Job Scope:

(a) Maintain general cleanliness of equipment in the Cookery Rooms to ensure clean and hygienic condition for teaching and learning;

(b) Assist Teachers in preparation of ingredients for practical lessons eg mincing of meat, measure and apportion ingredients etc;

(c) Keep stock of ingredients in Food Labs to ensure sufficient supplies for teaching and learning;

(d) Clear Food Labs after lessons: cleaning of workbenches and sinks, sweeping of floors and mopping of floors, clearing of rubbish etc;

(e) Maintain general cleanliness of equipment and workplace in designated rooms; and

(f) Any other relevant duties assigned by the school supervisors and school leaders.

Working Arrangement:

Working Hours:

· Mondays to Thursdays: 7 am to 4.30 pm, inclusive of 1 hour lunch break.

· Fridays: 7 am to 4 pm, inclusive of 1 hour lunch break.

· Service not required on Saturdays, Sundays and gazetted public holidays.

Salary: $2300/Month

Contract Duration: 1 Jan 2025 to 31 Dec 2025

Job Requirements:

Candidate preferably have experience as an NFS Assistant in schools.

Be able to observe strict hygiene when preparing food ingredients for NFS lessons;

Job Description

• Assist in new material and process development.
• Perform chemical analysis for product release and testing projects.
• Ensure testing adheres to procedures.
• Identify and isolate unusual contamination sources.
• Develop test method validation protocols for microbiological control processes.
• Ensure documented sterilization procedures are available and monitor sterilization facilities.
• Train new lab staff and assess training effectiveness.
• Supervise junior technicians, including troubleshooting equipment.
• Manage lab consumables purchase, inventory, and expenditure.
• Investigate microbiological, environmental, and chemical analysis failures.
• Conduct or review internal calibration and maintain calibration records.
• Verify tagging and certificate of analysis for product release.
• Review test results from QA technicians.
• Troubleshoot equipment breakdowns.
• Verify chemical mixing processes comply with procedures.
• Perform other tasks assigned by superiors.

Requirement

• Diploma in Chemical/Chemistry/Pharmaceutical
• No need experience , training provided

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Senior Lab Assistant to be part of their team for ongoing transformation projects.

This is a 1 Year contract (Convertible) role. They are located at Buona Vista – Walking distance from the MRT station.

5 days work week - Monday to Friday (8.30 am to 5.30pm)

Responsibilities:

• Coordinate work assignments and ensure timely equipment calibration.
• Mentor and train staff using standardized programs.
• Ensure adherence to organizational standards for customer work and team performance.
• Perfume compounding and material selection according to formulation requirements.
• Preparing for odor evaluations to maintain fragrance quality.

Requirements:

• Diploma in Applied Chemistry, Perfumery and Cosmetic Sciences, or Chemical Engineering.
• Preferably 1-2 years of experience in a chemistry laboratory environment.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Attention to: Alethea

EA License No: 19C9682
Reg No: R21101676
Ng Zhi Qing Alethea

Job Description

• Assist in new material and process development.
• Perform chemical analysis for product release and testing projects.
• Ensure testing adheres to procedures.
• Identify and isolate unusual contamination sources.
• Develop test method validation protocols for microbiological control processes.
• Ensure documented sterilization procedures are available and monitor sterilization facilities.
• Train new lab staff and assess training effectiveness.
• Supervise junior technicians, including troubleshooting equipment.
• Manage lab consumables purchase, inventory, and expenditure.
• Investigate microbiological, environmental, and chemical analysis failures.
• Conduct or review internal calibration and maintain calibration records.
• Verify tagging and certificate of analysis for product release.
• Review test results from QA technicians.
• Troubleshoot equipment breakdowns.
• Verify chemical mixing processes comply with procedures.
• Perform other tasks assigned by superiors.

