Be part of a team in creating state-of-the-art Secure Low Power SoC ARM-based SoC/MCU for the Low-End , Mid and High-End performance MCU product line in a IC Design Environment.

Responsible:

• Engage design team and architects to strategies DFT Test plan for SoC top level
• Create DFT test modes, scan architecture, clocking and reset architecture.
• Plan Pin-Muxing and Pad and Boundary scan (BSDL) generation
• Execute JTAG TAP network generation and verification.
• Quality check with Spyglass analysis for scan using spyglass tool
• Execute Scan insertion using DC / Tessent tools
• Deploy Scan constraints development for Atspeed, shift and slow capture mode.
• Generate ATPG pattern generation using synopsys Tetramax tools
• Analyze and report on test coverage metrics to ensure comprehensive testing of designs.
• Implement improvements to enhance test coverage and efficiency.
• Verify No-timing and SDF simulation of ATPG patterns using VCS and NCSim tools
• Implement MBIST MBIST repair and verification using Mentor Graphic Tessent tools.
• Boundary scan verification
• Generate STIL test patterns for tester
• Silicon bring-up and failure debug

Requirements:

• Requires BSc/MSc or PhD in electrical and electronic or Computer engineering
• Requires > 5 years or more of experience in DFT at IP and SoC top level. Proficient at using DC ,tetramax and MG tessent DFT tools
• Tape-out at least 5 chips and tested to pass on tester.
• Requires strong understanding of state of the DFT methodology , flat and hierarchical implement of DFT from IP to SoC top.
• Capable of understanding UPF to enable multiple power domain verification
• Capable of leading, review and guiding younger DFT engineers in their daily tasks
• Able to work in a team with a strong drive to excel
• Able to work independently on a given assignment and work hard to finish on time
• Good written and communication skills

Job Description

• Responsible for processing of customer enquiries through emails and phone calls & follow through till completion.
• Issue quotations based on customers’ requirements and follow up on quotations.
• Co-ordinate between the customers and technical dept for the job to be performed and status of the job.
• To liase with vendors, suppliers and sub-contractors for quotations and related documents.
• Preparing for certain spare parts for collection/delivery.
• Generate Invoice, SOA and other related documents and email to customers.
• Do filing for all service-related documents.
• Checking and replying email daily.
• Updating of spare parts inventory and invoices into system.
• Provide administrative support duties and any other adhoc duties as assigned.

Requirements

• Minimum GCE ‘N/O’ level.
• Computer literacy in Microsoft office.
• Able to speak and write English and liase with Mandarin-speaking customers.
• Minimum 1 - 2 years of experience in similar capacity.
• Meticulous and service-oriented
• 5 days work week/14 days annual leave
• Work Location: Toa Payoh North- 5 mins walking distance to Braddell MRT station.

Our Team

Mighty Jaxx is the leading integrated future culture platform in Southeast Asia today. With a mission to supercharge future culture phygitally, Mighty Jaxx’s integrated platform will empower future pop culture brands with an end-to-end supply chain of digital and phygital collectibles, including artist development and incubation, proprietary IP operation and providing global consumers access to new D2C experiences.

Mighty Jaxx partners with the greatest creative talents in the world, as well as top global brands such as Netflix, Formula 1, Hasbro, Toei Animation, Cartoon Network, Nickelodeon, Warner Brothers, Adidas and many more to ship millions of phygital collectibles to over 90 countries worldwide.

We are proud to be an equal opportunity employer with a diverse, inclusive work environment and encourage our employees to bring their authentic, fun-loving, and high-energy selves to the workplace.

Your Role

Mighty Jaxx is looking for a Software Engineer Intern to join the Engineering team in an exciting website revamp project.

We are looking for a full-time intern, who is able to join us from May 2024 onwards, ideally for a period of minimum of 3 months.

Responsibilities

• Collaborate with product managers, tech leads, and individual contributors to support application engineering teams
• Take ownership of assigned tasks and features
• Contribute to technical discussions
• Participate in the development of development tasks under the guidance of senior developers
• Learn from and be mentored by senior engineers, and actively seek guidance to progress in your career goals
• Contribute to the tracking of key metrics for quality and team performance, and help drive continuous improvement
• Communicate project status, challenges, and opportunities to the team lead

Requirements

• Currently pursuing Computer Science, Software Engineering, or a related field of study
• Strong understanding of full-stack development concepts and experience in developing web applications
• Solid foundation in software development with at least one programming language (e.g., JS, TS, React and or NextJS)
• Familiarity with backend development using Node.js
• Knowledge of software engineering principles and the ability to apply them in practical scenarios
• Good problem-solving skills and the ability to articulate technical concepts clearly
• Experience building REST APIs
• Understanding of test-driven development principles and experience with unit testing frameworks is advantageous

To apply, please send an updated copy of your resume to [email protected]

While we value all submissions, we regret that only shortlisted candidates will be contacted by our People team.

