Responsibilities:

• Part of the VSAT product development team involved in designing LNA, Power Amplifier, Up/Down Converter operating up to Ka band frequencies

Requirements:

• Bachelor's Degree in Electronics Communication Engineering
• At least 3 years of experience in any RF system/sub-system design
• Experience in RF circuit design like LNA, PA, Up/Down Converter, Synthesizer etc
• Working knowledge of RF test and measurement equipment
• Experience in using simulation software such as AWR, ADS, HFSS etc
• Experience in VSAT system or subsystem design is an added advantage

Meranti Power Pte. Ltd., a fully owned subsidiary of Energy Market Authority, is establishing a maintenance team to maintain two open cycle gas turbines of our power generation station.

We are inviting applicants for the positions of Technical Officer (Control & Instrumentation) who shall report to the Senior Engineer / Engineer (Control & Instrumentation Maintenance) and be responsible for supporting him in the maintenance of C&I systems of the power station/plants. The Technical Officer shall support C&I team in the following:

Responsibilities:

• Responsible for proper maintenance of gas turbine, generator and auxiliary systems as assigned by Head or Engineers in-charge.
• Perform troubleshooting, predictive, preventive and corrective maintenance to ensure plant equipment and systems run smoothly and efficiently
• Identify, plan and initiate required actions to maintain the power plants for long term reliability and efficient generation output.
• Prepare technical specifications for equipment services, contract labour and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications.
• Liaise, supervise, and coordinate with contractors and vendors on projects, maintenance, repair, shut down, and overhaul works
• Support operation and maintenance engineers in investigation, analyse and determine the root cause of plant defects and outages.
• Maintain and control all records as required.
• Assist in the preparation, certification and review of all management systems, including ISO 9001, ISO 14001, ISO 18001, ISO 27001, ISO 50001 annually and provide support to the auditing parties wherever necessary, including internal & external auditors, to rectify non compliances and/or to follow up on improvement items identified during audit.
• Maintain and enhance the Control System Network and CyberSecurity of OT system.
• Support engineers in managing maintenance contracts and inspections, testing and commissioning of new equipment.
• Carry out routine and corrective maintenance programme of C&I in-charged equipment.
• Inspection and acceptance of purchased materials and contract spares.
• Reporting unsafe conditions/near miss incidents for rectification
• Monitor ad-hoc plant projects/tasks to ensure on time delivery
• Perform work orders allocated by Department Heads and/or Engineers

Requirements:

• Education in Electronics & Electrical Engineering or related discipline
• Minimum 2 years’ C&I maintenance experience in a power plant or related industry
• Willing to work overtime
• Self-driven with good working attitude and possess keen learning disposition
• Proven attendance record and works well in a team
• Work location is in Jurong Island (Transport to and from Jurong East MRT are provided)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

As a NAND Silicon Design Validation Senior/Principal Product Engineer at Micron Technology, Inc., you will be responsible in developing, validating, characterizing, and qualifying new state-of-the-art NAND Flash memory products. In this role, you will be involved in pre-silicon conceptual design and preparation work, run simulations, create and maintain design and validation documentation, analyze bench and parametric data as well as to debug & resolve yield, quality and reliability failures due to design related issues. You will also refine and develop best known methods and automation for design validation of current and future products.

You will also be responsible to work with NAND R&D, Designers and other various Engineering functional groups to troubleshoot, develop and validate new designs to meet specific product requirements. Product Engineers are the key product-specific point of contact for critical issues and act as the main interface between Research and Development, Manufacturing, Business Units, and Quality Assurance departments.

Responsibilities:

• Responsible for new product startup to deliver product specifications and requirements
• Define and validate product configuration parameters
• Create validation flow for silicon design margin characterization and validation in volume.
• Support design verification and in-depth circuit of new products using CAD tools and Verilog simulations
• Identify design marginalities and recommend design fix for circuit-related problems
• Perform electrical failure analysis to understand the root cause of device marginalities or failures
• Utilize engineering bench and testers to perform device characterization and electrical failure analysis

Qualifications/requirements:

• At least bachelor degree from electrical/electronicsor Computing engineering.