Requirement

• Diploma in Chemical/Chemistry/Pharmaceutical
• No need experience , training provided

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

• Assisting in setting up the test equipment for production and engineering team.
• Handle all Test & Backend Equipment sustaining i.e. Bench, ATE, Handlers, Thermostream, ICOS, Laser Mark, etc.

Requirements:

• Nitec in Electronics / Electrical Engineering, Mechanical, Biomedical, Mechatronics
• Able to work rotating 12-hr shift

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Service Technician (Printer)
• Working Location: Aljunied
• Working Hours: 5 days (3 days in Singapore, 2 days in Johor) (8.30am – 6.00pm)
• Salary Package: Basic $2,100 + AWS
• Duration: Permanent

Key Responsibilities

• Provide on-site technical support and maintenance for printers, ensuring they operate efficiently and effectively.
• Perform troubleshooting, diagnostics, and repairs on various printer models.
• Conduct routine maintenance and servicing to prevent equipment breakdowns.
• Install and set up new printers and related equipment at customer sites.
• Provide technical training and support to customers on the proper use and maintenance of printers.
• Maintain accurate service records, including details of repairs, parts used, and customer interactions.
• Coordinate with the technical support team to resolve complex issues and ensure customer satisfaction.
• Travel between Singapore and Johor to provide service coverage as required.
• Ensure compliance with safety guidelines and maintain a clean and organized work environment.
• Stay updated with the latest printer technologies and industry trends.

APPLY NOW!!!

• GCE O-Level or higher.
• 1 year of experience in servicing and repairing printers or similar equipment is advantageous.
• Strong technical skills with the ability to diagnose and fix hardware issues.
• Good understanding of printer mechanics and electronics.
• Excellent problem-solving and troubleshooting abilities.
• Strong communication and customer service skills.
• Ability to work independently and as part of a team.
• Willingness to travel between Singapore and Johor as required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67174 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing and Production
• Position Title: Maintenance Technician / Service Technician
• Working Location: Gul Circle
• Working Hours: 5 days (Mon – Fri, 8 am – 5.15 pm), OT on Alt Sat 8 AM - 4:30 PM
• Salary Package: Basic salary + Fixed Allowance $60 + Transport Allowance + Attendance Allowance + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Ensure smooth supply of facility to production section
• Maintain and ensure reliability of machines
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Filing of all machine maintenance life history
• Safety of all machines for production and quality
• Calibration of machines
• Other general maintenance works

APPLY NOW!!!

• At least 1 year of relevant work experience.
• Good interpersonal & communication skills.
• Must be able to lift heavy objects.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65731 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Food Manufacturing
• Position Title: Maintenance Technician
• Working Location: Senoko
• Working Hours: 5.5 working days (Mon to Fri 8.30 AM – 5 PM, Sat 8.30 AM – 12.30 PM)
• Salary Package: Basic Salary + OT + Rental Allowance + Meal Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Perform monthly preventive maintenance job as per planned schedule
• Support production machinery with troubleshooting and repair work
• Liaise with external vendors to resolve major machine issues
• Assist superior with new production equipment installation and commissioning
• Comply with food safety and workplace safety and health (WSH) requirements
• Any ad hoc duties as assigned

APPLY NOW!!!

• Minimum NITEC in Engineering or equivalent
• At least 1 year of working experience in the maintenance field of the food industry

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66084 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Distributors & Servicing of Boiler and Laundry Equipment
• Position Title: Service Technician
• Working Location: Nearest MRT – Toa Payoh/Potong Pasir
• Working Hours: Monday – Friday, 8 am – 5 pm, Saturday, 8 am – 1 pm
• Salary Package: Up to $2,800 + AWS + VB + OT
• Duration: Permanent

Key Responsibilities

• Execute installation tasks for equipment such as steam boilers and laundry machines.
• Conduct repairs, perform troubleshooting, and provide servicing for various equipment types.
• Respond promptly to service requests and perform maintenance work at customer locations as needed.

APPLY NOW!!!