I.EM Engineering Consultants is made up of a team of dedicated professionals who works closely with other design and construction professionals to provide a truly integrated, consistently innovative & cost-effective customized solutions to meet the changing needs of clients.

The company is conveniently located near Kovan MRT station and amenities and provides a conducive work environment that supports work life balance. The Company works hard to nurture a collaborative team, a culture that supports engineering innovation, teamwork and a team committed to deliver their best to the client.

Due to expansion plans, we are currently hiring senior engineers to support our Healthcare, Laboratory, Commercial & industrial projects. The person would be someone who has a strong technical background and aspires to develop his/her management skills.

Company Overview

Well establish boutique consultancy firm that handles new build industrial development, A&A works for hospital OTs, patient wards and laboratory as well as office and commercial fit up. Our office also carry out technical and due diligence audit as well as authorities submission to SCDF, PUB, SP Powergrid, NEA and IDA etc.

We are a group of dedicated engineers and designer who take pride in our work and looking for likeminded people to join us.

Why Join Us

Wide exposure and hands on project experience for professional and career progression.

Conducive working environment and work life balance.

Comprehensive in house and external technical training.

3 Selling Points

Working with A Team of Dedicated Professional with High Agility

Comprehensive In House Coaching & External Technical Training

Professional & Career Development

Benefits –Medical, Dental, Health Insurance, Annual Trip

ASSOCIATE DIRECTOR (ELECTRICAL)

Job Details

Position Title : Associate Director (Elect)

Employment Type : Full Time/Permanent

Position Level : Senior manager

Job Specialization : Engineering - (Elect)

Monthly Salary : $8500 - $10,500

Job Requirements

Education Level : Recognised Degree in Electrical Engineering with PEB Singapore

Qualification : Professional Engineer (Electrical)

Years of experience : Min. 10 years with consultancy firm

Job Description

Job Description:

· Lead and drive a team of engineers in Electrical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion

· Manage the projects to ensure quality work, delivery of projects on time and within budget

· Assume the role of PIC/PM and sign off as the registered QP/PE for the company for statutory submissions/certificates

· Assist in formulating, implementing and achieving the Company’s strategies, goals

· Liaise with clients and ensure client’s satisfaction is maintained

· Source and secure new business opportunities/ projects

· Provide leadership, guidance and training and improve the technical knowledge of the supporting staff

· Standardize technical standards and performance specification for the Company

Requirements:

· Recognised Degree in Electrical Engineering with PEB Singapore

· Registered Professional Engineer Singapore will be preferred

· Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion

· Excellent understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA/SP Powergrid)

· Strong interpersonal and communication skills

· Demonstrate ability to motivate and engage multi-disciplinary team in complex/mega projects to achieve results for the clients

I.EM Engineering Consultants is made up of a team of dedicated professionals who works closely with other design and construction professionals to provide a truly integrated, consistently innovative & cost-effective customized solutions to meet the changing needs of clients.

The company is conveniently located near Kovan MRT station and amenities and provides a conducive work environment that supports work life balance. The Company works hard to nurture a collaborative team, a culture that supports engineering innovation, teamwork and a team committed to deliver their best to the client.

Due to expansion plans, we are currently hiring senior engineers to support our Healthcare, Laboratory, Commercial & industrial projects. The person would be someone who has a strong technical background and aspires to develop his/her management skills.

Company Overview

Well establish boutique consultancy firm that handles new build industrial development, A&A works for hospital OTs, patient wards and laboratory as well as office and commercial fit up. Our office also carry out technical and due diligence audit as well as authorities submission to SCDF, PUB, SP Powergrid, NEA and IDA etc.

We are a group of dedicated engineers and designer who take pride in our work and looking for likeminded people to join us.

Why Join Us

Wide exposure and hands on project experience for professional and career progression.

Conducive working environment and work life balance.

Comprehensive in house and external technical training.

