Responsibilities:

• To provide technical support to the repair operations and assume the role of SME for areas of engineering competencies and advocate industrial engineering best practices.
• Responsible for new repair capability, new product introduction, equipment and chemical.
• Support the technical admin executive with document discrepancies.
• Liaise with central engineering for support and sharing of regional best practices, solutions and knowledge.
• Be the main contact point for PSE/ISPM on investigation support and assist in chronic unit investigation process.
• Responsible for new test bench set up and/or transfer for new repair capability, new product introduction.
• Establishing necessary maintenance strategies and contracts for test benches, equipment, tools.
• Perform routine preventive maintenance and manage calibration with vendors.

Requirements:

• Diploma/ Degree in Aerospace/ Aeronautical/ Electronic/ Electrical/ Mechatronics Engineering or equivalent
• Experienced in a technical support function.
• Experienced in the aviation industry will be an added advantage.
• Proficient in Microsoft Office applications.
• Fluent in both written and oral communication.

Other information:

• Working Location: Changi
• Working Hours: Monday - Friday, 9am - 6pm
• Company shuttle bus is provided at designated MRT stations
• 1 Year Contract position
• This role will support the setting up of India's repair shop, may travel to India 1 - 2 times per year.

Job Description

• Industry/ Organization Type: Freight Transport
• Position Title: Fleet Maintenance & Repair Representative
• Working Location: HarbourFront
• Working Hours: 5 days (Mon – Fri, 9.00 am – 6.00 pm)
• Salary Package: Basic up to $5,000 + AWS + $100 Mobile Reimbursement
• Duration: Permanent Role

Key Responsibilities

• Evaluating and negotiating incoming Maintenance & Repair estimates with the respective repair vendor/depot
• Ensure the best possible M&R quality in a most cost-effective manner
• Checking incoming Equipment Check reports (ECR) upon plausibility and correctness
• Registering and maintaining tank database in in-house VistaMare system
• Assist in negotiating M&R terms and conditions with regional service provider
• Ensure adequate depot performance based on guidelines and requirements by conducting regular depot visits and audits
• Monitor depot Turnaround times
• Point of entry for the M&R service provider (in- and external)
• Assist operative Business units with technical expertise
• Accurate and timely maintenance of all necessary data in the respective systems (i.e. Vista Mare, Monitor)
• Ensure proper cost allocation and handling of claims/liabilities

APPLY NOW!!!

• Nitec/Diploma/Degree in Engineering or related discipline
• Possess technical knowledge in the tank container industry
• 1-2 year’s experience in similiar job function
• Good communicator with fluency in English
• Good IT skills
• Self-confidence and basic negotiation skills
• Willing to travel for visiting customer and/or supplier

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66048 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing and Production
• Position Title: Maintenance Technician / Service Technician
• Working Location: Gul Circle
• Working Hours: 5 days (Mon – Fri, 8 am – 5.15 pm), OT on Alt Sat 8 AM - 4:30 PM
• Salary Package: Basic salary + Fixed Allowance $60 + Transport Allowance + Attendance Allowance + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Ensure smooth supply of facility to production section
• Maintain and ensure reliability of machines
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Filing of all machine maintenance life history
• Safety of all machines for production and quality
• Calibration of machines
• Other general maintenance works

APPLY NOW!!!

• At least 1 year of relevant work experience
• Good interpersonal & communication skills.
• Physically fit

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65731 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Maintenance Technician (Electrical/PLC)

Responsibilities:

• Preventative maintenance on all the equipment in plant as per instruction manufactures manuals
• Troubleshoot electrical and pneumatic faults
• Continual improve manufacturing process and equipment capability to achieve higher production yield and quality.
• Plan and organize preventive maintenance programme for manufacturing equipment
• Perform machine maintenance and repair

Requirements:

• Min ITE or NITEC in Electrical or Electro-Mechanical engineering
• Possess 2 year of working experience in manufacturing industry
• Knowledge type of water pumps, Programmable Logic Controller & Touch Panel
• Positive working attitude and able to work independently.

Interested applicants please submit your resume to [email protected]

Maintenance Engineer (Physical Surveillance)

A leading IT solutions provider is expanding and looking for a maintenance engineer to join their ranks. Here are the details!

