SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

Electrical PLC Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Use Siemens S7-400 PLC to do the HVAC System PLC program. Experience in CPU Redundancy, Modbus Communication Redundancy.
8. Use S7-1200 PLC to do the HVAC Control System PLC program
9. Use Siemens HMI software to do the Touch Screen Program.
10. Fully understood HVAC System D & ID, P & ID.
11. Marine and Offshore commissioning experience are required.
12. Sometimes will go to site trouble shooting.
13. Contact with client about the project requirement.
14. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Electrical Engineer

1. Experienced Electrical Design Engineer For HVAC System
2. Report to Engineering Department Electrical Manager.
3. Complete project independently from Receive Project’s specification, Design, Issue and submit drawing, Update the comments from client, FAT, SAT.
4. Issue Wiring Diagram & Termination Drawing for HVAC Control Panel, Include Chiller Unit, Air Condenser Unit, AHU, Cold Room Provision Plant by use Auto Cad software.
5. Issue Documentation for Electrical & Instruments. Include Block Diagram, Control Philosophy, Cause & Effect Control Philosophy, Power Loading List, FAT testing procedure, Control Panel General Arrangement Drawing, Junction Box Drawing.
6. Choose electrical element and Instrument based on project requirement.
7. Fully Understand PLC control system.
8. Fully understood HVAC System D & ID, P & ID.
9. Marine and Offshore commissioning experience are required.
10. Sometimes will go to site for trouble shooting.
11. Contact with client about the project requirement.
12. Contact with supplier about the control panel, Electrical Component and Instrument requirement.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

Responsibilities:

· Deliver top-notched technical solutions to clients and take responsibility for the standards of work with client centric mindset.

· Take responsibility for a portion of an installation, break/fix incidents, and problem management.

· Learn to utilize automated mediums to perform staging, pre-loading configurations, and onsite deployment, ultimately enhancing proficiency in automation.

· Work together and collaborate with the Implementation Engineering team to fulfil client requirements

· Attend less complex configurations, installations, and break/fix events.

· Analyse security-related information and events, escalation of incidents for validation and remediation

· Flexible working hours may include occasional overtime or shifts outside of traditional business hours

· Design and implement firewall solutions such as Palo, Checkpoint, Fortinet or Cisco.

Requirements:

· Bachelor’s Degree, preferably in Computer Science, Information Technology or related field

· At least than 3 years of working experience

· Strong in interpersonal skills

· Has excellent verbal/written communication and presentation skills

· Ability to prioritize work independently and work under pressure to meet deadlines

· Team player, resourcefulness, strong analytical skills is an advantage

· Knowledge in the following area may be advantageous:

· Basic cybersecurity design and principles and Routing or Switching technology

· TCP/IP or Firewall, Intrusion prevention concepts

· Project management methodologies

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Conduct regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• Involved in preparing relevant QA/QC reports
• INvolved in implement QA/QC plans and ensure PPVC quality before delivery
• Ensure the functionality of the product before handing over to buyers
• Assist in preparing for QM submissions
• Assist in yearly ISO audits
• Assess, feedback on the construction process and procedures
• Execute quality control as per site specific materials and Works Quality Plan.
• Conduct relevant training for sub-con and internal staff.
• Issuance and handling of Site Memo.
• Monitor undertaken corrective and preventive actions against non-conformities.
• Arrange and liaise with BCA for CONQUAS/QM assessments.
• Recommends solutions for critical and/or frequent recurring defects to Project Team.
• Ensure all the method statement used has obtained approval from the clients and consultants.
• Follow-up all the required tests as per contract requirement.
• Attend regular site meetings – QAQC, Landscape Coordination Meeting and Client Meeting.
• Attend off-site inspection – Precast and Structural Steel Works (Malaysia and Singapore Factory)
• Follow the developer’s Quality Inspectors (QI) and Customer Service Officers (CSO) for inspection prior to building handover to owners.
• Attend to client ’s defects during Defect Liability Period.
• Assisting in handover of the common areas to management team.

Job Requirements:

• Min Diploma or Degree related to QA/QC or Engineering / Construction related field
• Prior experience related to construction industry (HDB, Condominium projects etc.) is added advantage
• Good knowledge of construction quality control/assurance is necessary

Engineer/Senior engineer (Fire protection)

Job Description

Duties & Responsibilities:

• Supervise subcontractors based on shop drawings and method statements.
• Collaborate with authorities and clients on materials and samples.
• Review fire protection design drawings for compliance (e.g., Sprinkler, Fire Alarm).
• Identify discrepancies in M&E, structural, and architectural provisions.
• Manage project execution and attend contractor meetings.
• Review compliance of drawings and allocate tasks to supervisors.
• Plan and lead testing of fire protection systems.
• Coordinate site inspections and rectify defects.
• Prepare manuals and as-built drawings for client handover.

