Roles & Responsibilities

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

-DIPLOMA holder with about 4 years’ experience

-experience in design and implementation.

-Able to multi-task and work in a fast paced environment

-Possess initiative, drive and ability to work independently

-Good interpersonal/communicational skills

-Experience as a consulting in the construction industry is a pre-requisite

Main Duties and Responsibilities

We are seeking experienced and highly technically proficient individuals to join us as Duty Engineers. Joining as part of the Mandai Rainforest Resort by Banyan Tree’s pre-opening team, our Duty Engineers will be responsible for ensuring the smooth operations and maintenance of the Resort’s facilities, including all technical systems.

Key Responsibilities

• The Duty Engineer will conduct regular inspections of the Resort to determine maintenance requirements, upgrades and improvements. In performing this role, the incumbent will be responsible for reporting any incidents to the Assistant Chief Engineer.
• Resolve any maintenance matters reported by guests or staff. This includes coordinating with the Front Office and Housekeeping with regards to specific maintenance activities and ensuring that any identified matters are resolved in an efficient and timely manner.
• Responsible for ensuring that all rules and regulations regarding safe working practices are complied with.
• The Duty Engineer will also conduct the needed preventive maintenance activities when required. This includes liaising with the Assistant Chief Engineer to ensure the necessary inventory, spare parts and other equipment are readily available.

Job Requirements

• Diploma, Higher NITEC, NITEC in Electrical, Mechanical, Plumbing or an equivalent professional certificate.
• Minimum 3 to 5 years’ experience in a similar capacity, preferably in the hospitality industry. Pre-opening experience would be useful.
• Able to work and coordinate with contractors in all work-related activities.
• Able to commit to after office hours duties when required and/or shift work.

Main Duties and Responsibilities

We are seeking an experienced and dedicated Assistant Chief Engineer to join the pre-opening team for the Mandai Rainforest Resorts by Banyan Tree. Possessing strong technical skills and leadership abilities, the incumbent will support the Director of Engineering to maintain all the Resort’s facilities, ensuring all engineering systems are functioning efficiently.

Key Responsibilities

• Assist the Director of Engineering in overseeing the daily operations of the Engineering Department, including maintaining and repairing the Resort’s equipment and systems. In performing this role, the incumbent will conduct routine inspections, determine appropriate rectification measures and ensure ongoing preventive maintenance.
• Ensure adherence and compliance with all engineering related regulations as well as safety, health and environmental standards. The Assistant Chief Engineer will be responsible for establishing and updating emergency procedures, conducting regular inspections and maintaining records.
• Cultivate a strong people culture by investing in the coaching and development of team members. The Assistant Chief Engineer will take ownership of people-management matters for the department including recruiting, upskilling and mentoring team members. This includes coaching team members to ensure that all day-to-day operational matters are handled on time and that guest expectations are met.

Job Requirements

• Degree or Diploma in Engineering, Facilities Management or a related field.
• Minimum 2 years’ experience in a similar capacity, preferably in the hospitality industry. Pre-opening experience and Fire Safety knowledge would be useful.
• Proven track record in maintenance and knowledge of electrical, plumbing and other mechanical systems. This includes the ability to interpret technical manuals, blueprints and other related documents.
• Able to commit to after office hours duties when required and/or shift work.
• Able to work and lead contractors in all work-related activities.
• Strong interpersonal, communication and organizational skills.

• Reporting to General Manager and oversee the daily quality activities including involvement in new project development relating to technical and non-technical operations

• Establish quality strategies and policies; implement World-Class quality engineering and validation tools and systems.

• Manage Quality Assurance systems and activities in partnership with other key functional groups to ensure reproducible product quality and compliance.

• Oversee Quality System management, production & mold manufacturing quality controls and project qualification activities.

• Assign personnel to support Program Manager in executing project implementation.

• Appraise employees and provide direction for continuous growth each year for the development of significant technical expertise.

• Plan and execute quality control activities; organize QA staff according to work requirements, ensuring manufacturing effectiveness and efficiency.

• Support Business Development in the pursuit of new business opportunities.

• Ensure compliance to all applicable quality systems.

