5days ,permanent, Aljunied

Product

Heating , ventilation, air conditioning (Hvac)solution for data center

Our client

MNC in air conditioning and humidification system solution serving high tech industry

Years in business : > 70 years worldwide

Area of business: Global

Job scope

· To design and draw HVAC solutions, to perform heat load calculations for clients.

· To visit site and attend to meetings with clients

· Submission of project specifications and certifications for client's approval.

· Sourcing of competitively priced equipment for the project

· To see through successful completion of project from inception to commissioning.

Requirements

· Min Diploma in Electrical/Mechanical/Electronic

· 2Years experience in HVAC design, installation ,commissioning works.

· 2 years experience in data center hvac project management

· Proficient in Auto-cad interpretation of job site drawings.

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Mechanical Engineer (Assembly)
• Working Location: Woodlands
• Working Hours: 5 days (Monday to Friday, 8.30 am – 5.30 pm)
• Salary Package: Basic up to $3500 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assemble, debug, and test-run customized modular machines.
• Handle the commissioning of these machines.
• Provide technical support at customer locations to ensure proper equipment operation.
• Implement design improvements to simplify designs, reduce parts, and use cost-effective alternatives, while maintaining or enhancing product performance.
• Procure or assist in procuring necessary items to perform the above duties effectively.
• Write and maintain all required documentation, including work and assembly instructions, as well as manufacturing and test procedures.

APPLY NOW!!!

• Nitec, Higher Nitec, or Diploma in Mechanical Engineering with 2 to 3 years of relevant industry experience.
• Knowledge of industrial automation, jigs, fixture design, FMEA, SPC, and CAD as well as experience in machine design are added advantages.
• Ability to work independently with minimal supervision.
• Willingness to travel as required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67302 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Data Framework Engineer

Expected Years of Experience: 8-10 years

SCOPE OF THE ROLE

You will be responsible for the end-to-end software development and support for all work related to projects, quarterly change requests, L3 production fixes. This includes software product implementation and administration, application design, development, implementation, testing and support.

You will also be responsible for quality assurance of the team’s delivery in conformance with the Bank-defined software delivery methodology and tools. You will partner with other technology functions to help deliver required technology solutions.

Other responsibilities include:

- Create frameworks, technical features which helps in faster operationalisation of Data models, Analytical models (including AI/ML) and user generated contents (dashboards, reports etc)

- Effectively partner with data scientists in enabling faster adoption of AL/ML model based systems

- Independently install, customise and integrate software packages and programs

- Carry out POCs involving new data technologies

- Design and develop application frameworks for data integration

- Create technical documents such as solution design, program specifications for target solutions

- Perform design and development of applications which may not be limited to: Software Applications, Data Integration, User Interfaces, Automation

- Maintain and recommend software improvements to ensure a platform centric management of software applications

- Performance tuning

- Work with production support team members to conduct root cause analysis of issues, review new and existing code and/or perform unit testing

- Perform tasks as part of a cross functional development team using agile or other methodologies and utilising project management software

Technical skillsets

TEAM Architecture (Big Data)

- 8+ years of experience with application development in Big Data Ecosystem (such as Cloudera, ElasticSearch, Spark, Presto, Hive, Impala, Kibana, Logstash, Hbase, Kafka),

- Expertise in building applications using Java, Scala, Python, Shell scripting

- Experience in large scale implementations and performance optimizations in the Big Data Ecosystem using Spark, Hive, Impala, Apache Kudu, Ozone, Presto, Tez, Iceberg etc

- Knowledge of frameworks such as Spring, Struts, Hibernate etc

- Knowledge of Object Oriented Programming, Multi-threading, Containerization, etc

- Knowledge of related technologies such as HTML, Javascript, CSS, React, Jquery, node.js, docker

- Knowledge of Elastic, Kibana, Logstash, Hive, Sqoop, MongoDB, Oozie, Flume, Kafka

- Expertise in integrating applications with Devops tools

- Knowledge of building applications on MPP appliances such as Teradata, Greenplum, Netezza is a plus

At least, 2 to 3 technical certifications in any of the below technologies:

1. Language – SQL, Java, Python, Scala, Javascript, node.js
2. Automation / scripting – CtrlM, Shell Scripting, Groovy
3. Cloudera Hadoop distribution – Hive, Impala, Spark, Kudo, Kafka, Flume

Additional Experience required for all teams to create an added advantage:

