Location: Gul Street (Jurong)

Working Hours: Mon to Fri 7.30am - 4.30pm

Salary: up to $2,800 - $3,100

√ Company transport provided

√ AL from 14 days

√ AWS

Job Description:

• Performs routine laboratory tests and analysis on raw materials, in-process materials and finished goods to ensure quality standards are met.
• Assists in carrying out quality checks on new raw materials and newly developed products.
• Carries out new method validation and analysis on materials to investigate customer complaints.
• Replenish and track laboratory samples, consumables and reagent inventory.
• Conduct all assigned work in compliance with the company safety and quality requirements.

Requirement:

• At least 2 years of working experience in a laboratory.
• Prior experience in operating and maintaining HPLC, UV spectrophotometer and titrimetric analysis.
• Diploma in Applied Chemistry / Diploma in Food Science & Technology / Diploma in Pharmaceutical Science / Diploma in Chemical & Pharmaceutical Technology.

Evervet Veterinary Clinic would like to expand our family of paraprofessionals and veterinarians!

We are a team of passionate individuals who strive to provide excellent care and service to our patients and clients.

Our clinic offers both general consultations and a wide range of surgeries. Do you think you have what it takes to be an outstanding Vet nurse?

As a Veterinary Nurse/ Technician, you would be expected to carry out the following duties including but not limited to:

• Handling and restraint of animals
• Surgical preparation and anesthetic monitoring
• Assist with surgical and dental procedures
• Some reception duties
• Triaging of emergency cases
• Care of hospitalized patients
• In-house laboratory/ diagnostic procedures
• General housekeeping

The ideal candidate should possess the following:

• 'O' levels certificate or higher
• Relevant qualifications in veterinary care would be an advantage
• Minimum 1 year experience as a Vet Nurse

You will be required to work up to 5 days per week (inclusive of one weekend).

At Evervet, we are strong advocates for staff welfare. We encourage continuing education so that you may continue to improve your skills.

Do note that only shortlisted candidates will be notified.

Job Type: Full-time

Salary: From $2300.00 (remuneration commensurate with experience)

Please submit your CV to [email protected]

The position is responsible for daily engineering sections to support the hotel operations.

Primary Responsibilities

Daily Engineering Operations

• To cut, fabricate and install wooden and other structures according to specifications.
• Reads blueprints, drawings and sketches to fully grasp requirement.
• Takes measurements and calculate the size and amount of material needed.
• Cut, shape and smooth lumber and other materials (e.g. fiberglass) according to measurements.
• Builds window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items.
• Lays out floorings, roofing or drywalls ensuring they are leveled and compatible.
• Carves and assembles furniture, cabinets, shelves and other items and install them where designated.
• Builds scaffolding and other construction structures.
• Rectifies equipment and facilities breakdown as required.
• Responds to requests relating to carpentry issues from hotel patrons in a timely and efficient manner.
• Replaces faulty components / parts as required.

Preventive Maintenance

• Rectifies / Repairs damaged furniture to the highest quality level and in a timely manner.
• Rectifies / Repairs defective building surfaces to the highest quality level and in a timely manner.

Involvement In Wider Job Function Actions / Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion, Women at Accor Generation, etc.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Proven experience as carpenter
• Hands-on experience in working with carpentry materials
• Excellent understanding of carpentry techniques and methods of installation and construction
• Proficient in using electrical and manual equipment and measurement tools (powered saws, hammers, rulers etc.)
• Ability to read technical documents and drawings
• Willingness to follow safety guidelines at all times
• Good knowledge of English
• Good understanding of basic math
• Good physical condition and endurance
• Related or relevant carpentry training/certification preferred.

Competencies

• Detailed Engineering knowledge.
• Planning ahead.
• Great communicator.
• Ability to communicate with all levels of colleagues.
• Service oriented professionalism.
• Ability to contribute in a team environment.
• Multicultural awareness to work with colleagues from diverse cultures.
• Responsive to change within the team.
• Sense of urgency and able to set priorities.

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Job Requirement

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

· At least 10 years experience

· Willing to work on holidays / work on shifts / change of shift

· Able to stand/work for long hours

• Review samples, drawings or instructions to understand specifications of output
• Plan the sequence of necessary actions for the completion of a job
• Take measurements and mark material for cutting or shaping
• Select appropriate machines (e.g. lathes) and position or load material for a job
• Determine and program size of batches, speed of machine etc.
• Monitor machine while working to adjust the feed, maintain temperature and identify issues
• Check output to ensure consistency with specifications and discard defects
• Keep records of approved and defective units or final products
• Perform routine machine maintenance and repair minor damages

Working Hours : 8.00am to 5.50pm (Mondays to Fridays); with 1-hour lunch break.