3 Selling Points

Working with A Team of Dedicated Professional with High Agility

Comprehensive In House Coaching & External Technical Training

Professional & Career Development

Benefits –Medical, Dental, Health Insurance, Annual Trip

Job Details

Position Title : Electrical Engineer

Employment Type : Full Time

Position Level : Mid Level

Job Specialization : Engineering – Electrical Consultant

Monthly Salary : $4500 - $7000

Job Requirements

Education Level : Bachelor Degree

Field of Studies : Engineering Electrical

Yrs of experience : Min. 3 years

Main Role and Responsibilities

Planning and Design of Electrical engineering works for building services projects to deliver buildable design within a timely manner, and economical service to meet client’s requirement. Incumbent must influence across services without formal authority and manage the success of projects.

Key Responsibilities

• Design of electrical services such as sub-station, small power, lighting, security system, data cabling, public address system etc.
• Presentation of design concept report to client.
• Preparation of M&E cost estimate base on approved design scheme.
• Preparation of technical specifications and tender documentation.
• Co-ordination of M&E services within the office.
• Reviewing of shop drawings, material submissions and handle RFIs.
• Verification of Work Progress and Variation Order for progress claim.
• Liaise with main contractor, architect, authorities to ensure technical compliance and timely completion of project.
• Carry out site investigation survey and submitting of technical reports.
• Project Management from pre-development through to completion, including the following
  • Site Assessment and Inspection
  • Design development and co-ordination
  • Attend site meetings, technical meetings etc to resolve technical issues.
  • Following up with authorities on submissions, inspection and issuance of certification.

Prerequisites

• Degree in Electrical Engineering
• At least 3 years’ hands-on experience in design in an engineering consultancy firm for degree holder.
• Experience in handling full cycle of building service projects and proven track record.
• Good understanding of Singapore Code of Practice and authority submission process.
• Confident and have strong presentation & communication skills
• Able to work independently as well as in a team setting

Skills Requirement

• AutoCAD
• Microsoft office

We invite suitably qualified applicants to apply by sending their CV, outlining their work experiences, current, expected salary and contact details.

Job Responsibilities

- To prepare aircon shop drawings, section details and as-built drawings.

- To generate shop drawings for fabrication.

- To update drawing library.

- To plan all drawings to meet the stipulated deadline.

- To assist in design coordination.

- To carry out duties as and when assign by the Management.

Job Requirement

- Minimum Degree in Electrical Engineering.

- Minimum 2 years of relevant working experiences as drafter for the air-con sector.

- Proficient in AutoCAD.

- Positive working attitude.

- Meticulous and detailed in work.

- 5.5 days work week.

I.EM Engineering Consultants is made up of a team of dedicated professionals who works closely with other design and construction professionals to provide a truly integrated, consistently innovative & cost-effective customized solutions to meet the changing needs of clients.

The company is conveniently located near Kovan MRT station and amenities and provides a conducive work environment that supports work life balance. The Company works hard to nurture a collaborative team, a culture that supports engineering innovation, teamwork and a team committed to deliver their best to the client.

Due to expansion plans, we are currently hiring senior engineers to support our Healthcare, Laboratory, Commercial & industrial projects. The person would be someone who has a strong technical background and aspires to develop his/her management skills.

Company Overview

Well establish boutique consultancy firm that handles new build industrial development, A&A works for hospital OTs, patient wards and laboratory as well as office and commercial fit up. Our office also carry out technical and due diligence audit as well as authorities submission to SCDF, PUB, SP Powergrid, NEA and IDA etc.

We are a group of dedicated engineers and designer who take pride in our work and looking for likeminded people to join us.

Why Join Us

Wide exposure and hands on project experience for professional and career progression.

Conducive working environment and work life balance.

Comprehensive in house and external technical training.

3 Selling Points

Working with A Team of Dedicated Professional with High Agility

Comprehensive In House Coaching & External Technical Training

Professional & Career Development

Benefits –Medical, Dental, Health Insurance, Annual Trip

Job Details

Position Title : Mechanical Engineer

Employment Type : Full Time

Position Level : Mid Level

Job Specialization : Engineering – Mechanical/Building Services

Monthly Salary : $4500 - $7000

Job Requirements

Education Level : Bachelor Degree

Field of Studies : Engineering Mechanical

Yrs of experience : 3

Main Role and Responsibilities

Planning and Design of Mechanical engineering works for building services projects to deliver buildable design within a timely manner, and economical service to meet client’s requirement.

