Mon - Thurs: 8:30 a.m. - 6 p.m

Fri: 8:30 a.m. - 5:30 p.m

This role overseeing and handle company's facilities maintenance

and administrative duties

1. Handles proactive and preventative maintenance works to the building facilities/ system/ equipment (Example: telephone system, goods hoist lifts system, passenger lifts system, car lift, dumbwaiter, ACMV system, fire protection system, sanitary & plumbing system etc.). To ensure that all systems are in good functioning condition. If any repair or replacement are required, source for quotations and coordinate with the various stakeholders for the work to be carried out.

2. Make frequent trips to the various facilities within the Group to carry out routine inspection.

3. Contact and coordinate with both internal and external stakeholders / vendors on all the service maintenance, repair works and scheduling matters.

4. After completion by external vendor, conduct visual inspection to ensure that the works are carried out properly and satisfactorily.

5. Conduct bi-weekly night inspection to ensure the functionality of all the building signage and building security lighting.

6. Administrative duties such as preparation, verification & processing of Purchase Requisition/ Purchase Order and Invoices etc.

7. Updating of maintenance schedule and incurred expenditure reports.

8. Prepare annual building maintenance expenditure and budgetary reports.

9. Renewal of factory license, signage advertisement license, electrical installation license, subletting application, etc., and submission of new applications to relevant authorities whenever necessary.

10. To ensure that there is adequate stock for all toiletries and groceries supplies and place order if the stock is running low.

11. Prepare proposal to the management for any proposed improvement/ repair/ replacement work.

12. Assist in any ad hoc A&A/ upgrading/ improvement projects. Coordinate with the project consultants/ contractors and monitoring the project progress.

13. Review of drawings, building plans to ensure that the design specification complies to the owner’s requirement as well as to the statutory code of practice/regulation.

14. Quality control of work done by contractor to ensure that all works carried out are in accordance with the approved drawings, work scopes and technical specifications.

15. Any other suitable duties that may be assigned by the Management from time to time

Job Summary

We are seeking a driven Application Maintenance cum Support Manager who is competent in project management related to Traffic Engineering and Management and committed to deliver exceptional service.

Mandatory Skill-set

• Diploma or Degree in Electrical Engineering, Computer Engineering/Science or Information Technology;
• Has at least 5 years of relevant experience in Application Maintenace Support and Operations;
• Must have handled activities like incident management, problem management, release management, root cause analysis, deployment and monitoring;
• Understand Software Development Life Cycle SDLC, experience working with business users, various IT teams and vendors in managing the project cost and project risk;
• Experience in IT end-to-end procurement process (i.e. budget approval, tender/quotation, purchase requisition, invoice tracking and verification);
• Excellent team player with the ability to communicate across all levels within the organization;
• Positive attitude and able to work under pressure;
• Excellent technical troubleshooting skills;
• Strong interpersonal and communication skills.

Desired Skill-set

• PMP and ITIL certifications.

Responsibilities

• Responsible to provide application maintenance support in all stages of the Information Technology (IT) application life cycle related to Traffic Engineering and Management projects.
• Responsible to handle change requests, service request and incident tickets; ensuring proper ownership and closure of these request/tickets;
• Responsible to create and secure appropriate approvals for planned and adhoc system changes;
• Involve in user and system support during and post system implementation;
• Support IT audit activities when required;
• Manage the vendors service quality, contract and support standard in accordance to corporate policies and guidelines;
• Perform escalation procedures to senior levels, annual capacity planning and ensure high availability of system up-time;
• Collaborate with architect, application delivery teams to drive ITIL best practises through automation and Agile methodology;
• Ensure compliance to the corporate standards, policies and guidelines related to the application services;
• Maintain hardware and software assets, annual asset stock take; and to inform management on need for technology refresh before assets are end-of-life;
• Manage, support and track IT changes activities; provide monthly IT application and operations statistics.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Our client is a prominent player in the specialty chemicals sector, known for its innovative solutions and commitment to sustainability. Based in Singapore, our client focuses on delivering high-quality products while prioritizing safety and environmental responsibility.

We are seeking a Maintenance Supervisor (Electrical & Instrumentation) to oversee the upkeep of electrical and instrumentation systems.