Your Role

• Responsible for system functionalities and ensuring it is up and running at all times
• Provide maintenance and troubleshooting issues related to security system, server and network
• Working as a team to support daily operations
• Collate reports and checklist for projects for billing purpose
• Co-ordinate with sub-contractors for on-site matters

The ideal candidate

• ITE/Diploma in Engineering/IT/Electrical disciplines
• 2-5 years of working experience in the maintenance field specifically in physical surveillance
• Hands-on experience in CCTV/Access control systems
• Ability to be on stand-by basis 24/7 on a rostered schedule
• Singaporeans preferred due to nature of the scope

What you'll get in return

• $58,000 - $65,000 per annum
• Exciting career growth
• Good career opportunities and exposure

What you need to do now

If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV to [email protected] for a private and confidential discussion and also for us to discuss other potential and future opportunities that may align with what you are looking for in the market.

At Hays, we value diversity and are passionate about placing people in a role where they can flourish and succeed. We actively encourage people from diverse backgrounds to apply.

EA Reg Number: R22107188

EA Licence Number: 07C3924

Company Registration No: 200609504D

Work Location : Yishun

Work Hours: Monday to Friday 8.0am to 5.00pm

Job Description:

-Check on the school compound for Mosquitoe, pest vandalism water blockage and cleaning of the school compound

-Report faulty,

-Escort term contractor when they are in school during repair work.

-Assist in school decoration.

-check on plants that need to be trimmed.

- fishpond, spice garden maintain.

Job Requirement:

N level

- 2 years similar working experience

- team player organized, meticulous and able to multi task

-Strong Communication and interpersonal Skills.

22C1322 Maxhunt Resource Pte Ltd

R23115755 Nicole Choy

Job Description

• Industry/ Organization Type: Telecommunication Services
• Position Title: Facilities Maintenance Technician
• Working Location: New Tech Park & Techlink
• Working Hours: Rotating 8-hour shifts (3 on + 3 off)
• Salary Package: Basic + Shift Allowance ($300) + AWS + Variable Bonus + Medical & Flexi Benefits
• Duration: Permanent

Key Responsibilities

• Responsible for the maintenance of building facilities services like electrical, mechanical, and facilities equipment.
• Responsible for minor work repair and rectification to building and equipment and defect rectification works.
• Responsible for conducting regular preventive maintenance programs for building equipment and services.
• Work with contractors and vendors to carry out schedules and supervise work on-premises to ensure quality cost-effective repairs.
• To provision engineering services on weekends, public holidays, or extended hours (if required).
• To standby 24 hours on duty roster (will provide additional standby allowance).

APPLY NOW!!!

• Minimum 1-year experience in facilities management or a similar role.
• Minimum ITE Certificate / Diploma in Mechanical Engineering, Electrical Engineering, and Facilities Management.
• Hands-on experience in Mechanical (ACMV) and Electrical maintenance, troubleshooting, and repair work.
• Able to perform shift work.
• Experience in critical environments (e.g. Data Centre / Cleanroom / Semi-conductor plant) is an added advantage.
• Good communication and teamwork.
• Proficient in MS Excel & Word.
• Good understanding of facility M&E systems.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #64875 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is a Global MNC, one of the leading players in the Industrial Equipment sector. Due to business needs, they are now recruiting a Maintenance Technician to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Assess the various mechanical and hydraulic systems, troubleshooting issues, and devising effective solutions.
• Interpret technical drawings, detecting the relevant faults/issues, and executing the essential repairs
• Be knowledgeable about engine components, handling the operation/maintenance of the designated tools and equipment
• Undertake maintenance tasks on large machinery, including lifting heavy parts/components
• All other adhoc duties as assigned

Requirements:

• Minimum Higher Nitec/Diploma in the relevant fields of Engineering
• Minimum 1 year of relevant working experience (Maintenance of heavy industrial equipment/vehicles)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Job Description

