JOB DESCIPTION

Assist the Residence Manager / Property Executive on the day-to-day operation and maintenance of common areas and all matters related to the maintenance management of common property. He is responsible for the effective supervision, training, guidance and motivation of the on-site technician(s) under the team.

• To conduct daily checks to the essential equipment, ensuring that they are operating in satisfactory condition at all times. Spot irregularities and rectify them.
• To conduct regular inspection with term contractors (pest control, fire protection system, etc.) to ensure that the services are carried out / maintained to the standard set by the Management.
• To propose / recommend improvement, repairs and upgrading works when appropriate and ensure such are carried out properly when approved.
• To oversee the carrying out of these works when approved.
• To install additional power points to serve to new equipment and light fittings as and when needed.
• Trouble shooting of electrical breakdown.
• General maintenance of building facilities of the whole development.
• To check all common area lightings and replace defective lightings.
• To carry out minor building works or repairs.
• To maintain a record on the complaints received and work done.
• Subject to 24-hr recall in responding to emergency failures in the common property as and when required.

REQUIREMENT

• Candidate should possess at least Professional Certificate/NITEC in Engineering (Electrical) or equivalent.
• Organised, responsible, good team player and initiative with positive working attitude

• Assist Engineers: Support engineers in conducting all test-related activities.
• Product Configuration Setup: Implement and manage various product configurations.
• Testing & Troubleshooting: Analyze and troubleshoot product failures, working closely with process and test engineers to improve yields.
• Documentation & Reporting: Maintain and update test tracking records and working instructions (W/I).
• Training & Onboarding: Train new hires on working instructions and procedures.
• ISO Compliance: Assist in ISO implementation and ensure standards are maintained.

JOB DESCRIPTION

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE.

The Senior Technician/Technician – Centre Management System Support is responsible for ensuring all exhibits, audio-visual equipment, facilities, and essential services are available daily to support daily operations for centres/museums under Defence Collective Singapore (DCS), creating a safe, functional, and comfortable environment for employees, visitors, and customers.

RESPONSIBILITIES

• Daily Startup & Shutdown of Facilities, Exhibits, Attractions & Projection Systems.
• Maintenance and Repairs: Perform routine maintenance tasks, including plumbing, electrical, exhibition and gallery equipment, HVAC, and mechanical repairs to ensure the proper functioning of facilities and equipment.
• Building Systems: Monitor and maintain building systems such as heating, ventilation, air conditioning (HVAC), fire protection, and security systems to ensure compliance with safety standards and regulations.
• Contractor Coordination: Coordinate with external contractors, vendors and service providers for specialized repairs, installations, or renovations as needed. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set my DCS.
• Event Setup: Setup of logistics inclusive but not limited to AV Systems, Furniture, and equipment for events & daily organised visits.
• Inventory Management: Maintain inventory levels of supplies, tools, and materials needed for facility maintenance and repair activities.
  Recommend buying of critical spares and consumables for various facilities repair and improvement and participate in facilities improvement projects.
• Emergency Response: Respond to emergency situations, such as power outages, equipment failures, fire emergency/incidents or building damage, and implement appropriate measures to mitigate risks and minimize disruptions.
• Supervision and Leadership: Lead, supervise, and mentor a team of facilities technicians (interns & part-timers), providing guidance, training, and support to ensure high-quality service delivery.

REQUIREMENTS

• N-Level/O Level/ NITEC/ Professional Certificate.
• Preferable with 1 year working experience in similar roles. Fresh graduates are also welcome to apply.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Familiarity with computerized maintenance management systems (CMMS) or facility management software for work order management and asset tracking.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.w
• Physical stamina and mobility to perform manual labour, lift heavy objects, and work in various environmental conditions.
• Able to work on rotating shifts, weekends, and public holidays. Flexibility to work flexible hours, including evenings, weekends, and on-call shifts as needed, to address emergencies or urgent situations.

