Responsibilities:

• Perform manufacturing defect diagnosis and analysis, provide timely feedback to respective line leaders, supervisor and engineer in the event of defect spike detected by the assembly line and test area.
• Support Test Engineer in executing evaluation work order, compile test reports so that all evaluation test reports are ready for engineer to analyse
• Actively involve in company wide Smart Lean initiative, seek improvement opportunities such as defect reduction and productivity improvement ideas. Implement and monitor the impact of the initiative, fine tune the implementation to get maximum benefit
• Create One Point Lesson for every critical defect detected related to workmanship, perform training to the operator to raise quality awareness

Requirements

• Min NITEC / Diploma in mechanical / Electrical or other engineering courses
• Min 2 to 3 years of testing / production technicial experience
• Experience in medical device industry

Interested candidates, pleaseInterested candidates please send your updated resume to:

[email protected]
Attn: Senior /Testing Technician (Medical Device/ Taiseng) #HKA

We regret to inform that only shortlisted candidates will be contacted

EA Personnel: Kayley Ng Yin Yi (R1762843)
Company EA Registration Number: Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: Logistics/ Manufacturing & Production
• Position Title: Maintenance Technician/ Facilities Technician
• Working Location: Jurong Island (Company Transportation Provided)
• Working Hours: 4 days, 12 hours Rotating Shift (2-day shifts + 2-night shift)
• Salary Package: Basic Salary + Allowances + OT + Incentive + AWS + PB
• Duration: Permanent

Key Responsibilities

• Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment
• Carry out and rectify facilities-related matters

APPLY NOW!!!

• Possession of Diploma, NITEC, NTC-2 or ITC Mechatronic / Electrical Engineering is preferred
• Equipment knowledge - Bagging/ packaging/ conveyor system
• General knowledge of AC drives and electrical motors, pneumatic cylinders and roller/chain conveyors
• Knowledge of PLC, control circuits and electrical system
• Min. 3 years' relevant experience in heavy industry sector
• Must be prepared to work on a 12-hour rotating shift
• Experience in Bagging line would be an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65269 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Job Scope:

• Perform routine compounding of fragrance and oil samples
• Ensure compounded samples meet quality standards
• Maintain and track stock level of laboratory equipment and supplies
• Ensure that bio-hazardous materials are disposed safely
• Perform standard laboratory tests in according to prescribed procedures and recording of test results
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma in Pharmaceutical Sciences or any other equivalent certification
• Able to start work immediately or within a short notice
• Prior internship experience is an added advantage

Interested candidates kindly send in your resume to: [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Job Summary: The IT Operation and Maintenance Manager is a critical role responsible for overseeing the ongoing operation, maintenance, and support of an organization's IT infrastructure and systems. This position plays a crucial role in ensuring the reliability, security, and performance of IT assets and services. The IT Operation and Maintenance Manager typically reports to the IT Director or Chief Information Officer (CIO).

Key Responsibilities:

1. Operation and Maintenance:Manage the day-to-day operation, maintenance, and monitoring of IT systems, networks, and infrastructure.
Ensure that IT systems and services are available and performing optimally, minimizing downtime and disruptions.

2. Team Management:Lead and supervise the IT operation and maintenance team, including system administrators, network engineers, and support staff.
Recruit, train, and evaluate team members to maintain a high-performing and cohesive workforce.

3. Problem Resolution:Identify and resolve IT issues and incidents promptly to minimize impact on business operations.
Implement effective incident management and problem-solving processes.

4. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
Ensure accurate inventory and licensing compliance while optimizing asset utilization.

5. Security and Compliance:Implement and enforce IT security policies, procedures, and best practices.
Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.

6. Disaster Recovery and Business Continuity:Develop and maintain disaster recovery and business continuity plans to safeguard against data loss and ensure continuity of operations.
Conduct regular testing and updates of these plans.

7. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
Negotiate contracts, service-level agreements (SLAs), and ensure service quality.

8. Performance Monitoring:Implement monitoring and reporting tools to proactively detect and resolve performance issues.
Analyze performance metrics and recommend improvements.

