Perform servicing on electronics equipment and testing using Multimeter and other instruments

Provide troubleshooting, repair, maintenance on Printed Circuit Board ( PCB ) , power supply & electroincs equipment

Perform electronics & electrical functional testing

Figure out and replace electronics faulty components, using soldering iron, sucker with proper type of spare parts replacements

Install electronics part into specified locations using proper hand tools and specifications

Perform documentation for repair success rate and spare parts inventory

Job Requirement:

Minimum NTC-3 in Electronics /Electrical related field; prefer Electronics related will be added advantage

Minimum 2-3 years of Electronics/electrical repair and experience in good soldering skill , repair of power supply, PCB

Strong knowledge of electrical circuit theory and advance soldering skills

Great interpersonal and customer service skills

Good logical thinking and attention to details

Self-motivated and independent

Window Installer
Working day: 6 days (9am-6pm)
Location: Lower Delta (near Tiong Bahru MRT)
Salary: $2,000 - $3,000

Job Scope:

• Responsible to install and troubleshoot window.
• Repair and or replacement of damage siding, shingles, fascia and window wrapping.
• Maintain a safe and clean job site.
• Follow daily schedule to complete installation tasks.

Requirement:

• Relevant experience

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description:

• Sound knowledge on various Electrical & Instrumentation system and equipment in industrial facilities ranging
• Above 200MW Power Plant / power generation, distribution,instrumentation, control and telecommunication system.
• 230KV GIS Installation & Commissioning
• Above 200MVA Power Transformer Installation & commissioning
• Supervisory and monitoring skill on electrical
• Construction and installation to ensure that all installation must be followed with project Specification, Design, Local Code and Standards.
• Commissioning and troubleshooting experiences in electrical system, PLC, DCS, Instrumentation, ELV system (Building Services).
• Liaise with consultants, clients, and subcontractors on the progress of Electrical work.
• To liaise with consultants and clients on the design of shop drawings.
• Attend technical and coordination meetings.
• Handle and resolve technical and engineering problems.
• Coordinate with other service providers to ensure smooth site installations.
• Prepare and submit reports of work site inspections or installations.

Requirements:

• Diploma & Degree in electrical/instrumentation engineering or its equivalent
• Min 5 - 10 years of relevant working experience in the Electrical construction field.
• Good knowledge of Electrical specifications & requirements
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines.
• Knowledge of AutoCAD (2D & 3D).
• Matured, Proactive leadership qualities, good communication and interpersonal skills are essential and willing to work longer hours based on project needs.
• Handling of ELV Systems (FA, PA, FI, ACS, CCTV, DIL).
• Quantity surveying & preparing the claims and submission.
• Installation of LV Distribution Panels.
• Coordination with Contractors, Instrument panels Installation, Testing & Commissioning works.

• Your primary responsibility is to provide technical assistance and support to end-users within the organization.
• Your role involves resolving hardware and software issues related to desktops, laptops, and other IT peripherals.
• You will be tasked with installing, configuring, and maintaining computer systems and ensuring they operate efficiently.
• Additionally, you'll assist users with technical inquiries, troubleshoot problems, and escalate issues when necessary.
• Provide remote assistance for off-site users using remote desktop tools.
• Assist users with login issues, password resets, and access-related queries
• Your goal is to ensure a smooth and productive computing environment for all employees, contributing to the overall efficiency of the organization

• Strong understanding of desktop operating systems (Windows, macOS).
• Knowledge of desktop hardware components and peripherals
• Install and configure desktop operating systems, applications, and software updates.
• Set up and troubleshoot hardware components.
• Excellent troubleshooting skills to diagnose and resolve technical issues.
• Ability to analyze and solve hardware and software problems efficiently.
• Ability to collaborate with other IT professionals and support teams.
• Share knowledge and contribute to the overall IT support function.
• Familiarity with remote desktop tools for providing off-site support

#techsupport #desktopsupport #itsupport #ittechnician #l1support #l1desktopsupport #technology #tech

Mechanical Technician Responsibilities:

• Assisting the mechanical engineer with mechanical design and maintenance tasks.
• Installing and performing diagnostic tests on mechanical systems.
• Developing and implementing mechanical maintenance plans to prevent costly equipment breakdowns.
• Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs.
• Documenting processes and maintaining mechanical service records.
• Monitoring the availability of parts and replenishing supplies.
• Optimizing mechanical efficiency by adjusting machinery and equipment settings.
• Training co-workers on the safe and efficient use of mechanical machinery and equipment.
• Maintaining a tidy work environment and adhering to industry regulations.