Working Location : Company transportation provided at Clementi

Job responsibilities:

• Perform physical and chemical analysis of finished products
• Perform testing on in-coming, in-process and finished product
• Maintain good laboratory practices.
• Recording data
• General laboratory maintenance and disposal.
• Assist in other duties as and when assigned

Interested candidates, do submit your resume to : [email protected]
Telegram me at @jocelynchan

Jocelyn Chan Recruit Express Pte Ltd (Healthcare & Lifescience) Company EA Licence number : 99C4599 Personnel EA License: R1331820 [email protected]

Working Hours: 8.00am to 5.50pm (Mondays to Fridays); with 1-hour lunch break.

Working Location: Pandan Road (Company transportation provided at Clementi)

Job responsibilities:

• Perform physical and chemical analysis of finished products
• Perform testing on in-coming, in-process and finished product
• Maintain good laboratory practices.
• Recording data
• General laboratory maintenance and disposal.
• Assist in other duties as and when assigned

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc
Recruiter (R23113787)
EA License No. 99C4599

Duration: 3 Months

Monday to Friday Office hours

Location: Tuas

Salary: $12 per hour

Job Description:

• Assembly of parts and also heatstaking of inserts

• Other ad hoc duties

Requirement

• Min. A / NITEC / Diploma in Engineering / Biomedical Engineering

• N experience needed as training will be provided

If interested, please email your resume to [email protected]

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Trans-Euro provides manpower, logistical, operational, and consultancy services to companies in the process sector, specifically waste management companies.

Services we provide include but not limited to:

• Rental and leasing of commercial vehicles with drivers (prime mover, hook lorry, vacuum trucks, lorries, and box lorries)
• Repair, maintenance, and rental of heavy machinery and iso-tanks

What we offer

In order to keep pace with its growth and expansion, the company is looking for highly motivated and passionate individuals to join the team.

Your Key Responsibilities include:

• Attending to job site troubleshooting repairs and maintenance of all company machinery
• Repair, maintain and overhaul equipment components
• Read and comprehend instructions provided by manufacturers
• Maintain a high standard of housekeeping and follow all safety rules and regulations
• Able to work independently with minimal supervision
• Any other ad-hoc duties as assigned.

Qualifications and Job Requirements:

• Experienced in handling and repairing scissors lift and forklifts
• Have Class 3 Driving License

Job Description:

• Perform welding repair and assembly of aircraft components with gas tungsten arc welding/ tungsten inert gas processes
• Use measuring instruments such as gauge blocks, height gauges, dial indicators and callipers to examine components
• Perform various jobs such as cutting, grinding, sheet metal and assembly works with hand or power tools which include portable riveting guns, squeezers, abrasive tools and torque wrenches
• Meet repair production schedule and delivery requirements
• Suggest new tooling design and modification to existing tooling when required
• Participate in cost control initiatives and continuous improvement projects/ events
• Perform other duties as assigned

Requirements:

• NITEC or equivalent qualification
• Minimum 3 years of working experience in welding aircraft alloy material or in tungsten inert gas/ gas tungsten arc welding. On the job training will be provided for candidates who does not possess relevant working experience.
• Able to read and follow Repair/OEM specifications
• Able to perform rotating shift work, and support overtime, if required
• Open to cross-training and multi-tasking

Responsibilties:

• Responsible for set up and operate CNC & NC Machine according to production schedule and meet all specification requirement
• Perform simple trouble shooting, basic daily machine maintenance and maintaining 6S housekeeping
• Read, interpret & execute various machining works using CNC and NC vertical/ horizontal lathe involving milling, turning and grinding per the engine manual requirements
• Meet tight and demanding repair production schedule & delivery requirements
• Suggest new tooling design & modification to existing tooling when required
• Participate in cost control initiatives & continuous improvement projects/ events
• Perform other duties as assigned

Requirement:

• Minimum NITEC or equivalent qualification
• Minimum 3 years of working experience in aviation repair involving CNC & conventional machining (milling, turning and grinding)
• Able to work rotating shifts
• Proactive to cross-training and multi-tasking
• On the job training will be provided

Responsibilities:

• Assembly, testing, packaging and delivery of final products, including basic electronic troubleshooting, maintenance and repairs.
• Perform soldering of fine-pitch SMT components, handling general test and measuring equipment.
• Support product development in assembly of prototype boards, testing and troubleshooting, with supervision from engineers.
• Support field maintenance work.
• Attend to 24/7 maintenance if required.
• Any other duties as assigned by Supervisor / Management.