9. Documentation:Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
Create operational manuals for team reference.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.

2. Experience: A minimum of 5-7 years of experience in IT operations and maintenance, with at least 2-3 years in a management or supervisory role, is usually required.

3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a plus.

4. Leadership Skills: Strong leadership and team management skills, with the ability to motivate and lead a diverse IT team.

Job scope :

1.Conduct preventive maintenance and regular inspections of installations, fixtures and fittings, equipment, common facilities and property to ensure they are clean, safe and in good working condition;

2.Undertake minor building, mechanical and electrical repair works and handyman works (such as changing of light bulbs, reset drawer locks, etc);

3.Monitor and attend to maintenance service requests, investigate and initiate corrective actions for any service and equipment breakdown, or fault detected during routine check, servicing and maintenance;

4.Daily, weekly and monthly inspection of key facilities, systems and critical areas;

5.Setup, test and check audio visual systems at meeting facilities;

6.Coordinate and supervise the rectification of defects, maintenance, replacement and upgrading works carried out by contractors;

7.Supervise contractors/vendors performing maintenance works on UPS, generators, FM200, fire alarm, sprinkler, high voltage and low voltage switchboards;

8.Monitor utilities consumption by taking water and electricity meter readings and report out of normal consumptions;

9.Assist in fire safety management, emergencies and business continuity plan;

10.Liaise with other divisions on projects and maintenance works and ensure compliance with fire, health and safety standards;

11.Coordinate and work with audio and visual equipment and cleaning contractors to set up meeting venues including seating arrangements and equipment;

12.Update engineering systems information databases and breakdown record; and

13.Any other facilities management works or related works that arise from the building operation and need.

Job Description

• Industry/ Organization Type: Security System Service Provider
• Position Title: Electrical Technician (Night shift)
• Working Location: East (Nearest MRT: Tai Seng/ Paya Lebar)
• Working Hours: 5 days (Monday-Friday, 7 PM to 4 AM, or 9 PM to 6 AM)
• Salary Package: Gross Up to SGD 2700 (Basic salary SGD2200 + OT) + Variable Bonus
• Duration: 1-year contract (Renewable)

Key Responsibilities

• Equipment set up for various systems, conduct testing & commissioning
• Install electronic systems including cabling and storage device
• Perform equipment troubleshooting, repair, and preventative maintenance for the electronics system
• Project management and follow-up with clients
• Provide onsite support to diagnose and rectify technical issues

APPLY NOW!!!

• Min. ITE in Engineering field
• Familiar with Windows, Word, PowerPoint, Excel, and Access
• Comfortable with working on-site
• Training provided to inexperience candidate

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65663 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Operation and maintenance of electrical systems.
• Continuous monitoring of performance to ensure maximum uptime.
• Coordinating projects for the installation of new equipment.
• Troubleshooting system abnormalities and offering technical solutions.
• Oversight of external contractors and vendors while maintaining safety standards.

Requirements:

• Degree in Electrical Engineering or equivalent.
• At least 3 years working experiences.
• Expertise in operating and maintaining Transformers, LV and MV switchboards, UPS, Motors, Frequency Converters, and power distribution systems.
• Familiarity with low-voltage systems, including Fire Protection, CCTV, PA, and network systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Job Highlights

===========

• Ability to upskill and learn new things
• Opportunities to try out and be exposed to new technologies
• Casual environment

Job Description

=============

• Operation of all audio-visual equipment with the aim to provide high quality technical standards
• Setup and Teardown of AV equipment at events
• Ensure that the audio-visual equipment is tested and in correct working order before use at an event
• Investigate equipment faults and recommend actions to rectify
• Maintain audio visual equipment including routine inspections and preventative maintenance
• Maintain a strong working knowledge of video and audio equipment, LED video wall, wireless technology, computers, projectors, and video conferencing equipment
• Coordinate integration with specialty audio visual equipment as needed
• Responsible for cord management & safe set up and dismantle
• Provide regular feedback to Company on communication issues and service improvements
• Liaison with project manager regarding the exact audio-visual requirements for events. This will include assistance with PowerPoint presentations, audio and video conferences