Key Responsibilities

• Design of mechanical services such as Air-Conditioning and Mechanical Ventilation, Fire Protection, Medical gas, Compress Air and Sanitary and Plumbing System etc.
• Presentation of design concept report to client.
• Preparation of M&E cost estimate base on approved design scheme.
• Preparation of technical specifications and tender documentation.
• Co-ordination of M&E services within the office.
• Reviewing of shop drawings, material submissions and handle RFIs.
• Verification of Work Progress and Variation Order for progress claim.
• Liaise with main contractor, architect, authorities to ensure technical compliance and timely completion of project.
• Carry out site investigation survey and submitting of technical reports.
• Project Management from pre-development through to completion, including the following
  • Site Assessment and Inspection
  • Design development and co-ordination
  • Attend site meetings, technical meetings etc to resolve technical issues.
  • Following up with authorities on submissions, inspection and issuance of certification.

Prerequisites

• Degree in Mechanical Engineering.
• At least 3 years’ hands-on experience in design in an engineering consultancy firm for diploma holder.
• Experience in handling full cycle of building service projects and proven track record with strong background in Air-Conditioning and Mechanical Ventilation Design.
• Good understanding of Singapore Code of Practice and authority submission process.
• Confident and have strong presentation & communication skills
• Able to work independently as well as in a team setting
• Fresh graduate is welcome.

Skills Requirement

• AutoCAD
• Microsoft office

We invite suitably qualified applicants to apply by sending their CV, outlining their work experiences, current, expected salary and contact details.

Madam Partum is a leading Pre-Partum and Post-Partum care specialist in Singapore. We harness the effectiveness of meridian massage (TCM Tuina) to help mothers achieve a complete & wholesome recovery.

At Madam Partum by Chien Chi Tow, we strive to provide the best customer experience to our customers.

We are looking for a Customer Service Specialist who can work towards the company goals. The ideal candidate needs to be equipped with strong organization and sales skills, with extensive product knowledge and able to provide excellent customer service in order to promote the company services and products effectively.

• Identify and able to provide personalized solution to customer’s needs.
• Attend to customer’s feedback and questions in a professional and timely manner.
• Maintain a continuous high level of customer service delivery and satisfaction.
• Goal-Sales driven , self motivated individual with the ability to focus.
• Strong administrative skills and able to handle a fast paced environment.
• Ensure proper documentation, notification, escalation, tracking and follow up of all interactions with customers.
• Liaise with other support teams as required to resolve requests/issues in a timely manner.
• Main task will include managing customer queries via whatsapp, social media and other platforms such as events/outlet.
• X factor and willing to go the extra mile to help customers.
• Savvy with all communications devices such as WhatsApp and multichannel platforms.
• Able to work on weekends and public holidays.

Job Types: Full-time, Permanent

Benefits:

• Employee discount

Schedule:

• Weekend availability

Supplemental pay types:

• 13th month salary
• Commission pay

Requires software engineering experience, in particular to equipment such as Automatic Guided Vehicle (Car Parking) systems.

Salary $3500.

Five and half (5.5) work days per week.

Fourteen (14) days annual leave.

Medical Leave.

Able to speak Mandrian will be an advantage.

Need to be able to work independently.

Responsibilities:

1. Develop and execute test plans, test cases, and test scripts to ensure the quality of HR Tech software applications.

2. Collaborate with software developers and product managers to identify software defects and ensure timely resolution.

3. Conduct functional, integration, regression, and performance testing of HR Tech software products.

4. Automate testing processes to improve efficiency and test coverage.

5. Participate in requirements and design reviews to provide feedback on potential quality issues.

6. Maintain documentation of test results and defects, and communicate test progress and results to stakeholders.

7. Stay up-to-date with industry best practices and new technologies related to software quality assurance.

8. Contribute to continuous improvement of QA processes and methodologies.

Qualifications:

1. Bachelor's degree in Computer Science, Engineering, or a related field.

2. Proven experience in software quality assurance, particularly in testing HR Tech software applications.

3. Strong knowledge of software testing methodologies, tools, and processes.

4. Experience with test automation tools such as Selenium, JUnit, TestNG, Cucumber, Jenkins, Java, Hybrid and Modular Framework and BDD Framework.

5. Familiarity with Agile methodologies and experience working in Agile development environments.

6. Excellent analytical and problem-solving skills.

7. Strong communication and collaboration skills to work effectively with cross-functional teams.

8. Ability to prioritize and manage multiple tasks in a fast-paced environment.

Salary Expected: SGD6,000/month

Position: Service Coordinator

Job Responsibilities

• Handling incoming calls, handling technician requests, Prepare Quotations for MCSTs, and handling project correspondences.

• Coordinate service appointments and dispatch technicians to client locations as needed.

