Carry out maintenance activities such as:

• Servicing of equipment such as centrifugal pump, diaphragm pump, replacement of mechanical seal, pump alignment, rigging & lifting.
• Perform repairs and other maintenance activities to specified specs and standards per procedure.
• Able to perform predictive maintenance and data collection for field equipment
• Able to perform QC equipment maintenance and troubleshooting such as freezer and incubator.
• Attend to equipment breakdown and preventive maintenance on short notice during weekends/public holidays.
• Support equipment inspection with vendor representative on tanks, column, pipelines and centrifuge as per RSTO Visual Inspections standards.
• Repair and replace damaged parts to bring equipment back into service timely to support continuous production planning.
• Perform minor piping modification and rebuild of MRO spare part.
• Perform polishing and passivation of vessel internal surfaces according to RSTO procedure.
• Maintain all machine shop tools and equipment such as, and not limited to, welding set, working tooling, lifting gear.
• To actively participate and perform workplace 5S housekeeping.
• Able to contribute and implement Safety Improvement Ideas for CI projects works together with System/Equipment Engineers.
• Perform tasks as defined in the Maintenance Work Orders for assigned equipment or system.

Safety, Health & Environment:

• Comply with all RSTO’s Safety, Health & Environmental (SHE) requirements, never put oneself and others at safety & health risks, and report any workplace accidents, near misses and hazards as soon as practicable.
• Observe all RSTO’s site security measures at all times, and report any suspicious characters/objects & damaged security mechanisms to Site Security immediately.

Lean Production System:

Embody PT Lean Production System (LPS), while demonstrating a continuous improvement mindset and behaviors through the use and application of LPS tools for continuous improvement initiatives.

Job Qualifications:

The following trainings shall follow the latest applicable WSH regulations

• Scissor Lift/Vertical Personnel Platform - Operator
• Confined Space Operation - Worker
• Work at Height – Worker

Job Requirements:

• Willing to perform shift hours as required.
• Minimum of 3 years working experience, including GMP and Pharmaceutical environment
• Proficiency in spoken and written English.
• Computer literate on Microsoft Office, Email operating system, CMMS software.
• Working experience in handling of hazardous chemical.
• Working experience in basic welding and fabrication work.
• Preferred working experience in handling of Electro-polishing Equipment.
• Preferred experience in operating digital video scope.
• Preferred experience in handling homogenizer and centrifuge equipment.
• Preferred work experience in GMP and Pharmaceutical environment.
• Able to interpret P&ID, LOTO mark-up drawings and perform physical Energy isolation processes.
• Able to perform confine space vessel related work.
• Able to support night shift and outside office hours as assigned by RSTO or Task Supervisor.
• Willing to accept 1-Year contract basis.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Location : Orchard

Work Timings : Shift work ; 930am to 630pm & 1300-2200 ; 5 days work week inclusive of weekends and PH

Industry : Retail

Salary : Basic + Allowances + AWS + VB

Job Description –Maintenance & Electrical Supervisor

Basically, your duties as a Maintenance & Electrical Supervisor are as follows:

a. Plan, co-ordinate and supervise the operation, maintenance, repair and implement improvement works to all M&E and Building service and refrigeration systems, including renovation and maintenance works.

b. Prepare and ensure schedules such as Maintenance Schedule, Repair Work Schedule and M&E Equipment Operation Schedule, and deadlines for events and installations works are met accordingly.

c. Carry out daily inspections and tests of mechanical and electrical equipments/ Plant/ BAS ACMV System:

• Check daily operation and implement periodic preventive maintenance programme

• Evaluate breakdown cause and provide temporary solution/s for (further) repair/ replacement works

• Oversee contractor’s work

d. Carry out research, design and advised on mechanically functioning plant and equipment such as machine tools, engines, heating, ventilating and refrigerating installations.

e. Prepare and generate the following reports:

• Consumable reports

• Utilities reports

• Expenditure reports

• Revenue reports

f. Provide technical advice to subordinates.

g. Study labour requirement, estimate cost of installations, operations, maintenance and repair.

h. Procurement of quotations and parts for repair/ replacement/ new installation works; check bill of quality and evaluate cost of quotation.

i. Co-ordination with contractors for renovation and new installation works, scope of works and quotation.

j. Plan and supervise construction installation, operation, maintenance and repair.

k. Check completed work to ensure compliance with specifications and safety standards.

l. Anaylze situation and introduce improvement works, repair and rectification works to department store.

m. Compile and vet M&E drawings for renovations to ensure it complies to all M&E regulations. Provide comments on renovation/ promotion counter drawings.

n. Any other job-related duties as and when assigned by the company.