General Requirements

===================

• Singaporeans or PR ONLY
• Experienced AV Technician. Fresh ITE graduates from AV, events or related courses are welcomed to apply.
• Highly responsible, punctual and good time management
• Attention to details and well organised
• Good communications and interpersonal skills
• Team player with good discipline and working attitude
• Service-oriented mindset
• Versatile, willing and flexible to take on broad spectrum of tasks and new tasks
• Adaptable to changes, stress and last minute requirements
• Positive, can do attitude
• Calm and level headed
• Good problem solver
• Class 3 driving licences will be an added advantage

• Conduct regular PLC and control system maintenance to optimize performance.
• Monitor system performance continuously to achieve maximum uptime.
• Coordinate projects for automation improvements, ensuring seamless implementation.
• Identify and troubleshoot system abnormalities, offering technical solutions.
• Initiate and lead continuous improvement projects for enhanced efficiency.

Requirements:

• Degree in Electrical Engineering or equivalent.
• Minimum 2 years in related working experience.
• Experience in PLC systems.
• Experience in ELV systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Deliver professional nail services including manicure/ pedicure, extension and gel nail services
• Good excellent cleanliness and hygiene practices
• Recommending various nail designs and nail art to clients
• Evaluating the condition of clients’ nails and advising them on proper nail care and suitable nail care treatments
• Sanitizing all nail instruments and equipment before each use
• Ensuring that workstations are kept clean and orderly
• Ensuring that nail supplies are adequately stocked
• Advise clients on nail care and use of products and colors
• Promote and sell nail care products
• Schedule client appointments and accept payments
• Other duties as and when assigned

Requirements

• With or Without experience - Candidates with experience will be an advantage
• Able to work on weekends and PH
• Good communication skills and cheerful personality

Other Information:

• Good and comfortable working environment
• Annual leave and Medical benefits
• Basic Salary + Commission + Service point + Incentive

Our client is a Global MNC company in the Pharmaceuticals industry. Due to their current expansion plan, they are looking for a Production Technician to join their Production team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Note: This is a 1-year contract position, convertible.

Responsibilities:

• Responsible for overseeing/operating the company’s systems and equipment to meet the production requirements, ensuring adherence to the site’s safety standards and regulations
• Manage the necessary production materials, as well as other tasks such as cleaning and sterilization
• Handle the daily operations of the assigned manufacturing equipment
• Oversee strict compliance with the company’s HSE regulations, ensuring quality is being upheld
• Follow the company’s various SOP for proper material storage, as well as disposal of degraded/contaminated materials
• Record/Maintain data into the company’s inventory management system
• Execute the necessary cleaning and sterilization procedures when required
• Conducts calibration/pre-startup checks on the necessary equipment while following the company’s SOPs
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Permanent, 5 days, Kallang

Our client

Security solution and security system company (hardware software, manpower)

Year in business

25 years

Geographical exposure

Global

Product:

Integrated security management, Managed Services, Unified Security systems, 24hr Monitoring Center, robotics, video management solutions, identity management, VMS, Access Control, Situation Awareness, Corporate Security, Cybersecurity, Government Security, Public Security, School Security, Facility Security, Command Centers, Alarms Monitoring, Enterprise Security, Retail Security, Artificial Intelligence, Analytics, Managed Security, Smart city, IOT, and Monitoring

Job scope

· To lead a team of maintenance and service team members

· To allocate work load and manpower

· To manage client’s expectations for optimal results and foster relationship and Familiar with service deliveries standard

· Be responsible for operationally managing multiple aspects of the team.

· Hands on technical know how

Requirements:

· Min diploma in Electrical/Electronic Engineering

· 3 years working experience in security system/ extra low voltage system

· proficiency of security system configuration, application programming and integration with multiple brands.

· Technology savvy (hardware & software)

· Track record of Integrating of Security Management Systems, CCTV systems

· Track record of leading a maintenance and service team.