• Respond promptly to customer inquiries via phone, email, or in-person, providing accurate information and assistance.

• Maintain accurate records of customer interactions, service requests, and resolution activities using our SRM system.

• Collaborate with technicians and other team members to ensure timely resolution of customer issues and concerns.

• Monitor the status of ongoing service appointments and provide regular updates to customers as needed.

• Assist with billing inquiries, invoice processing, and payment collection.

• Identify opportunities for process improvement and contribute to the development of customer service policies and procedures.

• Build and maintain positive relationships with clients, ensuring high levels of satisfaction and retention.

• Stay up-to-date on product knowledge and industry trends to effectively address customer inquiries and concerns.

• Other ad-hoc duties as assigned.

Job Requirements

• At least 2 years (s) working experience in a related field.

• Experience in handling maintenance contracts is preferred and must be computer literate.

• Possess good communication, listening, and interpersonal skills to maintain good rapport with our customers.

• Independent, resourceful with a high degree of initiative, and able to work under pressure.

• Alternate Saturday.

Job Duties

• Develop the programme schedule and timelines for performing the construction work based on resource requirements, historical trending of such projects etc. while striving for optimal resource utilization
• Incorporate robust construction methodology using innovative technology to optimize construction plans
• Highlight the opportunities and risks associated with the time related aspects of bids
• Participate in business development meetings as needed
• Monitor closely project progress and adherence to project plans in case project deviations are large
• Discuss deviations to plans internally, identify causes and develop mitigation plan; Collaborate with Commercial team and Project
• Present revised timelines and negotiate with the client on modifications and changes to timelines favorably
• Negotiate improved terms and timelines with suppliers and sub- contractors as needed
• Apply various delay and disruption analysis methods
• Provide advisory support for the substantiation of entitlement claims

Job Requirements

• Degree in Building / Civil Engineering & membership of professional association (Chartered planning, project management)
• 2 years or above in project planning management for Data Center Mechanical and Electrical Services projects
• Strong working knowledge of Primavera 6 planning software
• Knowledge of planning processes, tools etc.
• Knowledge stakeholder management, conflict resolution and risk management
• Good understanding of construction methodologies

Preventive Maintenance Technician- Troubleshoot, repair and maintain food production equipment- Execute emergency breakdown protocols- Assist in resolving downtime issues- Clean equipment and maintain equipment hygiene requirements for production use, after installation and/or repairs- Collate and coordinate maintenance work, at times need to work with contractor- Comply with cleanliness and safety regulations while setting up and maintaining food manufacturing equipment- Able to perform ad-hoc duty when require- Basic electrical and refrigerator knowledge- Prepare maintenance reports/records in relation to the work assignedRequirements- Minimum 1 Year of experience in maintenance work and engineering field, preferable in food manufacturing- “O” leave / NTC3 or NITEC in Mechanical Enginnering- Able to performance Shift- Willing to learn new skills- Positive work attitude

About The Role

This is a 12-month contract role.

Job Responsibilities

• Primary focal point within the Singapore-based Owner’s FEED (front end engineering development) team for managing interfaces, and identifying opportunities for cost and schedule improvement.

• Attend and contribute to FPSO (Floating production storage offloading) discipline reviews to advocate on behalf of overall system considerations, ensuring alignment with the integrated project development, operability reviews and regulatory requirements.

• Lead interface coordination meetings for the FPSO team in Singapore, identifying critical FPSO interface issues across engineering, procurement, operations, and construction, and bringing in discipling engineering resources when required.

• Presentation preparations and progress updates for stakeholders on FEED progress, especially around FPSO cost, weight, and schedule

• Responsible for documenting key FPSO-driven decisions in FEED, including decision quality analysis where required.

• Collecting and consolidating appropriate benchmarking data and reporting results

• Promoting the project, milestones and achievements and personnel recognition through a multi-faceted internal and external approach (posters, video, Shell articles, etc.)

• Providing ad-hoc support with project management and venture integration issues.

Job Requirements

• Masters or bachelor’s degree in Engineering (Preferably with a Chemical or Process Background) with 8+ years of related experience

• Experience in project delivery, front-end engineering, and systems/interface engineering preferred.

• Skilled on Shell project controls & tools and ability to immeditaly delivery through it. Experience in project delivery, front-end engineering, and systems/interface engineering preferred.

• Strong interpersonal skills/demonstrated ability to work within and lead multi-disciplined/multi-cultural teams.

• Demonstrated knowledge of systems engineering fundamentals, including functional requirements identification, management, verification, and validation.