COMO Metropolitan Singapore is located in the heart of Singapore on Bideford Road. It is part of COMO Orchard, COMO Group’s newest immersive experience building which is the most complete iteration yet of the vision that brings together COMO Group’s hospitality, fashion, wellness and cuisine into one inspiring location. COMO Metropolitan Singapore’s 156 rooms and suites are spread over 11 floors with a rooftop pool bar that is exclusively for hotel guests. COMO guests also enjoy preferred access to some of the hottest tables in town including the first patisserie in Asia from renowned pastry chef Cedric Grolet, the Michelin-starred Korean steakhouse COTE and COMO Cuisine. The building also features a multi-label fashion retail space curated by Club 21 and a new flagship urban wellness space by COMO Shambhala. The result is an inspiring gathering place for innovators and creatives with a passion for the COMO-curated life.

Job Responsibilities:

• Attend to guest feedback/request
• Carry out inspections of MEP plant rooms and system
• Record utility consumption
• Carry out daily routine inspections of public areas
• Attend to breakdown and repair of equipment
• Respond to emergency incidents

Job Requirements

• Higher NITEC / NITEC in Building Services / Electrical / Mechanical Engineering.
• 1 to 2 years of working experience in hotel / commercial buildings
• Able to work weekends/shifts and Public holidays
• Trained in First Aid, Respond to Fire in the Workplace, Respond to Fire Emergencies in Building

•Prepare materials for production.
•Operate automated tools / manual tools.
•Perform fault clearance and provide observation.
•Comfortable navigating through menus/HMI.

•Perform document/Tracking records.

•At least 1-2 years of experience in production environment.

•Minimum Diploma is required.

• Strong knowledge in operating the tools.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

• Basic Up to $2400 (depends on experience)
• Allowances: Transport $80 + Attendance $40
• Perm role - 14 days A/L+ AWS+ Bonus+ Medical & Dental benefits
• Mon – Fri / 8.15am - 5pm
• Location: Tuas (with transport at Lakeside MRT)
• **Training provided for no experience

Responsibilities:

• Conduct inspection and lab testing on chemical samples
• Documentation of testing records
• Resolve non-conformance and defects issues

Requirements:

• Min. Nitec/ Diploma in Chemistry related field
• 0-2 years experience

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

Teo Hui Yee R22105757

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

Job Description

• Assist the Supervisor with General Repairs, Installations, Technical Services, Maintenance and Equipment.
• Support technical services and perform troubleshooting to identify and solve issues.
• Follow safety protocols and adhere to company guidelines during tasks.

Job Requirements

• At least 1 YEAR basic technical knowledge / working experience, Candidate with NO prior experience are welcome to APPLY
• WITH VALID SINGAPORE CLASS 3 DRIVING LICENSE
• TRAINING will be provided
• Ability ro follow instructions and work efficiently under supervision
• Able to start work immediately or within short notice

Responsibilities and Duties

· Support operations team with installation of new machine and various control components

· Work within standard operating procedures

· Adopt proper installation & assembly techniques

· Ensure cleanliness & proper maintenance of all work tools

· Maintain good housekeeping in the workshop at all times

· On-site work and related support services

· Assist with material and logistics handling

· To carry out maintenance tasks such as modification, overhaul and repair works to the specified standard in accordance to the maintenance data

· Inspection of test instruments, general maintenance of tools and rigs, condition of consumables and general conditions of work area

SPECIAL NOTES:

The incumbent (s) of this position is expected to perform all other related duties as assigned

Responsibilities:

• Inspect building systems (electrical, plumbing, HVAC, and mechanical) regularly to ensure proper functioning.
• Perform repairs and resolve issues quickly to minimize downtime.
• Monitor the performance of key systems and address potential problems proactively.
• Schedule and carry out preventive maintenance to avoid unexpected breakdowns.
• Ensure compliance with building codes and safety regulations.
• Respond promptly to emergencies, including electrical, HVAC, plumbing, and general issues.
• Maintain records of inspections, maintenance, and repairs.
• Coordinate with contractors for specialized repairs as needed.

Requirements:

• Experience as a Building Technician or similar role.
• Strong skills in maintaining electrical, plumbing, HVAC, and mechanical systems.
• Knowledge of building codes and safety standards.
• Ability to read technical manuals and blueprints.
• Good troubleshooting and problem-solving abilities.
• Flexibility to work outside standard hours for emergencies.
• Basic computer skills for reporting and documentation.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Various job scopes available!