Work location :Redhill

Whats on offer

(1) Attractive package

(2) Stable Management

(3) Dynamic work environment

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Michelle Goh

EA License No : 22C1142

We regret that only shortlisted candidates will be notified.

Job Description

✅ 5 days

✅ Career growth

✅ Immediate, No need experiences

Job Scope:

Electrical Technician

• Install, maintain, and repair electrical systems, equipment, and components.
• Troubleshoot electrical issues and implement corrective actions.
• Perform routine inspections and preventive maintenance on electrical systems.
• Collaborate with engineers and other team members on electrical projects.
• Interpret electrical schematics and blueprints for installation and maintenance purposes.
• Ensure compliance with safety standards and electrical codes.
• Test and calibrate electrical systems to ensure proper functionality.
• Assist in the planning and execution of electrical projects.
• Keep accurate records of electrical maintenance and repairs.
• Stay updated on advancements in electrical technology and industry best practices.

Requirements:

• Diploma in any engineering or other disciplines
• Relevant experience will be added advantage

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the Engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process. ]

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 8 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 5.5 days a week and if required, including public holidays and weekends.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.

· Confined Space Supervisor and above.

· Work At Height Supervisor and above.

Ensure safe, smooth and uninterruptable plant operations.

Plant Operation

Support plant goals and objectives to achieve overall site KPI’s.

・Comply safety guidelines, SOP, policies and standards.

・Intergrade safety to all part of work and provide safety suggestions and improvements.

・Timely inform all unsafe activities, environmental release etc.

・Support shift activities includes but not limited to operation, frontline maintenance, plant start-up & shutdown and any other ad-hoc and urgent calls.

・Monitor and Operate Incinerators, boilers, turbine/generators and auxiliary systems includes but not limited to feed water treatment plant (Demin), compressed air system, fuel oil system, NH3 System, potable, rain and waste water systems etc.

・Perform shift logging and ensure equipment’s are operating within safe operating limits.

・Inform plant safety and other abnormal events timely.

・Involve in equipment/system isolation & normalization as part of plant activities.

・Respond to CCR alarms and perform frontline troubleshooting. Unresolved items raise maintenance notifications.

・Perform water sampling and ensure chemical injection system functionality as intended.

・Receive operation related chemicals, Lime, Fuel oil, NH3 etc.

・To assist operation & maintenance engineer in fulfilling their responsibilities.

・Carry out plant improvement activities.

・Maintain proper housekeeping as well as tidiness of work areas.

・To carry out any other duties as assigned by O&M Team.

・Oversee and handle maintenance activities as assigned during overhaul.

・Oversee and supervise external contractors.

Plant Optimization

· Identify safety improvement and implement energy & water saving initiatives.

· Assist maintenance team during maintenance.

· Monitor and keep track of utilities consumptions and generate reports as and when required

· Involve in Facilitate project works as well as plant improvement activities.

· Suggest and execute plant improvements initiatives.

Requirements

· NITEC / Diploma in Mechanical / Electrical / Industrial.

· Emergency Response Trained & First Aid trained.

· Confined space trained.

· Work at height trained.

To maintain the operational capability of the incineration plant such as performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery. Performing daily inspection on equipment to look out for anomalies and having good documentation on various records and reports for the maintenance operation. Candidate shall be equipped with the ability to understand system schematics and drawings.

Maintenance

· Ensure the plant day-to-day operation is functional at its optimum level.

· Assist the engineer and lead a team of skilled worker in the maintenance and expeditious repair of the plant’s mechanical equipment

· Performing scheduled maintenance such as preventive and predictive programs of the plant equipment and machinery

· Perform daily inspection on equipment.

· Analyze breakdowns, diagnose faults and execute the required rectification process. ]

· Take part in plant overhaul activities.

· Ensure close coordination with various parties for maintenance activities.

· To ensure that equipment maintenance & service procedures and programs are effectively implemented consistent with sound engineering practices.

· Ability to understand system schematics and drawings.

· Assist the engineer in any other duties as required.

Requirements

· Minimum Diploma in Mechanical or Electrical

· Minimum 2 years’ experience in Waste to Energy Plant

· Boiler Attendant / Steam Engineer Certification will be a plus

· Medically fit.