• Basic electrical/mechanical knowledge.
• Ability to read electrical drawings.
• Candidates with experience in steam boilers and laundry equipment will be advantageous.
• Candidates with valid Class 3 Driving License preferred.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67050 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Healthcare / Medical (Dental Laboratory)
• Position Title: Dental Technician
• Working Location: Ubi
• Working Hours: 5.5 days (Monday – Friday 8.30 AM to 5.30 PM, Saturday 8.30 AM to 12.30 PM)
• Salary Package: Basic Salary up to $2,300 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Read and interpret doctors’ prescriptions.
• Download digital scans and upload files for fabrication.
• Operate CAD/CAM equipment such as milling machines.
• Create and perfect models from dental impressions.
• Build and repair dental prostheses such as crowns, bridges, onlays, and veneers, using both traditional and digital methods.
• Personalize dental prostheses to fit and function correctly according to the prescription.
• Ensure all products meet quality standards before delivery.
• Work closely with team members, dentists, and dental partners to achieve the best results for patients.
• Manage and order dental materials and equipment.
• Maintain equipment, arrange for servicing and repairs when needed.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum GCE O Level, NITEC or equivalent
• Prior experience in a dental laboratory is an added advantage
• Competent with computer and smartphone applications/software

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67110 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The Mechanical Technician performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 4 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Job Description

• Perform visual & final inspection on-sites.
• Identify any potential hazards or malfunctions that could compromise the safety of passengers using the elevator.
• To verify and ensure all functions are in compliance with the standards and safe for passenger usage
• Ensure that work is prepared, processed and inspected in accordance with ISO requirements.
• Deliver test weights to job site for completion of Annual Inspections
• Any other duties as assigned

Job Requirements

• Candidate must possess at least a NITEC in Mechanical, Electrical Engineering or NITEC in Building Environment (Vertical Transportation) or equivalent.
• Minimum 3 years of working experience in lift industry
• Proven communication and inter-personnel skills.
• Achiever with self-motivation attributes.
• Able to work in a team or individual.
• Mature, responsible and discipline personality.

We regret to inform that only shortlisted candidate will be notified

ROLE PURPOSE

The Instrument/Fire & Gas Technician performs mechanical completion, pre-commissioning, and commissioning activities.

ROLE CONTRIBUTION

• To complete Mechanical Completion, Pre-commissioning, and Commissioning activities in accordance with the project completion plan and schedule, the Instrument/Fire & Gas Technician should:
• Understand their roles and responsibilities and ensure compliance.
• Comprehend the project completion execution plan from the Discipline Lead Technician.
• Familiarize with the Notification of Energization (NOE) Flow Chart.
• Fully understand System Drawings and Walk Down procedures.
• Complete a Daily Report to provide clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Toolbox Talk to understand daily activities.
• Perform Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team, ensuring compliance with project drawings and specifications.
• Conduct Pre-commissioning Activities (‘B’ Scope ITRs) in line with vendor documentation and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the Discipline Lead Technician.
• Utilize specific tools and test equipment for system commissioning safely and with quality.
• Assist field service vendors in conducting system commissioning.

EDUCATION, EXPERIENCE & CERTIFICATION

Education:

• Technical College diploma in Automation, Instrumentation & Control, or Electrical disciplines, or equivalent.

Experience:

• Minimum of 4 years' construction or commissioning experience in the Oil & Gas Industry, especially for Offshore products and systems. Experience with FPSO is strongly preferred.
• Proficient with Completions Tools (ECOM) and documentation.
• Knowledgeable in PTW and JSA.
• Competency in Ex Qualification such as CompEx, IECEx COPC, or equivalent training and experience.
• Valid Sea Survival OPITO certificate BOSIET/HUET is an advantage.