• Industry/ Organization Type: Manufacturing/ Chemical
• Position Title: Production Maintenance Technician/ Chemical Process Technician
• Working Location: Tuas
• Working Hours: Mon – Fri, 8.30 AM – 5.30 PM
• Salary Package: Up to $2,500 + Transport Allowance + Code of Conduct Allowance + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Conduct hydrogen peroxide purification to meet targets and quality standards.
• Operate ammonium hydroxide mixing processes within set targets and quality norms.
• Manage operations including Ultra-Pure Water System maintenance, Waste-Water System upkeep and Utilities Equipment operations (Chillers, Water Tanks, Compressors, FFW, etc.)
• Troubleshoot and repair process equipment.
• Perform routine preventive maintenance on production items.
• Calibrate production instruments and equipment.
• Enhance process efficiency and operation lines.
• Compile and prepare progress and statistical reports using checksheets and datasheets.
• Inspect production areas and take corrective action as needed.
• Execute additional tasks as directed by superiors.

APPLY NOW!!!

• At least Nitec in any Engineering.
• Preferably with minimum 1 year of related experience. However, inexperienced candidates are welcome to apply as training will be provided.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65941 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

1. Responsible for the maintenance & servicing of airport ground support equipment

2. Ensure day to day operations are effectively carried out with a team of skilled technicians

3. Plan for maintenance schedule and work team so as to meet customer's requirements and also comply fully with MOM's rules on OTs and other requirements

4. Constantly looking for business opportunities for the Company with available resources

5. Train new technicians to enable them to acquires necessary skills to maintain airport equipment for customers.

6. Attend technical trainings overseas provided by principal manufacturers

• Well Established Company
• Basic $3800 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety
• Perform electrical and Instrumentation troubleshooting
• Able to work and trouble shoot with AC low voltage single phase and 3 phase systems
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose
• Experience in 3 phase generator control interfacing to grid power
• Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva)
• Understand and develop electrical panel schematics if needed
• Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting
• Update and control of Electrical specification, procedure and drawings
• Material Management including consumables, parts and spare units
• Responding to breakdowns, diagnosing faults, record and report
• Review and approve of service, repair and overhaul equipment, record and report
• Managing routine 5S at the maintenance workshop, store and work area at site
• Communicate with clients, consultants, project personnel and relevant authorities
• Other ad-hoc duties as assigned

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering
• At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Salary $2300 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Normal working hours

Job Responsibilities:

• Perform system diagnostics/troubleshooting of system
• Perform routine maintenance on system
• Perform replacement/installation of system
• Perform maintenance checks of system
• Writing of service report after work completion
• Communicate with customer on works performed and make recommendations
• Any other ad hoc duties as assigned

Job Requirements:

• Possess minimum GCE ‘O’ level or Nitec in Mechanical / Electrical Engineering or equivalent qualification with at least 1 year of relevant experience
• Possess Class 3 will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a Global MNC, one of the leading players in the Industrial Equipment sector. Due to business needs, they are now recruiting a Maintenance Technician to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Assess the various mechanical and hydraulic systems, troubleshooting issues, and devising effective solutions.
• Interpret technical drawings, detecting the relevant faults/issues, and executing the essential repairs
• Be knowledgeable about engine components, handling the operation/maintenance of the designated tools and equipment
• Undertake maintenance tasks on large machinery, including lifting heavy parts/components
• All other adhoc duties as assigned

Requirements:

• Minimum Higher Nitec/Diploma in the relevant fields of Engineering
• Minimum 1 year of relevant working experience (Maintenance of heavy industrial equipment/vehicles)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Location: West

Permanent Night shift (10:45pm to 7:30am from Mon to Fri)

Salary up $3500+$300+shift allowances

Have AWS & Bonus

Responsibilities:

• Ensure all production equipment and facilities are maintained well.
• Minimize production downtime by reducing breakdowns.
• Performs preventive maintenance procedures for equipment on a scheduled basis.
• Maintains records of scheduled maintenance procedures. . Train production team on AM (autonomous maintenance) and to support Kaizen.
• Conduct daily walk-through/inspection to ensure that all infrastructure and equipment are in good working condition and provide feedback on any abnormality of failure of equipment for rectification.
• Plan and execute preventive maintenance on infrastructure and equipment.
• Repair and replace broken or malfunctioning components of machinery and equipment.
• Maintain critical spare parts list to minimize production downtime and to plan for sufficient stock of critical spare parts based on possible impact and frequency of parts failure.
• Attend and assist to vendors/ contractors within factory during servicing and maintenance of production, facilities and safety equipment.
• Ensure fire protection equipment is properly maintained and up to date.
• Strictly enforce and follow all health, safety, environment and quality procedures at all times.

