Be involved in the planning of civil engineering works.

· To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

· Any ad-hoc duties as assigned by the Manager.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

· The Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

· The Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

. Flexible working hours

• Work together to define the project's scope with cross-functional teams that include design, development, and management of objectives and results.
• Create thorough project plans, budgets, and schedules, and make sure that the deadlines are followed.
• Effectively plan and distribute resources to guarantee that project milestones are met on schedule and within budget.
• To overcome project limitations and challenges, identify possible hazards and create mitigation plans.
• Encourage and uphold efficient and transparent channels of communication between team members, clients, and stakeholders to
• Ensure alignment with project objectives and give frequent project updates.
• Oversee and rank several projects at once, making sure that each one's particular needs and timelines are fulfilled.
• Organize frequent status meetings for the project and provide clients and senior management with progress reports.

Qualifications:

• Demonstrated expertise in project engineering or similar positions in the [Oil & Gas / Marine].
• Excellent organizational abilities and a track record of overseeing several projects at once.
• Outstanding writing and vocal communication abilities to successfully communicate both technical and non-technical
• Positivity, adaptability, and resilience in dynamic, fast-paced professional settings.
• Expertise in project management software and technologies.
• The capacity to solve problems, think critically, and make wise choices under duress.
• Collaborative team player has the capacity to collaborate with a variety of teams.

Job Responsibilities:

• Support the QC/QA Manager in daily quality control tasks for Ready Mix Concrete production, including mix design creation, raw material testing, report generation, and addressing customer complaints.
• Ensure all laboratory activities comply with ISO standards, project/site requirements, and internal protocols.
• Develop innovative concrete products and solutions to meet market demands.
• Stay updated with industry trends and innovations to plan QC/QA activities effectively.
• Maintain accurate records of all test data and reports.
• Ensure proper maintenance of laboratory equipment and facilities.
• Assist in maintaining Environmental, Health, and Safety (EHS) standards in the lab.
• Perform additional duties as assigned.

Job Requirements:

• Bachelor’s degree or Polytechnic diploma in Civil Engineering or Building Construction.
• Preferably 3-5 years of experience in the construction industry or a laboratory setting.
• Candidates with less experience will receive appropriate training.

Job Description:

• Analyse the needs of users, design, test and develop the software to meet those needs.
• To provide flexible solutions to integrated applications, to recommend upgrades for existing systems and programs, and to ensure any new product integrations are hassle free.
• Analyse the product requirements and implementation of feasible solutions to meet these requirements
• Ensure continued functionality of a program during maintenance and testing of software
• Document each aspect of a system or application as a reference for future upgrades and maintenance
• Revisit the development process to fix bugs or address client or consumer concerns, supporting existing data patches and enhancements.
• Work with the business analysts and users to ensure policy premiums are calculated as required.

Requirements:

• Minimum 5 years of experience in software development using Java/VP/MS
• Preferbly with experiences in the healthcare/insurance industry with functional knowledge

About our client: Our client is a manufacturer of offshore drilling and production equipment that is well-suited for use in deepwater applications.

About the role:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms, and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensures that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements An Experienced Professional (P2) applies practical knowledge of job area typically obtained through advanced education and work experience.

About you:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum of 2-3 years of experience in quality assurance or quality control, preferably in oil&gas manufacturing sector.
• Strong knowledge of inspection and testing methods and procedures.
• Experience in conducting quality assurance tests and performing statistical analysis.
• Ability to conduct root cause analysis and implement corrective actions.
• Familiarity with quality management systems and documentation requirements.
• Strong problem-solving skills and attention to detail.
• Excellent communication and teamwork abilities.

Other:

• Work location: Tuas (pick-up transport provided)
• Work hours: Monday to Friday (8am to 5.15pm)

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description

- Managing a part of the construction project

- Assist in technical advice and supervision for other members of the staff

- Planning day to day work program of the project progress

- Ensure projects meets agreed specifications, budgets as well as timescales

- Authorizing technical drawings and engineering plans

- Ad-hoc assignments

Job Requirements

- Diploma in civil engineering or equivalent

- Minimum 1 year experience in landed property from start to finish

- Good communications skills

Location: Jurong East

Responsibilities:

• Design and implement ITSM processes, including Incident Management, Change Management, Problem Management, and Service Request Management.
• Administer and support ITSM tools (e.g., BMC, ServiceNow, Jira Service Management) to enhance service delivery and reporting.
• Work with IT and business teams to define service levels, create service catalogues and ensure compliance with service level agreements (SLAs).
• Analyse service performance metrics to identify areas for improvement
• Work with the sales team to understand client requirements and address client's needs.
• Conduct presentations, demos, and workshops to potential clients
• Facilitate training sessions and workshops to promote ITSM best practices and tool usage across the organization.
• Assist in the development and maintenance of ITSM documentation such as process flows and user guides

Job Requirements:

• 2-3 years of experience in Design, Implement or Operations of IT Service Management tools or related role, with a strong focus on ITSM tools and processes.
• ITIL certification or other relevant ITSM tools certifications preferred.
• Proficiency in ITSM platforms such as BMC, ServiceNow, Jira Service Management, or similar tools in deployment and operations.
• Understanding of ITIL (Information Technology Infrastructure Library) frameworks
• Experience with incident, change, and problem management processes.
• Proficiency in using APIs to connect ITSM tools with other applications to streamline workflows and data exchange.
• Familiarity with integrating third-party services or applications that enhance ITSM capabilities (e.g., chatbots for incident reporting).
• Proficiency in scripting languages (e.g., Python, PowerShell) to automate repetitive tasks and enhance ITSM tool functionality.
• Familiarity with automation tools and Ability to design and implement automated workflows
• Experience in project management or agile methodologies.

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Job Description & Requirements

Responsibilities:

· Develop and implement test strategies, test plans, test cases, and test scripts for .NET applications.

· Design and execute automated tests using frameworks such as Unit, xUnit.net, or SpecFlow.

· Perform manual testing as necessary, including functional, integration, regression, and performance testing.

· Identify, record, document, and track bugs to resolution using tools like Azure DevOps, JIRA, or similar.

· Participate in code reviews and provide feedback on code quality from a testing perspective.

Requirements:

· Experience with testing frameworks and tools such as NUnit, xUnit.net, SpecFlow, Selenium WebDriver, Apache JMeter or similar.

· Familiarity with API testing tools like Postman, Swagger.

· Knowledge of database testing techniques and ability to write SQL queries for data validation.

· Excellent problem-solving skills and strong communication skills.

Qualifications:

· Bachelor’s degree in Computer Science, Engineering, or a related field.

· Proven experience as automatic test engineer or similar role

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Recruitment Pte Ltd | EA License No.: 16C7954

Tay Shiong Luan | EA Personnel No.: R23115166

Job Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Provide support to BD manager in generating quotation for molding projects involving new toolings
• Provide customer support and perform in BD activities to direct customers; Serve as primary technical contact with customers on strategic or politically sensitive issues
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Job Requirements:

• Diploma/ Degree in Mechanical Engineering or related
• Minimum 3 years of working experience in project management & production process
• Plastic injection moulding and mould assembly background preferred

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs.

• Maintenance of machines and equipment
• Maintenance of tools, jigs and fixture. Requisition of duplicate tools and scrap of obsolete tools
• Support machine installation, trial run, troubleshooting and repair of machines and equipment
• Support validation in sample preparation, trial run, data collection and testing
• Assist engineer in samples preparation, testing and data collection
• Update work instructions and document records for maintenance and production work
• Administration work (raise requisition forms in purchase, shipping, etc)
• Co-ordinate with suppliers, internal department for maintenance and calibration tasks
• Conduct internal on-the-job training for production operatives
• Participate in audits by internal and external bodies
• Other tasks assigned

Requirements:

• Minimum Nitec in mechanical technology/mechanical or manufacturing engineering
• Min 2-3 years of manufacturing / production technician experience

Office hours, Mon to Fri

Up to $3K

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

IN-HOUSE CLEANERS

=DREAMS (Singapore) Limited is a first-of-its-kind secular, co-ed weekday residential model that provides after-school academic and holistic support to promising and aspiring children from low-income households. It aims to empower them to dream of a future where they are not limited by family circumstances.

We are seeking a highly motivated individual to join our team as In-House Cleaners. This individual will be responsible in maintaining cleanliness and ensuring a safe and pleasant environment to our scholars, visitors and staffs within our residential campus.