Entry level Technician / Sernior technician roles in the Aerospace industry:

1) Inspect and examine aircraft components for leaks, cracks, breaks or other issues

2) Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogues, service bulletins and other maintenance documents to troubleshoot and complete work assignments

3) Maintain, repair, and rebuild aircraft structures, functional components, and parts such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, gaskets, and seals

4) Perform routine maintenance operations, such as the replacement of equipment’s and aircraft components

5) Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications

6) Interpret blueprints, specifications, or diagrams to inform installation, development or operation activities

7) Perform hourly, daily and monthly inspections to check for cracks, oil leaks, burned areas, foreign object damage, warping, distortions, missing segments and wear

8) Complete all tasks in the allotted time frame and to the quality standards of our company, our customers and the FAA

9) Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns

10) Order supplies, equipment, materials and parts for repairs and general maintenance

11) Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts

Requirements:

• Relevant Diploma qualifications in Aerospace Technology / Aerospace Engineering / Engineering (Aerospace) / Mechanical / Mechatronics / Electroncis / Electrical Engineering etc.
• Independent
• Proactive and keen interest to learn
• Willing to perform hands-on work
• Willing to learn and are flexible with working hours, able to peform shift if required.

Interested candidates, please forward a detailed resume and email to career{a}tempserv.com.sg

Tempserv Pte Ltd

License No: 06C3745

Attention: Wee Wan Qi / EA Personnel No: R22109446

Mission/purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to UD/Volvo Quality Standards.

Key responsibilities/Accountabilities:

• To perform all basic troubleshooting and basic diagnostics with appropriate recommendations (With guidance from Team Leaders where appropriate)
• To check and provide correct recommended Parts details in the Work Order as and when required.
• To carry out Service Maintenance on the trucks including:

- Power Steering Diagnostics and Repair

- Engine Overhaul

- ESCOT Control Housing Overhaul

- ESCOT Gearbox Overhaul

- Rear Axle Overhaul

- Advanced Multimeter Measurements and Wiring Repair

- Emission Related System

- Fault tracing and repair electrical system via Tech Tool test, Calibrate and programming

• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc)
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice and procedures adhering to manufacturers standard 4 (Singapore).
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• Attend upgrading courses as and when available
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Adhere to UD/Volvo processes and policies.
• Any other duties assigned by your immediate superior.

Essential educational and/or training qualifications and certificates

• NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field.
• Preferred with valid Class 3 / 4 / 5 driving license (Singapore).

Preferred experience and knowledge

• Minimum of 4 – 6 years working experience in servicing and repairing heavy trucks (Japanese and Continental brands).
• Basic Vehicle Principles and Concepts.
• Advanced engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.

Necessary technical/functional/language skills

• Basic Hydraulics
• Power Steering Diagnostics & Repair
• Brake System & Diagnostics
• Diesel Engine
• Electrical Wiring Repair
• Multimeter Advanced Measurements
• Engine Overhaul
• Emission Related System
• Preventive Maintenance
• Transmission check and adjustments
• Rear Axle Overhaul
• ESCOT Gearbox Overhaul, Control Housing Overhaul, Voith Retarder Overhaul
• Telematics
• Compressor cooling basic
• Computer skill
• Completed Curriculum and related Assessment for Technician Level III –Service & Basic Repair

• Provide support to end users by addressing their technical concerns and inquiries.
• Assist with operating system migrations and offer related technical support.
• Diagnose and resolve hardware and software issues, ensuring efficient troubleshooting.
• Take responsibility for resolving all problems related to a defined list of end-user equipment and software.
• Install and configure software applications as required.
• Ensure accurate and timely documentation in the IT Service Management (ITSM) tool.
• Resolve and close assigned incidents, prioritizing ticket resolution within established Service Level Agreements (SLAs).
• Adjust and synchronize application settings to align with environmental requirements.
• Handle the relocation and setup of computer devices and peripherals.
• Configure user profiles for various applications as needed.
• Provide proactive updates and follow-ups to end users on the status of their issues.
• Offer guidance to end users on completing specific tasks related to their technical needs.
• Perform additional tasks and responsibilities as assigned.