· Proficient with Microsoft Word, Excel and PowerPoint.

· Able to work 6 days a week and if required, including public holidays and weekends.

· Extended working hours might be required if urgent work needs to be done to machinery or plant.

· Shift work is not required.

· Team player that is proactive and able to work under pressure.

· Maintaining a positive outlook in the event of adverse condition.

· Process Plant WSH Supervisor Certificate and above.

Job Summary: The IT Operation and Maintenance Director is a senior leadership role responsible for overseeing, strategizing, and managing the operation, maintenance, and support of an organization's IT infrastructure, systems, and services. This position plays a pivotal role in ensuring the reliability, availability, and optimal performance of IT assets, while also providing leadership for the IT support functions. The IT Operation and Maintenance Director typically reports to the Chief Information Officer (CIO) or Chief Technology Officer (CTO).

Key Responsibilities:

1. Strategic Planning:Develop and implement long-term strategies for IT operation and maintenance that align with the organization's overall business objectives.
Establish and manage budgets, resource allocation, and performance goals for IT operation and maintenance.

2. Operation and Maintenance:Oversee the daily operation, maintenance, and performance monitoring of IT systems, networks, data centers, and other infrastructure components.
Ensure the highest level of system availability and performance while minimizing downtime and disruptions.

3. Team Leadership:Lead and manage the IT operation and maintenance teams, which may include system administrators, network engineers, helpdesk/support staff, and other IT professionals.
Recruit, mentor, train, and evaluate team members to maintain a high-performing and collaborative workforce.

4. Problem Resolution:Identify and resolve complex IT issues, incidents, and service disruptions through effective incident management and problem-solving processes.
Implement efficient troubleshooting and escalation procedures.

5. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
Maintain accurate inventories, ensure compliance with licensing agreements, and optimize asset utilization.

6. Security and Compliance:Establish and enforce IT security policies, procedures, and best practices to safeguard data and systems.
Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.

7. Disaster Recovery and Business Continuity:Develop and maintain robust disaster recovery and business continuity plans to protect against data loss and ensure the continuity of critical operations.
Regularly test and update these plans to accommodate changes in the IT environment.

8. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
Negotiate contracts and service-level agreements (SLAs), ensuring adherence to agreed-upon terms and high service quality.

9. Performance Monitoring:Implement comprehensive performance monitoring and reporting tools to proactively detect and address performance issues.
Analyze performance metrics and recommend improvements to enhance system and network performance.

10. Documentation and Knowledge Sharing:

• Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
• Develop operational manuals and encourage knowledge sharing within the team to enhance operational efficiency.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.

2. Experience: A minimum of 10-15 years of experience in IT operations and maintenance, with at least 5-7 years in a leadership or directorial role, is typically required.

3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a significant advantage.

4. Leadership and Communication: Strong leadership, team management, and communication skills are essential for effectively leading diverse IT teams and collaborating with various stakeholders.

5. Problem-Solving and Strategic Thinking: Strong analytical and problem-solving abilities to address complex IT issues and make strategic decisions that align with organizational goals.

6. Regulatory Knowledge: Understanding of relevant industry regulations, compliance requirements, and the ability to implement and maintain compliance measures.

7. Project Management: Proficiency in project management methodologies and tools is essential for ensuring the successful delivery of IT infrastructure projects.

The IT Operation and Maintenance Director plays a critical role in maintaining the integrity and reliability of an organization's IT infrastructure. Their strategic vision, leadership, and operational expertise are vital for ensuring the consistent availability, security, and performance

Job Description

• Industry/ Organization Type: Manufacturer (Cleaning Products)
• Position Title: Service Technician
• Working Location: Gul Crescent (Transport provided at Boon Lay, Lakeside, Chinese Garden, Yew Tee)
• Working Hours: 5 days (Monday-Friday, 8:15A M-5:30 PM)
• Salary Package: Up to $2650 + OT + AWS + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Responsible for outdoor and indoor repair work of all cleaning products.
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Work closely with service technicians for problem-solving and coordinating jobs between field service and workshop repairs.
• All other assigned duties.