Mechanical Technician Requirements:

• Associates degree in mechanical engineering technology (MIT), or similar.
• A minimum of two years' experience as a mechanical technician in a related industry.
• Extensive knowledge of mechanical engineering designs, installations, maintenance, and repairs.
• Proficiency in mechanical design and diagnostic testing software.
• Exceptional analytical, critical thinking, and problem-solving abilities.
• Excellent communication and collaboration skills.
• Great organizational and time management abilities.
• Willingness to perform mechanical maintenance and repairs outside of business hours.

Job Impact & Requirement

The Laboratory Technician II will complete moderately complex analytical and laboratory testing in support of the food safety quality and operational teams. In this role, you will perform routine analysis of product testing and will check and monitor instrumentation performance, conduct tests and document results into databases and communicate test results.

Key Accountabilities

• Conduct routine quantitative and qualitative inspections and laboratory tests on raw materials, in process and final products independently and support more complex trials and experiments under intermediate supervision.
• Perform Environmental Monitoring - in-line swabbing, ATP swabbing and lab analysis
• Prepare medium and apparatus for microbiological analysis (environmental monitoring)
• Prepare samples and coordinate with 3rd Party Laboratory on the external microbiological laboratory testing for FGs, RMs, swab samples and as per customers’ requirements.
• Ensure compliance programs for all individual testing, which includes monitoring adherence to regulations and other procedural food safety compliance.
• Interpret and document results of tests into active databases and communicate results to internal customers as required.
• Run calibration checks, preventive maintenance tasks and simple repair to analytical instrumentation and maintain customer specifications books.
• Help develop food and feed safety, quality and regulatory culture and collaborate cross functionally to build, maintain and improve an effective food safety, quality and regulatory culture.
• Handle moderately complex clerical, administrative, technical or customer support issues under general supervision, while escalating more complex issues to appropriate staff.
• Other duties as assigned

Minimum Qualifications

• Possess technical and analytical skills in Quality Control
• Demonstrate analytical thinking and problem solving skills
• Possess a good sensory skills for product evaluation and troubleshooting
• Demonstrate ability to handle work professionally, independently and efficiently
• Possess attention to details

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

Benefits Summary:

• Up to $3200
• 5.5 days
• Working Location: Ubi

Responsibilities:

• Performing maintenance, repair including changing oil, checking fluid levels, and rotating tires
• Perform major repair on engine and transmission
• Test the functionality of parts and systems
• Adhere to defined guidelines in regards to safety, orderliness
• Other ad-hoc duties

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:
https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on WhatsApp for more details:
https://wa.me/6582693981

Follow us on Telegram for more job opportunities:
https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

• Engage in hands-on activities to conduct regular inspections and monitoring of various building services and facilities.
• Address breakdowns, respond to complaints/feedback, and attend to tenant service calls regarding building services and facilities.

Requirements:

• Nitec and above.
• At least 3 years of relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Title: R&D Laboratory Technician

Department: Battery Material Research (BMR)

Reporting Location: NTU-Durapower Advance Lithium Battery Joint Lab, #02-01, 1 Cleantech Loop, Singapore 637141

Durapower Technology (Singapore) Pte Ltd, a subsidiary of Durapower Holdings Pte Ltd, pioneers customized lithium-ion battery systems for applications such as electric vehicles, microgrids, and smart grids.

Roles & Responsibilities:

As an R&D Laboratory Technician at Durapower's NTU Laboratory, you will play a critical role in the Battery Material Research (BMR) team, with an emphasis on your expertise in disciplines such as Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or related fields. Your primary responsibilities will include:

Big Pouch Cell Fabrication & Optimization:

· Apply your knowledge in chemical or materials engineering to develop and optimize big pouch cell fabrication processes.

· Collaborate with cross-disciplinary teams to enhance the mechanical and chemical characteristics of big pouch cells.

IAF 30N Cell Fabrication & Optimization:

· Utilize your expertise in materials science or mechanical engineering to contribute to the fabrication and optimization of IAF 30N cells.

· Implement improvements with a focus on material properties and mechanical integrity.

IAF VDA Cell Fabrication & Optimization:

· Leverage your background in materials or chemical engineering to support the fabrication and optimization of IAF VDA cells.

· Innovate processes to improve the chemical composition and overall performance of IAF VDA cells.

Cell Fabrication & Testing SOP Preparation:

· Draw upon your knowledge in materials or chemical engineering to develop meticulous Standard Operating Procedures (SOPs) for cell fabrication and testing.

· Ensure SOPs align with the unique characteristics of materials used in lithium-ion battery technology.