• Deep understanding of Deepwater FPSO (Floating production storage offloading) and Subsea developments – with close connections to Centers of expertise in Deepwater

• Commercial acumen, demonstrated capability to interface with contractor team balancing technical and commercial requirements

• Ability to work across organizational boundaries.

• See and appreciate the big picture, and display strong communications skills (written and verbal)

• Balancing priorities and coping with a demanding workload, often against tight deadlines,

• Applying analytical abilities to decipher complex issues and distilling key messages,

• Delivering results through others,

• Effectively communicating with people at all levels of the organization, as well as creating and maintaining strong network,

• Leading without direct authority

• Be a team player, who shows humility and gives credit to others,

• Be willing to carry out administrative tasks,

• Have attention for detail

Job Description & Requirements

Job Description
1. To provide engineering support to service, project, sales department;
2. Assist Service department with Trouble-shooting of software and hardware;
3. Assist Project department with the termination, test & commissioning, trouble-shooting; software setup and training;
4. Liaise with vendor and supplier on any product issues that may arise;
5. Assist to setup and conduct product demo;
6. Co-ordination work;

Requirement
1. Higher Nitec & Diploma Graduate in Engineering;
2. With at least 1 year working experience;
3. Singaporean or PR need apply;

Responsibilities:

• Responsible for piloting new product set-up and launch which includes, but not limited to, RFQ, outlining product structure and part number creation
• Raise, oversee and maintain all engineering related documents (e.g. BOM, ECN, MDR, etc.)
• Disseminates relevant manufacturing and engineering documents and/or information to the relevant stakeholders
• Attend to any ECN/MDR changes
• Support customer and production team on technical issues
• Ensures products are correctly and promptly developed without compromising on product quality
• Monitor manufacturing progress
• Liaise with subcontractors to ensure products are manufactured according to specifications


Requirements:

• Diploma in Electronics Engineering
• At least 3 years of working experience in a semiconductor industry with strong knowledge in BOM structure, product BOM release, ECN and MDR changes
• Possess knowledge of ISO9001
• Possess knowledge of UL508A, Semi F47 and Semi S2 would be an added advantage
• Knowledge on ERP system would be an added advantage
• Resourceful and able to work independently
• Good at problem solving, negotiating and communicating

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/sub...

We regret to inform you that only shortlisted applicants would be notified.

Dynamic Human Capital Pte Ltd | EA License No.: 12C6253
Han Tze Jian | EA Personnel No.: R1658384

Field Service Engineer

We are looking for experienced full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3-5 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

New Product Introduction (NPI) Engineer on Semiconductors

Salary: Basic $3,800 - $4,200 + VB

Time: Monday - Friday (8am to 5.30pm)

Location: Eunos Techpark

Responsibilities:

• Responsible for piloting new product set-up and launch which includes, but not limited to, RFQ, outlining product structure and part number creation.
• Raise, oversee and maintain all engineering related documents (e.g. BOM, ECN, MDR, etc.).
• Disseminates relevant manufacturing and engineering documents and/or information to the relevant stakeholders.
• Attend to any ECN/MDR changes.
• Support customer and production team on technical issues.
• Ensures products are correctly and promptly developed without compromising on product quality.
• Monitor manufacturing progress.
• Liaise with subcontractors to ensure products are manufactured according to specifications.

Requirements:

• Diploma in Electronics Engineering.
• At least 3 years of working experience in a semiconductor industry with strong knowledge in BOM structure, product BOM release, ECN and MDR changes.
• Possess knowledge of ISO9001.
• Possess knowledge of UL508A, Semi F47 and Semi S2 would be an added advantage.
• Knowledge on ERP system would be an added advantage.
• Resourceful and able to work independently.
• Good at problem solving, negotiating and communicating.
• Team player.

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

We regret to inform you that only shortlisted applicants would be notified.

Dynamic Human Capital Pte Ltd | EA License No.: 12C6253

Lon Kei Hin | EA Personnel No.: R23116368

Job Description & Requirements

- Candidate must have knowledge of BIM and able to download drawings to make changes

- He or she must be able to design and perform drawings as per tender and/or site speficiation.

- Knwoledge of Aconex and usage an added advantage.

- Only with Singapore working experience is required to apply.

A. Roles and Responsibilities

1. Assist Project Manager in the Project Management, Project Planning,

coordination, and preparation of documents for submission.

2. Propose alternative design and construction methods to consultants.

3. Ensure smooth delivery of projects through effective planning, management, and deployment of resources.

4. Liaise with various related parties including customer, sub-contractor on site to ensure project requirements are met.