APPLY NOW!!!

• Minimum Professional Certificate/NiTEC (Electrical & Electronic Engineering / Electrical Engineering)
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical is an advantage
• Understanding engineering drawing and schematic layout is essential
• Possess Class 3 driving license is advantageous
• Candidates without relevant experience are welcome to apply. Training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Our client is from Medical Manufacturing industry. They are looking for a Lab Technician to assist their team for the next phase of their business. They are located in West.

Duties:

• Support day-to-day activities in the chemistry laboratory, ensuring timely release of results.
• Manage chemical inventory and ensure adequate stock for testing.
• Handle laboratory administrative tasks, including glassware washing and data entry.
• Maintain and log laboratory sample records.
• Ensure timely submission of test reports and documentation. Assist in routine testing activities in the chemistry laboratory.
• Coordinate and perform daily log-in schedules for laboratory activities.
• Maintain a high level of 5S housekeeping in line with Good Laboratory Practice.

Requirements:

• Min 1 year of QAQC working experience in Manufacturing industry

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Job Summary: The IT Operation and Maintenance Manager is a critical role responsible for overseeing the ongoing operation, maintenance, and support of an organization's IT infrastructure and systems. This position plays a crucial role in ensuring the reliability, security, and performance of IT assets and services. The IT Operation and Maintenance Manager typically reports to the IT Director or Chief Information Officer (CIO).

Key Responsibilities:

1. Operation and Maintenance:Manage the day-to-day operation, maintenance, and monitoring of IT systems, networks, and infrastructure.
Ensure that IT systems and services are available and performing optimally, minimizing downtime and disruptions.

2. Team Management:Lead and supervise the IT operation and maintenance team, including system administrators, network engineers, and support staff.
Recruit, train, and evaluate team members to maintain a high-performing and cohesive workforce.

3. Problem Resolution:Identify and resolve IT issues and incidents promptly to minimize impact on business operations.
Implement effective incident management and problem-solving processes.

4. Asset Management:Manage IT assets, including hardware, software, licenses, and contracts.
Ensure accurate inventory and licensing compliance while optimizing asset utilization.

5. Security and Compliance:Implement and enforce IT security policies, procedures, and best practices.
Ensure compliance with relevant industry regulations and standards, and manage security audits and assessments.

6. Disaster Recovery and Business Continuity:Develop and maintain disaster recovery and business continuity plans to safeguard against data loss and ensure continuity of operations.
Conduct regular testing and updates of these plans.

7. Vendor and Supplier Management:Manage relationships with IT vendors, service providers, and suppliers.
Negotiate contracts, service-level agreements (SLAs), and ensure service quality.

8. Performance Monitoring:Implement monitoring and reporting tools to proactively detect and resolve performance issues.
Analyze performance metrics and recommend improvements.

9. Documentation:Maintain accurate and up-to-date documentation of IT systems, configurations, and procedures.
Create operational manuals for team reference.

Requirements:

1. Education: A bachelor's degree in computer science, information technology, or a related field is typically required. A master's degree or relevant certifications (e.g., ITIL, CISSP) may be preferred.

2. Experience: A minimum of 5-7 years of experience in IT operations and maintenance, with at least 2-3 years in a management or supervisory role, is usually required.

3. Technical Knowledge: Proficiency in IT infrastructure, network administration, system management, and security best practices. Familiarity with the organization's specific technology stack is a plus.

4. Leadership Skills: Strong leadership and team management skills, with the ability to motivate and lead a diverse IT team.

Job Description

• Industry/ Organization Type: Manufacturing/Interior Design
• Position Title: CNC Technician/Operator
• Working Location: Changi South
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for setting up, tool selection, operating multi-axis CNC machining, Fiber Laser Machining and inputting the programs as designed.
• Ensure that the CNC machine & Fiber Laser Machine operates in a safe, controlled environment.
• Responsible for loading and setting up.
• Perform basic preventive & corrective maintenance of the machine.
• Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.
• Maintain equipment by completing preventive maintenance requirements; following manufacturer’s instructions; troubleshooting malfunctions; calling for repairs.
• Machine-related general tasks.