Customer Service Executive

· Review customer inquiries for the company's import and export freight and logistics business scopes

· Prepare accurate and detailed quotations for customers

· Clarify and negotiate proposals with customers to ensure customer satisfaction

· Review customer orders to ensure consistency with quotations offered

· Prepare and process import and export shipping documentation and liaise with relevant stakeholders such as shippers, consignees, various authorities, and shipping and overseas agents to execute freight operations in a proper and efficient manner

· Liaise with logistics appointed subcontractors and supervise the delivery of related logistics services to ensure they are delivered properly and efficiently

· Take appropriate actions for non-conforming services and provide feedback for continual improvement

· Perform necessary corrective and continual improvement actions and programs as directed by management

We are seeking a highly skilled, motivated and experienced deployment Engineer to join our dynamic team. The team here bring the solution and designed from the initial presales stage into actual setup for our clients.

Responsibilities:

Position Overview: As the Senior Network/Security Post-Sales Engineer Team Lead, you will be a key leader within our post-sales engineering team, responsible for overseeing the successful implementation and deployment of our network and security solutions. You will lead a team of post-sales engineers, providing technical expertise, guidance, and mentorship to ensure exceptional service delivery and customer satisfaction. Additionally, you will collaborate closely with cross-functional teams including sales, product management, and support to drive continuous improvement and innovation.

Key Responsibilities:

• Lead and mentor a team of post-sales engineers responsible for the implementation and deployment of network and security solutions.
• Provide technical leadership and guidance to the team in resolving complex technical issues and challenges during implementation.
• Collaborate with sales, product management, and support teams to develop and execute comprehensive implementation plans tailored to meet customer requirements.
• Serve as a subject matter expert on our network and security solutions, providing pre-sales support as needed to assist in solution design and proposal development.
• Drive customer success by ensuring projects are delivered on time, within budget, and meet or exceed customer expectations.
• Develop and maintain strong relationships with key stakeholders, including customers, partners, and internal teams, to ensure alignment and customer satisfaction.
• Stay informed about industry trends, emerging technologies, and best practices related to network and security solutions, and leverage this knowledge to drive continuous improvement and innovation within the team.
• Contribute to the development and improvement of processes, tools, and methodologies to streamline implementation and enhance customer experience.
• Collaborate with senior management to develop strategic initiatives and drive business growth.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or related field. Master's degree preferred.
• 8+ years of experience in a technical role within the network and security industry, with a strong understanding of networking protocols, security technologies, and best practices.
• Proven experience leading and managing technical teams, with a focus on driving results, fostering collaboration, and developing talent.
• Excellent communication skills, with the ability to effectively communicate technical concepts to both technical and non-technical audiences.
• Strong problem-solving skills and the ability to thrive in a fast-paced, dynamic environment.
• Relevant certifications such as CCIE, CISSP, or equivalent are highly desirable.
• Experience with network and security solutions from leading vendors such as Cisco, Palo Alto Networks, Aruba/Juniper, etc.
• Experience with Cloud Networks, Containers will be advantageous
• Experience with project management should be part and parcel for project coordination and management.

This job description outlines the primary duties and qualifications for the role of Network/Security Engineer within our organization. The responsibilities and requirements may evolve over time to align with the needs of the business and advancements in technology and project needs.

Responsibilities:

• Support for CXL Product Failure Analysis from NPI to HVM stage.
• Responsible in fulfilling product yield milestones during both NPI and HVM stages through optimization of test methodology & test flow.
• Develop tool/script to support yield evaluation, data analysis and test correlation, including Product Database maintenance & management.
• Perform CXL characterization to optimize product performance.

Requirements:

• Bachelor/Master’s degree holder in Electrical/Electronic/Computer Engineering/Computer Science.
• Good interpersonal and communication skills.
• Proven good problem-solving skills.
• Good understanding of computing system interface such as PCIe.
• Proficiency in programming languages such as C/C++/ Python/SQL/MySQL.
• Relevant experience in setup & managing of Database data analytics and reporting will be an advantage.