Discipline Skills:

• Assisting the yard team with Instrumentation installation and performing Pre-Commissioning/Commissioning for Instruments on Topsides, Vessels, and various packages.
• Knowledge of control systems including ICSS and PLC systems. Experience with Siemens PCS7 DCS and Siemens loop wiring is a strong advantage.
• Proficient in fault-finding and repairing instrumentation/electronic systems and equipment in control panels and in the field.
• Skilled in installation, calibration, testing, and troubleshooting for all types of Field instrumentation including Temperature, Flow, Level, and Pressure Transmitters, Analyzers, and condition monitoring sensors for rotating equipment.
• Experienced in Installation, Pre-commissioning, and Commissioning of Fire and Gas detection systems and associated detectors and executive action means (Fire and Heat Detectors, open path flammable and toxic gas detectors, SDV, ESDV, BDV, etc.).
• Skilled in installation, calibration, testing, and troubleshooting for all types of valves, especially control valves (pneumatic, hydraulic, or electrical) and various types of actuators and positioners.
• Proficient in Instrumentation cold and hot loop checking activities.
• Experienced in interpreting all engineering documents including Instrumentation Datasheets, P&IDs, Cause & Effect Diagrams, Loop Drawings, etc.
• Experienced in using test equipment including pressure calibrators, HART Communicators, Multimeters, etc.
• Familiar with the concept of Commissioning Systems and the representation of the same using Limits of System Hanover Documents.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Reza Johannes: R1657042

The Senior Mechanical Technician Topsides performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 10 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Job Description:

• Able to do assembly and disassembly various electrical components like Galley Ovens, Water Heaters and Bulk and Aft Cargo Heaters.
• Those without relevant product experience are welcome to apply as training will be provided.
• Able to read and understand Component Maintenance Manual and drawings.
• Able to use simple measuring instrument,
• Able to complete any given task in a short time.
• Must possess knowledge of authorities’ regulations.
• Must Understand Human factors limitations and comply with companies’ safety and quality policy.
• Work to clearly defined procedures under day-to-day supervision and maintain 5 S in workshop areas.

Requirements:

• Must have at least 2-3 years of Aviation Electrical/Avionics experience.
• Must be a team player.
• Must be able to communicate effectively with CS, Engineering and Quality dept.
• Must use clearly defined procedures to deliver results under guidance.
• ls self-motivated able to organize own time and deliver against priorities set by others.
• Must meet objectives as defined in annual appraisal.
• Holders of EASA M9 and M10 are an added advantage.

Job Description

Industry/Organization: F&B Production

Position Title: Production Engineering Technician

Working Location: Bedok

Working Hours: 5 days (Mon – Fri, 9.00 am – 6.30 pm)

Salary Package: range $3000 - $3,300

Duration: Full Time

Key Responsibilities

To lead and manage team of production staff to achieve production quantity.

To identify issues in efficiency and suggest improvement.

To ensure the safe use of the equipment and schedule regular maintenance.

Ensuring high standards of housekeeping, quality, hygiene & safety procedures.

To check production output according to the specifications.

To analyze and provide solutions to the production-related problem.

To manage warehousing of incoming and outgoing stocks.

Provide support in the stock-taking of raw / packaging materials.

Ensure that products are manufactured according to cGMP, HACCP standards, as well as compliance with regulatory requirement such as SFA, Muis, Kosher, etc

Other duties assigned as & when required.

# Prefer have food hygiene knowledge.

# At least a Diploma.

# Minimum 2 years of related supervisory experience.

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: QC Technician
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $3,200 + VB
• Duration: Permanent

Key Responsibilities

• Conduct detailed reviews of plans, specifications, and blueprints to fully understand the requirements for incoming part inspections.
• Compile and maintain detailed inspection reports and performance records.
• Collaborate with engineers and suppliers to meet established quality standards.
• Handle various quality control administrative tasks.

APPLY NOW!!!