1. CI/CD software, Testing Tools - Jenkins, SonarQube
2. Version Control Tool - Aldon+LMe, CA Endeavor
3. Deployment Tool kit -Jenkins
4. Service or Incident Management (IcM) Tools - Remedy
5. Source Code Repository Tool - Bitbucket
6. Scheduling Tool - Control-M
7. Defect Management Tool - JIRA
8. Application Testing tool – QuerySurge
9. Cloud certification
10. Platforms provided by FICO, Experian, SAS for credit and portfolio management

EDUCATION

- Bachelor’s degree/University degree in Computer Science, Engineering, or equivalent experience

Job Description

• Industry/ Organization Type: Manufacturing (Electronics)
• Position Title: Regional Technical Engineer (APAC) / IT Support Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 9 AM – 6 PM)
• Salary Package: Basic Salary up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to the sales team and customers for Proof of Concept (PoC), project deployment, post-sales support, and internal simulation testing.
• Study system and product technical details to offer technical advice or support to customers and the sales team.
• Evaluate product specifications to improve system performance.
• Communicate with HQ programmers about customized software functionality requirements or 3rd party software integration (API) details.
• Build and maintain strong relationships with customers.
• Offer troubleshooting assistance to customers from the office or on-site.
• Manage demo products and maintain the filing of technical information.
• Set up and manage demo equipment for tradeshows.
• Monitor customer satisfaction to ensure outstanding customer value.
• Develop and maintain technical competence in company products, applications, and services.
• Create technical information such as datasheets, manuals, and training materials.
• Conduct technical presentations or training for customers.
• Assist in overall company operations for self-development toward a managerial position.
• Provide timely updates through the Vaxtor Project/PoC Management tool.
• Any ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma in IT, Computer Engineering or Electronics, or equivalent
• Minimum 2-3 years of relevant experience in the electronics industry
• Knowledge of ANPR software and Intelligent Traffic System will have an advantage
• Experience with OCR, Computer Vision, Machine Learning and AI technologies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

About this role

To report to project manager for the M&E facilities maintenance projects

Job cope

Tender

To prepare tender for M&E facilities maintenance project

Pre project

Develops project objectives by understanding project requirement.

To plan project phases and manpower allocation.

To Determines project specifications by understanding customer technical and non-technical requirements and mandatory performance standards.

To prepare estimated project costing.

Project implementation

To understand project plan and specifications, time requirements n another project element and prepare project schedule

To monitor project progress

To Controls project plan by ad hoc review

To Controls project costs

To report to project director of project status reports by summarizing key information and recommend actions.

Requirement

· Diploma in M&E Engineering or equivalent.

· 3 relevant experiences in M&E works.

· 3 years M&E facilities operation project in large commercial building or education institution Construction industry

· 3 years M&E project management

Work location :Paya Labar

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

For better response, pls apply via job page

https://recruitmentalliance.zohorecruit.com/jobs/Careers

click job opening, click relevant position

We regret that only shortlisted candidates will be notified

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

People Management & Resource Allocation:

• Lead and manage both roving and residential maintenance teams.
• Schedule and allocate resources based on Service Level Agreements (SLAs).

Installation and Configuration:

• Supervise Installation, configuration, and testing of AV, CCTV and Card Access Control related systems per project specifications and industry standards.
• Collaborate with project teams to ensure seamless integration of systems within client environments. Troubleshooting and Maintenance:
• Diagnose and resolve issues related to AV, CCTV cameras, recorders, and access control devices promptly.
• Conduct routine maintenance and system checks to ensure continuous functionality.

Quality Assurance:

• Perform quality checks on installations to guarantee compliance with company standards and client requirements.
• Document and report any discrepancies or issues observed during installations or maintenance activities.

Client Interaction:

• Interact with clients to understand their security needs and provide technical support.
• Offer training to end-users on the proper use and maintenance of security systems.

Collaboration:

• Work closely with project managers, fellow technicians, and other stakeholders to coordinate activities and meet project deadlines.
• Provide feedback to enhance the efficiency of security system installations and maintenance procedures.

Documentation:

• Maintain accurate records of installations, configurations, and maintenance activities.
• Create and update documentation for standard operating procedures and troubleshooting guides. Upgrades and Enhancements:
• Stay informed about industry trends and technology advancements in CCTV and Access Control systems.
• Propose system upgrades or enhancements to meet evolving security requirements.

Service Level Support:

• Be ready to take on maintenance tasks when assigned or rostered as part of a 24/7 standby team.