Requirements:

• Minimum ITE/NITEC in Electrical / Electronic / Computer Engineering. Diploma holders will be considered for Senior Technician positions.
• Working knowledge of IPC-A-610 Acceptability of Electronic Assemblies will be an added advantage.
• Team player & fast learner.
• Preferably a few years of relevant experiences in electronics industry.

Job Summary:

• Salary: UP TO $2,700
• 8 hours per day
• Location: East (Door to door transport provided)
• Variable Bonus Up 4 months + Laundry Allowance + Shift Allowance
• Training provided

Job Responsibilities:

• Perform troubleshooting, repair, overhaul of aircraft engines
• Dismantle aircraft engines
• Testing and maintenance of engine equipment
• Perform simple operational checks on aircraft system

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Ng Der Min (Alex)

Registration Number: R23111898

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Looking to venture into the Aerospace industry? NO PRIOR EXPERIENCE REQUIRED

We are the world’s largest airframe MRO solution provider with over 45 years of experience in aviation and are backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe.

We are looking for individuals who are passionate about Aerospace MRO to join us today!

What you can look forward to:

• Structured training program (classroom + OJT)
• Competitive remuneration package
• Career growth and development

Roles & Responsibilities after completion of Aircraft Maintenance Technician (ACMT) training:

• Perform preventive maintenance checks on aircraft systems, structural and/or electrical/ electronic components
• Fabricate and perform approved minor repairs on airframe sheet metal parts, electrical wirings and/or subsystem assemblies’ components
• Perform simple operational checks on aircraft system and/ or component using appropriate test sets / tools to ensure serviceability and airworthy in accordance with national regulatory, company procedures and safety requirements

Entry Requirements:

• Minimum 3 GCE "O“/ “N” Level passes OR
• NITEC/Higher NITEC in any discipline OR
• Diploma in any discipline
• Passionate in working on aircraft and technical work
• Singaporeans only

Starting salary will commensurate with education background ranging from $2000 to $2600.

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• 
  
• Provide overall supervision of production activities.
• Plan, organize and lead a team of production workers to achieve production target and output, cycle time, and yield.
• Improvement in maintaining product quality and productivity. Provide a guideline to check on processes thereby assuring that work is done by the operators.
• Monitor the daily efficiency status of the line.
• Ensure good housekeeping and safety at the workplace.
• Oversee hiring and training of food production personnel
• Perform other duties as assigned.

Anticimex is the modern pest control company. Through prevention, new technology and sustainable solutions, we meet the new demands for healthy environments, for both individuals and businesses.

Due to growth, we’re on the hunt for a highly ambitious Service Technician qualified in General Pest to join our team. As part of your role, you will be responsible for the below duties:

Job Responsibilities:

· To report to clients and conduct pest inspections and services

· Determining the kind of treatment required to eliminate a particular type of pest

· Identify pest infestation & carry out appropriate treatments for complaint area

· Applying suitable pesticides to infested areas by following the label instructions and complying with safety procedures

· Prepare daily reports, including records of equipment usage, work schedules and pest control operations performed

· To maintain operation readiness for equipment and inventory

· Supervise workers/ technicians for work schedules and responding to customers requests for various pest control services.

What we’re looking for:

Service Technician

· Experience in pest control industry

· Valid Class 3 License, NEA Technician/Worker License

· Positive and customer focused attitude

Benefits:

• Basic Salary $3,500 and above

• Company vehicle + phone provided

• Additional incentives

• Commission on upsell opportunities you identify while at client sites

• Opportunity for career progression, training, and development

If you would like to know more, apply today as we’d love to hear from you!

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

About Us

NUS, Singapore’s flagship university, and SIA, Singapore’s flagship carrier, jointly established a 5-year SIA-NUS Digital Aviation Corporate Laboratory (Corp Lab) to create and commercialise innovative technologies that could accelerate the digital transformation of Singapore’s aviation sector and redefine the air travel experience.