5. Identify and record any problems relating to the products and processes.

6. Undertake any other duties and responsibilities assigned by Management.



B. Job Description

1. Supervise the progress of Electrical works on site.

2. Coordination of sub-contractor ensuring the work is on schedule.

3. Ensure Electrical works are carried out according to specifications /

drawings for Electrical, etc.

4. Ensure contractor comply with all necessary standards, code of

practice and safety regulations.

C. Requirements

1. Only candidate with minimum 4 years Singapore work experience needs to apply.

2. Candidate must have a total 8 years of combined industrial experience in builder's trade.

3. Degree in Electrical Engineering recognized by Singapore

Professional Engineers Board (PEB) or equivalent

4. Required Skill(s): AutoCAD, Microsoft Office, Revit

5. Able to Design electrical requirement based on tender specification.

Please state your expexcted salary and a recent photo in your application.

Email: [email protected]

YouTrip is a Southeast Asian financial technology company dedicated to creating the next-generation of digital financial services for consumers and businesses. In 2018, we launched the region’s first and leading multi-currency payment app.

With our consumer and corporate products, YouTrip and YouBiz, we empower users with the most affordable and convenient financial innovations. YouTrip is a Major Payment Institution licensed by the Monetary Authority of Singapore (MAS), and owns principal memberships and issuing licenses with two of the largest card schemes, MasterCard and Visa.

YouTrip has been recognised by industry experts, winning awards for FinTech Employer of the Year by MAS and Singapore Fintech Association (SFA), Most Innovative FinTech Company in Southeast Asia and Best SME Finance Management Platform from APAC Insider’s 2023 Singapore Business Awards. We were also recently recognised as one of the Top Startups in Singapore by LinkedIn, further cementing our position as a leading fintech company in the region.

Our culture is entrepreneurial, open & inclusive, and teamwork-oriented. We are looking for talents with the aspiration to thrive in a rapidly growing business in the exciting FinTech space.

Job Description: DevOps Engineer

As a DevOps Engineer, you will be responsible for bridging the gap between development and our AWS based infrastructure, ensuring the seamless integration of these two critical functions. Your role is pivotal in enhancing our software delivery processes and maintaining a reliable infrastructure. You will work at the intersection of technology, collaborating with development teams to streamline the deployment, delivery, and management of software products. Your contributions will directly impact our ability to deliver high-quality software to our users efficiently.

Responsibilities:

• Ensure our AWS cloud based infrastructure is highly available, scalable, reliable, and runs efficiently.
• Design, develop, and maintain automation scripts and pipelines for provisioning, deploying, and managing infrastructure and applications.
• Spearhead our CI/CD efforts, ensuring smooth and efficient delivery pipelines for software releases.
• Embrace the power of IaC tools like Terraform to build and manage infrastructure components.
• Work your magic with Docker and orchestration tools like Kubernetes to manage containers effectively.
• Collaborate with cross-functional teams to ensure DevOps best practices are integrated into our development processes.
• Keep security at the forefront, implementing best practices and security measures throughout the infrastructure.
• Investigate and resolve issues related to deployment, configuration, and system performance.

Requirements:

• 4+ years of experience in a DevOps or similar role.
• Experience with CI/CD tools such as Jenkins, CircleCI, or GitLab CI/CD.
• Proficiency in infrastructure provisioning tools like Terraform.
• Experience with containerization and orchestration tools (Docker, Kubernetes).
• Strong understanding of cloud services (AWS, Azure, or GCP).
• Ability to troubleshoot complex technical issues and provide solutions.
• Excellent communication skills and a knack for collaboration.

To apply

If you are interested in this position, click Apply Now on LinkedIn or please send your resume to [email protected], quoting “DevOps Engineer (SG)” in the subject header.

Looking for F&B Service Crew

Location: Toa Payoh Central / Serangoon Garden Way

Job Scope:

-Basic Opening and Closing duties for the restaurant

- Greet customers and present menu

- Arrange table settings and cleaning

- Serve food/drinks

Requirements:

- At least 18 years old

- Singaporeans & PR

- 5.5 days work week

- Training provided

- Meal Provided

- Willingness to learn and a positive attitude

job Description:

~ excellence in customer service

~ ensure the outlet is clean and organized

~ carries out duties and responsibilities

~ follows strictly Standard Operating Procedures concerning hygiene, health, and safety in the outlet.