Interested candidates may submit their resume to [email protected]

KEY RESPONSIBILITIES

Positive role model

• Be a positive role model for youths from low-income families
• Be respectful
• Willingness to learn and teach the scholars

Maintaining Area Cleanliness

• Washing of common toilets, handicap toilets and shower area to maintain hygiene standards for residential and visitors’ use. Ensure all toilets cleaning supplies are adequately stocked.
• Vacuum all carpeted areas.
• Sweeping, dusting and mopping of building floor areas such as MPH, lift lobbies, corridors and staircases.
• Sweeping, mopping, dusting and wiping of all such as office, meeting rooms, dorm rooms, digital room, security office and laundry room to ensure cleanliness.
• Wiping of all lift panels and glass panels within the campus to ensure they are free of dirt and grime.
• Clearing of rubbish from the common rubbish bins and washing the bin centre surrounding area, rubbish bins and bin chambers.
• Sweeping the outdoor area such as carpark and multipurpose sports courts.
• Carry out monthly heavy cleaning tasks (pressure wash jet spray, clean refrigerators, microwaves, fans, etc.) and ad-hoc special projects.
• Cleaning and packing of cleaning equipment for next day usage.
• Water all plants within the campus.

Maintaining MPH, Kitchen and Pantry

• Assist in preparing drinks/snacks in meeting rooms. Ensure all utensils are washed and drinks/snacks are stocked well.
• Ensuring pantry areas and kitchen are clean and kitchenware and dinnerware are wash and properly kept.
• Ensure MPH is clean and free from any unwanted items.
• Wash all dishcloths for kitchen and pantry regularly.
• Ensure all cleaning supplies/chemicals in kitchen and pantry rooms are well stocked.
• Assist to stocktake pantry items and report to Housemaster when stocks are low.

Administration and Operations

• Ensure that the campus is free from any dangerous/hazardous items.
• Monitor scholar’s behaviours and correct them of any wrongdoings. Report any issues/wrongdoings to Housemaster if need be.
• Assist in teaching the scholars on the proper way of managing cleanliness.
• Assist in managing lost & found items.
• Informing any matters/feedbacks to the Housemaster when necessary.
• Report any damages/faults on equipment and facilities to Housemaster.
• Supporting any =Dreams events and other organisational activities
• Any other ad-hoc duties assigned by the Housemaster.

QUALIFICATIONS

• Proven working experience as a Cleaner.
• Possessed the necessary cleaning certifications.
• Ability to handle heavy equipment and/or operate machinery.
• Knowledge of cleaning chemicals and supplies.
• Good communication and interpersonal skills.
• A strong team player.
• Experience working with children, youth and low-income families

Summary Benefits :

• Basic up $2600 - $3500
• East / North
• Engineering - Electrical

Responsibilities :

• Assist in project coordination, equipment installation arrangement, testing and commissioning
• Assist manager in provide solution to the tasks requested by clients on problem of all Electrical
• Liaise with clients, vendors, contractors and sub-contractors
• Build positive relationship with customers and clients
• Work with internal department for process of project claim, Variable order(if any) etc
• In charge of project hand over to client or maintenance department

Requirements :

• Diploma/Degree in Electrical or relevant engineering is advantage
• Entry Level is welcomed. Training is provided
• Preferably to have Class 3 Driving License
• Candidate with relevant experience will have added advantages

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Our client is a specialized provider in Asia that focuses on delivering unique solutions for welding gases and safety, aiming to enhance operational efficiency and safety practices across various industries.

• Oversee the efficient operation and maintenance of gas supply facilities and associated equipment.
• Develop project designs, estimate costs, and present the results.
• Deliver technical training to staff while assessing materials, subcontractors, and suppliers.
• Ensure adherence to government regulations and respond effectively to emergencies.

Requirements:

• Degree in Mechanical/Electrical/Electronic/Mechatronic Engineering or equivalent.
• At least 2 years of experience with Gas/Medical Gas Systems.
• Proficient in AutoCAD

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Permanent. 5 days. Alternate saturday 4 hr. Jurong

Our client

A very profitable decades old company specialised in machine automation, manufacturing equipment/manufacturing system design, calibration related products

Area of business: Global

Industry served: chemical, pharmaceutical, food

Abt the position:

Involved in full cycle mechanical design machine from conceptualization,designing, testing , commissioning.