Description of the Roles:

As a key member of the mechanical engineering team, you will work on cross-functional team projects to develop and deliver new and innovative technical solutions for medical products. You will play a critical role in medical robotic projects developing and integrating diagnostic, interventional, and machine learning technologies.

Specifically, you will provide electro-mechanical engineering expertise for product development and integration. You will be working on designing mechanisms and structures, and integrating actuators, motion components, and sensors to achieve innovative product functionalities.

The challenge for you is to successfully design and develop electro-mechanical systems in collaboration with other engineering teams, to achieve an efficient operation, reliable and safe product for clinical applications.

Requirements

· Bachelor or Master in Mechanical/Mechatronics/Biomedical engineering.

· 3-5 years’ experience in the design & development of electro-mechanical or robotic system.

· Experience at least one cycle of product development.

· Academically inclined with at least 2nd Upper Honours.

· Able to communicate and write documents in Chinese (preferred).

· Strong technical capability to understand designs for mechanical structure and electro-mechanical assemblies.

· Strong interest in mechanism design, kinematic and dynamic of mechanics, especially in precision mechanism.

· Good knowledge of various materials (metal and plastic) and manufacturing processes for product design.

· Proficient in 3D CAD modelling and simulation software like SolidWorks.

· Good knowledge and experience in GD&T, tolerance stack-up analysis.

· Good knowledge and experience in performing FEA and motion analysis and technical review of mechanism design.

· Able to travel on short notice for short period.

· Able to work overtime when necessary.

Desirable Traits/Personality

· An analytical problem solver to identify root causes, devise/evaluate/recommend optimal solutions to prevent future issues.

· Strong interests in robotic system, flexible robotic instruments for medical application.

· Able to communicate technical information and build interpersonal relationships with the team members.

· Able to work independently and driven to achieve high standards.

· Intellectual curiosity about new technologies and innovations.

· Creative with critical thinking ability.

· Last but not least, a fun person to work with.

Responsibilities

· Work with cross-functional teams on detailed electro-mechanical design at system level, sub-systems, modules, and components level.

· Support and review critical technical development related to electro-mechanical system.

· Support feasibility study on conceptual design for new products.

· Resolve issues and improve product reliability.

· Ensure the product design and functionalities meet user needs, able to meet cost target and quality specifications.

· Perform analytical studies, risk assessment, mechanical verification, and validation.

· Co-ordinate design and production activities locally or with overseas partners.

Ensure proper documentation (Design History File) for mechanical design.

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

We Are

YouTrip is a Southeast Asian financial technology company dedicated to creating the next-generation of digital financial services for consumers and businesses. In 2018, we launched the region’s first and leading multi-currency payment app.

With our consumer and corporate products, YouTrip and YouBiz, we empower users with the most affordable and convenient financial innovations. YouTrip is a Major Payment Institution licensed by the Monetary Authority of Singapore (MAS), and owns principal memberships and issuing licenses with two of the largest card schemes, MasterCard and Visa.

YouTrip has been recognised by industry experts, winning awards for FinTech Employer of the Year by MAS and Singapore Fintech Association (SFA), Most Innovative FinTech Company in Southeast Asia and Best SME Finance Management Platform from APAC Insider’s 2023 Singapore Business Awards. We were also recently recognised as one of the Top Startups in Singapore by LinkedIn, further cementing our position as a leading fintech company in the region.

Our culture is entrepreneurial, open & inclusive, and teamwork-oriented. We are looking for talents with the aspiration to thrive in a rapidly growing business in the exciting FinTech space.

You Will

• Attend to day-to-day customer inquiries through phone calls and emails in a timely and accurate manner;
• Resolve issues and troubleshoot technical problems by working with other departments;
• Stay on top of product feature releases and maintain an in-depth knowledge of how YouTrip functions;
• Provide critical customer feedback to internal stakeholders to ensure that our product is up to customer expectations;
• Perform other related duties as may be assigned from time to time
• Attend to potential complaints raised by BPO team including but not limited to level-2 escalations
• To capture Red Flags via close monitoring of overall Ticket aging i.e External Threats (CEO, Social Media. MAS, etc.)
• Raise Red Flags as per our Escalation Guideline SOP
• To monitor Level-1 team adherence i.e ensure that L1 reported for duty as per Schedule
• Manual ticket allocation including pulling out and merging Chargeback tickets
• Take over cross team escalations where CS team are being tagged for action
• Adhoc tasks as assigned by manager i.e Internal Approvals