Requirements:

• Minimum Diploma in Mechatronics/Mechanical or Electrics/Electronics Engineering or equivalent
• 3 years of relevant working experience in a similar environment

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Assess and negotiate incoming Maintenance & Repair estimates with the respective repair vendor/depot.
• Make sure the best possible Maintenance & Repair quality in a most cost effective manner.
• Verify incoming Equipment Check reports (ECR) for plausibility and correctness.

Requirements:

• Nitec in Industrial Engineering/Mechanical Engineering or equivalent.
• At least 2 years of relevant working experience
• Strong technical knowledge in tank containers industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Order Number: 401381

Responsibilities :

• Oversee maintenance and engineering operations for electrical facilities within manufacturing plants, ensuring the safe and seamless functioning of operations.
• Effectively coordinate and execute significant field maintenance projects, prioritizing the safety of workers and preserving the integrity of facilities.
• Collaborate with internal and external business units to facilitate timely completion of maintenance tasks, minimizing disruptions to plant operations.
• Perform engineering studies and modifications on electrical facilities in alignment with technical specifications and business requirements.
• Organize and conduct training sessions for Electrical Supervisors, aiming to enhance their skill sets and competency levels. Additionally, implement management systems compliant with ISO 9001, ISO 14001, and SS506 standards.

Requirements :
*Non-experienced candidate are welcome to apply*

• Possessing hands-on experience in the electrical facilities of chemical plants is a plus.
• Possess basic knowledge in programmable logic controllers (PLC) and human-machine interfaces (HMI) is an added advantage.

We regret that only shortlisted candidates will be notified.
However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Overview

As a Maintenance Engineer (Senior / Assistant), you are responsible for maintaining and repairing the heavy machinery, plant equipment, tools and systems used in the manufacturing, engineering and other industrial production processes. You are to ensure that all machineries and equipment are in good working conditions as and when are needed.

Responsibilities

1. Manage, oversee and lead the Maintenance team to ensure minimum downtime of Facility, Machinery and Equipment.
2. Strategize on maintenance regime, maintenance supplies, work instruction and methods.
3. Create plant preventative maintenance procedures and schedules.
4. Conduct routine inspections and periodic maintenance checks on machines to keep them running smoothly.
5. Plan equipment upgrading and machinery modifications for improvement or prolong efficiency.
6. Plan, order, replenish, inventory keeping of machinery parts.
7. Analyze gaps to ensure programmes meets customers’ and company requirements.
8. Analyze breakdowns, diagnose faults and supervise time critical equipment repairs.
9. Offer technical expertise and necessary in-house training to Maintenance team, Operations team (i.e.: supervisor, foreman, fitters, technicians, etc.) and others.
10. Manage budget for current and future equipment upgrades, replacements and maintenances.
11. Resource, coach, mentor and motivate direct reports to create a high performing team.
12. Ensure the cause of non-conformities are properly investigated and analyzed all corrective and preventive actions taken are effective.
13. Responsible for control of maintenance cost, procurement of new components for existing equipment, or replacing the entire set of machines after a prescribed period of usage is complete.
14. Ensure all ISO documentations relating to Maintenance of plant machineries are up-to-date.
15. Report to Production Manager and Top Management on the performance of the quality management system including opportunities for improvements.
16. Perform any other duties as assigned by the Management and/or the designated manager.

Requirements

1. Degree in Mechanical Engineering or equivalent, with a minimum 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment. OR
2. Higher NITEC in Mechanical Engineering or related / Professional Certificate / Diploma in Mechanical Engineering, with a minimum of 3 years of relevant work experience in maintenance in an automation / equipment manufacturing environment.
3. Able to multi-task, work independently, proactive with positive attitude.
4. Resilient, self-driven and analytical.
5. A strong problem solver with an eye for detail and an analytical mind.
6. Able to stand, stoop, squat and kneel for long periods of times, as well as lift, push and pull large machine parts or machines or machines as needed.
7. Proficient in Microsoft Word and Excel.
8. Familiar with various ISO / QMS standards such as ISO 9001, ISO 45001.
9. Able to work on weekends / public holidays when required.