• At least NITEC in Mechanical, Precision Engineering, or relevant studies.
• Minimum of 3 years of relevant experience.
• Strong proficiency in Microsoft Office.
• In-depth knowledge of quality control standards.
• Hands-on experience in the quality control field is preferred.
• Proficient in operating CMM (Coordinate Measuring Machine) and Smart Scope.
• Ability to interpret technical drawings.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67594 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: Maintenance Technician
• Working Location: Tuas (Transport Provided)
• Working Hours: Monday – Friday (8.15 AM to 5 PM)
• Salary Package: Basic Salary up to $2,200 + OT + AWS + Bonus + Transport Allowance + Attendance Allowance
• Duration: Permanent

Key Responsibilities

• Assist the Maintenance Engineer in maintaining plant machinery and facilities.
• Perform scheduled and preventive maintenance tasks.
• Respond to machinery breakdowns and assist in repair work.
• Carry out welding and fabrication duties.
• Install equipment and fixtures.
• Support new projects, electrical wiring, and engineering tasks.
• Update and maintain records of plant equipment and machinery.
• Manage the spare parts inventory.
• Prepare monthly reports on utility usage.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum O-level/NITEC qualifications
• Candidates who have welding certificates/experience are an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67713 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

1. JOB DESCRIPTION

Job Title

Aircon Maintenance Supervisor

Occupation

Air-Con Technical Manager

Job Description & Requirements

1) Able to build a team to do general servicing of air-con for home and small office.

2) Able to troubleshoot air-con compressor problem for home , small office and building system

3) 3-5 years experience

4) Class 3 driving license with min 2 years experience

5) Required to work night shift

6) Salary S$3800/ to S$4500/ with performance and other bonus

7) Interested parties pls contact kenny at 9781 3668

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechatronic Technician
• Working Location: Loyang Way
• Working Hours: 5 days, Monday to Friday (8.30 am-5.30 pm)
• Salary Package: Basic Salary up to $3,000 +OT pay + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Perform regular maintenance on mechatronic systems to ensure optimal performance.
• Diagnose and repair mechanical, electrical, and software malfunctions in mechatronic systems.
• Conduct routine inspections and preventive maintenance on machines and equipment.
• Ensure that all systems are correctly configured for optimal operation.
• Collaborate with engineers to integrate new technologies into existing systems.
• Provide technical support to operations and production teams.
• Troubleshoot issues related to mechatronic systems and provide timely solutions.
• Develop and update technical documentation, including maintenance logs and operational manuals.
• Ensure all mechatronic systems meet the required safety and quality standards.
• Implement quality control measures to improve the reliability and efficiency of systems.

APPLY NOW!!!

• A minimum qualification of Diploma or Degree in Mechatronics, Electronics, Mechanical Engineering, or a related field.
• Minimum 2 years of experience in mechatronics or related field.
• Strong understanding of mechanical, electrical, and electronic principles.
• Excellent problem-solving abilities and attention to detail.
• Strong communication skills, both verbal and written.
• Ability to read and interpret technical drawings and schematics.
• Proficiency in programming languages related to mechatronics (e.g., PLC, C++).
• Able to travel for servicing when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67127 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

Industry/Organization: F&B Production

Position Title: Production Engineering Technician

Working Location: Bedok

Working Hours: 5 days (Mon – Fri, 9.00 am – 6.30 pm)

Salary Package: Up to $3,300

Duration: Full Time

Key Responsibilities

To lead and manage team of production staff to achieve production quantity.

To identify issues in efficiency and suggest improvement.

To ensure the safe use of the equipment and schedule regular maintenance.

Ensuring high standards of housekeeping, quality, hygiene & safety procedures.

To check production output according to the specifications.

To analyze and provide solutions to the production-related problem.

To manage warehousing of incoming and outgoing stocks.

Provide support in the stock-taking of raw / packaging materials.

Ensure that products are manufactured according to cGMP, HACCP standards, as well as compliance with regulatory requirement such as SFA, Muis, Kosher, etc

Other duties assigned as & when required.

# Prefer have food hygiene knowledge.

# At least a Diploma.

# Minimum 2 years of related supervisory experience.

The Lead Mechanical Technician Topsides performs mechanical completion, pre-commissioning and
commissioning activities.