Responsibilities:

• Regularly inspecting wiring, fixtures, and appliances.
• Identifying and addressing faults or hazards.
• Troubleshooting system failures.
• Analyzing blueprints for wiring layouts.
• Testing electrical systems using oscilloscopes, voltmeters, and ohmmeters.
• Calibrating instruments, DCS loops, and field setups.
• Performing maintenance on defective fixtures.
• Responding to fault requests promptly.
• Advising on equipment replacement options.
• Compiling electrical maintenance reports.
• Installing new electrical appliances within the facility.
• Ensuring adherence to safety and performance standards.

Requirements

• Min. Diploma or Bachelor's degree in Electrical Engineering or a related field.
• At least 5 years of relevant experience, preferably in a process plant environment, with a minimum of 2 years in a supervisory capacity.
• Must be willing to work in Jurong Island.
• Availability for overtime during breakdowns and shutdowns, as well as responding to emergency on-call situations outside regular hours.

Working hours: Mon-Fri, 8am to 4.30pm

Working location: Jurong Island (Site allowance provided)

Interested applicants, please send in your updated resume via the "apply" button.

Working Hours 5 days work week:

1st Shift-7.00AM to 3.00PM ,

2nd Shift -3PM to 11PM ,

3rd Shift-11PM to 7AM)

Job Summary

The role is responsible for ensuring the proper functioning, safety, and upkeep of equipment, machinery, and facilities. The primary objective of the Maintenance Technician is to minimize downtime, maintain operational efficiency, and contribute to a safe working environment.

Role and Responsibilities

1. Equipment Maintenance:

a) To perform routine inspections, preventive maintenance, and able to repair basic equipment including mechanical and electrical systems.

b) Diagnose basic to intermediate troubleshoot problems and implement appropriate solutions to restore equipment functionality.

c) Maintain accurate records of maintenance activities, repairs, and replacements.

d) Perform preventive maintenance work assigned.

2. Facility Upkeep:

a) Conduct regular inspections of the facility, safety hazards, and cleanliness concerns.

b) Coordinate and perform basic to intermediate repairs and adjustments to maintain a safe and well-maintained working environment.

c) Minimize downtime due to equipment breakdown.

3. Safety and Compliance:

a) Adhere to safety protocols and guidelines while performing maintenance tasks to ensure the safety of oneself and others.

b) Collaborate with relevant departments to address safety and compliance concerns promptly.

4. Equipment Installation and Calibration:

a) Assist in the installation and setup of new equipment, machinery, or systems.

b) Support basic to intermediate process modification and project.

5. Inventory Management:

a) Maintain an organized inventory of spare parts, tools, and supplies necessary for routine maintenance and repairs.

b) Works with Maintenance inventory and facility team to order and restock supplies as needed to minimize downtime.

6. Collaboration and Communication:

a) Collaborate with other maintenance team members and departments to address complex maintenance issues and projects.

b) Communicate effectively with supervisors, peers, and management regarding maintenance status, updates, and recommendations.

7. Training and Development:

a) To provide basic training to new and unskilled technician

Job Requirements:

• Minimum O level or equivalent; diploma/certificate or vocational training in maintenance or a related field is a plus

• Proven experience as a Maintenance Technician or similar role that strong in electrical

• Proficiency in using hand and power tools , experience in pump / gear box or motor repair will be at advantage

• Ability to diagnostic and problem-solving skills

• Strong attention to detail and organizational skills

• Excellent communication and teamwork abilities and proactive work attitude

• Knowledge of safety protocols and regulations

• Flexibility to work on-call or during off-hours, if necessary

• Proficient in Microsoft Excel, Words and PowerPoint, add advantage if familiar with CMMS

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Industry: Technology Industry

Location: Various Locations (Will be assigned accordingly)

Skills: Firewall, Maintenance, Network, Security

Our client is an established System Integrator with strong presence in the Enterprise, Network and Security Infrastructure business catering to Commercial and Government sector.

Position Responsibilities:

• This role will focus on Network Maintenance Support for products supported by the Company
• These products are (but not limited to): Cisco, Fortinet, Palo Alto, Solarwinds.
• Must be skilled in Firewalls Management, SIEM, Load-Balancer, EDR, NPM and may be required to travel to different client locations.
• Handle escalations and assist client’s technical issues.

Position Requirements:

• ITE, Diploma or Degree in Computer Engineering, Information Technology or any IT related field.
• Ideally with 1 to 2 years working experience in Network, IT Security Maintenance and Support.
• Technology knowledgeable in various network products such as Cisco, Huawei, Juniper, Palo Alto and OS technology in Unix, Linux and Windows.
• Network certifications such as CCNA, CCNP, NSE 4, PCNSE a strong advantage.
• Position will be on rotation stand-by schedule.
• Comfortable with various stakeholders, 3rd party and principal SI vendors.