To emerge ahead in today’s digital transformation era, SIA and NUS will jointly target Revenue Management & Dynamic Pricing (for smart data-driven optimization), Transforming Competency and Skill Development (for intelligent and personalised pilot and cabin crew training), Employee Wellness (for data-driven and scientifically-backed improvements to workforce safety, performance and productivity), and Passenger Comfort, Sleep and Cabin Service (for next-generation product offerings and unparalleled customer service within the cabin).

The Role

In this position, you will be working on backend components to support existing technology-based platforms that collect, analyse and act on data related to in-flight employee fatigue. As a member of our team, you will work closely with software engineers, data analysts, project managers and external partners to deploy back-facing software systems for use in existing platforms towards managing employee fatigue. Your expertise will be instrumental in developing back-facing components such as system modelling and debugging, software architecture, system maintenance, endpoint configurations, information security and database setup.

Your roles will include:

• Collaborate with the design team, other software engineers and product managers to design, build, enhance, and test new features
• Write clean and maintainable code that is properly tested and reviewed
• Understand the product thoroughly. Analyse, design and develop functionalities based on product requirements
• Design and build scalable and reliable server services
• Work with front-end engineers to provide API endpoints
• Liaison with external technical representatives to establish and test infrastructure architecture and service
• Develop large and distributed systems for storage, server, website, and mobile app-level frameworks
• Participate in regular development meetings and client engagement events

Requirements

• Master’s degree in Computer Science, Electrical Engineering, and Computer Engineering.
• Knowledge of at least one of server-side languages (Java, .NET, Python, Docker, Flask)
• Good knowledge of at least one of these languages, Python, Go, Java, C/C++.
• Good experience with API design and implementation (REST, RESTful API, RPC, GraphQL).
• Experience with system performance evaluation, analysis, and optimization.
• Experience with test-driven development.
• Experience with server architectures and operating systems. Knowledge with AWS is a must.
• Candidate should be organized, meticulous, independent and has good communications skills
• Candidate should be comfortable working on multiple projects and in a dynamic environment
• Candidate should be able to work independently as well as be a team player

Your Role

We are looking for an experienced PLC Technician/ Automation Technician / SCADA Technician for automation technical maintenance and housekeeping.

What Will You Do

• For servicing and maintenance of the company automated equipment
• To carry out maintenance of the electrical and mechanical equipment operation
• To provide technical support & housekeeping to meet production schedule
• Any other duties assigned by manager.

What Do We Want

• Min Nitec/ Diploma in Automation/ Electrical / Mechanical Engineering or equivalent.
• At least 2-3 years’ experience in Warehouse Automation maintenance and Mechatronic relevant experience.
• Have knowledge of automation systems, including PLC, SCADA, robotic systems and HMI (Human-Machine Interfaces).
• Proficient in reading and interpreting electrical and mechanical schematics, diagrams, and technical documentation

What Will You Get In Return

You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$3200 + attractive perks.

What You Need to do Now

Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note: Only shortlisted candidate will be notified via email for an interview invitation

Our client is an established company specialising in Biomedical and Manufacturing. They are expanding and growing at a fast pace and now looking to hire a Chemical Process Technician to support the growth. They are located in the West – easily accessible.

Duties of Chemical Process Technician:

• Verification of necessary raw materials for the blending process.
• Ensuring cleanliness of tanks and the surrounding area.
• Collaboration with the team to execute inline cleaning in place and steam in place.
• Documentation for Raw Material Receipt (RMR), including bubble point tests and chemical weighing.
• Overseeing the regeneration of the RO water system.

Requirements:

• Minimum Diploma/Nitec in Chemical or Engineering related discipline
• Comfortable to perform rotating shifts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

Responsibilities

• Track, monitor and analyze utilities consumption and plan for facilities capacity upsize with respect with scenario ramp.
• Carry out system capacity study to meet Manufacturing requirement
• Able to evaluate and supervise Mechanical modification or enhancement projects.
• Supervise improvement/upgrading/new projects for mechanical system and able to work with and lead respective contractors to complete mechanical jobs effectively to ensure maximum uptime and reliability of the Mechanical systems.
• Able to work with cross functional team effectively in driving projects or troubleshooting.
• Review work procedures and highlight activities which may cause interruptions.
• Provide technical support to Operations and Maintenance team in solving complex mechanical and water systems issues.
• Perform troubleshooting and rectification work independently, applying basic theories and principles to prevent repeat and interruptions.
• Basic understanding of relevant building and mechanical regulatory standards/codes.
• Be aware of and perform all work in accordance with company safety guidelines. Good communication and collaboration within Facilities Sections and with all customers throughout the organization