- Welcome customers, and deliver high-quality service to ensure great experiences

- Maintain overall restaurant cleanliness

- Perform daily operation tasks

- Provide excellent customer service

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

1. JOB DESCRIPTION

Job Title

Principal/Professional Engineer (Civil & Structural)

Job Description & Requirements

CEEK Pte Ltd, is a professional civil engineering design consultant with expertise in a wide variety of areas covering civil engineering, geotechnical and structural design. We place emphasis on practical in-the-field construction knowledge which allows us to effectively support main contractors at both tender and contract stage. This practical experience-based background is also applied wherever we work, whether it be for government agencies or private clients.

Our expertise encompasses both steel and reinforced/prestressed concrete structures, geotechnical work and heavy lifting as well as pre-fabricated and modularized structures (MiC). We aim to work at the forefront of engineering where the skill and inventiveness of our staff add true value to our clients.

Principal/Professional Engineer

We are looking to employ an Principal/Professional Engineer with contemporary engineering skills as well a proven experience in leading an effective team.

Duties

· Take a leading role managing delivery of our engineering projects and assisting the company management in growing our established design office in Singapore.

· Plan, design, and coordinate such as civil projects and building projects, engineering design works for local projects covering a wide variety of work nature,

· Ensure all engineering solutions comply with all relevant Statutory standards, Regulations and Codes of Practices,

· Lead and manage the in-house engineering team ensuring engineering services follow best practices,

Basic Requirements:

· Degree in Civil Engineering, must be recognized by Singapore Professional Engineering Board (PEB Singapore),

· Professional Engineer (PE) preferred or Chartered Engineer status

· Around 15 years or more of relevant experience in engineering design;

· Hands-on civil, structural and/or geotechnical expertise,

· Familiar with all aspects of the design submissions process for various types of projects in Singapore,

· Proven experience in team leadership.

Job Description:

• Responsible for supporting yield improvement, driving, and managing the continuous yield and quality improvement for various devices.
• Responsible for having close interaction with Product Test Engineering team and communicate technical product status to management.
• Responsible for following up with Foundries and test subcontractors to resolve low yield/reliability issues.
• Responsible for monitoring of parameter test and wafer sorting yield with in-depth analysis using various statistical data analysis tools and understand on semiconductor process knowledge, e.g., inline d0, ET, CPK etc.
• Develops failure analysis methodologies as required for assigned projects to enable rapid problem solving with support of internal and external parties.

Requirements:

• Degree/Master’s in Electrical Engineering, Microelectronics or related discipline.
• Strong analytical problem-solving skills.
• Capability of mass data analysis.
• Min 2 years of experience in Product Engineering.
• Salary package will be offered based on working experience.

Want to be a part of our team?

Kickstart your career with NTTS’s G.L.O.W Graduate Program, the ultimate launchpad for your tech career!

G – Grow in accelerated development path
L – Lead yourself with purpose & commitment
O – Own your career journey
W – Way Forward

Our comprehensive one-year program is tailored to empower talented and driven graduates like you with valuable hands-on experience, exposure to industry experts, and a diverse range of projects that will sharpen your skills and broaden your understanding to the ICT industry.

Working at NTT

• Deliver top-notched technical solutions to clients and take responsibility for the standards of work with client centric mindset.
• Provide client support, assist with troubleshooting and designing, configuration and escalated problem management.
• Learn to utilize automated mediums to perform staging, pre-loading configurations, and onsite deployment, ultimately enhancing proficiency in automation.
• Deliver, monitor, and maintain a stable, efficient and reliable infrastructure operations through day-to-day performance.
• Support the design, testing and implementation of routine installations of hardware including computers, network, components and multi-functional devices.
• Resolve complex issues and conduct fault analysis
• Communicate and coordinate effectively with team to resolve complex issues
• Maintain high standards of client-centricity
• Flexible working hours may include occasional overtime or shifts outside of traditional business hours

Requirements

• Bachelor’s Degree, preferably in Computer Science, Information Technology, Engineering or Math related disciplines
• Fresh graduate or less than 3 years of working experience
• Strong in interpersonal skills
• Has excellent verbal/written communication and presentation skills
• Team player, resourcefulness, strong analytical skills is an advantage
• Knowledge in the following area may be advantageous:
• Basic network automation via scripting such as Python and Ruby
• Hands-on experience on Cisco and/or Aruba LAN switches
• Wireless Technology, Wifi6 and/or 5G network
• Routing/switching technology such as BGP, OSPF, spanning tree
• TCP/IP and Firewall, Intrusion prevention concepts
• Project management methodologies