preparation of rooms for school functions; etc

vi. Shredding of documents

vii. To perform gate duties during school arrival and dismissal time and during time of heavy traffic

viii. Preparation and verification of documents, maintaining and updating of data records, filing and typing and data entry

- Accompany pupils and teachers on Learning Journeys as and when required

- Any other duties assigned by Principal, Vice-Principal and HOD/Science deemed necessary for a Science Lab Assistant

1. Install, service and repair vending machines.

2. Maintaining vending inventories

3. Ordering repair parts and keeping service records

4. Organizing the warehouse space and keeping the cleanliness of warehouse.

5. Always maintain professionalism, tact, diplomacy, and sensitivity to portray the company in a positive manner.

Our client is a well established Healthcare & Laboratory Equipment company. They are currently looking for a QC Laboratory Technician to join their expanding team.

Salary: up to Basic $3,000 + Meal Provided + Transport Allowance
Work Days: 5 Days (8am to 4:45pm from Mon to Fri)
Work Location: Boon Lay (near Boon Lay MRT Station)
Work Terms: Full-Time Permanent

Responsibilities:
• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products.
• Ensure all laboratory instruments and equipment are maintained and calibrated.
• Manage the inventory of quality reference materials such as QC reagents and lab consumables.
• Prepare daily QC report, relevant work instructions and validation protocol or reports.
• Ensure documents and quality records are maintained for easy retrieval.
• Manage operations towards timely support to meet factory analytical request.
• Develop training to build quality and safety awareness.
• To maintain cleanliness of laboratory and glassware.
• Handle administration work of factory when required.

Requirements:
• Min Nitec / Diploma in Chemical Process Technology or equivalent
• 1 to 2 years experience in handling wet chemistry and laboratory management
• Preferably (not a must) with knowledge on ISO9000, ISO 13485 and ISO14001 Quality Management knowledge and current Good clinical/ laboratory/ manufacturing/ pharmaceutical practices (cGXP)
• No colour blindness and willing to stand while doing lab work
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player
• Self-driven and motivated to improve processes

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Job Description

Assistant to Senior Pharmacist of CF operations.

• Understand the process and operations.

• Assist pharmacist to Lead a team of up to 15 staff and ensure that all are trained up to the predetermined competency level for the operations.

• Assist pharmacist to develop SOPs and procedure in accordance with the requirement of the customers and in alignment to STL’s policies.

• Plan work schedule and overtime accordingly base on workload.

• Assist pharmacist to provide reports whenever required in relation to the above.

• Assist pharmacist on document control of related documents is maintained timely and effectively.

• Customer engagement on work requirement and deviation reports.

• Ensure compliance of processes to SOP/WI and other GxP requirements.

• Carrying out deviations and CAPA report recommendations.

• Fronting of audit from customer and regulatory body.

• Ensure operations excellence throughout and aims towards zero error in the prescriptions filling due to negligence.

• Ensure Continuous Improvement is part of the operations

• Take on other appropriate assignments from time to time under the direction of the company.

Requirement

• At least a Polytechnic Diploma in Pharmaceutical Science or any discipline with at least 3 years of working experience is preferred
• However, candidate with no prior experience may apply.
• Candidate preferably has been working in a pharmacy in acute hospital setting
• Familiar with Windows, MS Office (Word, Excel, PowerPoint, Outlook, Project), Power BI is preferred