Education / Experience / Skills:

• Degree or Diploma in Mechanical Engineering/Building Services.
• Minimum 5 years of relevant experience.
• Proficient in MS Office with strong communication skills.
• Experience with Water Mist or Foam systems is a plus.

Our client is a global manufacturer. Due to business needs, they are now recruiting a Finance Automation Specialist to be part of their Finance team for ongoing transformation projects. They are located in the North Area - easily accessible.

Responsible of Finance Automation Specialist:

• Spearheads the streamlining, enhancement, and automation of essential financial processes using programming tools, business intelligence software, or LCNC (low-code/no-code) platforms.
• Aligns with the department's strategic goals, operations, and workflows to actively identify opportunities for process improvements and optimization.
• Develops process maps and crafts improvement plans that translate into comprehensive functional requirements for execution.
• Collaborates with business process owners across various departments to analyze current systems and workflows, addressing process-related challenges through automation and integration to enhance operational effectiveness and ensure compliance with audit standards.
• Provides support for special projects and initiatives as required.

Requirement:

• 3 years of experience in executing finance transformation projects.
• Strong IT skills, with hands-on experience in process automation tools (e.g., Python, Power Query, VBA).
• Bachelor’s degree in Finance, IT, or related fields.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is a Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quotation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Review and comprehend technical requirements outlined in customer tender documents.
• Coordinate with internal teams to collect essential data for proposal development.
• Provide technical expertise during tendering and quotation processes/activities and support the sales and marketing team with relevant engineering insights.
• Prepare cost breakdowns and delivery schedules to assist the sales and proposals team in responding to inquiries.
• Draft and compile technical documentation, such as datasheets, proposal designs, clarification notes, and responses to tender specifications.
• All other ad-hoc duties as assigned.

Requirements

• Min Degree in Relevant Qualification in Engineering or equivalent.
• Min 5 years relevant working experience.
• Proficient in Microsoft Office and CAD software.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Ensure machines are prepared, set up, and qualified before crating for shipment from the factory to customers.
• Provide occasional on-site service within Singapore and internationally as needed.

Requirements:

• Diploma in Mechatronics
• At least 2 years of working experience in mechanical/electrical control system.
• Good understanding of machinery automation with electrical, servo, sensor, pneumatic system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Job Responsibilities:

• Directs, manages, and optimizes two plants or production facilities’ overall operations and financial performance (P&L)
• Sets policies and procedures that guide plant operations' productivity, quality, and cost efficiency
• Organize the factory's mid-to-long-term plan and annual work plan
• Take overall responsibility for the management and formulation of the factory’s production line
• Ensure the production progress, and be responsible for the company's total production capacity, quality, and production efficiency
• Systematically collects operational metrics to analyze productivity and set performance targets to meet revenue and cost goals
• Supports the development and deployment of manufacturing practices focused on quality and continuous improvement
• Approves policies developed within various sub-functions and departments
• Direct Operations by ensuring that teams work closely to analyze the demand and develop production strategies, including supply chain, product rationalization, material flow, information flow, manpower staffing, and equipment to meet Customer requirements
• Troubleshoot process-related problems and formulate a corrective action plan to avoid recurrence of shortcomings in the processing line.
• Drive industrial relations harmony and accountability for all plant KPIs and ensures adequate training and development at all staff/operations levels
• Oversees multi-functional plant teams including finance, engineering, materials, quality assurance, and human resources
• Take on other responsibilities as may be reasonably assigned to you by your superiors from time to time

Job Requirements:

• Tertiary education
• Willing to be based in Vietnam. Prior experiences based in China or overseas will be preferred
• At least 10+ years of experience in manufacturing and has a deep understanding of factory production and manufacturing management processes, management methods and models
• Familiar with products in the fields of furniture/kitchen cabinet (sofas / wood / textiles) will be an advantage
• Familiar with the requirements of the quality management system
• Proficiency in English and Chinese communication and writing as required to liaise with China manufacturing plants as well
• Strong analytical, leadership, and communication skills
• Possess strong business acumen and operations process driven
• Strong stakeholder management capability

Interested candidates, submit MS Word resume to [email protected] or contact +65 62251232

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 6.30pm

Job Responsibilities:

• Lead and supervise a team of QC inspectors overseeing daily QC inspections activities in compliance with established standards
• Provide training, coaching and mentoring to enhance the skills and performance of team members
• Prepare and maintain work schedule for the department to ensure optimize resource for overall efficiency
• Work with cross-functional teams to implement continuous improvement, track status of non-conformities and CAPA effectiveness
• Responsible for review and approval of DHR. Ensure quality records and samples are retained complying with good writing practice GDP requirements
• Implement quality documentation changes, such as QC procedures, process workflows, work instructions, etc. Guide the team to follow through the change
• Review and submit validation or verification measurement reports
• Perform daily process audit to meet quality operational requirements
• Ensure product identification and traceability of product are in place
• As calibration administrator, ensure equipment are calibrated correctly, provide accurate measurements and having proper identification
• Assist in customer complaint analysis, investigation of quality issues and corresponding improvement measures
• Authorize the release (COC) of products, COA review and approval
• Adhere to safety protocols and implement preventive measures to maintain a safe working environment
• Monitor and report KPI of QC team job performance, production quality trends, quality control charts, etc.
• Any other tasks as assigned by the superior

Job Requirements:

• Possess minimum professional certification / Diploma / Degree in relevant subject area
• Working knowledge on ISO13485:2016 and quality assurance / quality control of medical devices is an added advantage
• Familiar with use of various quality control tools and test equipment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Review of enquiries and contract tenders
• Attending meetings with tender pursuit team and identify responsibilities, required inputs and key dates
• Review of all information relating to bid, clarification of responses received from internal support departments and insertion of qualifications into bid document as appropriate
• Gathering support information from internal drives for insertion

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

• Responsible for the supply and demand planning activity within the SEA region.
• Identify appropriate planning categories for the varied portfolio.
• Create timely trend analyses, insights and business recommendations.
• Carry out regular risk assessment for the demand and supply planning functions.
• Monitor and review any gaps in the performance of a portfolio of suppliers and recommends improvements by suppliers to better meet demand requirements.

Requirements:

• Degree in Supply Chain Management or equivalent
• At least 5 years of experience in Supply Planning function in the Manufacturing industry of Marine/Defence/Aerospace.
• Excellent leadership and organizational skills.
• Proficient in MRP system and MS Excel.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Review of enquiries and contract tenders
• Attending meetings with tender pursuit team and identify responsibilities, required inputs and key dates
• Review of all information relating to bid, clarification of responses received from internal support departments and insertion of qualifications into bid document as appropriate
• Gathering support information from internal drives for insertion

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)
Recruit Express Pte Ltd (EA Licence No: 99C4599)

Job Description:

• Collaborate with hiring managers on full-cycle talent acquisition for contract positions in Singapore.
• Work closely with hiring managers to understand and define talent needs, develop recruitment strategies, and create effective hiring plans for contract roles.
• Manage contracts, including renewals and replacements.
• Handle recruitment and hiring for internship positions, and assist in organizing monthly internship engagement events and the internship graduation ceremony.
• Participate in job fairs to attract top talent.
• Provide support for general HR functions, including operations, compensation and benefits, and talent and organizational development processes.
• Contribute ideas for organizing HR data and simplifying PowerPoint presentations.
• Utilize various recruitment channels cost-effectively, identifying the most suitable sourcing methods, handling resume screening, job postings, and internal referral updates.
• Assist in drafting and designing quarterly HR Newsletter highlights for Singapore employees.

Job Requirements:

• Bachelor’s degree in Human Resources, Business, or a related field.
• Minimum 2 years of experience in end-to-end recruitment, preferably in engineering, chemical, or water industries.
• Strong communication skills, with the ability to build relationships with candidates and internal stakeholders while managing hiring managers' expectations.
• Experience in internship recruitment and networking with universities and polytechnics.
• Proficiency in digital tools and technologies, including PowerPoint, Visier, and Workday.
• Ability to manage high-volume hiring efficiently and effectively.

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Responsibilities

• Service, upsell and built rapport with existing customer accounts within semiconductor industry
• Create targeted marketing strategies and campaigns for specific products or product lines to solidify market presence and differentiate them from competitors.
• Formulate business plans and strategically position products in the marketplace.
• Conduct market research, keep track of competitors’ activities, and assess customer needs to inform business decisions.
• Develop pricing frameworks, collaborate with engineering, manufacturing, and sales teams to launch new products or improve existing ones.
• Prepare and negotiate pricing quotes, finalize terms, and ensure documentation is ready for order processing.
• Oversee follow-ups on outstanding accounts receivables.
• Present company product roadmaps and capabilities to customers while conveying customer technology requirements to relevant business units.
• Maintain comprehensive records of all customer engagements and develop tailored action plans with timely execution.
• Build relationships with both potential and current customers to identify and address their service needs.
• Work with business unit representatives to set the annual sales budget.