To apply, please visit www.gmprecruit.com and search for Job Reference:24987

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Job Descriptions

• Carrying out maintenance, repairing and servicing tasks (Electrical /Aircon / Mechanical / Building / Repairs).
• Carry out preventive / breakdown and corrective maintenance of M&E works or Aircon or Building.
• To carry out maintenance operations for facilities or buildings , including troubleshooting and repairing mechanical, electrical, and plumbing systems
• Attend to defects and customers' complains promptly. Respond to any fault reports, client requests, or any breakdowns efficiently.
• Performing regular maintenance and repairs on the building facilities or systems to ensure smooth operation. Reporting any fault issues to the supervisor.
• Conduct preventive checks and troubleshooting on the M&E systems.
• Record or inform supervisor of any faults or issues during routine checking.
• Perform any other ad hoc duties assigned

Requirements

• Minimum 2 years and above in Facilities Maintenance or M&E Engineering / Building Maintenance company
• NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Electronics /Building / Facility Management or facilities maintenance

5.5 work day week

Singaporeans ONLY

Able to work on shifts ( allowance will be provided)

Near Whiteley Road / Mount Pleasant Road , accessible by Bus

Auristone is an Asian-based epigenomic profiling company with data analytics capabilities that spun out from Genome Institute of Singapore (GIS) in 2021 with the vision to be the largest curator of Asian Epigenomic database to drive epigenomic discoveries. We are currently seeking a Laboratory Technologist to actively participate in driving the service offerings in the company. This role will also require the candidate to support the end-to-end workflow for our flagship products EPI-CALL™ and Signomax™.

Job Responsibilities:

1. Handle the receiving and testing of samples/specimens received.

2. Perform Quality Checks (QC) where required.

3. Record all experimental findings in accordance with company regulations.

4. Communicates experimental results, and issues faced, to reporting officer.

5. Support lab inventory and procurement of reagents, consumables, and equipment, when required.

6. Perform routine equipment maintenance and calibration as per SOP requirement, when required.

7. Communicate and cooperate with team members and conform to all rules and regulatory requirements of lab facilities.

8. Prepare documentation, reports, and present experimental findings and data.

9. Any other ad-hoc activities required by the role.

Skills/Qualifications

1. Highly organized, able to multi-task, and ability to pay close attention to details. Rigorous execution of experimental protocols is critical.

2. Ability to work in a collaborative manner with reporting officer, to achieve long- and short-term goals is required.

3. Ability to perform basic data analysis and interpretation and perform troubleshooting experiments when required.

Education/Experience Requirements

1. Qualification: Bachelor of Science in Molecular Biology, Biomedical Sciences, Biomedical Engineering or related field.

2. Work experience: 1-3 years.

3. Technical skills:

a. Proficiency in DNA/RNA extraction from FFPE samples is preferred, but not required

b. Proficiency in Next Generation Sequencing (NGS) workflow and sample library preparation is preferred, but not required.

c. Basic knowledge in molecular biology techniques

d. Proficiency in MS Excel, including basic functions and formulas.

Vista Musical Instruments is an innovative, global collective of music-related brands dedicated to building meaningful products and experiences for the music community. Brands include MONO, Harmony, Heritage Guitars, Teisco, Swee Lee, Dawsons, and Manny’s. Vista Musical Instruments is headquartered in Singapore, with operations in the USA, UK, and APAC, and is a part of Caldecott Music Group.

Established in 1946 and headquartered in Singapore, Swee Lee is South East Asia's leading omni-channel musical instrument and lifestyle retailer and distributor. Committed to community and creativity, the brand's mission is to be the region's trusted house of music and expression. Swee Lee is known for curating immersive experiences at their cafes and Local store concepts, and matching customers with the products and services they need throughout their musical journey. With a legacy rooted in thoughtfulness, resourcefulness, and enthusiasm, Swee Lee embodies a passion for music that resonates across the region. Swee Lee is a part of Vista Musical Instruments and has locations in 5+ countries across South East Asia.