• Recruit, train, develop and lead staff to accomplish quality goals and adhere to quality policies.

• Plan and lead in company-wide training initiatives for quality system and QA activities.

• Provide interface to customers' Quality Compliance organization to ensure that project team complies with customers' requirements.

Requirements:

• Diploma/ Degree in Quality Engineering or related fields.

• At least 5 to 7 years of relevant experience in quality management systems in a manufacturing environment. Understands audit procedure, process controls and ISO certification procedure. Experiences in plastics/mold making industry advantageous

• Knowledge and experience in GD&T, SQC tool and ISO 9001, ISO 14000 & ISO 13485 QMS

• Good verbal and written communication skills

• Organized, decisive, independent leader

• Office: Joo Koon/Boon Lay | Mon – Fri (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Roles & Responsibilities

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
In-process yield/reject/scrap rate monitoring.

Requirements

Minimum two years of relevant experience in Toy Furniture Manufacturing Industry
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of craftman work
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms

Job Description

• System Application Maintenance & Support in Cloud

- User support and problem resolution

- User training

- Corrective maintenance

- Adaptive maintenance

- Preventive maintenance

• System Application Operation and Administration in Cloud

- Application deployment

- User access control matrix review

- Audit reviews

- Audit reviews

- Documentation

- Configuration management

- Performance monitoring

- Maintenance of UAT & Production Environment

• Collaborate with IT security consultant and perform regular system security /application fixing/ patches on a timely basis.
• Perform incident investigation and resolution, and root cause analysis and problem resolution.
• Coordinate with IT Infrastructure and Operations Manager for capacity and availability management.
• Monitor IT tickets and provide appropriate resolution on a timely basis.

Requirements

• Diploma/Bachelor’s Degree in Computer Science/Information Systems, Engineering (Computer/Telecommunication), or equivalent.
• Experience with cloud technologies – AWS, Azure, or Google Cloud.
• Hands on experience in managing cloud infrastructure and native services.
• Familiar with Linux/Unix and/or Microsoft Windows Server command line tools
• Proficiency in troubleshooting and resolving technical issues.
• Proficiency with automation & configuration management tools.
• Experience with Docker/Kubernetes/IAC frameworks is a plus.
• Working knowledge of DevOps software development tools and methodologies is an advantage.
• Applicants with programming experience are preferred
• Able to work after office hours depending on project needs.
• Good attitude and health

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As device modeling engineer, the candidate is to analyze/interpret test results, develop and deliver SPICE models for Process Design Kits development. Candidate should have strong interests and willing to learn Semiconductor physics and able to work with various departments/customers to deliver final product or to resolve issues. The quality of our delivery plays an important role in a customer’s 1st time design success.

Your Job:

● Analyze and represent semiconductor devices with industry standard models.

● Applies knowledge of semiconductor physics and devices to evaluate and analyze test results

● Works closely with device and other modeling engineers to interpret test results and debug device and measurement issues

● Prepares reports summarizing results or to make technical recommendations.

● Work and collaborate other projects and/or assignments as needed

● Some basic programming is needed for data analysis. Preferred python

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications:

● Education BS in Electrical Engineering, MS in Electrical Engineering

● Years of Experience : 2

● Please indicate % of travel 0%

● Fluency in English Language – written & verbal

● Open to candidates with no experience

Preferred Qualifications:

● Bachelor's in Electrical & Electronics Engineering

● Master's in Electrical & Electronics Engineering

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction

This job posting is looking for TD Process Integration engineer to work on differentiated technologies development and integration in, not limited to, 130nm through 40nm technodes. Position will include defining, developing, and implementing new differentiated technologies, driving the process development of new added features, interfacing with support/module teams and/or customers, driving towards qualifications and technology release for production.