Requirements:

• Bachelor’s degree in Engineering or a related field.
• Minimum of 2 years of relevant experience within the semiconductor industry.
• Willingness to travel overseas and work extended hours on challenging sales projects.
• Excellent communication and interpersonal skills.
• Detail-oriented, organized, and a proactive team player.
• Self-motivated and capable of working independently with minimal oversight.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXW39YVY

Oversee and Manage HR Operations:

• Ensure smooth administration of the employee life cycle, including onboarding and offboarding processes.
• Oversee employee benefits and payroll administration.
• Manage the employee grievance handling process.
  

Identify Improvement Opportunities through HR Analytics:

• Develop HR data collection strategies and provide insights and recommendations to senior management.
• Perform data analysis to guide decision-making and align with business objectives.
  

Define and Develop Workforce Plans:

• Lead the annual headcount and budget planning exercise.
• Monitor manpower costs to meet company key goals and initiatives (KGI).
• Report and address anomalies in employee behavior and workplace environment, offering solutions.
  

Drive Talent Acquisition and Management:

• Collaborate with stakeholders to oversee the talent acquisition process.
• Manage performance management and succession planning.
• Work with senior management on employee progression processes.
  

Manage Compensation Practices:

• Oversee offer packages and compensation-related processes.
• Review salary structures to ensure market competitiveness.
• Manage the annual salary review and performance-based compensation.

Develop and Deploy Employee Value Proposition (EVP) Initiatives

• Oversee employee communication channels and drive monthly assemblies/town halls.
• Promote EVP through leadership engagement and team-building activities.
• Ensure EVP initiatives meet the evolving needs of the talent pool.
  

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

• Responsible for the supply and demand planning activity within the SEA region.
• Identify appropriate planning categories for the varied portfolio.
• Create timely trend analyses, insights and business recommendations.
• Carry out regular risk assessment for the demand and supply planning functions.
• Monitor and review any gaps in the performance of a portfolio of suppliers and recommends improvements by suppliers to better meet demand requirements.

Requirements:

• Degree in Supply Chain Management or equivalent
• At least 5 years of experience in Supply Planning function in the Manufacturing industry of Marine/Defence/Aerospace.
• Excellent leadership and organizational skills.
• Proficient in MRP system and MS Excel.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

About Our Client

• Industrial Machinery Manufacturing @ North East
• Mon - Fri, Normal Working Hours

Job Description

• Develop and execute sales strategies to achieve revenue targets
• Drive business development, build strong client relationships, and identify new market opportunities
• Conduct monthly trips to China for client meetings and supplier engagement
• Collaborate with internal teams to align sales goals with manufacturing capabilities
• Monitor market trends, prepare sales reports, and provide insights to management

Requirements:

• 8-10 years of sales experience in silicone rubber, metal, and plastic injection products
• Knowledge of manufacturing processes and consumer/ medical product industries
• Strong negotiation, communication, and client management skills.
• Willingness to travel monthly to China and work independently.

Reach out

Please submit your updated resume by using the APPLY NOW button

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to Kanry Search Singapore Pte Ltd’s PDPA and e2i’s PDPA.”

Kanry Search Singapore | 24C2261

Sarah Lau | R22110930

Salary: up to $2200

Duration: 3+3 months

Working Days & Hours: Mon-Fri office hours

Location: Clementi

Job Description:

1. To pack finished goods and raw material at the Fragrance, Cosmetic Ingredient and Oral Care plants at Scent & Care Division.

2. The training requirements for the new contract technician will be as follows:

2.1.To be competent to pack finished goods from less than 1000-litre mobile vessels into 1-, 5-, 10-, 25- and 200-kg drums (approx. 3 weeks of OJT).

2.2.To be competent to pack finished goods from 3000-litre fixed tanks into 25- or 200-kg drums, using mechanical pumps, and including doing tank cleaning using automated CIP (Cleaning-in-place) process after packing (approx. 3 weeks of OJT).

2.3.To be competent to pack finished goods from 10000-litre fixed tanks into 25- or 200-kg drums using diaphragm pumps, and including doing tank cleaning using automated CIP (Cleaning-in-place) process (approx. 2 weeks of OJT).

2.4.During the training period and after acquiring the skills sets, the contract technician can be rotated among the Fragrance, Cosmetic Ingredient and Oral Care plants for training.

2.5.Compounding at Fragrance, Oral Care and Cosmetic Ingredient plants (approx. 10 weeks of OJT).

3. During the training period, the contract technician will be paired up with a senior technician for OJT (On-the-job) training on a buddy system.

Job Requirements: Min GCE A Level / Diploma in Science/Engineering or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]