Job Purpose

· Assist in the Operation, Management and Maintenance of Dormitory at 12 Pioneer Sector 1.

· Main Activities

o Manage, Monitor and Maintain all particulars of tenants and employers.

o Ensure occupants abide by all Dormitory Rules and Regulations.

o Manage and Supervise Dormitory Maintenance Workers on House Keeping Duties.

o Coordinate with various authorities on all FEDA compliance matters.

o Attend to inspections and report submission to all relevant authorities.

Duties and Responsibilities

· Oversee day-to-day Operation of Dormitory at Tuas HQ and 12 Pioneer Sector 1

· Ensure proper records of Tenant Particulars.

· Investigate root-cause of operation incidents and services failures and make recommendations to management.

· Continuously improve the SOPs to encourage higher productivity

· Manage clients and address their concerns on Well Being of their workers.

· To provide prompt and acceptable level of services to both external and internal customers while managing costs.

· Attending to government agencies.

Qualifications and Requirements

· Diploma in Management or equivalent.

· Min 10 years experience in Management of Foreign Worker Dormitories.

· Good interpersonal skills and team player spirit with BS Group of Companies, Service Providers and Clients.

· IT literate and proficiency in Microsoft Office applications (Word, Excel and Outlook).

· Ability to speak in Mandarin and English.

· Establish harmonious and effective working relationships both within and outside the organization.

· Ability to plan and supervise the work of subordinates to meet Management Goals.

· Demonstrated ability to work in a multi-cultural environment.

Working Conditions

Monday to Friday 8am to 5pm

Saturday 8am to 12pm

Technician Production Maintenance

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Technician Production Maintenance you are tasked to perform preventive and corrective maintenance of Compounding, Filling and packaging and to support project team activities at Tuas. In this role, a typical day will include:

Responsibilities

• Responsible for in-process and final product quality analyses/inspection in compliance with standards and regulatory requirements.

• Interprets and evaluates the analyses in terms of accuracy and precision compared against established specifications.

• Identifies on-going quality issues, prevents potential production issues, and makes suggestions for improvement.

• Uses various measuring devices, testing equipment, predetermined methods, operations, setups and prescribed specifications to accept or reject products.

• May work from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists.

What You'll Bring to Alcon

• Min Diploma in any Engineering studies

• 1-3 years of experience in preventive and corrective maintenance.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Senior Equipment Technician

• Salary: $2000- $2800
• Location: Gul Crescent [Company Transport @ Chinese Garden, Lakeside, Boon Lay]
• Working Hours: 8.15am - 5.45pm
• Working Days: 5 Days [Monday - Friday]

Roles & Responsibilities

• Outdoor and indoor repair of cleaning equipment e.g. road sweepers, ride-on auto-scrubbers
• Robot mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair.
• Ensure the workshop areas are kept clean and tidy at all times

Requirements:

• Diploma in electrical and electronic engineering
• With 3-4 years hand on repair and maintenance experience

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Scope :

Troubleshoot, service, repair, and maintenance of commercial kitchen equipment (Hot / Cold) and facilities; which includes refrigerator, lighting, kitchen equipment and plumbing facility.

1. Perform equipment installations, commissioning, modification, troubleshooting, repair, servicing and other technical support.

2. Complete documents to verify work performed when necessary.

3. Ensuring all works compliance with appliance standards and Health and Safety Act.

4. Advise the management team of critical systems that could be hazardous.

5. Ensure adherence to company standards and customer satisfaction.

6. Other works related.

Requirements :

7. With or without experience

8. Willing to learn

9. Driving license(class 3) with a good driving record to operate a commercial vehicle will be a plus.

10. Good physical condition, Good attitude, Team player

11. Willing to work overtime on Sunday & Public Holiday will be a plus.

12. Working hours : Mon-Fri : 9am-6pm, Sat : 9am-1pm

Entry level / Junior welcome apply

5 days work week / Permanent Role / Company transport provided

Full training provided !!