Battery Testing and Report Preparation:

· Utilize your background in physics, materials science, or related disciplines to conduct thorough battery testing.

· Prepare comprehensive reports, emphasizing the physical and chemical aspects of battery performance.

Requirements:

· Minimally possess a Nitec/Diploma qualification

· Good academic and practical background in Chemical Engineering, Materials Science, Mechanical Engineering, Physics, or related disciplines.

· Prior experience working in a process laboratory will be ideal; cleanroom environment

· Effective communication skills to collaborate across multidisciplinary teams.

· Proven ability to apply theoretical knowledge to practical laboratory work.

· Timely and accurate completion of assigned projects, with attention to discipline-specific details.

· Proficiency in relevant software tools and techniques related to your field of expertise.

· Ability to speak, read Mandarin and English due to nature of laboratory process equipments

Join Durapower's forward-thinking team and contribute to the advancement of lithium-ion battery technology. Your specialized expertise in chemical, materials, or mechanical disciplines will be pivotal in driving innovation for sustainable energy solutions.

Job Scope

- Repair and installation of swimming pool pumps, water pressure tanks, filters and other equipment

- Respond to adhoc emergency breakdown of equipment

Job Requirements

- Minimum 5 years experience in installation of the above equipment

- Experienced in repair of above equipment

- Good understanding and experience on the electrical and mechanical systems

- Able to troubleshoot electrical system

- Minimum qualification Nitec or other equivalent certifications

- Hold a Class 3 license

Others

- Permanent, full time position for Singaporeans or PRs to apply

- Salary will be between $4.500 to $5,000, depending on experience

- Working hours are Mondays to Fridays, 8.30am to 5.45pm

- Overtime work, if any, will be compensated accordingly.

- Group Hospitalisation Insurance and medical benefits provided

- 14 days annual leave

Location: Beach Road

Working Hours: Monday - Friday 09:00 to 18:00

Job Description

• Coordinate and oversee all aspects of facility maintenance
• Manage relationships with external vendors and contractors to ensure timely and cost- effective facility repairs and maintenance.
• Develop and implement facility safety and security protocols, including emergency response
• procedures and regular safety inspections.
• Maintain accurate records of facility maintenance activities
• Assist in the planning and execution of office relocations, renovations, and space utilization projects.
• Act as the primary point of contact for facility-related issues and requests from employees.
• Monitor facility budgets and expenses and identify opportunities for cost savings and
• efficiency improvements.
• Collaborate with cross-functional teams to support company events, meetings, and special projects that require facility-related support.

Requirements:

• Experience in Facilities-related matters with detailed-minded.
• Strong PC literacy and proven ability to manage daily activities using various systems.
• Strong Customer Service focus and proactive
• Excellent people skills and ability to interact with a wide range of client staff and demands.
• Knowledge of Occupational Safety requirements

Interested candidate please click "APPLY"to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R1879511 (Serena Ho)

• Grow, maintain and transplant flowers, shrubs and trees
• Maintenance and installation of sprinkler systems
• Construct walkways, walls and small foot bridges
• Follows plans and specifications, inspects and directs the planting of landscape material associated with improvement, beautification, and erosion control
• Create and adhere to various watering and feeding schedules
• Plan new growth planting patterns in distinct seasonal changes
• Identify detrimental insects or plant disease and eliminate them
• Ability to adhere to a predetermined budget
• Operate a variety of mechanical equipment
• If certified or under the supervision of a certified applicator will apply chemicals

Requirement

• Primary/Secondary/’O’ Level Education with relevant landscape gardening experience.
• With WSQ Landscape Operation (Entry Level) Certification will be an advantage.
• No age limit with ability to work outdoors.
• Physically fit to handle tools and move around easily during work.

Working Hours and Office Location:

· 5.5-day work week

· Office location: Mandai Estate

· Work location: Various Sites

Responsibilities

• Daily routine testing of parameters for wastewater treatment plant (WWTP), which includes testing for PH, Chemical Oxygen Demand (COD) cell test, Conductivity, VOC & H2S, Fluoride, Chloride, Phosphate & Sulphate content using an Inductively coupled plasma mass spectrometry (ICP-MS), Cyanide, Phenol and Total Dissolved solids (TDS) from the various tanks in the plant.
• Presented and implemented a new Third-party water test standard form for lab technicians to use, that significantly reduced the amount of errors and risks of missing out a critical test when reporting to the National Environmental Agency (NEA).
• Conducted Daily maintenance and calibration for instruments and equipment throughout the lab.