Job Overview

We are looking for an experienced guitar technician to join our regional team. The role is based in Singapore and will be focused on delivering the best possible customer service for the musical instrument repair industry. We want somebody who is self-driven, passionate, and very organized. Someone who matches our spirit and desire and to keep challenging ourselves to push to be the best in the industry.

Responsibilities

• You will test, inspect and repair acoustic and electric guitars.
• You will evaluate damaged guitars to determine whether fixing them is cost-effective.
• You will maintain, clean, and do setups for new and used electric and acoustic guitars.
• You will build parts and troubleshoot electronics as part of your repair responsibilities.
• You will be familiar with electronic effects, tuners, pre-amplifiers, amplifiers, and pedalboards, and know about a range of audio engineering and electronics concepts—such as impedance, signal phase (for speakers and microphone wiring), and input voltage for pre-amps and effects. You will know how to use a soldering iron and a multi-tester, and how to do basic electronics troubleshooting.
• You must have an ear for music, and for musical tones and sounds.

Requirements

• Intermediate to advanced knowledge of repairing musical instruments, particularly guitars.
• You are passionate about musical instruments, and music in general. Ability to play guitars is a plus.
• You are proactive, responsive, responsible and ready to go beyond the call of duty.
• You are a team player.
• You are detail-oriented.
• You have an ability to diagnose and fix problems.
• You are customer-focused, a solid communicator with great people skills.
• You can work within an established, structured system.
• Technical training and experience is preferred for this role.

Benefits

• Competitive Remuneration
• Healthcare, Dental & Insurance Programme
• Various Leave Benefits eg. birthday, volunteer, family care, childcare
• Long Service Awards
• Employee Referral Programme
• Gym Membership Discount
• Attractive Staff Discount at our academy, purchase of musical instruments and lifestyle products

We are looking for a skilled Robotics Technician with a minimum of 2 years of experience in robot testing, assembly, control, and manipulation of robotic arms, as well as deployment support. The ideal candidate will be detail-oriented, technically proficient, and capable of working both independently and as part of a team to ensure the optimal performance of our robotic systems.

Responsibilities:

• Assemble and test robotic systems and components.
• Conduct diagnostics and troubleshooting to ensure the proper function of robotic arms and related equipment.
• Perform regular maintenance and calibration of robotic systems.
• Control and manipulate robotic arms for various applications, ensuring precision and accuracy.
• Provide on-site deployment support and assist in the integration of robotic systems.
• Collaborate with engineers and other technicians to optimize performance and address any issues.
• Document testing procedures, maintenance tasks, and any modifications made to the systems.
• Stay updated with the latest advancements in robotics technology and industry best practices.

Qualifications:

• Relevant technical certifications or an associate degree in robotics, mechatronics, or a related field.
• Minimum 2 years’ experience in robotics testing, assembly, control, and manipulation of robotic arms.
• Strong understanding of robotic systems, including hardware and software components.
• Proficiency in using diagnostic tools and equipment for troubleshooting and maintenance.
• Good communication and teamwork skills.
• Attention to detail and problem-solving abilities.

Our Production Technicians operate our chemical processes and perform production related activities, utilizing their chemical manufacturing knowledge and experience to operate and troubleshoot the plant in a safe and efficient manner. The Production Technician works in a team environment where collaboration and teamwork are critical to meeting the goals of the business.

Production Technicians are required to work shift work including nights, weekends, and holidays.

Job Responsibilities include but are not limited to:
- Safely and efficiently operates their assigned processes to meet the day-to-day quality, production and productivity goals of ALAM.
- Effectively prioritizes their daily tasks working with the Production Leads and Production Supervisors.
- Participate in monthly safety meetings and promote a safe work environment
- Actively participate on ALAM’s emergency response (ER) team and ER entry team
- Reviews and updates the Standard Operating Procedures
- Reviews and updates the Learning Resources for the processes
- Completes annual personal goals to achieve the plant goals and their own personal development goals
- Assembles and disassembles production equipment
- Performs basic maintenance on equipment
- Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
- Successfully complete all assigned training
- Cross-trains peers on approved functions
- Ability to roll cylinders- Rolling cylinders requires an individual to tilt a cylinder slightly with one hand, and use the other hand to move the cylinder forward by rolling it
- Fitness for duty, including but not limited to: ability to lift 50 pounds and have the ability to climb ladders
- Actively participate on ALAM’s emergency response (ER) team including as an ER entry team member, which requires wearing a tight fitting full-face respirator

Test Execution:

• Perform mechanical, electrical, and functional tests on automotive components, assemblies, and vehicles.
• Conduct tests such as durability, safety, environmental (e.g., temperature, humidity), vibration, and performance evaluations.
• Ensure all test setups are accurate, safe, and meet the specified requirements for each test scenario.