In order to complete Mechanical Completion, Pre-commissioning and Commissioning activities in accordance with the project completion plan and schedule, he should:

• Understand his roles and responsibilities and to be compliant with.
• Understand the project completion execution plan from the Discipline Lead Technician.
• Understand Notification of Energization (NOE) Flow Chart.
• Understand System Drawings and Walk Down procedure;
• Complete a Daily Report to ensure clear visibility to the Discipline Lead Technician.
• Attend the Daily Discipline Tool Box Talk to understand the daily activities;
• Perform the Mechanical Completion Activities (‘A’ Scope ITRs) in close cooperation with the construction team in compliance with the project drawings and specifications.
• Perform the Pre-commissioning Activities (‘B’ Scope ITRs) in compliance with the vendor
  documentations and specifications.
• Support the Operation Test Procedure (OTP) under the supervision of the discipline Lead
  Technician.
• Utilize specific tools and test equipment for the system commissioning in safety and with
  quality.
• Assist field service vendor to conduct the system commissioning
• Comply with the HSSE requirements of the site. Ensure the safety and security of project personnel.
• Assess job related hazards during the development of safe working procedures and pursue
  opportunities to eliminate exposure.
• Attend the specified HSSE training and ensure direct reports are trained.
• Know how HSSE risks are managed and ensure that the HSSE controls for the activities/tasks are communicated. Supervise the safe execution of work and the implementation of controls.
• Communicate and practice in emergency response.
• Engage with team members and contractor staff on HSSE in meetings, pre-job briefings, during toolbox talks and attend key HSSE events. Communicate a consistent safety message, resolve unsafe situations, engage and intervene on unsafe behaviour and reward good safety behaviour.
• Liaise with HSSE department for support.

Requirement:

• Technical College diploma in Mechanical discipline or equivalent
• A minimum of 15 years’ construction or commissioning experiences in Oil & Gas Industry;
  especially for Offshore products and systems.
• Preferably gained within FPSO experience will be a strong selection criteria.
• Completions Tools (ECOM) including documentations
• PTW and JSA

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: 4 days, 12 hours Rotating Shift (2-day shifts + 2-night shift)
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Perform preventive maintenance and corrective repairs on packaging and conveying equipment, including vehicles, chassis, forklifts, and industrial facilities.
• Troubleshoot and resolve electrical, mechanical, pneumatic, and hydraulic system faults.
• Identify technical issues through inspections and tests; analyze and diagnose malfunctions.
• Use various tools and equipment for diagnosis and repair; order and replace parts, working with suppliers.
• Maintain accurate repair records and parts inventory; communicate findings and repair options.
• Attend to breakdowns, reduce equipment downtime, and enhance performance through quality maintenance.
• Ensure compliance with Health & Safety policies, maintain workplace housekeeping, and follow safe work procedures.

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Must be prepared to work on a 12-hour rotating shift
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Position: Test Technican

Qualification:

ITE in Electrical & Electronics Engineering or equivalent

Job Description:

• Production testing
• To perform tuning and testing of RF PCBA and modules
• Collection and compilation of test data
• To setup test station and perform temperature cycle test
• To setup and perform environment stress test
• To perform leakage testMaintaining the operations of test stations
• To generate test report
• 5 day week @ AMK Area

Nationality: Singaporean

Maestro HR

damien lee tian hong

R1106726

16C8462

Job Description

• Industry/ Organization Type: Engineering/Manufacturing
• Position Title: Technician (PCB)
• Working Location: Kallang
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.30 pm)
• Salary Package: Basic salary up to $2,800 + OT Pay + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Repair and soldering of PCB boards.
• Conduct inspections and measurements to maintain high-quality standards.
• Assist and support fellow team members as needed.
• Meet productivity and quality goals.
• Any other ad-hoc duties.

APPLY NOW!!!

• Minimum GCE O Level/NITEC
• Experienced with PCB boards is an additional advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #66282 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641