Your Job​

• Driving the development (design and process) of new differentiated technologies such as precision passive devices, advance sensors, and niche products as added features.
• Execute and characterize the experimental splits to optimize the process margin and demonstrate the functionality and manufacturability of the new differentiated technologies
• Involved in new products tapeout and setup in proto lots to demonstrate functionality
• Run DOE and design experimental split plans for various tape-outs/products
• Identify and resolve process integration, design issues, and ET related problems

Required Qualifications:

• Degree in Microelectronics/Electrical/Electronics/Chemical Engineering or Science in Physics/Material Engineering or related field
• Basic Understanding of device physics / electrical characterization / Failure Analysis
• Fluent in English Language both written & verbal and good presentation skills
• To work in GLOBALFOUNDRIES Singapore (100%)

Preferred Qualifications:

• Knowledge on silicon micro-fabrication process such as Lithography, Etch, PVD, CVD, etc will be an added advantage
• Good interpersonal skill, tactful, resourceful, possess initiative, good presentation skills
• Strong analytical, presentation and problem-solving skills using statistical tools such as JMP
• Able to perform under face paced and challenging environment
• Experience in any scripting & automation languages is a plus
• Good attention to detail, well organized and a strong team player who can work well with cross-functional team environment.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As device modeling engineer, the candidate is to analyze/interpret test results, develop and deliver SPICE models for Process Design Kits development. Candidate should have strong interests and willing to learn Semiconductor physics and able to work with various departments/customers to deliver final product or to resolve issues. The quality of our delivery plays an important role in a customer’s 1st time design success.

Your Job:

• Analyze and represent semiconductor devices with industry standard models.
• Applies knowledge of semiconductor physics and devices to evaluate and analyze test results
• Works closely with device and other modeling engineers to interpret test results and debug device and measurement issues
• Prepares reports summarizing results or to make technical recommendations.
• Work and collaborate other projects and/or assignments as needed
• Some basic programming is needed for data analysis. Preferred python

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Bachelor's in Electrical & Electronics Engineering or Masters degree
• Min 2 Years of Experience
• Open to considering candidates with no prior experience
• Please indicate % of travel 0%
• Fluency in English Language – written & verbal

Preferred Qualifications:

• Master's in Electrical & Electronics Engineering

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As device modeling engineer, the candidate is to analyze/interpret test results, develop and deliver SPICE models for Process Design Kits development. Candidate should have strong interests and willing to learn Semiconductor physics and able to work with various departments/customers to deliver final product or to resolve issues. The quality of our delivery plays an important role in a customer’s 1st time design success.

Your Job:

• Analyze and represent semiconductor devices with industry standard models.
• Applies knowledge of semiconductor physics and devices to evaluate and analyze test results
• Works closely with device and other modeling engineers to interpret test results and debug device and measurement issues
• Prepares reports summarizing results or to make technical recommendations.
• Work and collaborate other projects and/or assignments as needed
• Some basic programming is needed for data analysis. Preferred python

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications

• Bachelor's in Electrical & Electronics Engineering or Masters degree
• Min 2 Years of Experience
• Open to considering candidates with no prior experience
• Please indicate % of travel 0%
• Fluency in English Language – written & verbal

Preferred Qualifications:

• Master's in Electrical & Electronics Engineering

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction

This job posting is looking for TD Process Integration engineer to work on differentiated technologies development and integration in, not limited to, 130nm through 40nm technodes. Position will include defining, developing, and implementing new differentiated technologies, driving the process development of new added features, interfacing with support/module teams and/or customers, driving towards qualifications and technology release for production.

Your Job​

• Driving the development (design and process) of new differentiated technologies such as precision passive devices, advance sensors, and niche products as added features.
• Execute and characterize the experimental splits to optimize the process margin and demonstrate the functionality and manufacturability of the new differentiated technologies
• Involved in new products tapeout and setup in proto lots to demonstrate functionality
• Run DOE and design experimental split plans for various tape-outs/products
• Identify and resolve process integration, design issues, and ET related problems

Required Qualifications:

• Degree in Microelectronics/Electrical/Electronics/Chemical Engineering or Science in Physics/Material Engineering or related field
• Basic Understanding of device physics / electrical characterization / Failure Analysis
• Fluent in English Language both written & verbal and good presentation skills
• To work in GLOBALFOUNDRIES Singapore (100%)

Preferred Qualifications:

• Knowledge on silicon micro-fabrication process such as Lithography, Etch, PVD, CVD, etc will be an added advantage
• Good interpersonal skill, tactful, resourceful, possess initiative, good presentation skills
• Strong analytical, presentation and problem-solving skills using statistical tools such as JMP
• Able to perform under face paced and challenging environment
• Experience in any scripting & automation languages is a plus
• Good attention to detail, well organized and a strong team player who can work well with cross-functional team environment.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Summary

The design engineer is responsible for the timely and accurate preparation of design and documentation required to enable the project team to deliver projects on time, within budget, and to the client’s satisfaction.