Job Responsibilities :
* Perform quality control analysis for in-coming, intermediate and final products
* Carry out calibration of equipment and ensure in working condition
* Ensure activities in the laboratory are safe
* Maintain up to date analysis reports

Job Requirements :
* Nitec / Diploma in Chemical Process Technology / Chemistry or equivalent
* Preferably with hand on experience in sampling, preparation and analysis for
liquid samples
* Prefer experience in handling laboratory analytical
equipment

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

The Electrical technician will exhibit exemplary safety and technical competence in all matters pertaining to electrical maintenance works on around the vessel. He is responsible for ensuring that he maintains competence to carry out allotted tasks.

Responsibilities & Standards

1. Maintain and adjust the condition of electrical assets: Electrical Systems, Equipment, UPS Batteries, Generators Switchboards, Motors, Wiring, Portable tools, etc

· Comply with relevant authorisation procedures, safe working practices and specific instructions.

· Complete maintenance in an agreed timescale, using safe and appropriate methods and agreed procedures.

· Ensure resources and spares are planned for and used cost effectively.

· Ensure the correct, current operating requirements are available for reference.

· Ensure any assets which have been maintained or had parameters adjusted still comply with specified operating requirements with minimum disruption and with the specified methods, tools and materials.

· Monitor and record any maintenance or adjustments accurately in work history in MMS.

2) Monitor And Assess The Performance And Condition Of Electrical Assets

· Obtain information or parameters from reliable sources. (Inspection ports, connections, vendor documentary information, instrument readings, diagnostic equipment.) using approved methods

· Use monitoring equipment or procedures correctly to assess the condition of electrical assets

· Ensure monitoring and checks are carried out in line with specified MMS timescales and schedules.

· Record and communicate monitored outcomes accurately and in timely fashion to raise the effectiveness of MMS.

· Compare current performance with previous assessments and take action where differences must be addressed.

3) Diagnose Faults in Electrical Assets

· Respond promptly to problems in line with approved procedures.

· Select appropriate tests and diagnostic procedures and apply them methodically.

· Determine the cause, nature and extent of problems in the performance and condition of electrical systems or assets.

· Use the results of inspections to determine the appropriate actions to take.

· Record an accurate and full description in the appropriate document history

4) Monitor and Maintain Pollution Control Measures.

· Sample and check that controlled process discharges from area of responsibility to the environment are within prescribed limits

· Identify and halt unplanned discharges where possible, and reported immediately according to policy, procedure and regulation.

· Equipment, waste or other materials for disposal are dealt with according to the correct procedure

· Ensure resources such as PPE, materials, tools and spares are accounted and not wasted or used inefficiently

5) Emergency Response

· Carry out Emergency Response Role

· Show competence during drills and exercises

Units of Competence

· See Training Matrix (HSEP Shipboard Manual)

· See Electrical Technician WAM (Vol. 2 Competence System Manuals) See Electrical Competency Manual No: 00.07.10.221

· Provide any additional duties as required by the OIM/Unit Spt. and /or HOD to maintain safe and efficient running of the Unit.

Qualifications and Experience

· Proven experience and qualified to ONC/ HNC, or NVQ Level 3 or recognised equivalent in Electrical Maintenance Engineering

· Minimum 5 yrs experience preferred, with 2 years offshore petrochemical experience desired

· Good knowledge of PTW, Electrical Isolation Standards, Risk Assessment and Man Management, Power Management System, Generation on LV

· COMP ex E'x' Course.

· Preferred courses: HV/LV Protection and HVLV Switching.

· Medically fit to offshore International standards such as ENG1 or equivalent.