Test Equipment Maintenance:

• Set up, calibrate, and maintain testing equipment and instrumentation, ensuring all tools and equipment are functioning properly.
• Troubleshoot and repair testing devices when necessary.
• Ensure that equipment is compliant with calibration and safety standards.

Data Collection & Analysis:

• Record test data accurately and systematically, ensuring proper documentation and reporting.
• Analyze results to identify trends, anomalies, or potential issues, providing detailed feedback to engineers and management.
• Assist in developing test plans and protocols for new products or systems.

Compliance & Quality Assurance:

• Ensure all testing is performed in compliance with internal standards, industry regulations, and quality guidelines (e.g., ISO, SAE, etc.).
• Support the Quality Assurance team in verifying product specifications and quality benchmarks.
• Assist in preparing test reports for internal reviews, regulatory compliance, and customer submissions.

Collaboration & Support:

• Work closely with engineers, designers, and production teams to provide insights and feedback on product performance.
• Assist in the identification and resolution of issues during the testing phase.
• Support continuous improvement initiatives to enhance testing processes and product quality.

Safety and Documentation:

• Follow all safety protocols and guidelines to ensure a safe working environment.
• Document and report any safety or technical issues encountered during testing.
• Maintain accurate records of tests performed, including results, methodologies, and deviations from standard procedures.

Assist in other related duties assigned by Manager as and when necessary.

Qualifications

• Minimum O/N levels or equivalent; An associate diploma or higher in a related field is preferred.
• Minimum 2-3 years of experience in automotive testing, quality control, or a related technical role.
• Demonstrated ability to read and interpret complex technical drawings, schematics, and blueprints with precision.
• Exceptional attention to detail and a high level of manual dexterity.
• Excellent communication skills and the ability to work collaboratively in multidisciplinary teams.
• Proven ability to maintain a clean, organized, and efficient work area.

Physical Requirements:

• Ability to sit or stand for extended periods, often in a fixed position.
• Excellent hand-eye coordination and manual dexterity.
• Capability to lift and move components and assemblies as needed (up to 20kg).

Other Information

Working Conditions:

• Work is performed in a high-precision manufacturing or laboratory environment.
• Use of personal protective equipment (PPE) as required.

Additional Requirements:

• Willingness to undergo continuous training and stay updated with the latest advancements in precision assembly techniques.
• Flexibility to work overtime or shift hours if required.
• Certification in relevant areas (e.g., IPC certification for electronic assemblies) is a plus.

Established company located in Tuas looking for experienced production technician to join its production team. Candidate have sound knowledge in operating and maintaining CNC router machine, Fiber/ CO2 laser-cutting machine, large-format production printer.

Working hour is from 9am to 5.45pm (Mon to Fri); 9am to 1pm (Sat); Rest day (Sun & PH).

Interested party, please whatsapp Eric @92744949 or email to [email protected]

Our client is transforming the cleaning industry with advanced robotic solutions that tackle manpower challenges. Their innovative robots are already making a difference in 30 countries. As they continue to grow, they are seeking a Service Technician to join their team. The position may require you to travel to different countries within the Asia region.

Key Responsibilities:

• Provide technical assistance during product demonstrations and sales trials to help customers understand our cleaning robots.
• Train customers on how to use and maintain our cleaning robots, and certify them for proper operation.
• Address technical inquiries, quickly identify issues, and troubleshoot robot malfunctions to ensure minimal downtime and maintain customer satisfaction.
• Work with internal teams to address and solve robot issues, both on-site and for factory returns.
• Stay updated on the latest robot technologies and use this knowledge to assist customers.
• Collect feedback to help improve the product and share insights with the R&D team.
• Travel to customer sites as needed for onsite support, training, and troubleshooting services.
• Assist with any additional duties assigned by the manager.