Requirements

• Min Nitec in Mechanical/Chemical/Chemistry Engineering
• Min 2 years experience in Manufacturing/Semicon Company
• Strong experience in Waste Water/ Ultra Pure Water Systems

Interested candidates who wish to apply for the advertised position, please APPLY with an updated copy of your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

The jobscopes include:

1) Service of Airconditioner

2) Repair of Airconditioner

3) Good checking, trouble shootings skill in splits, and multisplit type aircon

4) Possess Class 3 License will be an added advanage

5) Have working experience in Agent (Manufacturer) will be added advantage

6) Good Team Player

• Monitor and coordinate timely arrival of spares to meet flowchart target
• Coordinate the arrangement of component loans or exchanges
• Liaising with customers, stakeholders and material department to provide solutions for all materials issues
• Prepare purchasing requisition for repair or procurement
• Create and update maintenance plans to meet compliance requirements
• Plan maintenance checks and prepare work packages
• Implement and monitor customer’s programs for modifications, special inspections and component removals
• Verify and confirm work requirements meet customer’s contractual, statutory and technical specifications
• Maintain configuration of customer’s rotables on aircraft & engines using the computerized database
• Minimum 2-3 years relevant experience
• Minimum qualification Diploma in Aerospace Engineering or equivalent.

We are looking for a Reliability Test technician’s role to perform reliability and first article tests in support for R&D projects. Additionally, the role will provide testing support to other functions within the company.

Responsibilities:

• Carry out testing of New Product or New Part for Reliability and First Article tests within the timeline of the projects
• Support test requests from other entities (Erlangen and Lynge) and
• Perform preliminary Failure Analysis as a result of the tests performed
• Carry out periodic checks, working with suppliers for preventive maintenance and calibration, including raise quotations, on test machines to ensure minimum downtime for the machines
• Ensure that the supplies needed for tests are available and up to date

Requirements:

• Able to operate Environmental test machines, Mechanical test machines and Acoustic test machines.
• At least 2 years in Reliability testing for electronic devices
• Proficient in MS Excel, Word, Powerpoint

Job Responsibilities:

• Support the Workshop Manager in managing the Taxi Maintenance operations and ensure all KPIs are met.
• Ensure operation costs including but not limited to material, manpower and operating are kept within the operation budget.
• Review and enhance the existing systems without compromising quality or service while optimizing cost.
• Manage and ensure smooth day-to-day operations.
• Produce statistics and reports, to review performance and recommend procedural enhancement for discussion
• Establish, implement and monitor safe working practices and procedures.
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations.

Job Requirements:

• Degree holder in Mechanical / Electrical / Electronic Engineering discipline or equivalent qualification
• Minimum two years experience in operations environment in Automotive Industry
• Able to build effective relationship with cross-divisional teams
• Proven tactfulness in communicating with others and constructively resolve challenges
• Excellent interpersonal and communications skills

• Guide and assist in planning and management of all renovation projects.
• Liaise with other departments and clients.
• Provide customers with technical support and solutions as well as providing feedback to management and customers on progress of work.
• Identify and evaluate projects and maintenance regimes.
• Monitor and update list of legal requirements.

Requirements:

• Degree in Mechanical/ Electrical / Civil Engineering or related field.
• Min. 6-7 years of relevant working experience.
• Familiar with Architectural / Mechanical & Electrical drawings.

** We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

More Information:

• Mode of Employment: Permanent Employment [Direct headcount]
• Company: Reputable International Engineering (Facilities Management) Service Provider Organization
• Working Location: CBD Area
• Working Hours: 5.5 Working Days per week (8.30 AM – 5.30 PM on full day & 8.30 am – 12.30 PM on half day)
• Benefits (on top of basic): OT allowance & Annual Bonuses (AWS & Performance)

Responsibilities:

• Perform daily operational activities such as:
• Preventive and Breakdown maintenance activities (of all ACMV related equipment) in accordance with safety guidelines
• Safe keeping of Hand-tools & practicing good housekeeping habits
• Providing technical advices & assistances for all maintenance functions
• Preparing routine & post-job service reports
• Attending to customers' enquiries/ requests.
• Other related/ ad-hoc tasks as assigned

Requirements:

• Possess NITEC in Mechanical, Electrical, Electronic or related
• Comfortable to work 5.5 working days/week (with rotating shift arrangement)
• Advantageous to have, but not a must have: 2 Years (or more) in ACMV Management (ACMV Equipment, Chillers, Switchboard & Generators)

[Those without prior working experience are welcome to apply too (On-The-Job Training will be provided)]

To Apply, please kindly email your updated resume to [email protected].