Personal Skill

• Personal: Exemplary awareness of safety issues. Conscientious, flexible, versatile and determined.
• Leadership: Able to assist with operation of Electrical Power Generation and distribution systems. Good levels of written and spoken communication. Positive and assertive.
• Technical: High standard of analytical, diagnostic technical and professional knowledge on electrical systems, components and procedures.
• IT: Use Standard Management System ‘Office’ package electronic mail system and diagnostic software and equipment as required.

• Installs, inspects, maintains, and repairs various types and brand of all types of residential & commercial air conditioners.
• Performs regular preventive maintenance and corrective works on air conditioning system.
• Diagnoses electrical and mechanical defects and malfunctions.
• Carries out repair works such as replacement of air con compressor, fan coil motors etc.
• Perform servicing of air conditioning at customers’ residential and commercial premises that includes chemical washes, chemical overhauls, general maintenance services.

• Electrical & Electronics Engineering related
• Must have experience in aircon servicing 

• Training provided
• Yearly performance review
• We provide 16 days of annual leave, AWS, medical and dental benefits, along with insurance coverage to our employees

Responsibilities:

• Perform manufacturing defect diagnosis and analysis, provide timely feedback to respective line leaders, supervisor and engineer in the event of defect spike detected by the assembly line and test area.
• Support Test Engineer in executing evaluation work order, compile test reports so that all evaluation test reports are ready for engineer to analyse
• Actively involve in company wide Smart Lean initiative, seek improvement opportunities such as defect reduction and productivity improvement ideas. Implement and monitor the impact of the initiative, fine tune the implementation to get maximum benefit
• Create One Point Lesson for every critical defect detected related to workmanship, perform training to the operator to raise quality awareness

Requirements

• Min NITEC / Diploma in mechanical / Electrical or other engineering courses
• Min 2 to 3 years of testing / production technicial experience
• Experience in medical device industry

Interested candidates, pleaseInterested candidates please send your updated resume to:

[email protected]
Attn: Senior /Testing Technician (Medical Device/ Taiseng) #HKA

We regret to inform that only shortlisted candidates will be contacted

EA Personnel: Kayley Ng Yin Yi (R1762843)
Company EA Registration Number: Recruit Express Pte Ltd (99C4599)

Company’s Profile

A leading and established local company specializing in Geotechnical Engineering, and provides total solution for Geotechnical Instrumentation & Monitoring, Instrumentation Sales & Distribution and Soil Investigation & Laboratory Testing Services.

Location: Project Sites (Singapore)

Working Hours:

• 5 Days Work Week
• Mon to Fri, 9am-6pm

Benefits:

• Basic
• Variable Bonus

Responsibilities:

• Development and testing of Fibre-optics Geotechnical Instrumentation Systems, deployments, calibration, verification, etc.
• Involve in implement business plans including market analysis, growth strategy, sales projections and budgets
• Provide clear direction and leadership on all project operations and activities such as the plan, schedule, scope, and budget related to fibre-optics
• Provide technical support to systems once into operation after commissioning
• Conduct troubleshooting of Optical Nodes and instruments
• Involve in promoting products and services, and to liaise with clients, consultants, contractors and vendors to establish project requirements, restrictions and responsibilities
• Identify and develop strategic partnerships with complimentary service providers and Fibre-optics manufacturers, locally and internationally

Requirements:

• At least a Degree in Civil Engineering or Geotechnical / Instrumentation related field
• Preferably possess minimum of 5 years project management experience related to Geotechnical Instrumentation (Fiber-Optics)
• Candidates with adequate knowledge from the below will be highly advantageous:

1. Fiber Bragg gratings (FBG)
2. Stimulated Brillouin Scattering
3. Raman Scattering
4. Distributed Fiber Optic Sensing Technology
5. Brillouin optical time domain reflectometer (BOTDR)
6. Brillouin optical time domain analysis (BOTDA)

Your recruiter for this job: WhatsApp Ian @ 8512 3517 for a quicker response.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Facilities management companies providing diversified services which include maintenance and engineering, technical procurement and support, cleaning and ancillary services across retail, residential and commercial markets.

Responsibilities:

• Provide maintenance support, repair and services at various retail outlet island wide
• Hands-on attendance to repairs/complaints on mechanical and electrical, plumbing and sanitary services etc.