Duties/Areas of Responsibility

• Draft and prepare shop drawings of the given structures, components and devices
• Possess a strong understanding of ACMV principles, including ventilation rates, duct sizing, pipe sizing, and equipment selection.
• Review design specifications, measurements, and drawings to participate in the process of solving on-site problems or design changes
• Develop accurate and detailed 3D BIM models of ACMV systems, including ductwork, piping, equipment, and components, based on the specifications and calculations (heat load, ESP, Pump friction loss, assist and coordinate with the project team to provide architectural design and technical solutions.
• Assist in the preparation of submission drawings complying with various authorities' guidelines.
• Collaborate and communicate effectively with the Project in charge to ensure timely task completion.
• Strong analytical and problem-solving skills with the ability to troubleshoot and resolve design issues
• Assist the Project in-charge in determining the project schedule
• Follow company policies and ISO procedures to ensure quality services
• Any other duties as required and assigned.

Job Requirements

• Minimum must have 2 years Singapore-based ACMV experiences
• Possess adequate qualification in Mechanical Engineering
• Experience in handle multiple projects simultaneously
• Knowledge of industrial codes, standards and procedures
• Proficiency in Revit MEP, Naviswork and other related BIM software, MS Office, AutoCAD, Autodesk Application, E20 software, etc.
• Able to work with fast pace environment
• Positive attitude and organise
• Willing to learn

Job Description

• To participate in the development of a large-scale web application using Microsoft .NET Framework and SQL Server.
• Understands functional requirements from stakeholders and business analysts, and perform impact analysis.
• Develop, unit testing and system integration testing of the application components.
• To support code merging, code compilation and deployment to Development, UAT and Production environments.
• Provide and update software documentation.
• Provide operational support for existing systems by investigating reported issues and resolving them.

Requirements:

• Degree in Computer Science or relevant.
• Minimum 2 years working experience in software development using .NET 4.5, C#, ASP.NET, T-SQL using SQL Server 2012 and onwards.
• Have experience in end-to-end software development life cycle.
• Knowledge in web front-end technologies such as CSS, JavaScript, JQuery, etc.
• Knowledge in code version control process and continuous integration process are required.
• Strong analytic skills and problem-solving skills are required.
• Good interpersonal skills and ability to work in a team-oriented, collaborative environment.
• Good written and verbal communication skills in English.
• Knowledge in Java and Oracle is preferred, but not required.
• Candidates with longer and relevant working experience may be given senior roles.
• Candidates with experience in technical architecting and design may be given lead roles.

NOTE:

By submitting your Curriculum Vitae (CV)/Resume, you agree to your data being used in conjunction with recruitment and employment purposes.

In order to maximize your opportunities to work with us, you are encouraged to keep the information provided accurate, complete and up-to-date.

We do not collect any of the following:
1) NRIC/FIN
2) Photo
3) Date of Birth
4) Age
5) Spouse/Family information

Location: Woodlands

Salary: $4000-$5500

US MNC

Have AWS & Bonus

Job Description

• Offer technical support and expertise advice to customers (both internal and external) on product selection, solutions and other applications knowledge.
• Do regular site visits as part of field learning experiences and also to help troubleshoot issues as necessary.
• Work with sales team to provide customers with product demonstrations and company presentations, technical solution and products offer.
• Work with global application team to maintain close coordination and cooperation, access to product related information and seek for technical support when necessary.
• Participate actively in knowledge exchange through global forums and case studies.
• Conduct necessary technical training to customers, distribution partners and internal team
• To support the sales team in spec-in activities with the best solution, as well as reviewing project technical/testing specifications
• Work with QC team on product defects/issues/technical aspects
• Other ad hoc duties assigned by the supervisor.