You Are

• Customer Service Enthusiast – You are passionate in driving operational excellence with a strong customer-oriented mindset. Ideally 5 years of relevant experiences. Experiences in Fintech / Banking or a call center environment is preferred. A bonus if you have exposure to Zendesk and Slack.
• Self-Driven Attitude – You are self-driven and able to work in a fast-paced environment with tight deadlines.
• Independent Worker & Team Player – You are able to work independently, or with a team, demonstrating strong interpersonal, leadership and organisational skills. You are also able to promote a culture of collaboration and teamwork across organization to optimise overall business growth
• Natural Communicator – You have strong interpersonal and communication skills with all levels of the organization from team members to executives
• Self-Starter – You are ambitious to learn and be challenged, and possess a detailed oriented mindset

What You can Expect from Us

• An innovative culture that encourages talents to work highly collaboratively in a respectful, friendly environment
• Access to a deep bench of technical and business experts
• Working with an entrepreneurial team of people from across the region

To Apply

If you are interested in this position, please click Apply Now and send in your CV. Due to the high volume of applications, only shortlisted candidates will be contacted.

Job Descriptions

• Manage customer flow and seating arrangement
• Greet customers, take orders, serve food and beverages and clear tables
• Respond promptly to customers’ enquiries with a consistently positive and helpful attitude, including answering questions about the menu.
• Ensure restaurant cleanliness daily by clearing tables, returning dishes to the kitchen, sweeping and mopping floors, washing and sanitizing kitchen utensils, and servicing restrooms.
• Handle guests’ concerns and complaints professionally and calmly to resolve problems according to restaurant policy.

Job Requirements

• No Requirements

Benefits

• No AWS but there is Bonus
• 7 days AL and 14 days medical leave

Working hours

• 6days (Tuesday Off)

Job Description

• Perform engineering hardware prototype testing and troubleshooting.
• Perform testing on GUI Application software and embedded firmware.
• Perform testing and troubleshooting of different type of assembled Burn-in driver boards and other related circuit boards.
• To perform electrical wirings, hardware integration and testing of Semiconductor Burn-in systems and customized Test equipment.
• Resolving day-to-day System manufacturing’s hardware and software technical problems.
• Assist in all kinds of Engineering Projects and Manufacturing work orders, including preparing Mechanical drawing, Electrical drawing, BOM preparation and Engineering documentation.
• Perform local and oversea burn-in system / test equipment field servicing, installation, preventive maintenance and customer’s training.

Job Requirements

• Minimum Degree in Electrical Electronics Engineering.
• Minimum 2 years of experience with software design.
• Self-motivated, able to work with minimum supervision.

Job duties & responsibilities:

• Provide technical guidance in developing new PCB designs and updating existing designs.
• Develop PCB layouts, perform component placements and determine wire routings.
• Verify existing designs and recommend improvements.
• Recommend new design concepts and validate the concept feasibility using circuit simulations.
• Prepare design documentations, requirements specifications and PCB models.
• Perform PCB design testing and analyze test results.
• Monitor and report project status to Manager on regular basis.
• Attend project meetings to discuss about project progress and issues.
• Ensure that project deliverables meet customer expectations.
• Propose process improvements to ensure PCB functionality, quality and reliability.

Job requirements:

• Diploma / degree in Electrical & Electronics Engineering /Computer Engineering.
• Preferably 1 year of experience in PCB schematic design & PCB artwork design.
• Entry-level candidates with keen interest in PCB design are welcome to apply. Training will be provided.
• Knowledge in Althium, Protel or any other electronics design software would be an added advantage.
• Self-motivated.

