Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Experience : 6 + Years

12 months Contract

Willing to work in 24/7 shifts ( Morning , Afternoon & Night )

Position Overview:
We are seeking a highly skilled Site Reliability Engineer (SRE) to provide Level 2 technical support

. The ideal candidate will handle critical tasks such as transaction investigations, scheme rejections, dashboard creation, application monitoring, and incident resolution, while ensuring seamless operations in a 24/7 environment.

Key Responsibilities:

1. Technical Support:
   • Provide Level 2 technical support for the application.
   • Investigate transaction inquiries and ensure timely resolution.
2. Monitoring and Analysis:
   • Create dashboards in Kibana for real-time monitoring of critical applications.
   • Fetch and analyze application logs from Kibana and Linux servers to investigate issues.
3. Data Management and Reporting:
   • Write and execute SQL queries to extract data for business requirements.
   • Generate financial reports in Oracle to meet audit and compliance needs.
4. Incident and Change Management:
   • Provide 24/7 support to resolve P1 incidents within SLAs.
   • Create and implement change requests for bug fixes, OS/server patching, and application restarts.
   • Support all infrastructure-level activities for the applications.
5. Disaster Recovery (DR) Support:
   • Deliver 24/7 DR support for the business.
6. Documentation and Process Improvement:
   • Prepare knowledge transfer (KT) documents for new processes and technical troubleshooting.
   • Investigate deviations from standard processes and escalate as per the escalation matrix.

Skills and Experience:

• Strong expertise in transaction processing platforms.
• Proficiency in SQL and experience in generating reports in Oracle.
• Hands-on experience with Kibana for dashboard creation and log analysis.
• Solid understanding of Linux servers and command-line tools.
• Experience with change management processes, including OS/server patching and application maintenance.
• Proven ability to handle P1 incidents under tight SLAs in a 24/7 support environment.

Qualifications:

• Experience in supporting merchant acquiring or payment gateway applications in a Bank
• Experience of financial transaction workflows, clearing, and settlement processes.
• Familiarity with ITIL processes for incident and change management.

Work Conditions:

• 24/7 support , willing to work in rotational shifts
• Willingness to support disaster recovery operations and participate in weekend or after-hours maintenance activities.

The Service Analyst provide application support to users. The candidate poses a structured and analytical approach to the identification, diagnose and rectification of user reported issues.

a) Provide applications troubleshooting and on-site support.

b) Log, escalate and follow through with issues.

c) Simulate user problems to resolve operating difficulties.

d) Coordinate activities to identify, diagnose and rectify problems

e) Provide 24/7 primary application maintenance support.

f) Provide reports for related KTLO activities

g) Ensure that all KTLO related activities are done on time

h) Liaise with vendor on issues and ensure that issues are resolve promptly according to SLA requirements.

i) Work closely with vendor and users to fulfil operation requirements and issue resolution

j) Involvement in the system integration testing phase / User Acceptance test prior to implementation.

i) Assist, Support and Ensure contract management related process and documents are complete on time.

Requirements / Qualifications:

a) Diploma/Bachelor’s degree in computer science or other highly technical, scientific discipline

b) 1-3 yrs of Technical / Application Support experience on multi technology platforms

c) ITIL v3/v4 certification and strong service oriented experience / background preferred.

d) Knowledge and understanding of IT industry environment and business needs

SERVICE TECHNICIAN

Company Background:

An established MNC company that offers mechanical locks, electromechanical and electronic locks, locking systems and hardware, digital door locks, hotel security solutions, secure identity systems, and fittings.

Location: Central (Ubi)

Remuneration Package:

• Basic up to S$ 2500
• Payable OT Allowances
• Performance Bonus
• Mobile Reimbursements

Responsibilities:

• Perform scheduling and retrofit of automatic door components (mechanical, electrical, electronic).
• Troubleshoot and inspect automatic entrances, offering part recommendations for user consideration.
• Provide site reports to clients for work completion, testing, commissioning, and decommissioning.
• Conduct risk assessments on all automatic entrance systems and products.
• Suggest upgrades for automatic doors and propose feasible solutions for existing door systems.
• Maintain assigned service vehicle in good working condition, ensuring cleanliness and hygiene.
• Stay updated on product information and technical knowledge of both company and competitor products.
• Ensure tools and equipment are in good condition, replacing damaged items as needed.
• Perform any other tasks assigned by management or immediate supervisors.

Job Requirements:

• Minimum at least a NITEC in Engineering field
• Preferably possess at least 2 years of working experience within the door automation industry
• Knowledge in hands-on technical or mechanical experience
• Class 3 driving license will be advantageous as site travelling required

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Summary:
We are seeking an experienced Software Testing Engineer to join our dynamic team focused on developing cutting-edge medical device software. The successful candidate will be responsible for designing, executing, and maintaining comprehensive testing processes to ensure our software meets the highest standards of quality, safety, and regulatory compliance. This role requires a deep understanding of software testing and compliance.