Professional Qualifications

• Bachelor’s degree/Diploma in Mechanical/Manufacturing and Engineering is preferred.
• Mechanical design engineer welcome to apply!

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Job description

Roles and Responsibilities

• Work closely with the Management, Manager and teams to determine the materials and processes needed to cover the production demand.

• Establish daily٫ weekly and monthly objectives and communicate them to employees

• Assign workers to each production activity and monitor their work to ensure that they finish on time and within the quality standard.

• Address issues immediately when they arise so as to reduce disruption to the production.

• Perform quality checks and control on the production throughout the various stages of production.

• Provide quality output.

• Ensure no quality issue for the end products.

• Guide and coach new employees٫ monitoring their productivity.

• Oversee safe use of equipment and schedule regular maintenance.

• Prepare reports on performance and progress and present them to senior Managers or Management.

• Detect issues in efficiency and suggest improvements.

• Ensure good housekeeping of the production areas and promote safe work practices at all times.

• Ensure strict adherence to safety guidelines and company standards.

• Any other ad-hoc duties or projects as and when assigned by the Manager or Management.

Job Requirement:

• Candidate must possess at least Diploma or degree in Mechanical engineering or equivalent.

• At least 1 to 2 Year(s) of working experience in the related field is required for this position.

• Demonstrated ability to work in a team environment

• Ability to communicate effectively with co-workers, both orally and with written correspondence

Key Responsibilty

1. Project Assistance:

• Collaborate with senior engineers on various projects.

• Assist in the planning and execution of electrical engineering tasks.

• Participate in site visits to assess project progress and gather data.

2. Testing and Troubleshooting:

• Perform testing and troubleshooting of electrical systems and equipment.

• Help diagnose and resolve electrical issues in a timely manner.

3. Compliance and Safety:

• Ensure that all engineering work adheres to relevant safety standards and regulations.

• Participate in safety audits and implement corrective actions as needed.

Requirements ( Only Singaporean or Singapore PR should apply )

1. Educational Background:

• Minimum Diploma in Electrical Engineering or a related field.

2. Technical Skills:

• Proficiency in electrical design software (e.g., AutoCAD, MATLAB, or similar).

• Strong understanding of electrical principles and circuit design.

• Knowledge of industry standards and regulations.

3. Experience:

• Previous internship or co-op experience in electrical engineering is preferred but not required.

4. Problem-Solving Skills:

• Ability to diagnose and resolve technical issues effectively.

5. Communication Skills:

• Strong written and verbal communication skills.

• Ability to work well in a team and collaborate with other departments.

Job Description:-

* Preparing, scheduling, coordinating and monitoring the assigned engineering projects

* Perform overall quality control of the work (budget, schedule, plans, personnel’s performance) and report regularly on project status

* Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support

* Assign responsibilities and mentor project team

Requirements:-

* Excellent knowledge of design and visualisations software such as AutoCAD

* Familiarity with rules, regulations, best practices and performance standards

* Project management and supervision skill

* Time management and organization skills

* diploma/degree in Engineering or relevant field

Job Responsibilities

• Understand customer needs and requirements to develop effective quality control processes.

• Devise test plan and review specifications for products or processes.

• Work closely with engineering team to improve product quality based on testing results & critical component qualification process.

• Develop exceptional handling test cases to ensure the robustness of the system during alternative scenarios.

• Manage the qualification of new and existing suppliers/input materials.

• Keep accurate documentation and perform statistical analysis.

• Submit detailed reports to appropriate executives.

• Inspect final output and compare properties to requirements.

• Keep on standards, regulations/laws, issues, and news with respect to product quality.

• Ensure adherence to health and safety guidelines as well as legal obligations.

• Other duties as assigned.

Job Requirement

• Conscientious and responsible.

• Experience in Quality Assurance/Quality control

• A keen eye for detail and a result driven approach

• Outstanding communication skills and leadership skills

• Excellent organizational and presentation skills

• Proficient in MS Office, Statistical Tools.

• Strong knowledge of calibration and ability to read design drawings.