Purpose:
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements

Responsibilities:

• Understands the specifications and requirements in the area of mechanical packaged equipment and system (such as Glycol Dehydration Package, Chemical Injection package, H2S removal package,Produced water treatment Package, WHRU, Pressure vessels, Pumps,etc., ) of the assigned package.
• Responsible for Mechanical Design of packaged equipment in compliance with applicable International codes ASME, API etc.,
• Independently develops technical specifications/standards and Requisitions for packaged equipment and system such as Glycol Dehydration Package, Chemical Injection package, H2S removal package, Produced water treatment Package, WHRU, etc.
• Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less complex packages and middle risk equipment are assigned.
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.
  
  Requirements:
• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, NACE, etc.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for a Commissioning Engineer - EPMS to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Undertake technical reviews of customer drawings and specifications
• Monitor and control commissioning deliverable progress to ensure the on-time delivery of the projects. Use the tracking board tool and take pro-active decisions and actions to prevent any slippages. Ensure full & effective reporting of project progress & status to the management
• Manage Project Risks & Opportunities associated with the commissioning deliverables by assessing, identifying, mitigating and controlling any potential situations that could impact (negatively or positively) the performance of the project
• Master Variation Order & Claim process for both Customer and vendors. Work with the Project Manager to obtain Variation Orders for any deviation from the contractual scope
• Mitigate any source of conflict with customer or internal stakeholders throughout the project installation phase
• Drive customer relationship and proactively communicate (executive summary, emails, calls, meetings). Establish key relationships with all relevant project stakeholders

What's in it for you?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

What qualifications will make you successful for this role?

• Bachelor’s Degree in Mechanical, Electrical, or an equivalent engineering discipline
• Minimum of five years' work experience in EPMS, BMS, HVAC, or Industrial Controls/ Automation
• Previous work experience as a automation/ controls commissioning engineer and managing a team of technicians is preferable
• Knowledge of Modicon PLCs and EcoStruxure Control Expert (formerly Unity Pro)
• Knowledge of Citect SCADA
• Advantage to have experience in commissioning within a Data Centre environment

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

perform timely pickup and deliveries (including POD) of shipments for company-assigned areas

via company's mobile app

need to be familiar with Singapore roads

able to read and converse in basic English to liaise with customers

able to drive home company vehicle

employee responsible for any parking or traffic summons while driving the company vehicle

employee must report all accident with 24 hours of the occurance

Monday-Friday 08:00am -18:30pm. Saturday 09:00 -13:00

Customer Service Specialist

12-month contract

Work Your Magic with us!

Ready to explore, break barriers, and discover more? We know you’ve got big plans – so do we! Our colleagues across the globe love innovating with science and technology to enrich people’s lives with our solutions in Healthcare, Life Science, and Electronics. Together, we dream big and are passionate about caring for our rich mix of people, customers, patients, and planet. That's why we are always looking for curious minds that see themselves imagining the unimaginable with us.

Main Responsibilities:

• Proactively resolve order issues with customers and internal stakeholders to fulfil customers’ delivery requirements.
• Process customer purchase orders in accordance with established KPI and to meet sales terms & conditions.
• Ensure products included in quotations are legal for sale to customers.
• Ensure all orders fulfil regulatory requirements and documentations before processing and releasing for deliveries.
• Ensure sale prices are in accordance with our pricelist or businesses’ agreed prices.
• Liaise with customers regarding enquiries on their orders.
• Proactively reach out to customers on open orders which are due and push for deliveries.
• Proactively update customers on orders & delivery status.
• Liaise closely with Cash-On-Delivery customers for payments before processing orders.
• Work closely with other departments to resolve issues and drive efficiency
• Involve in projects involving departmental processes

Requirement:

• At least diploma qualification/Bachelor degree’s in any field
• Minimum 1 years of experience in order management and customer service
• Experience in SAP system
• Proficient in MS suites such as MS Excel
• Good communication skills
• Highly-organized

