• Marine Service Engineer
• Office location : Boon Lay Way
• Working Location: On board ship
• Working days: 5 days (Mon- Friday)
• Working hours : 8am - 5pm
• Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Work experience in Process Instrumentation is a plus
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

• Marine Service Engineer
• Office location : Boon Lay Way
• Working Location: On board ship
• Working days: 5 days (Mon- Friday)
• Working hours : 8am - 5pm
• Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Service Engineer

Location: Tuas (Company pick up available - West & North)

Salary: $3,000 - $4,000 + OT + AWS + Performance bonus

Working days: Monday - Friday

Working hours: 8:30am – 4.30pm

Our client is one of the world's largest manufacturers of hydraulic mobile cranes, and it has a wide product range.

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Carry out on-site or remote support activities and close service calls
• Support system warranty standby
• Install a highly automated high vacuum CVD/PVD systems in a cleanroom environment
• Carry out quality installation, Preventive Maintenance (PM) according to schedule
• Participate and manage the new product release process as required
• Initiate, identify and participate in internal processes re-engineering projects
• Make timely reporting of issues and problems

skills & experience required

• Bachelor’s degree / Diploma in electrical / electronics / mechanical engineering or equivalent
• Min 1 year / intern experience in installation & troubleshooting of equipment in a cleanroom environment
• Understand / hands on with ALD / CVD / PVD systems/ sputtering / semiconductor / capital equipment
• Ability to build and maintain good relationship with customers
• Familiar with high complexity low volume environment
• Customer-oriented mentality and excellent client servicing skills
• Willing to work in north area of Singapore (Yishun / Woodlands / Sembawang)
• Training given to candidate with no experience

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

Job Description:
As a Service Engineer, you will be responsible for ensuring that our equipment is efficiently maintained, installed, and serviced. This role requires close collaboration with our clients, offering technical support and hands-on troubleshooting to meet their requirements.

Key Responsibilities:

• Provide support, installation, commissioning, troubleshooting, repairing and preventive maintenance for equipment.
• Communicate with suppliers, peers, and customers (business units and manufacturing sites) to accurately relay technical information.
• Response to customers’ requests by troubleshooting problems and take corrective actions within targeted timeline.
• Provide technical training and support to client staff as necessary.
• Maintain accurate service records and documentation for all client visits.
• Managing spare parts inventory.
• Practices good health and safe workplace.

Requirements:

• Degree in any engineering studies.
• Min 1 or 2 Years of relevant experience
• Exp in Semiconductor Industry / handling Semiconductor equipment will be added advantages
• Assembly exp will be added advantages
• Strong troubleshooting and problem-solving skills.
• Ability to work independently and communicate effectively with clients.
• Bilingual (Chinese & English) to liaise with Chinese speaking associate.

Interested candidate please click “QUICK APPLY” or forward a copy of your resume to [email protected]

HR in-charge: KC Cheah

• Performs inspections, testing and troubleshooting on electrical & mechanical of marine hydraulic systems.
• Performs preventive maintenance procedures on equipment.
• Carry out repairs on various marine products, both mechanical & electrical systems on Marine and offshore installations.
• Prepare reports from attended jobs.
• Participate in vessel dockings and work at shipyards.
• Adhoc duties as assigned.

Requirements:

• Diploma in Mechanical/ Electrical or Marine Engineering.
• Knowledge in PLC based control systems and/or Hydraulic systems.
• Automation or instrumentation experience an advantage
• Prefer 2-3 years of experience in Marine Hydralius System.
• Possess good initiative, customer oriented and action oriented.

West/Tuas Area (Tpt Pick up at CCK MRT /Boon Lay Mrt)

5 days work week

European MNC

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

· Carry out in-house maintenance duties (including maintenance and repairs to building

fabrics and troubleshoot fire protection system)

· Check and fix mechanical and electrical installations in large office building

· Carry out routine and preventive mechanical and electrical maintenance in the buildings

· Supervise contractors for repair and maintenance works

· Respond and attend to tenant/ user requests

· Familiar with Building Automation System

· To test and service fire alarm systems

Job Responsibilities:

· Greet guests warmly and welcome them to the restaurant.

· Present menus, make recommendations, and take accurate food and drink orders.

· Serve food and beverages promptly and courteously.

· Clear and reset tables after guests have finished dining.

· Respond to guest inquiries and requests in a timely and polite manner.

· Process bills and handle payments accurately at the counter.

· Maintain cleanliness and organization in the dining area.

· Adhere to health and safety standards to ensure a safe dining environment.

· Collect guest feedback and report to management to improve service quality.

· Collaborate with kitchen and other staff to ensure smooth service operations.

· Other ad-hoc duties/ projects assigned by Director or Chef.