• In depth understanding of quality control procedures and relevant legal standards.

• Excellent math abilities and working knowledge of data analysis/statistical methods.

• Diplomas/BSc in Engineering or relevant field/ fresh graduates are welcome to apply.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

What You Will Do

• Maintain and support wafer test equipment or metrology tool readiness in the fab
• Perform preventive maintenance (PM) and troubleshooting of wafer test equipment
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed
• Tool types: KLA, AMAT, ONTO, or Unity

What You Will Need

• Bachelor’s Degree in engineering or equivalent
• 5 years of relevant experience in equipment engineering, preferably in a wafer fab / Electronics / Electrical industry
• Proven ability to identify, assess and solve problems
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction :

Development of FET device models for advanced RF/mmW design applications such as RF/mmW PA and LNA.

Job Description:

• Development of RF/mmW FET transistor model using industry standard models, e.g., BSIM.
• Support characterization and data analysis for FET device at DC and RF/mmW frequency range.
• Work with fab device team to interpret DC/RF characteristics and debug device issues.
• Perform RF/mmW simulation and prepare model-hardware correlation (MHC) report.
• Participate in customer engagement discussion and circuit issue de-bugging.

Required Qualifications:

• BS, MS or PhD in Electrical and Electronic Engineering, or related field.
• BS with 5 years of experience, MS with 2 years of experience, PhD with 0 year of experience.
• Experience in DC/RF/mmW device modeling (ADS, ICCAP, Cadence Virtuoso, etc.), RC parasitic extraction tools, device layout CAD tools, and DC/RF/mmW device/circuit characterizations would be preferred. Having RF/mmW circuit designs experience would be an added advantage.
• Project management skills, i.e., ability to innovate and execute on solutions that matter.
• Fluency in English Language – written & verbal.

Preferred Qualifications:

• Master Degree in Electrical/Electronic/Material Engineering
• PhD in Electrical/Electronic/Material Engineering

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Singapore will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Your Job

Maintain and support equipment readiness Typically performs one or more of the following in capacity of either an individual contributor (as directed and/or independently), or as a manager:

• Perform preventive maintenance (PM) and troubleshooting of equipment
• Execute maintenance and tool support ensuring equipment readiness
• Troubleshoot and upgrade of equipment ensuring minimize downtime
• Analyze and monitor technical charts
• Drive equipment improvement plans and projects
• Ensure and follow good safety practices and custody of tools, equipments and other properties
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements
• Work and collaborate other projects and/or assignments as needed

Requirements

• Minimum Degree in electrical/electronics/mechanical engineering or equivalent qualification
• 10-12 years of relevant work experience in etch equipment engineering
• Proven ability to identify, assess and solve problems
• Analytical with good interpersonal skills
• Good interpersonal and communication skills
• Good team player and has strong leadership qualities
• Good analytical and problem-solving skills
• High Integrity

About GlobalFoundries

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices that are pervasive throughout nearly every sector of the global economy.

Our advanced operational and technology capabilities are made available through a global manufacturing network, anchored by facilities in Singapore, Dresden (Germany), Burlington (Vermont) and Malta (New York).

Environmental sustainability is imperative to GF. We are committed to green thinking in our manufacturing and operations, and this is reinforced through our Journey to Zero Carbon goal to reduce total greenhouse gas emissions by 25% by 2030. With over 15,000 employees worldwide, we believe in creating a culture of inclusion that taps on our rich, multi-cultural diversity to drive better business outcomes.

At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. GF is delivering a new era of more. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Responsibilities:

• Coordinate Mechanical and Electrical
• Services with consultants and subcontractors on site.
• Check MEP drawings coordination for discrepancies with architectural & structural drawings.
• Ensure installations are carried out according to plans
• Review M&E drawings and lookout for discrepancies between actual progress work and approved drawings
• Plan all drawings request to meet the submission deadline.
• Oversee all related M&E issues on site.
• Any other ad-hoc

Requirements:

• Experienced in coordination and supervision of M&E services and/or building-related works for commercial building in Singapore
• Diploma in Industrial / Building
• Service Engineering / Construction or any relevant M&E Certification