Requirements

• Higher NITEC/ Diploma or equivalent; technical certifications in AV, CCTV and Access Control systems are highly desirable.
• Minimum of 3 years of hands-on experience in the installation and maintenance of CCTV and Card Access Control systems.
• Proficient in the installation and configuration of CCTV cameras, NVRs, DVRs, and Access Control devices.
• Knowledge of network protocols and security principles related to security systems.
• Familiarity with various CCTV and Access Control brands and models such as Genetec, Milestone, Hikvision, Hanwha, HID etc
• Excellent communication and interpersonal skills to interact with clients and team members effectively.
• Strong analytical and problem-solving abilities to troubleshoot and resolve technical issues.
• Exceptional attention to detail and a commitment to delivering high-quality work.
• Ability to lift and carry equipment weighing up to [15kg] and work in various physical environments.

Khaty Zainal

R22111204

BGC Group Pte Ltd(Outsourcing)

EA 05C3053

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

General Overview

This position is part of the Instrument, Control and Electrical (ICE) team that provides maintenance and technical support to the Operations and Project teams in the LNG Terminal. This position is responsible for ensuring the overall technical integrity of the Terminal from the electrical discipline perspective.

Roles and ResponsibilIties

The incumbent shall be responsible for, but not limited to, the following scope of tasks and duties:

• Lead and supervise maintenance tasks and reliability improvements of electrical equipment and systems within the Gas Engine Generator (GEG) area
• Implement reliability programs and develop maintenance procedures for electrical equipment to facilitate consistent execution of maintenance tasks
• Develop and carry out minor CAPEX electrical projects following company guidelines
• Investigate electrical equipment failures or malfunctions in order to identify root causes of problem as well as recommend and implement solutions
• Liaise with external stakeholder including government agencies on electrical matters
• Support Major expansion projects from the electrical and operations perspective
• Work closely with Licensed Electrical Worker to provide integrity assurance for the electrical systems.
• The incumbent shall also participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of five (5) years practical experience in an electrical maintenance / design role in an oil and petrochemical facilities or power generation environment.
• Relevant technical experience in high voltage electrical power systems.

In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Strong interpersonal, written and verbal communication skills

Education

• Bachelor Degree in Electrical and Electronic Engineering from a recognized university.

Job Description :

• Ability to lead the Project Team to achieve excellence in the project.
• Plan and manage project schedule to ensure project completion according to schedule
• Monitor compliance of work with workplace safety and health regulations.
• In charge of safety, quality and environmental matters.
• Carryout investigation of faults and failures.
• Making plans using detailed drawings
• Creating accurate project specifications
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Manage few teams of supervisor and coordinators for daily work activities.
• Prepare site record and submit to office in a timely manner.
• Undertake ad-hoc duties as assigned by the management.

Requirements :

• Preferably with class 3 driving license
• At least 10 years of working experience in the related field.
• Willing to work at mutilple job site , 6 days work

Job Responsibilities:

• Lead and manage a team of Service Desk technicians, providing guidance, support, and mentorship to ensure high performance and job satisfaction.
• Oversee day-to-day operations of the Asia Service Desk, including ticket management, prioritization and escalation processes.
• Monitor service levels and performance metrics to identify areas for improvement and implement strategies to enhance efficiency and customer satisfaction.
• Collaborate with other IT teams and departments to resolve complex technical issues and ensure seamless service delivery.
• Develop and maintain service desk and technical procedures, documentation, and knowledge base to facilitate efficient problem resolution and training.
• Conduct regular performance evaluations, provide constructive feedback, and identify training and development needs for team members.
• Stay up to date with emerging technologies, industry trends, and best practices in IT service management. Perform regular IT audits of processes to discover areas of weaknesses and fortify them.
• Collaborate with Infrastructure on device deployment and ensure change management is followed to minimize risk to the business.

Qualifications:

• Minimum NITEC in any discipline
• Minimum of 2 years of experience in IT support, with 1 year in a leadership or supervisory role.
• Proven experience in managing and motivating a team to achieve performance targets and deliver high-quality customer service.
• Comfortable to work in a healthcare environment.

