• Marine Service Engineer
• Office location : Boon Lay Way
• Working Location: On board ship
• Working days: 5 days (Mon- Friday)
• Working hours : 8am - 5pm
• Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Work experience in Process Instrumentation is a plus
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.
• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.
• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.
• Manage all orders efficiently until fulfilment stage, by working closely with Service team.
• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.
• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.
• To provide support to other service activities that may be assigned in the course of work
• Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.
• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Requirement

• Min. Diploma in engineering
• Min. 3years' experience as a service engineer in Lifescience/ Healthcare / Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred.
• Work experience in Process Instrumentation is a plus.
• Good team player.
• Customer service oriented.

If interested, please email your resume to [email protected]
➖
Alex Goh Hock Leong
(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Job Info:

• Salary: Basic up to $3500 + Mobile Allowance $100 + Standby Allowance + AWS + VB
• Working Hour: Monday - Friday (8:30 am - 5:30 pm)
• Location: Jurong East

Job Scope:

• Address equipment faults at customer locations
• Coordinate with customers and subcontractors for project tasks
• Supervise work progress to uphold schedule and quality benchmarks
• Ensure prompt delivery of materials and equipment for site installations or fault repairs
• Perform routine maintenance for clients

Requirements:

• Diploma in Electronics and/or Electrical Engineering
• 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc
• Standby duty is required
• Possess a valid class 3 driving license

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Chan He Guang | EA Personnel No.: R23117560

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Our client is a leading global company in semiconductor and FPD production equipment.

Duration: 1 year (Renewable and Convertible)
Working Hours: Monday - Friday @ 8.30am - 5.30pm
Working Location: Woodlands (Client Sites)

Salary: Up to $4k + Bonus

Responsibilities:

• Troubleshoot and resolve technical issues on semiconductor equipment and systems including computer systems, complex software, or networked and/or wireless systems
• Perform on-site installation, continual improvement programmes, parts' overhaul, preventive maintenance, modifications and repair works on equipment
• Serves as company liaison with customer on administrative and technical matters for assigned projects
• Coordinate logistics arrangements and with customer on equipment related matters
• Responds to customers’ complaints, provides time to solutions to resolve customers’ issues
• Monitors the performance of the product, provide regular update report and feedback on customer’s service requests
• Reports common complaints of customers to management in order to address the situation for future reference

Requirements:

• Degree/Diploma in Electrical/ Electronic Engineering or its equivalent
• At least 2 years of relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Require to work or be on standby during after office hours/weekend/public holiday

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/10276

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Service Engineer

Location: Tuas (Company pick up available - West & North)

Salary: $3,000 - $4,000 + OT + AWS + Performance bonus

Working days: Monday - Friday

Working hours: 8:30am – 4.30pm

Our client is one of the world's largest manufacturers of hydraulic mobile cranes, and it has a wide product range.

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Carry out on-site or remote support activities and close service calls
• Support system warranty standby
• Install a highly automated high vacuum CVD/PVD systems in a cleanroom environment
• Carry out quality installation, Preventive Maintenance (PM) according to schedule
• Participate and manage the new product release process as required
• Initiate, identify and participate in internal processes re-engineering projects
• Make timely reporting of issues and problems

skills & experience required

• Bachelor’s degree / Diploma in electrical / electronics / mechanical engineering or equivalent
• Min 1 year / intern experience in installation & troubleshooting of equipment in a cleanroom environment
• Understand / hands on with ALD / CVD / PVD systems/ sputtering / semiconductor / capital equipment
• Ability to build and maintain good relationship with customers
• Familiar with high complexity low volume environment
• Customer-oriented mentality and excellent client servicing skills
• Willing to work in north area of Singapore (Yishun / Woodlands / Sembawang)
• Training given to candidate with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Job Description:
As a Service Engineer, you will be responsible for ensuring that our equipment is efficiently maintained, installed, and serviced. This role requires close collaboration with our clients, offering technical support and hands-on troubleshooting to meet their requirements.

Key Responsibilities:

• Provide support, installation, commissioning, troubleshooting, repairing and preventive maintenance for equipment.
• Communicate with suppliers, peers, and customers (business units and manufacturing sites) to accurately relay technical information.
• Response to customers’ requests by troubleshooting problems and take corrective actions within targeted timeline.
• Provide technical training and support to client staff as necessary.
• Maintain accurate service records and documentation for all client visits.
• Managing spare parts inventory.
• Practices good health and safe workplace.

Requirements:

• Degree in any engineering studies.
• Min 1 or 2 Years of relevant experience
• Exp in Semiconductor Industry / handling Semiconductor equipment will be added advantages
• Assembly exp will be added advantages
• Strong troubleshooting and problem-solving skills.
• Ability to work independently and communicate effectively with clients.
• Bilingual (Chinese & English) to liaise with Chinese speaking associate.