Reg no: R22104540

EA license no: 94C3609

Purpose
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Responsibilities

• Understands the specifications and requirements in the area of marine mechanical packages and equipment (such as Essential and Emergency Generator, Non API pumps, Fire water pumps, Garco pumps, Inert Gas Generator package, low and High Foam Expansion Packages, etc., ) of the assigned package.
• Responsible for Mechanical Marine vendor packaged equipment in compliance with applicable International codes (such as IMO, SOLAS) Classification Rules, ASME, etc.,
• Independently develops technical specifications/standards and Requisitions for marine packaged equipment and system such as Essential and Emergency Generator, Non API pumps, Inert Gas Generator package, low and High Foam Expansion Packages, etc.
• Independently evaluates the technical aspects of bids received from suppliers and concludes assessment to the bide. Generally, less complex packages and middle risk equipment are assigned.
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know- how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements

• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable
• Experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, NFPA, International codes (such as IMO, SOLAS) Classification Rules and regulations, etc.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for a Commissioning Engineer - BMS to make a difference!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Undertake technical reviews of customer drawings and specifications
• Monitor and control commissioning deliverable progress to ensure the on-time delivery of the projects. Use the tracking board tool and take pro-active decisions and actions to prevent any slippages. Ensure full & effective reporting of project progress & status to the management
• Manage Project Risks & Opportunities associated with the commissioning deliverables by assessing, identifying, mitigating and controlling any potential situations that could impact (negatively or positively) the performance of the project
• Master Variation Order & Claim process for both Customer and vendors. Work with the Project Manager to obtain Variation Orders for any deviation from the contractual scope
• Mitigate any source of conflict with customers or internal stakeholders throughout the project installation phase
• Drive customer relationship and proactively communicate (executive summary, emails, calls, meetings). Establish key relationships with all relevant project stakeholders

What's in it for you?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Blue sky Friday
• Worldwide Employee Stock Ownership
• On-site gym

…and more!

What qualifications will make you successful for this role?

• Bachelor’s Degree in Mechanical, Electrical, or an equivalent engineering discipline
• Minimum of five years' work experience in EPMS, BMS, HVAC, or Industrial Controls/ Automation
• Previous work experience as an automation/ controls commissioning engineer and managing a team of technicians is preferable
• Knowledge of Modicon PLCs and EcoStruxure Control Expert (formerly Unity Pro)
• Knowledge of Citect SCADA
• Advantage to have experience in commissioning within a Data Centre environment

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Purpose
To independently determine and prepare the Requisitions for packages of mechanical components and / or equipment that are required in a project, assists in evaluating the technical aspects of bids and executing in order to deliver the packages on time and to ensure that the packages meet the technical requirements.

Responsibilities

• Understands the specifications and requirements in the area of mechanical static equipment and components (such as pressure vessels, heat exchangers (shell and tube, plate and frame types), separators, process and utility pressure vessels, etc.) of the assigned package.
• Responsible for Mechanical Design of Static Equipment in compliance with International codes ASME Sec VIII Div-1, Div-2, EN-13445 and equivalent.
• Independently develops technical specifications/standards and Requisitions for rotating equipment such as Centrifugal Pumps, Positive Displacement pumps, Air and utility compressor, steam/gas turbines etc
• Independently develops technical specifications /standards and Requisitions for static equipment such as Pressure Vessels, Separators, Process Vessels, Heat Exchangers, Air Coolers, etc
• Assists in placing and executing the orders. After orders, independently reviews Supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakesholders.
• Provides technical/engineering support/visit and advice for quality work at supplier shop and Construction/Commissioning work at site
• Independently resolves technical issues using expert knowledge and technical know­ how that may arise during the execution of package engineering, fabrication and post delivery.
• To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements

• Bachelor Degree in Engineering
• Minimum 10 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable
• Experience in FPSO, off-shore application
• Possess relevant experience working on EPC projects
• Shall be conversant with design standards and International Industry Codes such as ASME, API, NACE, WRC, etc.

About Us

SPH Media is evolving, and we welcome talented individuals to join us in our transformation journey. Our mission is to be the trusted source of news and lifestyle content in Singapore and Asia. As an employer, we are committed to rewarding our people fairly and developing them in their careers. Grow your career in a vibrant and collaborative environment built around a culture of respect and inclusivity. Join us! To work with passionate people who impact lives through the stories they tell.