We will consider all candidates but will prioritise those who have closer requirements to client needs.

Thank you!

Joseph Syho

Reg Number: R1108657

EA Licence No: 18C9079

Repair Order Desk Contract Staff (6 Months Contract), West

• West area
• Monday to Friday 9am to 6pm
• 6 months contract

Job description:

• Process and input customer orders, generate delivery documents, maintain transaction and interaction records, and update ERP (SAP) and databases (Microsoft Access).
• Ensure timely and accurate billing and invoicing for customers.
• Coordinate with and support other departments to address customer service issues.
• Collaborate within the Repair Team to achieve repair SPT and company goals.
• Key player within one or more Supply chain functions including materials, production, inventory, logistics, demand management and order fulfilment.
• Order fulfilment management for local and key clients
• Monitor and report on key performance indicators such as fill rate and days of inventory and forecast accuracy.
• Act as an intermediary between customer and cross functional departments to ensure high customer satisfaction.
• Be the key point of contact for monthly sales forecast and consensus analysis.
• Key member for monthly operations, pre-S&OP and weekly ASF meetings

Requirements:

• Must be familiar and able to use Microsoft Outlook and Excel.
• Must be able to communicate clearly and write fluently in English.
• Candidates with previous experience in aerospace customer order desk will be highly preferred.
• Candidates with experience using SAP and Microsoft Access will be good too.

Interested applicants, kindly email your updated resume to [email protected] and we regret that only shortlisted candidates will be notified

Yvonne Chai Cheng Man

Reg No: R23115356

EA License: 23C2060

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an IT Maintenance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Provide technical assistance to clients when required.
• Support operations on a 24/7 basis, with rotating shifts.
• Diagnose and resolve technical issues promptly.
• Communicate complex technical information in simple terms to clients.
• Understand and manage client requirements.
• Collaborate with the support team to escalate unresolved issues to the relevant product vendors.
• Maintain close communication with vendors to improve and support product solutions based on feedback and industry trends.
• Continuously enhance knowledge in IT security products and solutions.
• All other adhoc duties as assigned.

Requirements:

• Minimum Nitec/Diploma or other related field of studies.
• Minimum 1 years’ relevant experience.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Assistant Engineer (Project Management )

Summary:

• Equipment set up for various systems, conduct testing & commissioning

• Follow up with clients in a timely manner

• Assist sales team with site survey & system design

• Provide support and manage project

• Perform troubleshooting & repair / replace faulty parts

• Provide onsite support to diagnose and rectify technical issue

• Ad hoc duties as required

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science , Electrical / Electronic / Mechanical / Mechatronic or engineering field

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Possess good communication and interpersonal skills

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Must have at least 1 year experience in handling cable wiring / electrical project

• Good working attitude and self-motivated

Mon to Fri 9am to 6pm

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties of Mechanical Maintenance Supervisor:

• Supervise in-house contractors and vendors to ensure safe and efficient execution of mechanical tasks.
• Develop and update maintenance plans and schedules to minimize production disruptions.
• Analyze equipment performance to identify issues and propose improvements.
• Ensure maintenance plans meet engineering standards and compliance with regulations.
• Prepare maintenance documentation, including checklists and risk assessments.
• Achieve maintenance KPIs and support technician training and development.
• Manage manpower, including overtime and emergency planning.
• Oversee spare parts and warehouse activities, including stock management and ordering.
• Handle service contract scopes, PR, and evaluations.
• Forecast, monitor, and manage maintenance budget.
• Participate in emergency response and assume relevant roles as needed.

Requirements

• Min Diploma in Mechanical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in mechanical maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Information:

• Working hours: Mon-Fri, 8am - 5pm
• Salary range: Up to $4,500

Responsibilities:

• Troubleshoot and repair equipment/machine failures to reduce downtime.
• Plan and execute regular preventive equipment/machine maintenance.
• Collaborate with Engineers to address process-related problems linked to equipment failures.

Requirements:

• At least 2 years of relevant experience
• Hand-on experience using PLC/HMI programming with Mitsubishi and Omron brand.
• Experience in Mitsubishi and Omron product servo motor products.
• Understanding and being able to design automation electrical circuits.