Interested candidate please click “QUICK APPLY” or forward a copy of your resume to [email protected]

HR in-charge: KC Cheah

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Service Engineer (Refinery/Petrochemical/Power Plant Analyzer)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

Local Assignment:

• Perform in-house testing, Electrical & Pressure Tests, Factory Acceptance Test (FAT), Site Acceptance Tests (SAT)
• Perform site commissioning/start-up for analytical systems and project-related jobs
• Ensure that testing records and other related technical documents for each analytics system are kept and maintained in the department documentation system
• Ensure ownership of and compliance with all departments and company initiatives
• Perform internal and external coordination with regard to issues related to projects, overseas commissioning, and local maintenance activities
• Carry out customer services for preventive maintenance and shutdown of analytics systems services
• Carry out on-call/ emergency service jobs for local customers
• Support the department training initiatives and assist in developing the skills of new engineers and technicians
• Support the department initiatives on customer service, best practices, testing methods, documentation, job planning, and project execution
• Support the company initiatives on safety and continuous improvement
• May be assigned for long-term service contracts in Jurong Island

Overseas Assignment:

• Perform site commissioning/ start-up services for analyzer systems

APPLY NOW!!!

• Min. Diploma in Electrical/Electronics/ Instrumentation
• Min. 3 years of working experience with Refinery, Petrochemical and power plant analyzer
• Able to work independently and write effective good service report
• Perform work with Hart communicator, computer, and PLC is a plus
• Willing to take up assignments for overseas long/short-term maintenance contract

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65594 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Role:

Maintenance Technician (Welding / Piping)

• 5 Day (Mon – Fri): 8am-5.30pm + OT
• Salary: $1,600 - $2,200 +AWS +Allowance + VB
• Location: Senoko（Sembawang Area）, transport provided

Requirements:

• Minimum Nitec or equivalent.
• Relevant experience in electrical installation, PLC (Programmable Logic Controller) and electrical maintenance preferred.
• Good technical knowledge with hands-on experience in troubleshooting & servicing HVAC equipment eg chillers, cooling towers, aircon, air compressors etc
• Experience in simple welding, piping work, and simple machining work.
• Must be willing to wear jumpsuit and mask as Personal Protective Equipment while working in the production area.

Responsibilities

Assist in the maintenance of mechanical or electrical installations and equipment within the compound.

Provide engineering support to all depts if required

Diagnose and repair faulty equipment, perform preventive maintenance to minimize equipment breakdown.

Carry out instrumentation calibration activities.

In charge of maintenance and troubleshooting of entire facility duties.

Involve in TPM (Total Productive Maintenance) activities.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Job Description:

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.
• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.
• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.
• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.
• Manage all orders efficiently until fulfilment stage, by working closely with Service team.
• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.
• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements:

• NTC2 or Diploma in Electrical/Electronic/Process Instrumentation / /Mechatronics Engineering

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Industry: Manufacturing

Located at Ubi

Japanese MNC

Have AWS + Bonus + Yearly increment

Mon to Fri 8.30am to 5pm

Basic $2400-$2800+fix allowances $500 or $1200 (own car)

Training provided

Job Description

• To support, troubleshoot and maintain automation machine in Field / Site.
• To setup and debug automation machine in factory.
• To support commissioning and decommissioning on automation machine.
• To provide training to customer for automation machine at site.
• To assemble Mechanical modules, reference from CAD model.
• To troubleshoot errors in design on First Article machine.

Requirements

• Diploma in any Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• MNC Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• To coordinate Maintenance Activities between Production and Technical department
• Support GCM/SDM MA & MO activities. Support work permit and authorization activities
• Participate in Daily operation and maintenance meetings to support both operation and maintenance activities by keeping status updated with plan
• Coordinates all maintenance activities including safe permit issuance, lockout-tagout preparation, GSAP approval, and supporting relevant parties to effectively complete the maintenance works as needed
• Actively prepare equipment from maintenance phase to commissioning of equipment to ensure the completed jobs function well
• Supports Capital Project/MOC activities in view of blanking, isolation, LOTO and flushing plans are followed to ensure safe handling
• Work closely with the Maintenance engineers on Transition and Turn Around activities from planning stage to commissioning stage
• Prepare markup PIDs covering all the GCM activities to be completed during the transition period for safe and timely start-up
• Coordinate with shift team supervisors to ensure maintenance jobs such as cleaning, washing and technical or in-house contractors follow up jobs are completed before handing over to production
• Support work permitting and work authorization activities
• To perform any other duties or assignments as assigned by superiors

Requirements:

• Diploma/ Degree in relevant field
• Minimum 2-3 years of experience in maintenance planning and coordination

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Location: Beach Rd
• Working days : 6 days ; 8 hours/day
• Salary : $2000 - $3000

Responsibilities:

• Perform general maintenance and repairs on plumbing, electrical.
• Ensure guest rooms are well-maintained, including fixing plumbing, electrical, and furniture issues.
• Conduct regular inspections of hotel facilities to identify potential maintenance problems.
• Respond to emergency repair needs (e.g., burst pipes, electrical outages, power trip, water heater malfunction,promptly.
• Maintain the hotel’s exterior, including landscaping, parking lots, and outdoor lighting.
• Ensure all safety and security systems, including fire alarms, extinguishers, and emergency lights, are functioning.
• Work closely with housekeeping and management to address and resolve maintenance issues.
• Ensure compliance with safety, health, and environmental regulations.
• Maintain an inventory of maintenance supplies and tools.

Requirements:

• Proven experience in hotel or building maintenance .
• Ability to troubleshoot and solve problems quickly.
• Basic knowledge of safety and fire regulations.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.