Requirements:

· Previous experience in a restaurant or hospitality environment is preferred but not mandatory.

· Strong communication and interpersonal skills.

· Ability to work efficiently in a fast-paced environment.

· Excellent customer service skills with a positive attitude.

· Flexibility to work shifts, including evenings, weekends, and public holidays.

· Team player with the ability to collaborate effectively with others.

Responsibilities:

• Assist the management with daily operational matters
• Motivate team members and maintain a high level of team cohesiveness
• Ensure staff adhere to company SOP
• Support the daily operation in collaboration with the managers, assist with monthly forecasting, weekly schedule, restaurant profitability evaluation etc.
• Plan routine cleaning of the outlet
• Routine inventory stock checking
• Maintain Food Hygiene and Safety Standards
• Execution of maintenance schedule for equipment and perform routine inspections
• Able to resolve any service disruptions or customer complaints
• Able to demonstrate excellent communication and interpersonal skills
• Responsible for the preparation work of outlet opening and closing during operation hours

Requirements:

• A minimum of 2 year of relevant experience in KTV/Restaurant Service/Retail or equivalent
• At least a Certificate in Food & Beverage service
• Great communication skills
• Able to commit shift work, weekends and public holidays

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Roles & Responsibilities:· Assist Project Manager in monitoring and managing the day-to-day operation of projects· Analyzing technical drawings, interpreting specifications, and determining the electrical requirements of a given project.· Reviewing all engineering design plans to ensure compliance with project goals.· Attend meetings with owner/client/contractors/subcontractors on project related matters.· Ensure compliance with local codes, regulations, and safety standards· Check and raise technical queries to resolve the discrepancies between drawings as well as those arisen during project execution.· Ensuring health and safety codes are obeyed at all times.· Ensuring all deadlines and budgetary requirements are met.Job Requirement:· Diploma or Bachelor’s degree in electrical engineering or a similar field.· Minimum 5 years working experience in the related field within the built environment· Proficiency with CAD software and MS Office.· Excellent time management and diagnostic skills.· Strong communication and interpersonal skills

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

Need to have engineering knowledge, comprehension of technical documents. Excellent written and spoken communication skills • Possess troubleshooting skills in engineering works • Proven leadership skills with a large and diverse workforce o Be able to work in a fast-moving environment, under pressure and long working hours, when needed.

We are looking for an energetic, trustworthy, and self-starter candidate who could be handy in paperwork preparation and supervision at the worksite, overseeing projects, maintaining safety protocols, and implementing site procedures. Our ideal candidate is experienced, responsible, and team-focused.

Engineer

Responsibilities;

1)Site survey, quotation preparation, construction quality and safety management, budget control

2)Negotiation of quotations with supplier/subcontractors

3)Ability to use Excel calculation software

4)Check site installation work against approved drawings. Supervise, schedule/plan monitor and inspect the works progress on ACMV duct, pipe and Electrical works

5)T&C of M&E system

6)Attend/Conduct Tool Box/Work arrangement Meeting at site.

7)Co-ordination works with Civil contractor and sub-contractor workers to housekeep, protection and storage of equipment, materials, tools and etc.

8)Perform other duties as assigned.

Requirement;

· Diploma or Degree in Electrical / Mechanical Engineering or equivalent.

· Experienced or Entry Level candidates are welcome to apply (On Job Training will be provided)

· The candidate will assist and support the Project Manager/Engineer in handling and monitoring the progress of projects.

Project Engineer Job Description

We are looking for a dedicated project engineer to assist with the scheduling, planning, forecasting, resourcing, and managing technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

To be a successful project engineer, you should have the ability to work with multiple discipline projects and demonstrate excellent project management and supervision skills. You should also have excellent organizational, time management, leadership, and decision-making skills.

Project Engineer Responsibilities:

Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.

Formulating project parameters and assigning responsibilities to the most capable

employees and monitoring the project team.

Interacting with clients, interpreting their needs and requirements, and representing them in the field.

Performing quality control tasks on budgets, schedules, plans, and personnel performance and reporting on the project's status.

Cooperating and communicating with the project manager and other project participants

and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability.

Reviewing the engineering tasks and initiating the necessary corrective actions.

Developing specifications for the project's needed equipment.

Creating frameworks to measure the project's metrics and data collection.

Establishing field test methods and methods for monitoring the quality of those tests.

Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications.

Project Engineer Requirements:

Degree in engineering or a related field.

Minimum 3 or more years' field and project experience.

Excellent computer literacy and knowledge of design and visualization software.

The ability to work with multiple discipline projects.

Excellent project management and supervision skills.

Excellent organizational, time management, leadership, and decision-making skills.

Strong written and verbal communication skills.

Knowledge of applicable codes, policies, standards, and best practices.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.