About the Role

We are looking for a Senior Staff/Senior/Lead Engineer proficient in ReactJS and TypeScript. The successful candidate will work in a dedicated team seated within The Straits Times to develop a modern, greenfield SSR + SSG React website and rendering stack to serve content to readers worldwide across multiple publications.

Responsibilities:

• Lead the end-to-end development of web applications using ReactJS, ensuring adherence to best practices and coding standards.
• Collaborate with a dedicated team to develop a modern SSR + SSG React website and rendering stack.
• Write clean, maintainable code adhering to best practices.
• Develop and implement unit and end-to-end tests for quality assurance.
• Participate in code reviews and provide constructive feedback to peers.
• Contribute to the improvement of development processes and tools.
• Optimize application performance and ensure scalability through effective unit testing strategies.
• Participate in code reviews and provide constructive feedback on styling, unit test coverage, and implementation.
• Mentor junior developers on Tailwind CSS best practices, unit testing, and ReactJS development.
• Collaborate with product managers, designers, and other stakeholders to define project requirements and acceptance criteria.

Who We Are Looking For

Qualification

• Bachelor's degree in Computer Science or equivalent

Skills & Competencies

• Min 5+ years of experience in developing web applications using ReactJS, JavaScript, preferably also TypeScript.
• Strong proficiency in Tailwind CSS, HTML, and related web technologies.
• Extensive experience with Redux or similar state management libraries.
• Deep understanding of RESTful APIs and asynchronous programming.
• Extensive experience writing unit and end-to-end tests with proficiency in unit testing frameworks such as Playwright and Vitest.
• Excellent problem-solving and communication skills.
• Ability to lead projects and work effectively in a team environment.
• Experience in developing highly performant websites for serving content at scale.
• Extensive SSR or SSG experience, possibly with React.
• Experience with AWS services, including Lambda.
• Experience in maintaining CI/CD pipelines.
• Experience in using Docker or Terraform.
• Experience with server-side rendering (SSR) using frameworks like Next.js
• Familiarity with version control systems (e.g., Git)
• Understanding of agile development methodologies

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

The Senior Engineer will be providing technical services to support the design, implementation, and ongoing support of IP-based media solutions within the broadcast infrastructure. Ensuring successful integration, maintenance & support of IP technologies for the production, management, and distribution of media content in the broadcast environment.

The role involves assisting of projects execution that involve multiple stakeholders and vendors. The individual contributes to the upkeep of IP-based media broadcast systems and infrastructure, doing preventive maintenance for broadcast-related equipment and infrastructure. The individual should be able to perform the plans, demonstrating the ability to efficiently manage multiple tasks and engage with various stakeholders. Collaborating with diverse teams to implement and maintain the broadcast media production workflow.

Responsibilities

• Assist with the implementation of IP-based media systems, ensuring scalability, flexibility, and adherence to industry standards.
• Collaborate with cross-functional teams to integrate IP technologies into existing and/or new broadcast systems & infrastructure.
• Perform cyber security management within the broadcast network in accordance with organisation policies.
• Assist with integrating IP-based solutions for media production, including video-over-IP, audio-over-IP and associated control protocols.
• Testing of system to validate the performance, reliability, and quality of broadcast systems.
• Adapting and migrating from traditional broadcast systems to IP-based solution. Minimising downtime and disruptions.
• Troubleshoot faults and implement solutions to minimise downtime.
• Perform repairs on broadcast system & equipment.

• Diploma/Degree in Electronic & Electrical Engineering or Information Engineering & Media or Computer Engineering from a recognised tertiary institution.
• 3 to 5 years of relevant experience in the media industries.
• Hands-on Engineer with interest in broadcast engineering
• Knowledge in IT computer networking and cybersecurity
• Analytical and troubleshooting skill to support broadcast IT systems
• Proficient in written and communication skills
• A team player who is able to work independently and is prepared to perform shift duties, late night works and standby support for key events

Overview

We are looking for result-driven candidates who would thrive under a fast-pace working environment and having a strong desire to make an impact in their organization.