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Our client is from Oil and Gas industry, a local leading player. They are looking for a Electrical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties:

• Ensure compliance with safety procedures and electrical codes.
• Supervise and lead electrical technicians and contractors in installation, maintenance, and repair of systems.
• Develop and conduct structured on-the-job training for E&I team members.
• Inspect and ensure quality control of all electrical works.
• Review and approve electrical isolation and excavation permits.
• Lead investigations into electrical maintenance issues, identifying root causes and implementing solutions.
• Collaborate with engineers to develop and implement maintenance programs for reliability.
• Conduct morning toolbox meetings focusing on safety and maintenance activities.
• Participate in emergency response procedures with assigned roles and responsibilities.

Requirements

• Min Diploma in Electrical Engineering related field.
• Min 8 years’ experience in Oil & Gas or Petrochemical industry
• Experience in E&I maintenance and supervisory

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Maintenance Scheduler (E&I) to assist their team for the next phase of their business. They are located in West.

Duties:

• Plan and schedule daily maintenance tasks for Electrical & Control assets.
• Coordinate with Mechanical, HSSE, Production, and Jetty Operations teams on work requests and permits.
• Liaise with authorities for natural gas equipment maintenance approvals.
• Coordinate with external vendors and contractors for site surveys and work execution.
• Ensure validity of Method of Statement and risk assessments.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 5 to 8 years of E&I experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• As a member of the operation and maintenance team, work to ensure the stable operation of company's internal systems.
• Coordinate with vendors on maintenance contracts for Hardware and Software and renew them as appropriate.

Responsibilities:

• Collect System performance logs and report them on the monthly basis.
• Ensure that the system configuration complies with company's security guidelines at the time of audit.
• Analyse functional requirements and reflect changes to the system following the established guidelines.
• Work with the team leader to ensure that the system configuration conforms to design standards and that the design meets functional and system requirements.
• handle day-to-day user queries (server, network, PC, user account) properly.
• For system troubles, take recovery action (workaround), investigate errors, and consider measures for improvement.
• Produce and maintain up-to-date system documentation (System runbook, IT Inventory list, ID management list, System parameter sheet).
• Identify system issues and work to improve the system.

Requirements:

• Experience in building Windows server systems (from server kitting, application installation to handing over the environment to the development team).
• Operation and maintenance of infrastructure tools (Backup, Monitoring, Anti-Virus, Job management etc)
• Understanding Microsoft 365 (Forms, SharePoint, OneDrive, Teams, Office)
• Experience in Network configuration (ACL, Firewall)
• Experience in building Linux, Unix OS server systems
• Experience in Cloud Services (AWS, Azure, GCP)
• Experience in Database (Oracle, SQL Server, etc)
• Programming skills (Power shell, Shell Script, VBS/VBA, Python)
• Application Development using Power Apps

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

Operational Duties

• Conduct preventive maintenance programs and routine inspections of mechanical and electrical installations
• Perform ad-hoc improvement work on mechanical and electrical installations
• Address tenant complaints, conduct investigations, and carry out necessary repairs
• Supervise and check contractors’ work

Administrative Duties

• Record plant operating conditions and utility meter consumption
• Document breakdowns and repair work
• Monitor spare part inventory and usage

Others

• Plan, train, and guide a team of Technical Officer ensuring they receive proper training to enhance their efficiency.
• Lead Technical Officers and contractors in executing work orders and maintenance requests
• Ensure daily operations are conducted efficiently and in an organized manner
• Assist senior engineers in system improvement proposals and provide recommendations to reduce system downtime
• Draft incident reports and update drawings and manuals

Requirement:

• Minimum NITEC in Engineering field
• Proven experience in building maintenance / ACMV

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Job Description

• Coordinate, supervise and perform building facility maintenance and rectification, and laundry services
• Facilitate interface with suppliers and term contractors for regular and ad-hoc maintenance activities
• Conduct routine checks including air-conditioning system, electrical, fire protection, plumbing system, central audio-visual security system, CCTV systems, fire safety equipment, etc., and ensure they are operating correctly
• Respond to users’ requests and alarms, and report any fault to the supervisor
• Perform preventive and corrective maintenance for building facilities and services including plumbing systems, and housekeeping service and equipment
• Conducting the necessary mitigations in order to make safe, isolate faulty and resume operation
• Troubleshoot and rectify minor maintenance issues such as bulb replacement, plumbing and part replacement
• Ensure the premises is kept clean at all times
• Assign duties to subordinates and supervise their work for conformance to prescribed standard of cleanliness
• Investigate complaints related to housekeeping service and equipment
• Perform cleaning duties in case of urgency or shortage of staff
• Develop and implement security measures for the premises
• Complete ad-hoc tasks and other duties, as assigned