Primary Responsibilities:

• Provide professional, courteous, and efficient level of service to all internal and external guests in line with the Standard Operating Procedures.
• Ensuring a high level of liaison is maintained between front office and all other departments within the hotel.
• GSTL must always project a professional, business-like appearance by adhering to the uniform and personal hygiene guidelines. Portrays as a role model, assisting Assistant Guest Relations Manager to train and drive the culture of the team along with the Company’s Core Values.
• Allocating the room assignment, reviewing of arrival, VIP’s, amenities, and special requests.
• Coordinate and communicate with relevant departments to ensure all preference and special request are met.
• To provide supervision, direction, and management of room’s inventory for the Front Office with the objective of ensuring room types of preferences and accommodation is made available upon guest arrival.
• Deliver a level of personalised service that exceeds not only the expectation of the guests but will add a point of difference from the service provided anywhere else within the Serviced Suites.
• A competent working knowledge of the property management systems (PMS) and Standard operating process are required in performing Front Office tasks, processes, and systems such as registration, cashiering and room assignment while adhere to all company credit policies to ensure that all revenue expected will be received.
• Coordinate rooms related site inspections required by Sales. Monitors the ‘Manual Hold’ and ‘Work Order’ rooms.
• Presence in the guest area during high traffic times to assist the front office employees and to ensure smooth operations.
• To handle guest complains and feedback, and action on necessary steps for service recovery.
• Ensure that DM log is accurately updated.
• To monitor daily and monthly enrollment DISCOVERY Loyalty Program, guest benefits, points submission (if required)
• To check and verify Guest Service Ambassador cashiering and due out at end of every shift in accordance to set forth guidelines and ensure all cash floats are intact.
• Necessary reports must be completed and signed.
• To monitor due out rooms for the day (Departure Report by time) and ensure is cleared by end of the shift.
• Work closely with the Housekeeping Team to ensure discrepancies are identified.
• Train and develop team to the highest possible extend.
• Ensures that trainings are provided for technical, hospitality, communication, management, and organizational skills.
• Assist in orientation and training of new hires.
• To undertake any other tasks and assignments assigned by the Assistant Guest Relations Manager and Operations Manager.
• Ensure efficiency and the maintenance of operational readiness of equipment and supplies.
• To maintain the overall cleanliness of the Front Office, Lobby, Pacific Lounge and Living Room.
• Plan, organize, coordinate quarterly activities for guest and recommend ideas to enhance guest stay experience.
• To continuously strive and monitor Front Office objectives such as TripAdvisor and TrustYou.
• Process Food and Beverage knowledge and skills to facilitate Pacific Lounge operations during breakfast operations.
• Preforming of office duties such as associate work schedules and timesheets and monthly reports.

Other Responsibilities:

• Ensure that all Key Policies of are enforced and adhered to.
• To enforce and comply with Rules and Regulations stipulated in the Employee handbook.
• To perform other duties assigned by the Management from time to time.
• Attend Workplace Safety and Health meeting as deemed suitable by the management

Responsibilities:

• Monitor commercial pipelines daily for new and upcoming robot deployments.
• Allocation of Service Engineers for deployment processes and adjust resource allocation as needed.
• Coordinate customer User Acceptance Tests (UAT) and manage UAT documentation.
• Organize customer training on robot handling and software platforms, including logistics.
• Preparation of necessary documentation prior to robot live operations on customer sites.
• Compile Product Performance Reports for customers on a regular basis.
• Allocate Service Engineers for routine Robot Preventive Maintenance.
• Monitor and escalate open Robot Issues to ensure timely resolution.
• Maintain accurate records of customer requests, robot performance, and issue resolutions in a ticketing system.
• Collaborate with team members to maintain an updated deployment schedule.
• Ensure timely execution and reporting of onsite activities, including issue resolution and preventive maintenance.
• Assist in the preparation of purchase order documents for robotics equipment, supplies, and services.
• Contribute to and maintain an organized system for customer support documentation, including FAQs, user guides, and troubleshooting guides.
• Undertake ad-hoc duties as required to support robot operations, including coordinating deliveries and providing operational support.

Requirements:

• Required: Diploma in engineering, business administration, or a related field.
• Preferred: 2 years of experience in project coordination, operations management, or a similar role (fresh graduates may apply).
• Strong organizational and multitasking abilities, capable of managing multiple operational tasks concurrently.
• Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams and stakeholders.
• Ability to thrive in a fast-paced and dynamic work environment.

Responsibilities:

• To manage & oversee overall F&B operation & inventories
• To upkeep cafe housekeeping, general cleanliness and hygiene
• To assist in taking care of cafe cats including grooming, feeding & cleaning
• To assist in customer service & orientation
• To assist in preparing, serving of food/beverages & cashiering
• Other ad-hoc duties required

Requirements:

• Comfortable with cats & able to recognize cat’s behaviour & handling practices
• Committed, responsible & well-spoken individual
• Proactive & detail-oriented
• Service-oriented, self-motivated & a good team player
• Must be comfortable meeting & interacting with people
• Willing to learn & pick up new skills for self-development
• Able to work 6 days weekly including weekends & public holidays
• Candidates to have at least 1 year of working experiences in vet clinics, animal shelters, cats or F&B related environment
• Food Hygiene Cert or barista/coffee skills is a bonus

1. JOB DESCRIPTION

Process Invoicing, delivery order, proforma invoice, packing list and other related documentations

Data entry on job related information into System

Coordinate with planners and customers on daily basis for schedules and shipment- Logistic/courier documentations & arrangement.