APPLY NOW!!!

• Minimum Nitec in Precision Engineering or related field.
• At least 4 years of related working experience.
• Computer literate, and familiar with WoodWOP, Pytha, Art- CAM, Jdpaint, Solidworks, AutoCAD.
• Knowledgeable in the operation of CNC Machines & Fiber Laser Machines.
• Familiarity with Homag CNC Machines is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65253 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Our client is a one of the leading players in the FMCG industry. Due to business needs, they are now recruiting a Automation Technician to be part of their Logistics team to support their business needs. They are located in the West - easily accessible.

Job Description :

• Oversee the testing, operation, and upkeep of automated machinery.
• Sustain the performance and reliability of all automation and network systems within the automation layer.
• Analyze equipment reliability using error logs, event reports, and data from computerized maintenance systems.

Requirements:

• Min Nitec in Mechatronics, Engineering, or a related field
• Experience with automation control products such as Siemens IPC, PLC etc.
• Comfortable with rotating day and night shifts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

We are a cleaning company in Singapore looking for full time Supervisor with relevant experience.

The scope of work:
- Develop and implement cleaning procedures and policies
- Responsible for project management
- Periodic inspections to ensure compliance with cleanliness standards
- Order and maintain cleaning supplies and equipment
- Managing Your Cleaning Business Budget
- Develop and maintain relationships with clients and stakeholders
- Ensure compliance with health and safety regulations
- Monitor and report cleaning performance metrics
- Record worker's attendance/absence form.
- Hold a Singapore driving license.

Working time: 6 days, 8 am to 5 pm

The technician to be trained to perform basic on-line leak sealing of pipeline components, report directly to the operation manager during the on-job training (OJT) period. Trainee technician will be sent to attend Safety Course and trained to work in the Petrochemical OEM environment in Jurong Island or mainland Utilities, Pharmaceutical and the general manufacturing industries.

Main Responsibilities.

Produce Trial Batches for Hair Care Products, Skin Care Products and Home Care Products

Job Scope

• Conduct, verify and record daily calibration of weighing devices
• Set-up the relevant equipment to be ready for use prior to Batch Making according to SOP and Batch Production Record (BPR)
• Perform cleaning and sanitization of equipment and ancillary items
• Receive Raw Materials from Pre-weigh and verify relevance and accuracy of materials
• Execute equipment operation and raw materials addition following production instructions either supervised by researchers or independently
• Carry out completion procedures and equipment shut down
• Collect samples from Finished Product and label and perform measurements such as pH and rheology.
• Prepare Finished Product for collection by FP Warehouse.
• Update Batch Making record
• Prepare hazardous and general waste resulting from Batch Making for disposal
• Execute regular and periodic housekeeping regime that is aligned to cGMP standards
• Carry out basic maintenance and first level troubleshooting of equipment when required
• Liaise with Engineering Team for equipment maintenance and repairs

Work Experience

• No prior work experience required, and On-the-Job training will be provided.
• Some experience in Process Laboratory, Process Manufacturing, Biopharmaceutical Manufacturing will be preferred.

Minimum Academic Qualifications

• Higher NITEC in any discipline, preferrably in Chemistry related field.

Competency

• Customer Orientation: Work in teams, build relationships with customers to anticipate needs and solicit feedback to improve the customer experience.
• Collaboration: Contribute to a positive and cooperative working environment by fulfilling own responsibilities, managing interpersonal relationships and providing support to others to achieve goals.
• Communication: Communicate with others to share information, respond to general inquiries and obtain specific information.
• Decision Making: Follow processes to make decisions using given information and guidelines.
• Problem Solving: Identify problems and apply guidelines and procedures to solve problems.
• Language: Able to communicate in English both in written form and verbally.
• Computer Literacy: Possess basic skills in Microsoft Office suite of software.
• Able to operate simple machinery.
• Able to carry loads of up to 20 kg.