Our client is a Global MNC, one of the leading players in the Industrial Equipment sector. Due to business needs, they are now recruiting a Maintenance Technician to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Assess the various mechanical and hydraulic systems, troubleshooting issues, and devising effective solutions.
• Interpret technical drawings, detecting the relevant faults/issues, and executing the essential repairs
• Be knowledgeable about engine components, handling the operation/maintenance of the designated tools and equipment
• Undertake maintenance tasks on large machinery, including lifting heavy parts/components
• All other adhoc duties as assigned

Requirements:

• Minimum Higher Nitec/Diploma in the relevant fields of Engineering
• Minimum 1 year of relevant working experience (Maintenance of heavy industrial equipment/vehicles)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Main Responsibilities

• Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.

• Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification

• Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals

• Prepare operational and maintenance schedule as per MIS

• Work closely and collaborate with the customer support team to ensure customer satisfaction.

• Identify potential upselling opportunities at client site during regular or ad-hoc maintenance

• Remote monitoring of the system operation and performance and reach site if any emergency.

• Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.

• Working with a team and deliver the work within the planned schedule.

• Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.

• Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

• Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent

• Electrical or Mechanical troubleshooting experience would be advantageous

• HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment

• Strong communication and analytical skills.

Meranti Power Pte. Ltd., a fully owned subsidiary of Energy Market Authority, is establishing a maintenance team to maintain two open cycle gas turbines of our power generation station.

We are inviting applicants for the positions of Technical Officer (Electrical) who shall report to the Senior Engineer/ Engineer/ (Electrical Maintenance) and be responsible for supporting him in the maintenance of Electrical systems of the power station/plants. The Technical Officer shall support Electrical team in the following:

Responsibilities:

• Responsible for proper maintenance of gas turbine, generator and auxiliary systems as assigned by Head or Engineers in-charge
• Perform troubleshooting, predictive, preventive and corrective maintenance to ensure plant equipment and systems run smoothly and efficiently
• Identify, plan and initiate required actions to maintain the power plants for long term reliability and efficient generation output
• Prepare technical specifications for equipment services, contract labour and ad-hoc maintenance services. Supervise and report performance of contractors to ensure good quality and progress of maintenance works, as well as full compliance with contract specifications
• Liaise, supervise, and coordinate with contractors and vendors on projects, maintenance, repair, shut down, and overhaul works
• Support operation and maintenance engineers in investigation, analyse and determine the root cause of plant defects and outages
• Maintain and control all records as required
• Assist in the preparation, certification and review of all management systems, including ISO 9001, ISO 14001, ISO 18001, ISO 50001 annually and provide support to the auditing parties wherever necessary, including internal & external auditors, to rectify non compliances and/or to follow up on improvement items identified during audit
• Support engineers in managing maintenance contracts and inspections, testing and commissioning of new equipment
• Monitor ad-hoc plant projects/tasks to ensure on time delivery
• Perform work orders allocated by Department Heads and/or Engineers

Requirements:

• Education in Electrical Engineering
• Minimum 2 years’ Electrical maintenance experience in a power plant or related industry
• Willing to work overtime
• Self-driven with good working attitude and possess keen learning disposition
• Proven attendance record and works well in a team
• Work location is in Jurong Island (Transport to and from Jurong East MRT are provided)

Only shortlisted candidates will be notified.

By submitting your personal data and/or resume to Meranti Power Pte. Ltd. (“MP”), you shall be deemed to have given your consent to MP for collecting, using, and disclosing your personal data for the purpose of assessing your job application.