Update customer forecast and generate report-

Other responsibilities as requested by superior or top management.

Position summary statement:

Guest Service Team Leader (GSTL) works as a supervisor role of front office to manage all aspects of the front office, back office, and Pacific Lounge functions, in accordance with Pan Pacific Service Suites standards. He/she is responsible for increasing overall guests stay experience. He/she is portray as a role model, assisting Assistant Guest Relations Manager to train and drive the culture of the team along with the Company’s Core Values.

Responsible in meeting guest needs and exceed guest expectations. Addressing and rectifying guest concerns and complaints, and perform office duties such as associate work schedules, monthly reports, and coordinates with other departments. A competent working knowledge of the property management systems (PMS) and Standard operating process are required. GSTL is responsible of mentoring and coaching junior associates.

Primary Responsibilities:

• Provide professional, courteous, and efficient level of service to all internal and external guests in line with the Standard Operating Procedures.
• Ensuring a high level of liaison is maintained between front office and all other departments within the hotel.
• Deliver a level of personalised service that exceeds not only the expectation of the guests but will add a point of difference from the service provided anywhere else within the Serviced Suites.
• GSTL must always project a professional, business-like appearance by adhering to the uniform and personal hygiene guidelines. Portrays as a role model, assisting Assistant Guest Relations Manager to train and drive the culture of the team along with the Company’s Core Values.
• Allocating the room assignment, reviewing of arrival, VIP’s, amenities, and special requests. Coordinates and communicate with relevant departments to ensure all preference and special request are met.
• To provide supervision, direction, and management of room’s inventory for the Front Office with the objective of ensuring room types of preferences and accommodation is made available upon guest arrival.
• A competent working knowledge of the property management systems (PMS) and Standard operating process are required in performing Front Office tasks, processes, and systems such as registration, cashiering and room assignment while adhere to all company credit policies to ensure that all revenue expected will be received.
• Coordinate rooms related site inspections required by Sales. Monitors the ‘Manual Hold’ and ‘Work Order’ rooms.
• Presence in the guest area during high traffic times to assist the front office employees and to ensure smooth operations.
• To handle guest complains and feedback, and action on necessary steps for service recovery.
• Ensure that DM log is accurately updated.
• To monitor daily and monthly enrollment DISCOVERY Loyalty Program, guest benefits, points submission (if required)
• To check and verify Guest Service Ambassador cashiering and due out at end of every shift in accordance to set forth guidelines and ensure all cash floats are intact.
• Necessary reports must be completed and signed.
• To monitor due out rooms for the day (Departure Report by time) and ensure is cleared by end of the shift.
• Work closely with the Housekeeping Team to ensure discrepancies are identified.
• Train and develop team to the highest possible extend. Ensures that trainings are provided for technical, hospitality, communication, management, and organizational skills.
• Assist in orientation and training of new hires.
• To undertake any other tasks and assignments assigned by the Assistant Guest Relations Manager and Operations Manager.
• Ensure efficiency and the maintenance of operational readiness of equipment and supplies.
• To maintain the overall cleanliness of the Front Office, Lobby, Pacific Lounge and Living Room.
• Plan, organize, coordinate quarterly activities for guest and recommend ideas to enhance guest stay experience.
• To continuously strive and monitor Front Office objectives such as TripAdvisor and TrustYou.
• Process Food and Beverage knowledge and skills to facilitate Pacific Lounge operations during breakfast operations.
• Preforming of office duties such as associate work schedules and timesheets and monthly reports.

Requirement:

• Minimum 3 years experience as a Senior position in Front office preferably from a Deluxe Premier Hotel or Serviced Apartment.
• Has excellent background in guest or customer service.

Responsibilities:

· Greet customers and hand out menus.

· Take meal and beverage orders from customers and place these orders in the kitchen.

· Give menu recommendations and inform patrons of any specials.

· Deliver meals and beverages to tables when they have been prepared.

· Check that customers are satisfied with their meal.

· Prepare the bill for tables when requested.