Key Responsibilities:

• Design, develop, and execute test plans, test cases, and test scripts for software applications intended for use as medical devices.
• Collaborate with software developers and cross-functional teams to identify, document, and resolve software defects.
• Conduct various types of testing, including functional, integration, system, performance, and regression testing, to ensure software quality.
• Prepare and maintain comprehensive testing documentation, including test protocols, validation reports, and traceability matrices, required for regulatory submissions and audits.
• Work closely with quality assurance and regulatory teams to ensure software testing aligns with industry best practices and regulatory requirements.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software testing, preferably in the medical device industry.
• Knowledge of software testing tools and frameworks (e.g., Selenium, JUnit, or similar).
• Strong analytical skills with excellent attention to detail.
• Effective communication and teamwork abilities.
• Experience with regulatory compliance and documentation for medical devices will be an advantage but not mandatory.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

We are seeking a highly skilled and motivated medical device Product Development Engineer to join our dynamic team. The successful candidate will be responsible for the design, development, and maintenance of software products that meet regulatory requirements for medical devices. This role requires a good understanding of both software engineering and medical device regulations, ensuring our products are safe, effective, and compliant.

Key Responsibilities:

• Collaborate with software development team to design, develop, and maintain software applications intended for use as medical devices.
• Collaborate with cross-functional teams, including clinical, regulatory, quality, and marketing to implement product requirements and specifications.
• Ensure software design complies with relevant medical device regulations and standards (e.g., IEC 62304, ISO 13485, HSA guidelines).
• Work closely with regulatory affairs to ensure software products meet all necessary regulatory requirements and obtain required certifications and approvals.
• Prepare and maintain documentation required for regulatory submissions and audits.

Qualifications:

• Bachelor’s or Master’s degree in Computer Science, Software Engineering, Biomedical Engineering, or a related field.
• Minimum 2 years of experience in software development, preferably in the medical device industry.
• Experience with regulatory compliance for medical devices.
• Familiarity with software validation and verification processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design system architecture, design and write software for robotic systems, sub-systems or modules in a continuous integration and continuous deployment (CI/CD) environment
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Adopting latest standards and/or methodology to work (Agile, standards, open source, common platform)

Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• 4-6 years relevant experience in robotics software design, development and integration
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in as AGILE and collaborative environment using CI/CD tools and able to break down robotic software development into smaller tasks
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Electrical / Mechanical Engineering.
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

Job Responsibilities.

• Electrical design for Industrial Automation Systems
• Discuss project specification with sale department, internal design team and customer.
• Ensures project specification is sufficient for electrical design work.
• Ensure the drawing, software and manual are done and issue to the customer
• Support sales department in design concept and costing for new enquiries

Job Requirements

• Diploma/Degree in Electrical & Electronics Engineering or equivalent
• Design experience in similar capacity, preferably in Industrial Automation Systems and Robotic Systems added advantage
• Candidates without relevant experience will be considered for junior engineer role
• Occasional travel maybe required
• Able to work under tight schedule and minimal supervision
• CAD knowledge such as solid edge, Auto CAD, Inventor

We regret that only shortlisted candidates will be notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop PLC programming for Industrial Automation systems
• Work with Sales team on conceptual design
• Conduct program debugging and test run
• Update project schedule for programming, debugging, test run and installation
• Lead software design contractors on design, test run and installation
• Discuss and solve complex software related problems with customers and contractors

Job Requirement

• Diploma/Degree in Electrical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of PLC & PC Programming Languages
• Able to work under tight schedule and under minimal supervision

We regret that only shortlisted candidates will be notified.

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.
• Design and develop the layout for integrated circuits according to electronics engineering principles, using software to create design schematics and diagrams.

The Talent

• Bachelor's Degree (with min. 8 years of relevant industry experience) /Masters Degree (with min. 6 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

Service Analyst

This role is with the IT Service Delivery Team, reporting to the Service Delivery Manager. This team is responsible for Service Operations – the structure and processes which ensure accountability, oversight and auditability throughout the team.

ServiceNow is the platform used by IT and the business for many of their processes/applications. This application is owned and developed by this team.

Main Duties and Responsibilities:

• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Competencies Required:

• Excellent interpersonal skills
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules
• Extremely organised, diligent and methodical individual
• Initiative, willingness to seek and achieve improvements to processes and technology
• Ability to work as part of a team
• Good time management/planning – manages personal workload effectively, sets realistic and achievable targets and delivers those targets
• Sound problem solving and investigative skills
• Desire to follow best practice and development standards as agreed within IT
• Enthusiastic and self-motivated
• Can demonstrate confidence when placed in new or unusual situations
• Commitment to the delivery and improvement of a first class support service
• Keen to learn new skills
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Oil and Gas U.S.A. equipment manufacturer's representative located in Paya Lebar area looking for a Trainee Service Technician.

5 day week (Monday - Friday), 8.30am to 5pm

$3,000 / month

Minimum Polytechnic Diploma preferably in Mechanical Engineering with good command of English.

Only Singaporeans.

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

We are a design and build contractor in the construction industry

We also provide project management services in the construction industry.

Roles and Responsibility:

1. To assist project manager in managing construction projects in industrial /residential sectors

2. To assist project manager in managing client ,consultants , subcontractors and peers in project delivery context

3. To be responsible for progress reporting

Skill & Certification

5. Attained Degree or diploma is construction disciplines

6. Attained Safety Course for project manager certificate

7. Proficient in project Microsoft project

8. Proficient in autocad software

9. Min 1 to 3 years experience in construction industry.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering (PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 3-5 years of semiconductor fab/Assembly experience in Integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!