Job Description:

- Assist Centre Head and supervise a team of technicians in delivering technical advices/support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

Interpret circuitry diagrams and PCBs for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the maintenance, repair and overhual (MRO) tasks allocated to the section in supporting commercial products, proprietary and non-proprietary defence products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches,studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Bachelor in Engineering (Electrical & Electronics)

- Experience in PCB and schematic design work

- Experience in effectively leading a team of Technicians

- Experience in SAP System, Automotive or Military Land System is advantageous

- Strong fundamental knowledge in Digital and Analog Electronics

- Knowledge in Microcontrollers, FPGAs and CPLDs

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting PCBs

Capable to use electronic tools such as multimeter, oscilloscope, digital analyser, function generator, etc

- Possess strength to comprehend, analyse and present facts and figures

- Ability to embrace challenges and apply critical thinking to resolve arising / urgent matters without losing overall business focus

- Good analytical and problem solving skills

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

- Working Hours: Mon – Fri; 8am - 5.30pm

- Location: Airport Road

- Permanent

- Salary: Up to $7000 + VB

Key Job Accountabilities:

1. Process / Product Type

• In-charge of at least two repair processes and two product type
• Troubleshoot process issues
• Resolve daily production issues
• Technical Queries to OEM or Customer
• Assist in process investigation
• Writing worksheets for piece job pertaining to assigned process
• Generate process and qualify parameters
• Process improvements
• Cost Savings
• Basic trending for process parameters
• In charge of product type and rotate
• Link up with Authorities on matters pertaining to processes

1. Cap Setup

• To do First Article on new ESM repair procedures, SBs
• To do Capability Setup on new equipment or processes
• Design and RFQ for new fixtures/Jigs
• Carry out Tooling Review and Control
• Do submission for capability declaration

1. Documentation

• Publication Review (ESM, SB, ADs, TR, IC,) including process specification (AMS, ASTM, BS)
• Worksheet amendments
• In-house specifications amendments
• Publication Review (ESM, SB, ADs, TR, IC,)
• Review Manual updates
• Prepare FMM for machine
• Prepare Aviation HIRA for processes

1. Operation Support

• Provide Tech support to Operation
• Raise TVR, CDR for engine repair
• Raise TM, EB, EN,
• Attend, resolve and smoothened operations flow
• Review, investigate and provide solutions to Open Reporting issues raised by operation.

1. Investigation

• Assist in Investigation of engine component issues
• Carry out root cause analysis, provide recommendations for corrective and preventive
measures
• Follow up on investigation details and ensure no re-occurrence

1. Troubleshooting

• Resolve repair processes issues

1. Training

• Carry out training on repair processes and associated Standard practices

•Carry out training for first article processes

Salary:

• Up to $7000 + VB

Working Hours:

• Working Hours: Mon – Fri; 8am - 5.30pm

Period:

• 1 Year Renewable Contract

Location:

• Airport Road

Requirements:

• Degree in Mechanical, Aerospace or Aeronautical Engineering
• Have undergone at least 2 – 3 years of the on-the-job training
• 5 years working experience in Propulsion Engines and Components MRO Environment
• Strong Fundamentals in Engineering Drawing interpretations
• Understanding of Repair Processes is an added advantage
• Regulatory NDT requirements
• FAA 45 /EASA 145 regulations
• Strong analytical and communication skills
• Strong Interpersonal Skills
• Demonstrate high degree of initiative

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201 )

3 Shenton Way, Shenton House #19-01, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Fleet Maintenance & Repair Representative

• Working Hours: Monday-Friday [9am - 6pm]
• Location: Harbourfront Tower 2
• Salary: $4,000-$5,000 (With AWS only, no bonus)
• Other Benefit: AL, Medical & Dental Reimbursement; Mobile Reimbursement

Requirements:

• NiTec in Engineering (Industrial), Engineering (Mechanical) or Engineering (others) educational qualification,
• 2 years technical experience in the tank container industry
• Willing to travel for visiting customer and/or supplier

Jobs Scope:

• Evaluating and negotiating incoming Maintenance & Repair estimates with the respective repair vendor/depot
• Ensure the best possible M&R quality in a most cost effective manner
• Checking incoming Equipment Check reports (ECR) upon plausibility and correctness
• Registering and maintaining tank database in in-house VistaMare system
• Assist to negotiate M&R terms and conditions with regional service provider
• Ensure adequate depot performance based on company guidelines and requirements by
• conducting regular depot visits and audits
• Monitor depot Turnaround times
• Point of entry for the M&R service provider (in- and external)
• Assist operative Business units with technical expertise
• Accurate and timely maintenance of all necessary data in the respective systems (i.e. Vista Mare, Monitor)
• Ensure proper cost allocation and handling of claims/liabilities

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279