Job Requirement

• Possess a NITEC or Higher NITEC in Building / Mechanical / Electrical Engineering or its equivalent;
• Minimum 2 years’ relevant experience as Building Technician or in similar capacity;
• Possess technical knowledge of general building systems;
• Familiar with building maintenance practices and safety procedures, would be preferred;
• Is organized and have good interpersonal skills;
• Is pro-active, independent, able to work with minimal supervision and perform under pressure.

Maintenance Engineer (WDA) 2 year contract

• Based in Singapore, the regional hub for Asia Pacific (AP) and top-ranked biopharmaceutical company on the Straits Times and Statista’s list of Best Employers in Singapore for two consecutive years (2020, 2021).
• Join the premier biopharmaceutical company that has been in Singapore for more than 25 years and in AP for over 60 years.

WHAT YOU WILL DO

Responsibilities include, but are not limited to:

· Provide technical expertise for all the DPI equipment related activities in the manufacturing process and support Maintenance Technicians.

· Execute maintenance, improvement, DPI maintenance activities, ensure preventative maintenance is completed according to schedule requirements, and support equipment change control implementations.

· Utilize technical skills to lead equipment and Utilities system deviation/atypical investigations, safety incidents and ensure effective root cause analysis is conducted.

· Provide solutions to recurring failures by performing RCA and identifying corrective action.

· Implement technical solutions to improve equipment uptime and asset utilization through use of Continuous Improvement mindset (Lean methodologies).

· Responsible for improving the reliability of DPI equipment and maintenance processes by applying the principles of Reliability Centered Maintenance.

Corrective Maintenance

· Ensure resolution and timely follow-up of identified production equipment and facility related equipment issues, unplanned events, and new opportunities identified by Maintenance team.

· Provide technical expertise and support the Maintenance Technicians for equipment breakdown, troubleshooting and recovery to ensure the timely and effective resolution of issues.

· Ensure equipment breakdowns are resolved in a timely manner and update the Preventive Maintenance Plan.

· Apply effective root cause analysis and troubleshooting Techniques to support the resolution of equipment-related incident and deviation/atypical investigation.

Preventive Maintenance

· Ensure all planned internal and external Preventive Maintenance (PM) activities are executed and completed.

· Update equipment critical spare part list and set minimum re-order levels.

· Review existing maintenance RAs promptly and to develop new one when necessary.

Compliance – Safety

· Participate in and support the implementation of actions for Incident Investigations and Audits

· Ensure required risk assessments, including HAZOPS, are carried out in a timely manner, recommendations provided, and implemented as agreed.

· Ensure permit requirements met IPT maintenance activities.

• Proactively review and challenge current activities to reduce safety risk for employees and quality risks for company’s products.

Compliance – Quality & Change control

· Prepare SOPs and Job Aids to ensure compliance with regulatory standards and ensure PM related documents are generated and maintained according to required standards and frequency.

· Ensure all deviations/atypical and customer complaints are fully investigated with any equipment related actions effectively implemented within the agreed time frame to continually improve processes, prevent waste, and eliminate rework.

· Ensure all out-of-tolerance equipment findings are appropriately documented and investigated in a timely manner.

· Support implementation of Equipment change by participating in impact assessments and executing field equipment modifications, including management of project schedules, resource plans, vendor coordination, and material purchases.

· Prepare and complete IQ, OQ documentation and ensure that documentation meets required regulatory standards.

Equipment reliability

· Utilize Lean Six Sigma Tools, such as Six Sigma, Kaizen, SMED, and 5S, to support execution of continuous improvement and OE projects intended to increase agility, flow and throughput, and also to reduce cycle time and inventory.

· Support development of a continuous improvement framework within the maintenance group and works with the Maintenance Lead to identify opportunities.

· Lead plant improvement processes to enhance availability, reliability, cost-effectiveness and efficiency of the plant.

· Collect and analyze data and follow up with recommendation to improve equipment’s reliability and reduce equipment failures. Work with COE’s to execute a Reliability-Centered Maintenance (RCM) plan and to share best practices and lessons learned, with objective of improving asset utilization.