What you will do

• Own the entire layout implementation process: schedule estimation, floorplanning, layout construction, physical verification and memory compiler leaf-cell creation
• Implement top quality layout which meet the specifications set forth by designers and layout leads while meeting the project objectives and milestones
• Diligently perform all physical & reliability verifications (DRC/LVS/ERC/etc.) on the layout designs and ensure the database is fully compliant with all requirements of tape-out flow
• Work closely with multi-functional members to optimize layout realization according to the desired power, performance and area optimization requirement
• Candidates with strong soft skills could be tasked to undertake project management, coaching of new hires/interns or workflow improvement initiative

What you will bring

• Bachelor’s degree in Electrical/Electronic/Computer Engineering or equivalent
• At least 8~10 years of direct experience in custom Memory layout implementation (SRAM/ROM/TCAM/CIM) in advanced finFET/GAA process nodes
• Proficient in understanding DRM of advanced CMOS technologies and have a good understanding of deep sub-micron and DFM issues (eg. WPE, LOD effects, etc.)
• Strong knowledge in floor-planningtechniques at different hierarchies, with emphasis on power mesh planning, critical block placement, critical signal routing and top-down integrationflow
• Strong knowledge in executing and debugging various physical verification checks like DRC, LVS, ERC, Antenna, Density, ESD, LUP, EM, IR, etc.
• Proficient in Synopsys/Cadence layout editors
• Ability in script programming (eg. Python, Tcl, Perl or C-shell) is a plus
• Team player and effective in cross-team communication and time management

Location: One North, Singapore

Why MediaTek

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

• Applying software engineering principles to analyze and problem-solve, and design a solution
• Developing and executing project plans
• Creating technical specifications
• Writing code in various languages, like Java, Ruby on Rails or .NET programming languages
• Designing and developing test cases
• Executing full lifecycle software development
• Programming well-designed, testable, efficient code
• Producing specifications and determine operational feasibility

Responsibilities

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

Requirements

• Recognised Degree in Electrical Engineering
• Minimum 7 years of relevant experience in industry

The Role:

Based in the WSP Singapore office, the Consultant will be delivering ICT & Telecommunications Engineering and Consultancy Services to Clients across multiple sectors such as data center, healthcare facilities, aviation and property commercial buildings. You will be part of a rapidly growing Technology Consulting team, developing and managing technical delivery through new opportunities and existing clients.

The ideal candidate should have an interest in applying their expertise, project management and thought leadership to deliver digital design. We are looking for highly effective people who can work collaboratively with direct/ indirect (multidisciplinary) colleagues and external stakeholders to deliver great outcomes for our clients.

Key Responsibilities:

1. Responsible for delivery; taking ownership of projects as well as tasks.
2. ICT & Telecommunications detailed design documentation such as:Client Return Briefs
   Reports
   Technical Advice
   Specifications
   Schematics
   Drawings
   
   Detailed sections and installation drawingsSite inspections and construction management duties including RFI and Submittal review
   Attend meetings independently
   Coordination with relevant engineering disciplines to ensure the ICT network can support their services (Smart Building, Electrical and Mechanical, AV, Security)
   Coordination with Architect to ensure adequate spatial provisions have been provided

Qualifications:

• Relevant tertiary qualifications (BSci, BEng or equivalent)
• Minimum of 2-year consulting experience and 4-8 years’ industry experience on ICT projects
• Well versed with providing ICT & technology advisory services and technical designs
• Sound understanding of International and Singapore ICT Standards
• Proven ability of writing well-structured and clear design reports
• Proficient in commercial grade building ICT system design and designing IT/OT networks
• Track record of leading medium scale projects and contributing to larger projects
• Familiarity with design and construction platforms and tools (Revit, CAD, Bluebeam, Autodesk360, etc.)
• Comfortable handling competing priorities, prioritising work, and meeting deadlines
• Strong interpersonal and communication (written/verbal) skills.

Preferred Qualifications:

• RCDD or other BICSI credential
• CCNA, CCNP or other similar networking credential
• CWNA, CWDP or similar wireless network credential
• Experience in a consulting engineering setting
• Experience in Smart Building Technology design
• Experience involving the design of Integrated Converged Networks
• Data centre project experience