Requirements:

• Diploma or certificate in electrical, electronics, or mechanical engineering.
• 2-3 years in technical support or servicing, ideally in robotics or automation.
• Strong troubleshooting and problem-solving capabilities.
• Excellent communication and interpersonal skills for effective customer training and support.
• Ability to collaborate effectively with cross-functional teams.
• Up-to-date knowledge of the latest advancements in cleaning robot technologies.
• Must be willing to travel for customer support and training.
• Class 3 driving license is a plus.
• Interested candidates are invited to send in your Resume in MS Word Format stating your past work experience, reasons for each leave, past and expected remuneration.

We regret to inform that only shortlisted candidates will be notified.

By submitting an application to us, you will be deemed to have agreed for us to collect, use, and disclose your personal data which you have submitted to your prospective employers, for the purpose of job search, and/or other services which you have consented us to perform on your behalf.

Attn: Woo Gu Ming (R24123795)

Cultivar Asia Pte Ltd (MOM EA License: 19C8782)

Responsibilities:

• In charge of Renewable Energy Biomass Boiler ,Steam Turbine and ancillary units operation and maintenance.
• Bio-mass Fuel arrival co-ordination.
• Control and check-up all the operation parameters and safety system in boiler , Steam turbines and ancillary units.
• Report to the Plant Supervisor/Engineer, immediately in case of any break down and other Emergency problems at any time.
• Fill up the check list and log sheet with proper supervision.
• Plant Safety and House keeping.
• Involve in plant routine maintenance.
• Involve in operating the equipment and hands-on manual work to enable smooth flow of work.
• Boiler and Feed water quality analysis.
• Chemical dosing supervision.
• Ensure proper shift hand over to their fellow colleagues.
• Any other adhoc duties as and when delegated by Plant Engineer and the Management.

Requirements:

• Minimum Secondary education or graduated from ITE in Mechanical or Electrical
• Ability to exercise initiative and follow instruction given
• Computer literate and able to write and communicate in English
• Willing to work on 12 hour shift pattern (day or night shift)
• Candidates who have attained class 1 or 2 Boiler Attender certification will be an added advantage

• Provide support to end users by addressing their technical concerns and inquiries.
• Assist with operating system migrations and offer related technical support.
• Diagnose and resolve hardware and software issues, ensuring efficient troubleshooting.
• Take responsibility for resolving all problems related to a defined list of end-user equipment and software.
• Install and configure software applications as required.
• Ensure accurate and timely documentation in the IT Service Management (ITSM) tool.
• Resolve and close assigned incidents, prioritizing ticket resolution within established Service Level Agreements (SLAs).
• Adjust and synchronize application settings to align with environmental requirements.
• Handle the relocation and setup of computer devices and peripherals.
• Configure user profiles for various applications as needed.
• Provide proactive updates and follow-ups to end users on the status of their issues.
• Offer guidance to end users on completing specific tasks related to their technical needs.
• Perform additional tasks and responsibilities as assigned.

To apply, please visit www.gmprecruit.com and search for Job Reference:24987

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

• Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
• Programs lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
• Sets-up lathes and adjusting three- and four-jaw chucks, tools, and attachments.
• Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to Drawing Requirements.
• Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions;
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents actions by completing production and quality logs.
• Maintains safe operations by adhering to safety procedures and regulations.
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

SENSOR SYSTEMS TECHNICIAN (Chip Level Service)

Job Description & Requirements

We are looking for a servive technician in long term basis (Two years) with following skills and able to work week end days and puplic holidays.

Acadamic qualifications: Diploma or any degree with two years relevent exprience.

Duties and responcibilits ;

1) Must kows chip lavel service of all smart phones like Apple, Samsung,oppo,Vivo,Honor and realme.

2) Need to know all charging ports and all part replcement onspot ontime also.

3) Must know to solve all software issue and remove user locks,

4) Must know all brand laptop and desktop hardware and software repair

5) Must know all brand tablets repair.

Renumaration :$4000.00 to $7800

Working houres: 4pm to 11 pm.