Requirements:

• Certificate/ Nitec in Mechanical & Electrical
• At least 1 year experience in Retail Facilities Management and RHVAC, Refrigeration maintenance are added advantages
• Available to work standby duties and overtime when required
• Willing to be flexible in a fast moving working environment
• Must have Class 3 Driving Licensee and must have been driving the last 6 months
• Training will be provided in AC and Refrigeration services

Others:

• Working hours: 8am to 5pm (5 days and 5.5 days’ work week)
• Remuneration Package - $2,500 to $3,000 (Basic) + OT
• Vehicle or travel allowance will be provided

With more than 30 years of history in the automotive industry, we are privileged to be able to provide premier automobile solutions to our loyal and steady clientele.

在汽车行业拥有 30 多年的历史，我们很荣幸能够为我们忠实的客户提供一流的汽车解决方案。我们正在寻找一位经验丰富且勤奋的人加入我们的汽车维修团队。您将负责诊断客户车辆问题并且进行维修。您也必须能够独立工作和在有需要时团队合作。

Why Join Us? 加入我们的福利

• New office building with integrated showroom and 16-bay workshop
• Clean, ventilated and brightly-lit working environment
• Learn to service vehicles of different makes and models (including light commercial vehicles)
• Family-like team members
• On the job training and mentoring will be provided
• Punctuality allowance, AWS and attractive bonus payout
• Marriage and birthday leaves available besides annual and medical leave
• Opportunity for internal promotion for staff with good performance
• 全新的汽車维修中心
• 干净整洁工作环境
• 学习维修不同品牌和型号的车辆（包括轻型商用车）
• 家人般团队
• 公司将提供在职培训和指导
• 准时奖励金、AWS 和花红奖金薪酬
• 除了年假与病假以外，公司也提供婚假和生日假
• 表现优越的员工将有内部升值机会

Core Responsibilities 主要职责:

• Vehicle inspection and production of technical report
• Service, advanced diagnosis and repair customers' vehicles
• Other ad hoc duties
• 车辆检验及报告
• 服务、高级诊断和修理客户的车辆
• 其他临时职务

Job Requirements 工作要求:

• Candidate must possess at least a Professional Certificate/NiTEC or equivalent
• At least 2 years of working experience in the related field
• Valid Class 3 driving license
• Able to produce quality work without supervision
• Able to work independently when needed, and also a dependable team player
• 至少拥有专业证书/NiTEC文凭或同等学历
• 至少 2 年相关领域的工作经验
• Class 3 驾驶执照
• 能够在无监督的情况下工作
• 能够在需要时独立工作，也是一个可靠的团队合作者

1) Trainee Techs

• PC literate
• No experience required
• Full course on the job training will be provided
• AWS Bonus + Insurance coverage

2) Technicians

• PC literate & some experience in other technical fields are welcome to apply
• Full course on the job training will be provided
• Candidates whom possess own motorbike will be an added advantage
• Salary will commensurate with experience
• AWS Bonus + Insurance coverage

3) IT Technicians

• Basic networking skill, Setup/Support/WLAN.
• Practical Training will be provided.
• Junior and Senior positions available.

We are a swimming pool maintenance service company looking a Full-Time Swimming Pool Technician.

Candidates that do not meet the following requirements may apply as well.

Job Scope:

• Maintain cleanliness of Swimming Pool and Water Features
• Clean, scrub and vacuum of pool
• Test pool water pH and chlorine levels
• Carry out the correct chemical dosages to the pools for treatment and sterilisation of the pool water
• Check the condition of the pool, pump, motor, filter and other fixtures for any damage or malfunction
• Service and fix faulty pool equipment
• Complete paperwork and service report
• Ad-hoc duties assigned

Requirements:

• Relevant working experience will be a bonus
• No experience required, on the job training provided
• Able to work outdoor/ under the sun
• Able to work independently
• Attend to work exigency
• Good interpersonal and communication skills
• Analytical and problem-solving skills

Working days:

• Monday to Saturday

Working Location:

• Islandwide

31/01/2024

Position - Veterinary Technician

Woodgrove Veterinary Services is looking for full-time veterinary technicians/nurses to join our team.