Job scope:

1. Meet n discuss with client of the customized technical requirement.

2. To mechanical design n produce fabrication drawings for

(a) Material handling/ feeding / pick and place system, jigs and fixtures. (non static )

( b) Tanks and vessel design.(static)

(c )simple steel structure / process piping design

4. To perform equipment integration

5. To project manage

Requirement:

1. Diploma in Mechanical, Mechatronics Engineering or its equivalent.

2.Min 2 years experience in mechanical design manufacturing automated machine

Added advantage:

Mechanical design customized material handling equipment

whats on offer:

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Work Location: Jurong

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Industry/ Organization Type: Precision Manufacturing
• Position Title: Lead Engineer (Engineering Design department)
• Working Location: Zhuhai, China
• Working Hours: 5 Days, Mon-Fri (8 am-5.30 pm)
• Salary Package: Basic Salary (Up to￥30K) + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Coordinate and align the Engineering teams and resources with the objective of “Design for Manufacturing” to achieve product leadership in the related industry.
• Understand, communicate, and manage the core needs of customers’ design and their requirements.
• Offer cooperation and support on Engineering needs as required by other departments.
• Operate as a team player with the ability to collaborate with other Department Heads in achieving corporate objectives.
• Lead engineering initiatives to ensure product designs are optimized for manufacturing and industry leadership.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Minimum 10 years of relevant working experience in the related industry.
• Excellent communicator with strong organizing and leadership skills.
• Knowledgeable in material substrates such as elastomer (Silicone rubber), plastics and metal.
• Hands-on experience with Pro-E Creo and Unigraphics (NX)/ AutoCAD software.
• Exposure to managing Product Development of component parts relating to Silicone Rubber, Plastics and Metal (any 2 out of 3 required substrates is acceptable) with client’s 2D/ 3D drawings.
• Possess some secondary process and tooling knowledge.
• Good rapport in interfacing and negotiating with local and global customers on Product and Engineering Development.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to anraduscn.researcher01(at)gmail.com. Please indicate #67118 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Summary Benefits :

• Basic up $3000 - $4000
• East
• Engineering - Electrical

Responsibilities :

• Assist in project coordination, equipment installation arrangement, testing and commissioning
• Assist manager in provide solution to the tasks requested by clients on problem of all Electrical
• Liaise with clients, vendors, contractors and sub-contractors
• Build positive relationship with customers and clients
• Work with internal department for process of project claim, Variable order(if any) etc
• In charge of project hand over to client or maintenance department

Requirements :

• Diploma/Degree in Electrical or relevant engineering is advantage
• Preferably 2 years of relevant work experience
• Class 3 Driving License needed
• Candidate with relevant experience will have added advantages

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

• Singapore Based (Tanjong Pagar)
• 5 Days (Based on Roster)
• Salary: $3,000-$3,500
• 2 years of relevant experience; Assist the Front Office Manager and Assistant Front Office Manager.
• Career Progression Opportunities

Job Description

• To assist the Front Office Manager and Assistant Front Office Manager to supervise and coordinate the daily front desk operations.
• To be proactive thinking, to be able to react fast to problems, and to make sound management decisions.
• Able to show responsibility and make decisions to handle any operations issues that may arise in the absence of the management.
• To welcome and bid farewell to all VIP guests.
• To develop and maintain close business contacts with house guests and provide personalized service whenever possible.
• To handle complaints or incidents/accidents occurring in the hotel when necessary.
• Record all complaints into logbook for management and all departments' attention or follow up.
• Respond to emergency calls, fire alarm, power failure, computer and medical attention and coordinate with respective departments and contacts.
• Be familiar with and ensure that all preparations for VIP and group arrivals and departures are well organized.

Job Requirements

• Minimum 2 years of relevant experience

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position : Customer Service Executive

• Location: Changi
• Working days: 5 days (8am - 5.45pm)
• Salary: $2,300 - $ 2,800

Requirements:

• Min 1-2 years of experience in parts management within the music instrument industry.
• Proficient computing skills and familiarity with relevant software and systems.
• Knowledge of musical instruments is highly desirable, enhancing your ability to provide expert support.

Key Responsibilities:

• Respond promptly to customer inquiries via phone, email, and online chat, delivering accurate and helpful information.
• Administrative tasks for piano technicians, including scheduling appointments and maintaining accurate documentation.
• Provide customer service to walk-in clients, and handle cashiering duties.
• Proactively follow up with relevant departments on billing matters to ensure accurate and timely resolution.
• Manage spare parts inventory efficiently, ensuring timely ordering and precise tracking to maintain seamless operations.
• Perform various administrative duties, including data entry, filing, and document management, to support the smooth operation of the customer service department.
• Perform any other duties as assigned.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279