· Participate in equipment/system-based Root Cause Failure Analysis (RCFA) investigations and update equipment reliability plans.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Degree in Mechanical / Mechatronics / Electrical or Instrumentation & Control Engineering
• 3-5 years of maintenance work experience in Pharmaceutical (Preferred), Chemical, Semiconductor, aviation, oil & gas or Petrochemical industry.
• Knowledge and experience working within a Computerized Maintenance Management System (CMMS). Familiarity with SAP is a plus.
• Knowledge of parts inventory management, mechanical and electrical equipment design reliability principles
• Project management skill, including problem-solving, developing and implementing technical solutions.
• Experience in HVAC and water system operation and maintenance principle.

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace

This position ensures that all aspects of building and facilities maintenance in the Schools is at optimum operational condition and conforms to up to date regulatory and safety requirement at all times.

Job Responsibilities:

• Preventative maintenance and ensure all facilities operate efficiently and conform to operating standards.
• Hands-on in meeting urgent repairs/complaints on electrical services, plumbing and sanitary requests.
• Proper maintenance of interior and exterior walls of buildings, appliances and equipment in the building.
• Conduct day to day inspection activities/ checking building wear & tear and defects
• Mobilise and supervise contractors on major / rectification works.
• Ensure compliance with all regulatory and safety regulations
• Comply with company safety guidelines and procedures
• Ensure accurate updates/reports are done for all work progress and completion.
• Monitors and controls expenses within all areas of the department.
• Lead and mentor a team of maintenance technicians.
• Any other duties that is assigned, inclusive of support for new school projects.

Requirements:

• Relevant Diploma/Higher Nitec/Nitec with 3 years relevant experience or
• 5 years of relevant working experience in major building maintenance/construction projects
• Possess a class 2B/3 license with own transport.

We offer a competitive remuneration package plus benefits to the right candidate. Suitably qualified applicants are invited to send your updated resume in MS Word via APPLY NOW button.

Please include cover application letter and detailed CV with current and expected salary and copies of qualifications and testimonials. On appointment original copies must be provided for verification.

Job Descriptions:

• Responsible for the operation and maintenance of mobile equipment in idc
• Responsible for the operation and maintenance of the Linux server/switch/AP in idc
• Responsible for the operation and maintenance management specifications of idc

Job Requirements

• Understand common Linux maintenance commands, Android device flashing, etc. ADB instructions
• Basic understanding on Network Protocols, and server operation in Linux OS
• Excellent communication skills

Key Responsibilities

• Incident Handling: Perform trouble shooting via detailed analysis of HW and SW failures with the usage of all available diagnostic tools. This includes repair of HW on component level, cleaning and adjustment of mechanical components and configuration and installation of SW.
• Preventive Maintenance: Perform routine checks according to documented preventative maintenance procedures and refill consumables as directed.
• IMAC/R: Perform Installation, Movement, Addition, Change and Removal of hardware and software products and components as directed.
• Customer Training: Instruct and train customers on usage and operation of installed HW and SW.
• Process Tasks: Receive briefing for incidents and orders from dispatch function. Update dispatch function of all unforeseen issues. Provide detailed debriefing on all performed activities. Proactively inform customers about performed actions.
• Continuous Improvement Process: Observe technical or process problems at all times, proactively inform about potential problems and offer improvement suggestions if possible.
• Actively use corporate tools and processes for knowledge sharing, e.g. knowledge base to find solutions and provide input for it.
• Training: Participate in regular hardware and software trainings (on the job, classroom trainings and web-based trainings) according to the corporate training concept and receive certification after passing relevant test.

Required Qualifications

• Proven track record of more than 1 year Service Technician with banking/retail experience.
• Successfully completed education in IT- or mechatronic/electronic-related profession.
• In individual cases it is possible to assign the job to an employee, if the essential professional knowledge is acquired by work experience.
• PC literacy and good knowledge and application of the relevant tools and methods.
• Product knowledge of relevant industry and basic ITIL skills preferred.
• Ability to lift and move heavy loads, stand most of the day, climb, bend and stoop while working on equipment.
• Acceptance of exposure to the outside elements.
• Shift adaptability, which would include an on call rotation for evenings and weekends.
• Exceptional customer service skills are needed.
• Ability to organize and inventory truck stock parts and tools.
• Sense of urgency, organizational skills, professional presence and work in team environment.
• Ability to pass MVR, background and drug test where required.

Preferred Qualifications

• Firstline or Service Technician work experience preferred.
• Vocational/Trade School preferred