We are seeking an individual(s) who is experienced, caring, and passionate about working with animals. He/she should be hardworking, committed, and willing to learn on the job with excellent communication and interpersonal skills. Essential to work as a team.

Responsibilities:

· Assist and support veterinary staff during physical examinations and surgical procedures

· Handle and restrain a variety of companion animals for procedures

· Assist with running imaging and diagnostics which includes blood tests, urinalysis, and other pertinent lab tests

· Assist in reception duties and client communication

Prerequisites for application:

Proficiency in English and Mandarin
Diploma and/or Degree in a related field

Ability to handle and restrain animals

Prior experience in the veterinary field would be advantageous

Proficient in Microsoft applications

Remuneration:

$2500 to $3500 per month commensurate on experience and qualifications

Contact Us

If you are keen to apply or need more information on the position, kindly send over your questions and resume to [email protected]

Monthly Salary: $2000 - $2400

(With fixed allowance,Transportation & Shift allowance)

Working Hours: 12 Hours Rotational Shift (8 am to 8 pm, 8 pm to 8 am)

Rotational Frequency: 2-3 months once rotational

Location: Jurong

Additional Benefits: AWS & Bonus

Transportation: Company bus provided. (pick up point either at Boon Lay or Jurong East MRT)

Roles & Responsibilities

• Supports in various tasks, including repacking and identifying unlabeled drums of waste chemicals
• Follows safety rules and practices 5S
• Adheres to QESH-MS Work Procedures and SOP
• Maintains cleanliness in the work area, takes care of equipment, and aids in the maintenance program and operation of production machinery and equipment.
• Loading and unloading of cargoes, conducts chemical waste sorting, manages waste transfer, and maintains stock records.

Requirements

• Possession of a NITEC in Chemical Engineering or its equivalent
• A minimum of 2 years of pertinent work experience in a manufacturing environment
• A clean disciplinary record
• Readiness to work without shift duties for at least 2 months
• Familiarity with ESH regulations

To submit your application:

Click 'Apply Now' or reach out to Jaslin at [email protected] via email. Please note that only candidates who have been shortlisted will be contacted for further correspondence. Wishing you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Poh Chew Leng, Jaslin | R22108798

Jobscope Includes:

1) Aircon Servicing

2) Aircon Troubleshooting, Diagnostic, and Repair

3) Class 3 license will be good

4) Have working experience in Agent (manufacturer) will be an added advantage

5) Have experience in checking Splits, Multi Split, VRF, VRV systems

6) Independent in work

7) Good team player

ABOUT US

GAMA(ex-Navya) is a leading and innovative technology company that specializes in autonomous mobility solutions. With a mission to revolutionize the way people and goods move, we are dedicated to developing cutting-edge self-driving vehicles that are safe, efficient, and sustainable.

https://www.linkedin.com/company/gamamobility/

ABOUT THE JOB

Navya Systems Pte. Ltd. is seeking a dedicated Maintenance planner to join our Operations department. As the Maintenance planner, you will be responsible for coordinating and scheduling maintenance activities to ensure the optimal functioning of our vehicles. Your role will involve collaborating with our customers and various departments to understand the maintenance requirements and develop comprehensive maintenance plans. Additionally, you will be tasked with managing the stock of spare parts located in Singapore and Japan.

RESPONSIBILITIES

• Maintenance planning

- Assist the fleet supervisors in troubleshooting hardware issues

- Prepare the necessary equipment and materials for maintenance operations.

- Provide technical, administrative, and logistical support during maintenance operations

• Logistics

- Receive and inspect incoming supplies.

- Track and handle defective parts returned by customers, forwarding them to the relevant

teams for investigation and repair.

- Verify quantities, sort and organize inventory management for parts and equipment.

- Manage stock inventory and maintain real-time tracking using files or software.

• Continuous improvement

- Communicate procurement needs to the relevant teams.

- Assist in drafting and updating logistics procedures for Customer Services.

- Contribute to lessons learned and provide suggestions for technical and organizational

improvements.

Please note that the employee's duties, upon request and based on the required skills, may

occasionally involve other areas.