· Cash up bills and ensure that the correct amount has been paid.

· Administer change to tables if needed.

Requirements:

· Endurance to walk and stand for long hours.

· Flexible work hours.

· Ability to remain calm and professional with difficult customers.

· Excellent interpersonal skills.

· Coordination to carry plates or trays without dropping anything.

· Able to work on weekend and public holiday.

☑ MNC - Medical Device & Equipment Manufacturer

☑ Basic $ 2800 - $4000 + Transport Allowances $350 - $1050 + OT + Standby Allowance + Bonus

☑ 5 Days, Flexi Hours - Required to standby once a month

☑ Location: Island-wide (Parking & ERP Fully Claimable)

☑ Good Benefits & Career Prospect

Responsibilities:

• Install, maintain, and troubleshoot medical imaging equipment.
• Prepare service reports, process orders, and maintain accurate records.
• Build strong relationships with clients and ensure their satisfaction.
• Develop technical skills and stay updated on industry advancements.
• Work independently, collaborate with team members, and maintain a positive attitude.

Requirements:

• Strong foundation in electrical, electronic, computer hardware, and networking.
• 1-3 years of experience in the medical device industry or engineering field preferred.
• Open to both experienced professionals and entry-level.
• Willingness to work night shifts and travel required.

Remuneration will be commensurate with experience and qualifications.

Only shortlisted candidate will be notified.

Yang Hui Shan (Sherri)

EA Reg No.: R22106683

• ITE Certificate in Electrical / Electronic Engineering.
• Preferably able to start immediately.
• Experience in repair / maintenance of electronic equipment.
• Able to work on site to keep electrical and electronic equipment running smoothly.

Candidates are to submit resume by email to : [email protected]

SUMMARY:

The 1st level remote support is required to provide 1st level troubleshooting to users’ queries/incidents received

Responsibilities:

• Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded promptly
• Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions
• Furnish and submit timely updates to customers on the status of outstanding issues within the targeted Service Level
• Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.
• Manage customer expectations and notify the Team Lead in the event of unusual surge in calls of a specific nature
• Handle initial classification/prioritization of the incidents. Track the progress of resolution and provide regular updates for follow up actions and incident status.

Requirements:

• Diploma in IT-related fields
• Minimum 1-year End-User Support Experience, Desktop or Technical Service Desk.
• Knowledge of Windows OS, Active Directory Account Administration, MS Outlook, and mobile device support

Core Rotating 8.5hr staggered

• Monday to Friday: 8.5hrs
  1. Day Shift: 01.00PM – 10.30PM, with dinner break
  2. Night Shift: 10.30PM – 08.00AM with night snack/supper break

Customer Service Executive - Full Time

We're looking for a meticulous and independent individual to join our team.

You will be in charge of attending to customer's emails

• Reply to all online enquiries and is responsible for efficient, prompt and thoughtful response to customers.
• Handle and resolve customers' complaints, provide appropriate solutions, and follow up to ensure resolution.
• Process exchanges, returns and issue credits
• Uphold efficiency and customer satisfaction.
• Handle and process customer's exchanges and returns efficiently.

Some traits that we are looking for:

• Positive with a willing to learn attitude
• Strong communication & interpersonal skills
• Customer-orientated and passionate
• Ability to solve issues efficiently
• Has a high level of professionalism, work ethics and honesty
• Meticulous

Requirements:

• A strong interest in fashion
• Good command of English
• Min education: Diploma
• Basic Excel Skills required
• Able to work independently
• Minimum commitment of one year
• Only Singaporeans or Perm Residents
• May be required to work on weekends

How to apply:

Send your application to: [email protected]

In line with our mission to create financial independence for Persons with Disabilities through sustainable employment, we have set up an outsourced contact centre cum training hub to equip them with employable skills and consequently employment opportunities.

We are currently looking for Customer Service Associates who are passionate in working alongside persons with disabilities to deliver seamless user experience to our customers.

Responsibilities

• Provide optimal customer experience over the phone
• Handle email enquiries and live chats in accordance with Service Level Agreement
• Follow up on outstanding cases in a timely manner
• Provide feedback to the Team Lead on issues for improvement

Requirements

• At least an ‘O’ Level/’N’ Level/Nitec certification from a recognised educational institution
• Preferably with 2-3 years of customer service experience in a call centre environment
• Comfortable to work rotating shift hours, including weekends and public holidays
• Strong communication and interpersonal skills
• Passionate in working with person with disabilities
• Persons with disabilities are welcome to apply