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our internal resume database for future opportunities.

APBA TG Human Resource Pte Ltd (14C7275) || Yadanar Su Mon (R1549384)

Job duties:

• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Scope

• To conduct laboratory tests
• To handle samples and testing samples
• To assist in laboratory duties such as equipment maintenance, maintaining inventory, purchase of consumables and preparation of laboratory reagents/supplies, including laboratory cleaning and waste-disposal.

Requirement

• Prior experience with lab work especially molecular biology
• Diploma in Medical Technology / Life science related

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Working Location: Jurong Island

Responsibilities:

· Assist the occupier of the worksite to identify any unsafe condition in the worksite or unsafe work practice which is carried out in the worksite

· Recommend to the occupier of the worksite to implement such reasonable practicable measures to remedy the unsafe condition or unsafe work practice

· Enter, inspect and examine at any reasonable time the worksite

· Inspect and examine any machinery , equipment , plant installation or article in the worksite

· Require the production of worksite records, certificates, notices and documents kept or required to be kept under the act, including any other relevant document, and to inspect and examine any of them

· Assess the level of noise, illumination , heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work

· Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite

· Liaise closely with site operations staff and Project Manager on all safety and health issue

· Any other duties assigned by the Project / Site Manager

Requirements:

· Minimum 1- 2 years of relevant Safety Coordination Work experience in construction industry

· Candidate must possess relevant certificates (E.g:WSQ Advanced Certificate in WSH (Level B/WSH Coordinator).

· Additional certificates related to safety are preferable such as Lifting Supervisor Safety Course, WAH Supervisor Course, Occupational First Aid Course etc

· Proficient in MS Office (Word, Excel & PowerPoint)

· Good communication and interpersonal skills.

· Able to work independently and at the same time be a team player

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work

Your primary duties include scheduling and coordinating maintenance, repair, and refurbishment of Bedok Methodist Church’s (BMC) building, equipment, and facilities; responding expeditiously to emergency maintenance; and monitoring our long-term contractors’ work performance.

In addition, you will also work closely with the Operations Manager on Request for Quotation (RFQ) processes, assist the Property Committee in evaluating and awarding contracts, and follow through with contracts awarded.

You will work five days a week including Saturdays, and weekday evenings where necessary.

RESPONSIBILITIES

1. Conduct inspections and identify areas in BMC requiring maintenance, repair, or refurbishment (including but not limited to: electrical, mechanical, plumbing, and carpentry works) and schedule and coordinate the works accordingly.
2. Monitor the expiry of licenses including but not limited to: Energy Market Authority (EMA) licenses, lift permits, Licensed Electrical Worker (LEW) certification, building inspections, and electrical switchboard inspections.
3. Work closely with Operations Manager on Request for Quotation (RFQ) processes, assist Property Committee in evaluating and awarding contracts, and follow through with contracts awarded (including but not limited to: conducting technical briefs, monitoring sub-contractors to ensure timely and proper execution, Workplace Safety and Health).
4. Maintain equipment loans and their status and maintain schedule for servicing and repairs.
5. Liaise with cleaning contractor, initiate discussions on cleaning schedules and cleaners’ performance, and conduct joint inspections.
6. Keep sufficient supply of washroom products (including but not limited to: toilet rolls, paper towels, tissue boxes, hand soap and sanitisers).
7. Be familiar with locations of electrical distribution boards, plumbing valves and stop valves.
8. Be familiar with the alarm system and CCTV system, and assist in disarming BMC Sanctuary as well as opening rooms for church events.
9. Be familiar with fire alarm panels and work with Fire Safety Manager to comply with SCDF requirements.
10. Periodically inspect BMC premises to eliminate potential breeding spots and liaise with National Environment Agency (NEA) during ground inspections.
11. Monitor and supervise gardening contractor and gardening works.
12. Respond promptly to and report emergency breakdown and calls for assistance.

REQUIREMENTS

1. A relevant Polytechnic or Institute of Technical Education (ITE) diploma, or qualifications in building maintenance, with at least three years of proven experience in facility maintenance work.
2. Able to do minor plumbing and electrical repairs.
3. Responsible, honest, reliable, and hardworking.
4. Conscientious in achieving good housekeeping, with a systematic approach for a clean and organized workplace to enhance productivity.
5. A team player with the ability to work independently.
6. Excellent interpersonal and communication skills to work with church leaders and members, Bedok Methodist Preschool (BMP) staff, and visitors.
7. Basic Microsoft Office skills.
8. Able to commence work immediately or within short notice.