Requirements

• Understanding of Mechanical system design in Semiconductor industry including its associated equipment’s working principles (e.g. HVAC, exhaust systems, scrubbers, process cooling water, chillers, boilers, cooling towers, pumps, fans, etc) is preferred.
• Diploma in Mechanical Engineering or any related field of study
• Minimum 3 year experience in Mechanical Engineering with a focus on design and construction of Semiconductor Mechanical Systems
• Ability to prioritize and schedule workload and work on multiple tasks concurrently
• Good organizational skills and willing to learn
• Excellent communication skills and good team working skills
• Self-motivated worker
• Familiarity with semiconductor manufacturing and facilities systems
• Strong ability in English speaking and writing

Info can be share ATM: -

• Basic $3000 - $4000 + AWS + (Laundry $30)
• UBI area
• 5.5 Days (Mon-Fri 8:30am to 5:30pm) , (Saturday 8:30am to 12:30pm)

Your Responsibilities: -

• Report technical issues and create reports for the Principal
• Identify and report common technical problems to improve quality
• Improve customer service and repair quality through effective coordination and frontline management
• Manage submissions for new models/recall campaigns and compile monthly results
• Update warranty records for recall campaigns
• Support daily workshop operations, including diagnostics and major repairs
• Conduct on-site repairs and recall campaigns at dealer workshops when needed
• Provide product knowledge and servicing information to customers and dealers
• Mentor fellow technicians in diagnostic and technical skills
• Perform test rides and quality control after completing jobs.

You will need: -

• Possess a valid Class 2B driving license
• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent
• Preferably with 2 years of hands-on experience in similar industry.

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Entry level / Junior welcome apply

5 days work week / Permanent Role / Company transport provided

Full training provided !!

Job Responsibilities :
* Perform quality control analysis for in-coming, intermediate and final products
* Carry out calibration of equipment and ensure in working condition
* Ensure activities in the laboratory are safe
* Maintain up to date analysis reports

Job Requirements :
* Nitec / Diploma in Chemical Process Technology / Chemistry or equivalent
* Preferably with hand on experience in sampling, preparation and analysis for
liquid samples
* Prefer experience in handling laboratory analytical
equipment

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

1. Company transport: Boon Lay
2. Transport reimbursement: (to-forth)
3. 1st Shift:7.30am-4.15pm;2nd Shift:1.45pm-10.30pm;3rd Shift:11.15pm-8am
4. 2nd Shift - $5, 3rd Shift -$15 (Weekly Rotation)

Responsibilities:

• Perform measurement equipment.
• Understand and able to interpret specifications
• Applying Standard inspection procedures
• Preparing inspection plan & instruction manual
• Filing of inspection report and COC
• Reporting of non-conformance
• Follow safety regulations & perform other duties as assigned

Requirements:

• ITE/Diploma in Mechanical/Precision Engineering
• Min 2 years experience on inspection of precision parts
• Knowledge in Vernier Caliper, Micrometer, Trimos, Profile Projector, Scope
• Able to perform rotating shift work

Interested applicants, send in your updated resume by clicking “Apply Now”

Lin Weikang

Registration Number: R21102570

Workstone Pte Ltd

EA License Number: 19C9998

Responsibilities:

• Test and troubleshoot instruments, components, and assemblies, using circuit testers, oscilloscopes, or voltmeters
• Test electrical equipment or systems to ensure proper functioning
• Carry out schedule servicing, and troubleshooting and defect rectification on military aircrafts
• Inspect parts from suppliers conforming to stated specifications
• Keep records of maintenance and repair work. Maintain repair or maintenance records
• Order supplies, equipment, materials and parts for repairs and general maintenance
• Keep detailed records of the inspections performed, repairs finished, maintenance procedures and ordered parts
• Support daily production and deployable to outstation project works when necessary
• Complete all tasks in the allotted time frame and to the quality standards of our company
• Promote safety within the workplace by monitoring others and yourself to guarantee all tasks are performed within the safety manual guidelines, and communicate with other mechanics and supervisors to coordinate repairs and keep apprised of safety concerns

Requirement:

• Min NITEC/Higher NITEC/Diploma in Aerospace Avionics/Aerospace Engineering or equivalent OR
• Min NITEC/Higher NITEC/Diploma in Engineering with Aerospace work experience
• Able to work rotating shift
• Singaporeans only