REQUIREMENTS

• Diploma

• Experience in logistics and/or automotive industry would be an asset

• Proficient in reading, speaking, and writing English.

SOFT SKILLS

• Detail-oriented and versatile.

• Strong affinity for technical environments and emerging technologies.

• Excellent communication and interpersonal skills.

DIVERSITY

At GAMA, we are dedicated to providing equal opportunities for all applicants, regardless of their background or characteristics. We believe in a fair and inclusive hiring process that considers individuals based on their qualifications, skills, and potential, without any form of discrimination or bias. Our commitment to equality ensures that everyone has an equal chance to succeed and contribute to our organization's growth and success.

Join GMM and be a part of shaping the future of transportation! If you are passionate about delivering exceptional customer service and thrive in a fast-paced, innovative environment, we invite you to apply for the position of Customer Service Officer. Together, let's make autonomous mobility a reality.

Responsibilities

• Enter prescription information including but not limited to: patient searches, prescriber searches, drug selection, prescription interpretation, insurance billing, and basic documentation.
• Dispense medicine when needed
• Accept customer and prescription information required to process new and refill prescriptions, including refill authorization from doctor offices.
• Retrieve medication from inventory.
• Create prescription labels and put them on prescription containers.
• Place medication into prescription containers.
• Complete paperwork related to filling prescriptions and input customer and prescription data into the computer.
• Assist with maintaining the Pharmacy department by keeping it clean and in order.
• Assist in inventory management processes including order review, inventory returns, restocking shelves, and physical inventory preparation.

Requirements

• Min Diploma in Pharmaceutical Science / Pharmaceutical Chemistry / Other relevant certification
• Meticulous and a team player
• Good communication skills
• Knowledge of MS Word, Excel

Interested candidates please send your updated resume to:

Attn: Pharmacy Technician (5 days office hours/ East, Up to $3500) #HKA

[email protected]

We regret to inform that only shortlisted candidates will be contacted

EA Personnel: Kayley Ng Yin Yi (R1762843)

Company EA Registration Number: Recruit Express Pte Ltd (99C4599)

Our client is a Global MNC company in the Pharmaceuticals industry. Due to their current expansion plan, they are looking for a Production Technician to join their Production team, in hopes of developing the current high performing team. They are located in the West – easily accessible.

Note: This is a 1-year contract position, convertible.

Responsibilities:

• Responsible for overseeing/operating the company’s systems and equipment to meet the production requirements, ensuring adherence to the site’s safety standards and regulations
• Manage the necessary production materials, as well as other tasks such as cleaning and sterilization
• Handle the daily operations of the assigned manufacturing equipment
• Oversee strict compliance with the company’s HSE regulations, ensuring quality is being upheld
• Follow the company’s various SOP for proper material storage, as well as disposal of degraded/contaminated materials
• Record/Maintain data into the company’s inventory management system
• Execute the necessary cleaning and sterilization procedures when required
• Conducts calibration/pre-startup checks on the necessary equipment while following the company’s SOPs
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

RecruitPedia Pte Ltd

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com.

Resonsibilities

• Performs visual and dimensional inspection of incoming and outgoing aircraft component parts
• Ensure parts are repaired according to the prescribed standards and procedures
• Responsible for incoming/ initial, in-process and final inspection of repairable parts/ components channeled into the cell and through the repair process to ensure conformance to related documents and required repairs
• Have available and understand current specifications involving inspection tolerances, limitations, and procedures established by the manufacturer of the product being inspected and with other forms of information
• Responsible for conducting the inspection in accordance with Regulatory approved technical data

Requirements

• Minimum Diploma in Mechanical / Manufacturing / Quality Management
• Minimum 1-year working experience
• Acceptable communication and interpersonal skill and ability to communicate with all levels
• Good understanding of technical drawing
• Familiar with the relevant airworthiness and regulatory agencies requirements
• Thoroughly familiar with all inspection methods, techniques, practices, aids, equipment’s and tools used to determine the quality of airworthiness of a part
• Proficient in the use of various types of inspection equipment and visual inspection aids
• Meticulous with an eye for details and adopts a hands-on approach

Why Join Us

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We provide structured on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together